How To Calculate Sum For Distinct Values In MDX
Jul 27, 2007
Hi ALL,
I need help in calculating sum of market value based on property_id. The sum should be calculated by finding the average market value for a given property and then sum the individual average of the property to get the Distinct sum.
I have a very little knowlegde in Cubes and analysis services. I need to perform this distinct sum by using calculated members using MDX on SQL server 2000.
Data example
P_Code Cus Prpty_IdMrkt Val
3000 1234 1111 $10,000 $10,000
3000 1234 2222 $20,000
3000 1234 3333 $30,000 $20,000
3000 5678 1111 $10,000
3000 5678 2222 $20,000 $30,000
3000 5678 3333 $30,000
3000 1020 1111 $10,000
3000 1020 3333 $30,000
Distinct Sum $60,000
Thanks in Advance
Brijesh
View 2 Replies
ADVERTISEMENT
Jan 9, 2015
Okay, I've been working on this for a couple of hours with no success. I'm trying to find the number of telephone numbers that are associated with multiple students at different school sites. I've created a temp table that lists all phone numbers that are associated with more than one student. I'm now trying to query that table and count the number of telephone numbers that are associated with more than one site. Essentially, I'm looking for parent/guardians that have students at different sites.
Here's an example of what I'm hoping to accomplish:
*In this example, I'm just trying to get a count of the different/distinct school sites associated with each number. If I can, at the same time, limit it to a count of > 1 (essentially excluding parents with students at the same site), even better :)
===================================
Temp table
===================================
SCHOOL | STU_ID | STU_PHONE
101 | 12345 | 111-222-3333
101 | 23456 | 111-222-3333
102 | 34567 | 111-222-3333
101 | 45678 | 999-888-7777
101 | 56789 | 999-888-7777
101 | 67890 | 555-555-5555
102 | 78901 | 555-555-5555
103 | 89012 | 555-555-5555
==================================
Wanted query results
==================================
STU_PHONE | #Students | UNIQUE_SCHOOLS
111-222-3333 | 3 | 2
999-888-7777 | 2 | 1
555-555-5555 | 3 | 3
View 1 Replies
View Related
Sep 7, 2015
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
View 2 Replies
View Related
Mar 10, 2008
I am trying to create a report in SRS that will calculate a Composite Score based on the Sum of other scores and then that Sum is divided by 12.
Here is a copy of the Query I have created to calculate the numbers I want to use, but when I create the expression in SRS the calculations don't come out correctly. The expression that I use in SRS is at the bottom of the Script.
Thanks in Advance
--6 Trait_03052008.sql
--Pull test scores for 6 Trait out of Campus for SRS reports.
SELECT s.lastname+','+' '+s.firstname AS Student, e.grade, sm.lastname+','+' '+sm.firstname AS Teacher, sc.name AS School,
t.name AS Test, t.code, ts.rawscore,
CASE WHEN t.name = '1 Ideas' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric)END AS IComp,
CASE WHEN t.name = '2 Organization' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 3 AS Numeric) END AS OComp,
CASE WHEN t.name = '3 Voice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS VComp,
CASE WHEN t.name = '4 Word Choice' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore * 2 AS Numeric)END AS WComp,
CASE WHEN t.name = '5 Sentence Fluency' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric) END AS SComp,
CASE WHEN t.name = '6 Conventions' AND ts.rawscore IS NOT NULL THEN CAST(ts.rawscore AS Numeric)END AS CComp
FROM testscore ts
JOIN student s ON s.personid = ts.personid
JOIN roster r ON r.personid = s.personid
JOIN test t ON t.testid = ts.testid
JOIN calendar ca ON ca.calendarid = s.calendarid
JOIN enrollment e ON e.enrollmentid = s.enrollmentid and e.calendarid = ca.calendarid
JOIN section se ON se.sectionid = r.sectionid
JOIN course c ON c.courseid = se.courseid AND c.calendarid = ca.calendarid
JOIN school sc ON sc.schoolid = s.schoolid
JOIN staffmember sm ON sm.personid = se.teacherpersonid AND sm.schoolid = ca.schoolid
WHERE t.code LIKE '6%' AND c.calendarid =50 AND c.homeroom = 1
GROUP BY s.lastName,s.firstName,e.grade,sm.lastName,sm.firstName,sc.name,t.name,t.code,ts.rawScore
ORDER BY [Student], t.code, t.name DESC
Expression being used in SRS to calculate the Composite Score.
