I installed SQL Server 2005 Enterprise, then SP1 and then SP2, Maintenance Plan worked. But if I installed SQL Server 2005 Enterprise and then SP2 directly (skipping SP1), the Check Database Integrity in Maintenance Plan was not working. The error message is as follows:
Executed as user: DomainSqlServiceAccount. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:56:21 AM Could not load package "Maintenance PlansTest Plan" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login failed for user ''. The user is not associated with a trusted SQL Server connection.). The SQL statement that was issued has failed. Source: Started: 10:56:21 AM Finished: 10:56:21 AM Elapsed: 0.047 seconds. The package could not be loaded. The step failed.
Other tasks like Rebuild Index seem to be fine. SP2 is supposed to be inclusive. Does anyone have any ideas on why this is happening.
I've been running the Ola Hallengren maintenance script for the last five months without missing a beat. Today I find an error stating the UserDatabase Integrity check job failed last night. This is running on SQL Server 2014 BI edition w/64 Gigs.
I ran a DBCC CHECKDB on each database manually and all worked until I tried it on the biggest one that is about 18 gbs. It just keeps running and I eventually stopped it so I'm guessing it is memory, but doesn't make sense considering it has 64 gbs. I have it set to 64/4 max / min. Again, this was never an issue until last night.I've been looking up all morning, but not seeing much on this error "The operating system returned error 1453"?
I developed a console application that will continually check a messagequeue to watch for any incoming data that needs to be inserted into MSSQL database.What would be a low-cost method I could use inside this consoleapplication to make sure the MS SQL database is operational before Iperform the insert?
Hi,What methods can we use to check the integrity problems? Some records in mydatabase are having Foreign Keys but the database doesn't have any relatedrecords with required Primary Keys. I need to scan the whole database anddelete (maybe with backup, maybe not) all wrong records.Who can I do that? Is it need to write my own application to do that or wehave some standard way to fix these problems? I'm not a databaseadministrator and don't know these ways (yet). Can somebody help me withadvice?Thanks.Dmitri Shvetsov
I have a database in the 3rd normalized form. There is a need to load rows into a child table. To avoid having to drop RI, an ALTER TABLE WITH NOCHECK is being used. I am looking for a way to verify the integrity after the load is complete. After the load an ALTER TABLE WITH CHECK will be executed. Can I used DBCC to verify, that no orphaned child rows were loaded? If so, which parms would I have to use with DBCC?
im trying to set up maintenance plan for the check database integrity...
In sql 2000 you get a nice little log in SQL Logs DBCC CHECKDB (WSS_Search_db3) executed by xxx found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
But in SQL 2005 Im not getting a nice log of this but getting it against some system database and not the database i selected
Date1/22/2008 5:19:43 PM LogSQL Server (Current - 1/22/2008 5:19:00 PM) Sourcespid84 Message DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by XXX found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
Anyone got this to work? Trying to get the same message i got for SQL 2000 or at least so i can confirm it ran.
Currently having some issues with my laptop. I'm no computer expert / programmer so please bear with me.
It is a Vista Home Premium based machine that was purchased about 6 months ago. I'm having issues with an application that relies on WDAC to work. The application worked perfectly in the past and I just recently tried to use it again and it doesn't get past the "Loading Application" screen.
From the company website, they make it clear that anyone using the software has to make sure to run the Windows update to bring the DOT NET framework and MDAC to their latest revisions.
Now, I know that MDAC has been replaced by WDAC to run under Vista. However, I learned that only after trying, for a completely different reason, to install MDAC 2.8 SP1 (I know, dumb idea).
All this to end up saying I'm pretty sure something was screwed up in my WDAC when I tried installing MDAC. I would like to know if there is any way to verify the WDAC installation integrity, basically a Microsoft Component Checker equivalent under Vista.
