How To Change The Transaction Log File Size To Less Than The Intial Setting.
Sep 4, 2006
I have H Drive with 12 GB size.
The Transaction log file of my Database is given in H drive.
i.e H:Krishna_log.LDF.
My database initial setting for the Krishna_log.LDF is 10 GB.
so currently I can see 10 gb file occupied in the H Drive.
very soon my database Krishna_log.LDF is going to increase 10%.
Even though If do Backup/Shrink, it will reduce to the initial to 10 GB.
So all I need is, change the initial size of the
Krishna_log.LDF from 10 GB to 5 GB.
Pls give your suggetions...(I dont mind to shutdown,Restart the Sql server do these changes to achive this Task).
Thanx in advance.
Regards,
Krishna
View 5 Replies
ADVERTISEMENT
Apr 17, 2002
How the size of transaction file is calculated. are there any standards.
I created my database with 2000 mb data filesize and 200 log file size.
now my datafile size has reach to 11000 mb but log file size is still 200.
Therefore when I take the online backup my logsize totally consumed and I have to cancel my backup.
Please reply ASAP.
regards
Sanjeev Lamba
View 1 Replies
View Related
Nov 29, 1999
I created a database and had its file size as automatic grow. Now the database file is of 17 MB and its transaction log file size is 230 MB. After checking transaction log file properties I came to that it is using 13 mb only and the rest of the 230 MB i.e 217 MB is free. I want that area in the transaction log to be freed and get the transaction file size to its actual size. Any help will be greatly appreciated.
Thank you in advance.
P.S: It is very urgent.
View 1 Replies
View Related
Jan 31, 2003
(Windows 2000 professional running SQL Server 2000)
How do you reduce the file size of the transaction log? Is it safe to delete the transaction log? I tried clicking on the ellipse (...) box in database properties, but even tho i'm the dba, it says i don't have permissions to do that! I see the "automatically grow transaction log" and "maximum file size for transaction log" dialogs, but our transaction log is already 5.5 GB, and we need for it to be WAY smaller! Is there a way to back it up, then start over with a new one or something?
View 3 Replies
View Related
Aug 21, 2006
Hi,
Database transaction log file has reached to 1 GB and (99% of this space is free). When try to reclaim the unused space, I have no luck. Initial size of the transaction log has now reaches 1GB. When trying to change the initial size to 5 MB, it does not work.
I have backup the transaction log with Truncate the transaction log but system is no releasing the space.
Please Guide.
Thanks
Shafiq
View 10 Replies
View Related
Dec 10, 2001
hi, i'm a newbie in SQL Server and have recently setup a test SQL 7 server. I used all the defaults at the beginning, and now the MDB file is about 500MB and the LDF file is of similar size.
i'm still trying to figure out how to reduce the size of the transaction log file. Currently I only have full backup of the database once a week, and there is no backup for transaction log.
as of this moment, the transaction log is of not much use to me, but I really want to get it reduced as i'm running out of disk space.
and i'd also greatly appreciate if someone could suggest a good DBA practice on the proper setup/handling of transaction logs (how to balance the disk-space usage AND be able to use the transacton logs for proper roll-over during a recovery process).
i'd soon be setting up a SQL 7 server where about 10 active users are expected at any one time. I've read that the transaction log file should be about 40% to 50% of the estimated size of the database file, and should be allowed "auto-grow". So what happens if the more space is required by the transaction logs? Does a full-backup purge the transaction logs (like the way they do in Exchange Server)?
Thanks!
View 2 Replies
View Related
Jul 19, 2002
Hi,
My transaction log file's physical size has exceeded 2GB. How can I reduce that?
Is there any way by which this file size can be controlled?
View 1 Replies
View Related
Oct 3, 2006
At this time I am only playing with the applications that generate the data and send it to the database. Without doing too much, and with deleting most data tables that were created, my transaction log file has grown over a gigabyte. I tried using the SQL server management studio (express) to shrink the database (tried shrinking files, too) but that did not make the file smaller. Right now there is hardly any data in the database (6 tables, a dozen columns and rows each) so it must be old transactions that are kept in the log. How do I get rid of the old data and make the file size smaller? Thanks.