=SUM(Fields!IComp.Value)+(Fields!OComp.Value)+(Fields!VComp.Value)+(Fields!WComp.Value)+(Fields!SComp.Value)+(Fields!CComp.Value)/12
View 4 Replies
View Related
Apr 18, 2008
I need to calculate the datediff in minutes between Date1 and the lesser of Date2, Date3, Date4 (whichever came first)
View 3 Replies
View Related
Jan 17, 2007
I am building a customerlist within the customer sales of a period. I have a dataset with two tables: "customer" and "customer_ledger_entry".
In the report I will present the customer number, the customer name and the sales. The problem is the sales value is not available as a field, but I have to calculate this value from the "customer_ledger_entry" table. In this table are several entries (invoices, credit notes, etc.)
How to calculate the values from a underlying table?
View 6 Replies
View Related
Jul 11, 2014
I've the table like
create table accutn_det
(
fs_locn char(50),
fs_accno varchar(100),
fs_cost_center varchar(100),
fs_tran_type char(50)
[Code] .....
Like all location details stored from all months in these table
here Dr=debit,Cr=Credit Formula= 'Dr-Cr' to find the salary wavges of amount
so i made the query to find the amount for may
select
fs_locn,
fs_accno,
amount=sum(case when fs_accno like 'E%' and fs_tran_type='Dr' then fs_amount
when fs_accno like 'E%' and fs_tran_type='Cr' then fs_amount * -1
end
)
from
accutn_det where fs_trans_date between '01-may-2014' and '31-may-2014'
groupby fs_locn,fs_accno
now i need the sum values of all costcenter for the particular account.how to do that?
View 9 Replies
View Related
Feb 28, 2015
Have a bit of an SQL challenge in that I need to create a well performing view in SQL2008R2 which calculates hours remaining at any given point in time. This is not a simple sum but has some absolute values included.
---------------------------------------------------------------------------------------------------
-- Basic simplified structure of maintenance and usage tables
---------------------------------------------------------------------------------------------------
CREATE TABLE #Maintenance (Id int NOT NULL
IDENTITY(1, 1)
CONSTRAINT PK_Maintenance PRIMARY KEY,
MaintenanceDate smalldatetime NOT NULL, -- When maintenance hours are reset
HoursAvailable numeric(5, 1) NULL -- Available hours until next maintenance
)
[Code] ....
---------------------------------------------------------------------------------------------------
-- Required output view so that at any given point in time I can determine hours remaining
---------------------------------------------------------------------------------------------------
-- AtDate HoursAvailable
-- '01-Jan-2015 15:00' NULL -- before first maintenance hence unknown
-- '10-Jan-2015 10:00' 10.1 -- maintenance hours reset
-- '11-Jan-2015 07:30' 8.9 -- subtract 1.2
-- '11-Jan-2015 11:10' 2.9 -- subtract 6.0
-- '15-Jan-2015 00:00' -0.1 -- subtract 3.0
-- '01-Feb-2015 00:00' 12.2 -- maintenance hours reset
-- '02-Feb-2015 13:00' 10.0 -- subtract 2.2
View 4 Replies
View Related
Jun 15, 2015
I have one table
Customer ID; Sort of Transactions;Value
1234;Kit;1
1235;Kit;1
1236;Revenue;30
1235;Kit;2
1238;Revenue;10
1235 ;Kit;1
Looking for a formula for calculated column, which gives me sum of "Kit" for Customers
1234;Kit;1;1
1235;Kit;1;4
1236;Revenue;30;0
1235;Kit;2;4
1238;Revenue;10;0
1235 ;Kit;1;4
View 2 Replies
View Related
Jul 14, 2015
I have a data set as -
ID Set Date DB Date
100 Null 07/01/15
100 07/05/15 07/02/15
100 07/10/15 07/08/15
I want to able to get 2 unique dates
1. 07/02/15 - As I want the DB date for ID - 100 when set date changed from a null value to non null value.
2. 07/08/15 - As I want the DB date for ID - 100 when a non null set date changes.
The table has such records for lot of different ID's.
View 29 Replies
View Related
Feb 25, 2014
I'm using this query to to calculate yearly finance values.
select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance]
Now I need to multiply the [FinanceValue Variance] * 2.50 and for that how can I use the alias name as column in the query. I tried this but it says invalid column name.
select [Year],[FinanceValue-2014],[FinanceValue-2013],[FinanceValue-2012],[FinanceValue- 2014]-[FinanceValue-2013] as [FinanceValue Variance], [FinanceValue Variance] * 2.50 as [NewVariance] from Finance
SumofVariance output will be like 5690.5893656 Also how can I show the SumofVariance to round off 4 decimal places like this 5690.5894.