I set up a test database to try and understand table partitioning. Since deleting the partition schemas, functions and all relevant info on the database properties page, I am getting the following errors during the weekly database integrity check:
Msg 8914, Level 16, State 1, Line 1 Incorrect PFS free space information for page (1:223) in object ID 60, index ID 1, partition ID 281474980642816, alloc unit ID 71776119065149440 (type LOB data). Expected value 0_PCT_FULL, actual value 100_PCT_FULL.
I have no way to test this. If let's say the database has logical integrity errors, will it throw back an error to the Check database integrity object such that, the error arrow (the red line which is the error handler stuff) will be triggered for notification purposes?
what does check database integrity in maintenance plan do.
i heard that the transactional log growth in sql server should be fixed to maximum available disk space and must be monitore the threshold through maintenance plan.how can it be done. please advice me through maintance plan instead of shrinking the log as it is unnecessary IO to the disk.
How often is the check database integrity scheduled. is it daily or weekly.
I have a database hosted that doesnt passes the integrity test. Here is the error it gives : Executing the query "USE [db_cs] failed with the following error: "Could not locate entry in sysdatabases for database 'db_cs'. No entry found with that name. Make sure that the name is entered correctly.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any idea whats wrong and how I can let the integrity test pass for this db.
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042. I have a common maintenance plan that runs on each of the servers. The maintenance plan runs fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection Databases: <list of databases> Include indexes Task start: 2008-02-21T00:05:42. Task end: 2008-02-21T00:05:46. Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time. If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Is there a way to test the integrity of a record which is about to be inserted in a database before doing so? The goal is to prevent all kinds of runtime errors that will occur after the insertion, if the record breaks any of the database rules. The solution should apply to a VBScript used inside a DTS package.
I found the following error in my maintenance plan please help me on this
Under maintenace plan history i found this error:-
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
and jobs failed with following error
i found this error in job history of optimization & integrity check jobs:-
Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :
Alter failed for Server 'LUMONT001'.
Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue? Thanks, Paul
I searched the forum on this topic and saw the following explanation on Check Database Integrity Task, by DarrenSQLIS.
"The Check Database integrity task will fail if the DB has a problem. The task fails; the details are raised in the error event and dumped to the log etc. You can use on Failure precedence constraints or an OnError event handler to capture that failure and do something if you wish."
Here is the link to the quote above. http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2290253&SiteID=1
I would like to continue this discussion on this new thread to help my understanding.
I understand that this command does dbcc checkdb( ) command on a specified server for the databases you want to check. And if a database has a problem the task will fail and raise an OnError event. DarrenSQLIS goes on to say that the error is dumped to a log. What log is this? Where do I specifiy the location of this log?
As per the advice given by somebody i set ldf initial log size as 29 gb and restricted the growth and set the autogrowth to 500 mb i did not run and shrink ldf command on daily basis. this is the advice given by another dba.
then he suggested to create a maintenance plan to check database integrity check. whick will check the disk space threshold.
i did not understand how will the maintenance plan check the disk space and give an alert. where should i check the alert for this maintenance plan. secondly how can i stop my database log file to deliver a message that my disk is full.
please suggest me a best method. where i am wrong , how should i handle the situation without the dba monitoring. and our system has lot of batches running for every minute.
Ever since upgrading SQL Server 2005 to SP2 build 3050 all my maintenance plans which begin with a Check Database Integrity Task are failing! If I remove the task from the plan they all execute properly. If I run the T-SQL equivalent manually it executes properly.
I upgraded the server to build 3054 and rebooted several times and Im still having no luck. What am I doing wrong? Thanks for your help with this. -Kenny
I met a very strange problem recently. I set up a database integrity check maintenance plan. But this job failed every time. I looked into the logs, the error message was that Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. I used the sp_helpdb to check the version of the databases included in my maintenance plan. The sp result shows that all the databases are above version 80....
Even more strange, i can successfully run the dbcc check query on each database.
Any comment and suggestion will be very appreciated.