Kamen
View 3 Replies
View Related
Apr 29, 2004
Hello, everyone:
I am not sure wether transaction log file size affect the database performance. My SQL 2K suddenly became slow yestoday. The data file is 3GB, and transaction log file is 11GB. Someone suggested I should shrink transaction log file. Can it work?
Thanks a lot.
ZYT
View 7 Replies
View Related
May 21, 2007
I have a client with 150MB database, the transaction log file isnearly 23GB. It's a PITA for me to backup his data and restore it onmy server as it takes about 30 minutes to restore as it re-creates a23GB file with no transactions in it :-As well as the space taken up by it, does it do any harm being thatsize? e.g. does it decrease performance?While it's there, considering the database is backed up daily, does itactually do any good?I know how to truncate and shrink logs, is it advisable / safe /worthwhile to do this on a regular basis?
View 4 Replies
View Related
Oct 23, 2015
I have a database I need to copy from a Prod server to a Dev server. There is not enough space on the Dev server. In looking at the size of the files on the Prod server, the Initial Size property for the transaction log on the Prod server is set to 100,000 MB though the log is using nowhere near that.
This is a mirrored database so the recovery model is "full". I know that to change the initial log size, I have to put the database in 'simple" recovery model. Is this possible? Can I just:
1. Pause the mirror
2. Switch recovery model to simple
3. Change the initial size property to something smaller.
4. Shrink the transaction log
5. Change the recovery model back to full and resume the mirror?
I honestly don't know if the transaction log is needed on the Dev server. Meaning I may just be able to restore the transaction log to a different location on the server and delete it so that new one is created.
View 2 Replies
View Related
Mar 8, 2000
HELP !!! I have a 1.2GB transaction log that I cannot reduce. I have tried SHRINKFILE, SHRINKDATABASE, restoring the file into a new data base, etc. The log file is only using 15MB and will not release the remainder to the OS
Any and all suggestions would be helpful
Thanks, Chad
View 1 Replies
View Related
Jan 3, 2008
I have a 14GB database whose data content is legacy and is described as static. The log file is significantly large and continues to change size mostly increasing by 2-5GB a day (~60GB now) I have observed over the past two days; it shrank once unexpectly by a few GB. The instance is hosting other databases such as: EnterpriseVaultDirectory, EnterpriseVaultMonitoring, EnterpriseVaultStore, and NetPerfMon - might these seemingly unrelated data sources be involved?
I am trying to a trace to find traffic against the tables, no such luck.
Web applications are playing against it for queries but there should be no UPDATEs beign applied. I can only suspect that other unknown applications are performing operations but have yet to find unexplained connections.
Are there any other reasons why this type of log file activity would happen merely due to queries or stored procedure calls?
Lets also state, "mirroring, indexing, replication" are not at play. I know logging "Full" is not necessary as "Simple" should suffice but I am still hunting down why UPDATEs might be getting through. I realize I might adjust the migrated SQL 2000 security model to deny updates to find what breaks but would rather not take that iniative yet.
The installation is a fresh SQL 2005 Standard setup with SP2 applied; the databases were upgraded.
View 6 Replies
View Related
Sep 4, 2007
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
View 1 Replies
View Related
Dec 29, 2003
I am trying to concatenate three fields into one in a View. I have the following data:
Last Name
First Name
Middle Initial (can be null)
I need my resultant field data to look like the following:
"Doe, John P."
I'm having a problem writing SQL that is sensitive to placing the period after the middle initial only if there is a middle initial present. If there isn't a middle initial, I just want the following: "Doe, John".
I have tried the following CASE statement:
CASE WHEN middleInitial IS NOT NULL THEN ' ' + middleInitial + '.' ELSE '' END
However, I get an error indicating that the CASE statement is not supported in the Query Designer.