View 1 Replies
View Related
Feb 7, 2008
This code displays dates, File name, and File size for four seperate dates 11/20/2007 , 11/30/2007, 12/30/2007 and 01/31/2007 . I'm trying to show the percentage growth from date to date (ie 11/20/2007 -11/30/2007 percentage growth)
is there a way i can get the previous date file size for each entry, so i can have a variable for the calculation. Or i can get the calculate it within this code (ie database_size_mb / ((database_size_md ) where database_size_datetime -1) *100
or whatever the formula is for percentage growth.
Code Snippet
SELECT
Database_Size_Datetime,
Database_file_name,
Database_Size_Mb
FROM RC_STAT.dbo.Tbl_Database_Statistics AS Tbl_Database_Statistics_1
GROUP BY Database_Size_Datetime, Database_file_name, Database_Size_Mb
this is what it displays now:
2007-11-20 00:00:00.000 ACTReplication_Data 442.5000
2007-11-30 00:00:00.000 ACTReplication_Data 442.5000
2007-12-31 00:00:00.000 ACTReplication_Data 442.5000
2008-01-31 00:00:00.000 ACTReplication_Data 442.5000
2007-11-20 00:00:00.000 ACTReplication_Log 14.8125
2007-11-30 00:00:00.000 ACTReplication_Log 109.7500
2007-12-31 00:00:00.000 ACTReplication_Log 112.9375
2008-01-31 00:00:00.000 ACTReplication_Log 115.5625
2007-11-20 00:00:00.000 BAMArchive 0.6875
2007-11-30 00:00:00.000 BAMArchive 0.6875
2007-12-31 00:00:00.000 BAMArchive 0.6875
2008-01-31 00:00:00.000 BAMArchive 0.6875
2007-11-20 00:00:00.000 BAMArchive_log 0.4922
2007-11-30 00:00:00.000 BAMArchive_log 0.4922
2007-12-31 00:00:00.000 BAMArchive_log 0.4922
2008-01-31 00:00:00.000 BAMArchive_log 0.4922
View 1 Replies
View Related
Nov 17, 2006
Hi, i hope i'm asking this on the right forum.
My problem is:
I need to select only distinct columns from a table, for this i can use: "select distinct username from table_user" but this is not working each time .... someone told me that i can use "alias" ... what does this means and how can i use alias for geting only distinct usernames from my table???
hope that is here someone that can help me ... !
10x
David Palmer SQL Manager
View 4 Replies
View Related
Jun 3, 2004
I am trying to create a procedure which will calculate the total tuition
This process involves 3 tables.
Contract table has tuition information which is all $100 (set price).
Discount table has discount type and discount percentage (ex. 0.3) on each discount type.
ContractDiscount table have contract number and discount number to connect both tables
I think I need to create a loop since some contract gets more than one discount.
I have to calculate and get result nee to be like this
total_tuition = (tuition - discountPer * tuition) - this has to be a loop condition
Do you have any suggestion ?
Thanks
View 3 Replies
View Related
Nov 25, 2014
SQL query to calculate the total on-peak and off-values for a month as well as the Max/highest on-peak/offPeak hourly value for that month.
On a daily basis i store the hourly values of the meter in a SQL table.
On-Peak
Summer: Apr-Oct hours(7-22) on weekdays (M-F)
Winter: Nov-Mar hours(8-23) on weekdays (M-F)
off-Peak
Summer: Apr-Oct hours(0-6,23,24); Weekends (Saturday & sunday) ; all public holidays during those months as to be considered as off peak
Winter: Nov-Mar hours(0-7,24);Weekends (Saturday & sunday); all public holidays during those months as to be considered as off peak
Here is the DB Table Structure:
Column Name & Data Types
HourId - Uniqueidentifier
CustomerName - nvarchar(50)
Readingdate - datetime
IntegratedHour - TinyInt
Load - decimal(18,4)
Generation - Decimal (18,4)
LastModified - Datetime
ModifiedBy - nvarchar(50)
View 9 Replies
View Related
Oct 13, 2015
I am trying to write a query to calculate the running difference between data on different dates. Below is what my table of data looks like. Basically I want to calculate the difference between the total_completed for each state and date.