I have built a package that firstly shrinks a database and then backs it up which is scheduled to run each day, but I would like to add a check (Check Database Integrity) in as the first task and if the Database checks out ok then continue on, if not send an email.
Now, I am unsure if the Check Database Integrity Task in SSIS actually returns the success or failure message back to the package that I am after. The SQL behind the task includes the NO_INFOMSGS option.
Can anyone advise if it is possible to have the status/integrity of the database returned to the SSIS task and to proceed based on the result?
Hello all, I am having problems running a stored proc from an aspx.cs file. Basically I want to extract data from webForm controls and create a new record in a DB table. I have watched the "Getting Started" videos on thi site, and the only difference between my code and the code of the demonstrator is the connection string. My conn string:- dataSrc.ConnectionString = ConfigurationManager.ConnectionStrings["ProjectTblConnString"].ConnectionString;Demonstrator conn string:- dataSrc.ConnectionString = ConfigurationManager.ConnectionStrings("ProjectTblConnString");When I debug with the string as shown by the demonstrator the error list reports that ConnectionStrings is a property and I am trying to use it as a mothod, which is fair enough, but I am just confused as how it worked for the demonstrator and not myself. When I debug with the code I used above I get no error, but nothing is inserted in the DB.Also, it looks as if the only class in my aspx.cs file that is actually being executed is PageLoad() - the remainder of the code seems to be ignored. Below is the entired aspx.cs file:- 1 using System; 2 using System.Data; 3 using System.Configuration; 4 using System.Collections; 5 using System.Web; 6 using System.Web.Security; 7 using System.Web.UI; 8 using System.Web.UI.WebControls; 9 using System.Web.UI.WebControls.WebParts; 10 using System.Web.UI.HtmlControls; 11 12 public partial class CreateProject : System.Web.UI.Page 13 { 14 protected void Page_Load(object sender, EventArgs e) 15 { 16 17 if (User.Identity.IsAuthenticated == false) 18 { 19 Server.Transfer("Default.aspx"); 20 } 21 22 if (chkbox_startDate.Checked == true) 23 { 24 txtbox_startDate.ReadOnly = true; 25 txtbox_startDate.Text = (System.DateTime.Now.ToString()); 26 } 27 28 } 29 30 protected void btn_create_Click(object sender, EventArgs e) 31 { 32 //connection string for connecting to SQL Server DB 33 SqlDataSource dataSrc = new SqlDataSource(); 34 dataSrc.ConnectionString = ConfigurationManager.ConnectionStrings["ProjectTblConnString"].ConnectionString; 35 36 37 //insert data in table using the CreateNewProject stored proc in the DB 38 dataSrc.InsertCommandType = SqlDataSourceCommandType.StoredProcedure; 39 dataSrc.InsertCommand = "CreateNewProject"; 40 dataSrc.InsertParameters.Add("Project_Title", txtbox_title.ToString() ); 41 dataSrc.InsertParameters.Add("Description", txtbox_desc.ToString() ); 42 dataSrc.InsertParameters.Add("Start_Date", txtbox_startDate.ToString() ); 43 dataSrc.InsertParameters.Add("Primary_Dev_Lang", list_devLang.ToString() ); 44 dataSrc.InsertParameters.Add("Dev_Environment", list_devEnv.ToString() ); 45 dataSrc.InsertParameters.Add("No_Junior_Devs", txtbox_juniorDevs.ToString() ); 46 dataSrc.InsertParameters.Add("No_Senior_Devs", txtbox_seniorDevs.ToString() ); 47 48 int rowsAffected = 0; 49 try 50 { 51 rowsAffected = dataSrc.Insert(); 52 } 53 catch (Exception ex) 54 { 55 Server.Transfer(Error.aspx); 56 } 57 finally 58 { 59 dataSrc = null; 60 } 61 62 if (rowsAffected != 1) 63 { 64 label_confirm.Text = "Error, Contact system admin"; 65 } 66 else 67 { 68 label_confirm.Text = "Success"; 69 } 70 71 }//end btn_create 72 73 //if cancel is clicked set all values back to default 74 protected void btn_cancel_Click(object sender, EventArgs e) 75 { 76 txtbox_title.Text = ""; 77 txtbox_desc.Text = ""; 78 txtbox_startDate.Text = ""; 79 txtbox_seniorDevs.Text = ""; 80 txtbox_juniorDevs.Text = ""; 81 list_devEnv.SelectedIndex = 0; 82 list_devLang.SelectedIndex = 0; 83 chkbox_startDate.Checked = true; 84 label_confirm.Text = ""; 85 } 86 87 //if checked the current dateTime is inserted into txtbox 88 protected void chkbox_startDate_CheckedChanged(object sender, EventArgs e) 89 { 90 if (chkbox_startDate.Checked == true) 91 { 92 txtbox_startDate.ReadOnly = true; 93 txtbox_startDate.Text = (System.DateTime.Now.ToString()); 94 } 95 else 96 { 97 txtbox_startDate.ReadOnly = false; 98 txtbox_startDate.Text = ""; 99 } 100 }//end chkox 101 102 103 }//end class