How can I resolve this problem in a View? Is there a function similar to ISNULL(middleInitial, '') that would allow for the "."?
View 4 Replies
View Related
Jan 17, 2008
Hi Folks,
I've recently implemented a CLR stored procedure on a couple of databases but i've noticed the first time i use the stored proc in a given database i get a delay of around 10-15 seconds. Subsequent calls in new connection sessions execute immediately. I'm assuming the delay is due to the loading of the CLR and the assemblies needed. The assembly being loading by the CLR is not signed. Has anyone else seen this or know a way round this as it is impacting the user experience of our application.
Many thanks for any help you can provide in advance
Simon
View 12 Replies
View Related
Apr 15, 2008
I have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
Any ideas?
Stacy
View 8 Replies
View Related
May 30, 2006
Hi,
I have been trying to configure the Paper Size to be default "A4" instead of "Letter".
My Report is configured to 21cm x 29,7cm and margins 1,5cm.
The Body is configured to 18cm x 26,7cm.
Everything looks fine in the Preview but the Size is always "Letter". The printers are all configured for A4 printing.
Is there a way to set these default values in the Page Setup Toolbar or is it supposed to figure it out?
Thanks,
steinar
View 4 Replies
View Related
Apr 29, 2008
How to you create a database and set it size usings code?
I know CREATE DATABASE SUPPLIES but how do I set it to a max of 100 mb with no autogrowth using code?
View 7 Replies
View Related
Jun 15, 2006
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
View 11 Replies
View Related
Jul 8, 2015
give me the best autogrowth & initial size setting for database
View 7 Replies
View Related
Oct 24, 2006
How to change SQL Server setting so that it allows remote control?
View 4 Replies
View Related
Jul 25, 2007
I have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies
View Related
Feb 13, 2004
I have installed WebMatrix and MSDE and have been able to successfully make a connection from WebMatrix to MSDE. I am used to using SQL Server with Enterprise Manager but I do not have that available to me right now so I'm using MSDE instead. I followed the setup instructions on the WebMatrix tutorial and setup MSDE with an SA password. I would now like to change the password to something else. Is there a command that I can use to do that? There is no Enterprise Manager so I'm kind of stumped. Thanks in advance for your help.
Kathleen
View 3 Replies
View Related
Aug 25, 2004
Hi,
We currently have a fairly new SQL server 2000 db (currently about 18mb is size) as a backend to an application (Navision). Performance seems to be below what it should be.
The db is increasing quite rapidly in size, with a lot of data scheduled to be loaded onto the db and also more and more shops and users coming onto the system with alot more transactions going onto the db.
The initial setup of the db has the database File properties set to "Automatically grow file" by "30%" and has an unrestricted file growth.
The server that the db sits on is high spec and very large disk space.
Because the database will be expanding alot and thus reaching its maximum space allocation and then performing a 30% increase in size (which I guess affects performance quite a bit??) quite regularly.
Is it best to set the intitial size of the db to a alot bigger size in the first place as we have large disk space availiable and also set the % increase bigger also.
any advice on best performance would be much appreicated.
Regards,
David
View 1 Replies
View Related
Apr 23, 2006
is there any way I can setup the default transactional level at the Database level instead.
Such as I don't want to write the transaction isolation level at every SQL statement.
View 2 Replies
View Related
May 6, 2015
By setting the TRANSACTION ISOLATION LEVEL READ UNCOMMITTED; is this automatically sets all the joined tables to NOLOCK?
Or, in order this statement to work right, this needs to be only done inside BEGIN TRAN > COMMIT (ROLLBACK) statement?
View 7 Replies
View Related
May 2, 2006
Hi there!
My provider does not yet support SQL Server 2005, they are still on SQL Server 2000. I put together a very basic login page, but it is crashing everytime I access it because of this problem, and sadly I am not advanced enough as yet to know how to remedy it! Can you help?
Here is the error page, some of it; - Any ideas gratefully received!