DateStatesTotal_Completed
08/27/15CA 19,952
09/11/15CA 26,336
10/02/15CA 35,444
10/08/15CA 38,278
08/27/15CO2797
09/11/15CO3264
10/02/15CO4270
10/08/15CO4297
below is what I am trying to achieve:
DateStatesTotal_CompletedCompleted_Difference
08/27/15CA 19,952 0
09/11/15CA 26,336 6,384
10/02/15CA 35,444 9,108
10/08/15CA 38,278 2,834
08/27/15CO27970
09/11/15CO3264467
10/02/15CO42701,006
10/08/15CO429727
below is my code (I almost have what I need) I just can't figure out how show 0 as the completed_difference for the first Date for each state since there is no prior date to calculate against.
MRR_TOTALS_WEEK_OVER_WEEK AS
(
SELECT
T1.[Date]
,T1.States
,T2.Total_Completed
,ROW_NUMBER() OVER(PARTITION BY T1.States ORDER BY T1.States,T1.[Date]) AS ORDERING
FROM TOTAL_CHARTS T1
LEFT JOIN TOTAL_COMPLETED T2 ON T1.[Date] = T2.[Date] AND T1.States = T2.States
)
[code].....
View 4 Replies
View Related
Aug 31, 2015
Developing a measure which displays the difference of two values from the selected years.
An example : Show the difference of the sales amount from 2013 and 2015.
Since i am not really into mdx or calculated members.
View 6 Replies
View Related
May 4, 2007
Hi,I am trying to output a list of data from a table, showing only one record of each TypeID.So, for instance, I have a simple SQL query that says:SELECT DISTINCT AlbumTypeID FROM Album
ORDER BY AlbumTypeID DESCThis works correctly, and gives a list of 1,2,3. But I need more information than that, I want the Description field output with the ID, but how can I do this without assigning that to be Distinc also?When I try: SELECT DISTINCT AlbumTypeID, Description FROM Album ORDER BY AlbumTypeID DESCThe output is completely wrong.Many thanks
View 11 Replies
View Related
Aug 30, 2013
I want to get the summation of the amount column against all the distinct values of Description fields. May be the "Where" (applied on Tdate Column) Clause unable to contains all the Unique(Distinct) values from the single Column (Description).
Table Structure :
CREATE TABLE [dbo].[TransLine](
[TransID] [int] NULL,
[No] [int] NULL,
[Description] [varchar](50) NULL,
[Code] ....
Sample data : [URL] ....
View 5 Replies
View Related
Jun 25, 2014
I have a problem when selecting distinct values from a table. I want to select those distinct numbers with a code that I want. To make it more clear i`ll show it on an example.I have the following table:
tel_no | code | id_res
+-----------+--------------+-----------
0742062141 | a-not answer | 1
0742062141 | a-not answer | 2
0742062141 | c-answer | 3
0754231456 | a-not answer | 4
0754231456 | a-not answer | 5
When I use the following query it returns the distinct number but with the first code it finds:
select a.* from test_funnel as a
inner join
( select distinct tel_no,MIN(id_res) as id_res
from test_funnel
[code]....
View 3 Replies
View Related
Sep 21, 2007
Hi all,
I want to know how to coalesce distinct values as comma seperated into a variable which is used elsewhere. Here are my ddl and the query I tried.