Any help anyome can give is greatly appreciated. This is part of my Final Year College Dissertation which is due in 3wks !!!! Sláinte á chaire, Seán
Hello, I am new to this sql server reporting server technology. I have a requirement like the table header should repeat in all pages of the exported excel's print preview. So I have created the header columns with fixed lenths as same as table's header in the page header of the report. Then only the Header will repeat in all pages of the print preview.
But the problem is when doing like this, many of the columns have been merged together. The report layout is ok. But cant sort the data. It says a message "This operation requires the merged cells to be identically sized."
In some forms i have found the header control's edges need to be sized identically with the tables' columns edges. I did it. But still the columns are merged when exporting.
I am thinking about moving some backups from the local machine to a remote server. Right now, I am using Ola Hallengren script for backups. The script performs checksum on the backup while it's being written on the disk. I am going to move the files using Robocopy utility. How do I check the data integrity once the backups are transferred to the remote server?
I'm moving data between identical tables and have to use a flat file as an intermediary. I thought: "No problem, SSIS can do a quick export to a file, then move the file to another server, then use SSIS to import the data to the new server."
Seems simple, right?
I'm hitting all sorts of surprising data conversion errors. I used the export wizard to create the export package. This works fine. However using the same flat file definition, the import package fails -- even when I have no destination. That is I have just one data flow task that contains only one control: the Flat File source. When I run the package the flat file definition fails with data type conversion and truncation errors. One of the obvious errors is for boolean types. The SQL field is a bit, SSIS defined the column as DT_BOOL, the output of the data are literal text values "TRUE" and "FALSE". So SSIS converts a sql datatype of bit to "TRUE" and "FALSE" on export, but can't make the reverse conversion on import?
Does anyone else find this surprising? I would expect that what SSIS exports, it can import given all the same table and flat file definitions. Is SSIS the wrong tool to do such simple bulk copies? I'd like to avoid using BCP because this process will need to run automatically within SQL Agent so we can leverage all the error tracking and system monitoring.
I am new to ASP.NET. At present i am developing a web application in which i need to insert data in database(MS SQL 2005) from a form which uses only HTML controls. I need to use HTML controls so posting of form to the server is not done and hence i need to generate HTML controls using javascript. So the data in the form must be stored in the database. How this data can be inserted in the database is the problem and i think that javascript might be the solution for it.
I have Two table.One is MainTable and other is Temporary table.Both have Same Field Before entering data into main table I want to check weather these data's are already there or not. Here i am checking only three column of temporary table to the MainTable.
I am using sqlconnection to connect sqlserver 2005, Before connect the server i want check the server is exists or not, if server is not exist give a prompt to user enter the actual server name, If there is any way to check whether server exists or not pls