Russ.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
View 1 Replies
View Related
Aug 21, 2007
Hi,
I currently have a 2000 Ent. production server and a stand by server ready for transaction log shipping.
Is it possible to setup transaction log shipping on a live environment without any interruptions?
I'm currently backing up the log every 1 hour, I'd like to increase to 15 minutes.
Any help would greatly be appreciated.
Thanks,
- Gary
View 4 Replies
View Related
Jul 23, 2005
Hello,I have been trying to figure out how to temporarily change the maxfilegroup size of a SQL 2000 database I "inherited" when our DBA quit.I just need some breathing room until I can figure out how to properlyarchive and remove some filegroups.Here is the scenario, my filegroup is set to 20. Each filegroup is setto grow to 4096.I currently have all 20 filegroups in use and filegroup number 20 ismore than 1/2 full.I have considered making the max size for each filegroup larger butbelieve this is treating the symptom not fixing the problem.I would RTFM if I knew how to ask the question in 5 words or less.I have plenty of room to grow in terms of disk space.In Query Analyzer I suspect I have to use an ALTER DATABASEIn Gui mode I suspect I have to right click on the database properties,filegoups,,,,In the past I have setup my databases with 1 filegroup and autoconfigured to grow as needed so this is new territory for me so pleasefeel free to dumb it down for a noob as I need baby steps.
View 2 Replies
View Related
Jul 1, 2006
Hi
I am using one Publisher with many subscribers for Merge replication of a database.
I wanted to change size one column in a table. So I added a dummy column (through Filter column).
Copied data, dropped old column (through Filter column), added new column, copied data, and dropped dummy column.
On subscriber A, replication is OK. On subscriber B, I get the following message.
--------------------
Initializing
Connecting to Publisher 'REPLIC'
Retrieving publication information
Retrieving subscription information
A column was added to or dropped from the replicated table.
The schema script 'exec sp_repladdcolumn '[dbo].[Items]','C1',[NVARCHAR(1000) NULL], '%', 1' could not be propagated to the subscriber.
The schema script 'exec sp_repladdcolumn '[dbo].[Items]','C1',[NVARCHAR(1000) NULL], '%', 1' could not be propagated to the subscriber.
A column was added to or dropped from the replicated table.
--------------------
I made a new snapshot, reintialized subscription with upload, and tried to sychronize again.
But same message.
Question 1. Is there anyway to make replication?
Question 2. If not, can I at least upload data changes before dropping and making new publication?
Imtaar
View 1 Replies
View Related
May 13, 2007
Hi,
I use pIDBPromptInitialize interface for establish a connection to MS SQL Server 2005.
SQL Server has €śus_english€? (LCID=1033) language as default setting.
I use the following part of code to charge LCID (from 1033 to 1049):
CDBPropSet ps3;
ps3.SetGUID(DBPROPSET_DBINIT );
ps3.AddProperty(DBPROP_INIT_LCID, (long)1049);
hr= pIDBProperties->SetProperties(1, &ps3);
hr= pIDBPromptInitialize->PromptDataSource(NULL, GetActiveWindow(),
DBPROMPTOPTIONS_PROPERTYSHEET,
0, NULL, (LPOLESTR)szFilter,
IID_IDBProperties, (IUnknown **)(&pIDBProperties));
...
hr = FDS->Connection->m_spInit->Initialize();
Then I connect to SQL Server successfully.
But SQL Server has LCID=1033 anyway!! Way I didn€™t change it by my code? What is wrong?
But later I try to use some feature of LCID=1049 (date conversation)
How can I change €śLanguage€? setting to, for example, Russian (LCID=1049) using pIDBPromptInitialize
G.
View 7 Replies
View Related
Apr 5, 2001
Hello!
We have unusual situation. We increased the size of transaction log up to 100MB.
After we run the transaction log backup the physical size of transaction log file getting smaller and smaller from 100 to 88 and then to 76 and so on.
Do you now the reason?
Thank you,
Natalia
View 4 Replies
View Related