My Expected result is
[Java],[MySQL],[.Net]
Code Snippet
CREATE TABLE #Tbl_Request
(
ID INT,
SkillCategoryID INT
)
GO
CREATE TABLE #Lkp_SkillCategory
(
ID INT,
Skill varchar(50)
)
GO
INSERT INTO #Tbl_Request VALUES(1,0)
INSERT INTO #Tbl_Request VALUES(2,1)
INSERT INTO #Tbl_Request VALUES(3,2)
INSERT INTO #Tbl_Request VALUES(4,0)
INSERT INTO #Tbl_Request VALUES(5,2)
INSERT INTO #Tbl_Request VALUES(6,2)
INSERT INTO #Tbl_Request VALUES(7,1)
GO
INSERT INTO #Lkp_SkillCategory VALUES(0,'Java')
INSERT INTO #Lkp_SkillCategory VALUES(1,'MySQL')
INSERT INTO #Lkp_SkillCategory VALUES(2,'.Net')
GO
DECLARE @listSkills nvarchar(max)
SELECT DISTINCT @listSkills= COALESCE(@listSkills+',','')+'['+ #Lkp_SkillCategory.Skill+']'
FROM #Tbl_Request INNER JOIN
#Lkp_SkillCategory ON #Tbl_Request.SkillCategoryID = #Lkp_SkillCategory.ID
SET @listSkills=(SELECT Skill = @listSkills)
SELECT @listSkills
DROP TABLE #Lkp_SkillCategory,#Tbl_Request
View 7 Replies
View Related
Sep 11, 2007
We have a query in which there are 20,000 rows and 90 distinct ID's
If we say
SELECT distinct siteid ,ts1, ts2, ts3, ts4, ts5, ts6, ts7, ts8
from #TEMPX
we get the 90 distinct values, but if we say
SELECT distinct siteid ,ts1, ts2, ts3, ts4, ts5, ts6, ts7, ts8, ts1avg, ts2avg, ts3avg, ts4avg, ts5avg, ts6avg, ts7avg, ts8avg from #TEMPX
TS1 contains 90 distinct values, whily ts1avg has 2,000 disitinct rows
Is there a way to get Distinct to work against only one column, i.e. SiteID ?
View 2 Replies
View Related
Aug 22, 2007
Hi,
How do I ensure that DISTINCT values of r.GPositionID are returned from the below??
Code Snippet
SELECT CommentImage AS ViewComment,r.GPositionID,GCustodian,GCustodianAccount,GAssetType
FROM @GResults r
LEFT OUTER JOIN
ReconComments cm
ON cm.GPositionID = r.GPositionID
WHERE r.GPositionID NOT IN (SELECT g.GPositionID FROM ReconGCrossReference g)
ORDER BY GCustodian, GCustodianAccount, GAssetType;
Thanks.
View 11 Replies
View Related
Apr 11, 2008
Hello,
I have three columns in my database named FirstName, LastName, StudentID. i want to insert only the distinct values and avoid the values which are already in the database. can anybody please help me with the logic? is there any possibility of checking for the redudant values in the stored procedure?
below is my code:protected void Page_Load(object sender, EventArgs e)
{Label1.Visible = false;GridView1.Visible = false;
}protected void Button1_Click(object sender, EventArgs e)
{
loaddata();TextBox1.Visible = false;
TextBox2.Visible = false;TextBox3.Visible = false;
Button1.Visible = false;Label1.Visible = true;
Label2.Visible = false;Label3.Visible = false;Label4.Visible = false;
loadGrid();GridView1.Visible = true;
}private void loaddata()
{string str = ConfigurationManager.ConnectionStrings["adventure"].ConnectionString;
SqlConnection conn = new SqlConnection(str);SqlCommand cmd = new SqlCommand("Sp_Student", conn);
conn.Open();cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text;cmd.Parameters.Add("@LastName", SqlDbType.VarChar).Value = TextBox2.Text;cmd.Parameters.Add("@StudentID", SqlDbType.Int).Value = TextBox3.Text;
cmd.ExecuteNonQuery();
conn.Close();
}
private void loadGrid()
{string strn = ConfigurationManager.ConnectionStrings["adventure"].ConnectionString;
SqlConnection connect = new SqlConnection(strn);string select = "select * from Student";
SqlCommand comm = new SqlCommand(select, connect);SqlDataAdapter da = new SqlDataAdapter(comm);
DataSet ds = new DataSet();da.Fill(ds, "Student");GridView1.DataSource = ds.Tables["Student"];
GridView1.DataBind();
}
Thanks
Sandeep
View 1 Replies
View Related
Aug 10, 1999
Hi,
Has anyone encountered this?
After applying SP 5a I found out that my SQL strings with sums and groups produced double rows. I found out that grouping one column (type CHAR(6)) produced two distinct rows of the equal values.
All the values in that column have 4 characters, but it seemed like some distinct values were grouped by the whole field length i.e 6 characters. I haven't seen earlier that those blanks after field value change the grouping results.
When I transferred the table and data to old SQL Server without any SPs, query showed distinct values correctly.
The sort order and other settings are the same. Can anyone tell where to look for help?
TIA, Al
View 1 Replies
View Related
Feb 24, 2015
SELECT first.name,first.country, second.name, second.string
FROM
first LEFT OUTER JOIN second
ON
first.name = second.name
WHERE
first.date='2015/02/24'
This query means all record from second table and matching record from first table. Now my question is that on 24 Feb 2015 I have duplicate names in second table and I want distinct names from second table and then its matching values from first table. Now my query is showing all duplicate values from second table and its matching record from first table.
View 5 Replies
View Related
Jul 6, 2006
Hello,
I have a table, which contains well over 30'000 rows. One of the Columns is for ransaction type, of which there are about 20-25 different types.
I am trying to pull a list of each type value, using a select distinct TSQL command...but thus far am unsuccessful.
Has anyone had a similar situation?? Am I wrong in using a Select Distinct?? Many thanks to all who reply!
View 3 Replies
View Related
Mar 17, 2008
Here is my dataset used by my report definition. The combo of barcode and order id is unique. The 'isDiscountedItem' field indicates if the customer used a coupon to purchased an item at a lower price.
departmentId classId barcode orderId isDiscountedItem
----------------------------------------------------------------------------------------------------------------------
1 1 123 1 True
2 7 456 1 False
1 1 123 2 False
1 1 123 3 True
1 1 789 3 True
2 7 456 3 False
... ... ... ... ...
I want to group my report by department id, class id and barcode. Then, I want to count all distinct order ids for which there was at leat one discounted item.
My report would produce the following output considering the above dataset:
Merchandise Number of customers who used a coupon
--------------------------------------------------------------------------------------------------------------
Department 1 2
Class 1 2
Barcode 123 2
Barcode 789 1
Department 2 0
Class 7 0
Barcode 456 0
I've been looking at a possible solution using hash tables defined in the report code but I would like to find a 'cleaner' solution. Any help would be appreciated.
View 3 Replies
View Related
Sep 21, 2015
I have the below query,
select
a.Assignment_UniqueID as DeploymentID,
a.AssignmentName as DeploymentName,
a.StartTime as Available,
a.EnforcementDeadline as Deadline,
sn.StateName as LastEnforcementState,-----Required Column
[Code] ....
o/p: is :
LastEnforcementState NumberOfComputers PComputers
Compliant 7056 91.54
Downloading update(s) 39 0.51
[code]....
I want to add these two rows information into single row,
Failed to Download Updates(s) 131(127+8) 1.66(1.65+0.1)
how to do this in my sql query?
View 12 Replies
View Related
Feb 3, 2015
I'm trying to create a WHERE statement that will calculate values from our current fiscal year to the last complete month.I'm using code that was created for us that does the calculations for our entire fiscal years. I thought I had fixed the WHERE statement to work like we wanted last year, but it appears to be broken now after trying it again in January and February. I'm guessing my WHERE statement only works for March and up, but how to get it to work for every month. Most attempts I'm trying it's just returning very large and inaccurate values.
I included my WHERE statement below of what I originally had that worked last year. The @BeginYear/Month/etc are retrieved from a different table and @Month is just set to MONTH(GETDATE())-1.
WHERE
(YEAR(SA3.DocumentDate)=@BeginYear AND MONTH(SA3.DocumentDate)>=@BeginMonth AND MONTH(SA3.DocumentDate)<=@Month)
OR
(YEAR(SA3.DocumentDate)=@EndYear AND MONTH(SA3.DocumentDate)<=@EndMonth AND MONTH(SA3.DocumentDate)>=@Month)
View 6 Replies
View Related
Aug 17, 2006
I need to somehow filter the results of my stored procedure to return the distinct "OrderNum" values. I'm using SQL database and I'm look for a way to alter the results from the stored procedure. My stored procedure rptOpenOrderLines currently returns all invoices (items under a OrderNum). I want to somehow filter those results to return one and only one of those "OrderNum" variables from the invoices. The tricky part is that I need to somehow find a way to do this without going into my database and directly altering the SQL stored procedure. I would be happy for any recommendations/ideas. Thanks!
View 3 Replies
View Related
Dec 6, 2013
Distinct name that match both subjects (math, science) from classname in level 2 only. Not sure where to even start. Example table below:
name subject level
bob math 2
hank math 1
joe science 2
bob science 2
joe math 2
ben science 2
carl science 1
View 2 Replies
View Related
Apr 5, 2006
I have a db that contains a column named DSCODES. Values in DSCODES are seperated by a comma.
If I run the following command.
select distinct(DSCODES) from DB
The following is returned.
S100,S102,S103
S100,S103,S105
What I would like returned is the following
S100
S102
S103
S105
Is this possible?
Thank you in advance
Graham
View 2 Replies
View Related
