How To Clear 'ODBC 24000 Invalid Cursor State'
Jul 6, 2006
Hello experts. Excuse my SQL newbie status. I was writing a stored procedure to crunch some data against an MS SQL 2000 database. I didn't entirely know what I was doing so I was using Crystal Reports 11 as an "application layer" pulling against a stored procedure. Well I guess ODBC connections don't support temp table output from stored procedures, or at least I don't know how to do it.
So I've rewritten my stored procedure so it inputs and outputs data using BCP, rather than just sending a simple select query.
My problem is that I cannot get CR to add the stored procedure back in to the report. Everytime I try I get an 'ODBC 24000 error - Invalid Cursor State.'
Where is this current set of records? How do I find it and close it? I've recreated my ODBC connection, every related table and SP to no avail. This is my crusial question.
Less crucial but helpful: How do I write an SP so it can be called from a report program like CR and will return its result set to the application? What's a good, simple "application layer" I can use if I'm doing all the logic in native SQL stored procedures? ASP.NET looks like a pain in the ass, and SQL Reporting Services requires Visual Studio .NET 2003. Is Perl my answer, since I can build web interfaces and forms in my sleep?
View 1 Replies
ADVERTISEMENT
May 1, 2006
I have written a routine to search a unique record using prepared statement. Its my first sql coding with c++.
I am not using / importing any dlls.
I connect+allocs handels , then use SQLPrepare(StmtHandle, SQLStmt,SQL_NTS); to generate a guery.
I have written bind parameters and sqlexecute +sqlFetch in a loop and loop gets executed till ESC key is pressed.
First time when I bind paramaters using SQLBindParameter it works perfect.
When loop gets executed secondtime onwards, it gives an error.
SQLState: 24000 [ODBC Client Interface]Invalid cursor state.
If I open connection, handles, and prepared starement in same loop, THEN it gives correct record without 24000 error.
I want the advantage of prepared staement. So I do not want to close and open connection and prepare statement every time.
Have I missed any step?
Where & when I should code the cursor type? Any specific libraries I need to link?
Thanks
View 2 Replies
View Related
Feb 11, 2000
Does anyone know what this means ??
thanks
View 1 Replies
View Related
Feb 23, 2004
When I change the Identity in a table in EM (undependend on which DB and table) the result is: invalid cursor state.
I have a productive server running SQL Standard version and an play area running SQL Personal.
The funny thing is, when I run the update over QA it works without a problem.
With EM the Profiler tells me an error 16954 after droping a table, and it start to roll back.
I tried hunderts of things to make it work but with no success. Except one thing. I've reinstalled the Personal SQL, restored my DB's and everything works fine now.
This happened first after installing the latest security update from Microsoft on the 10th of February.
I don't want necessarily to reeinstall the SQL server on the productive server, because there are hundreds of Databases on it, and a lot of security settings.
Any help is very appreciated.
View 2 Replies
View Related
Feb 25, 2005
Hi,
I have a stored procedure that calls 2 other stored procedures and combines the results into a temporary table. The results of the temporary table is then returned from the stored procedure.
When I execute the stored procedure in Query Analyzer, I get the exact data I want in the correct format - no errors.
When I execute that stored procedure in Omnivex SQL Link 3, I get an "Invalid Cursor State" error.
I did some digging on that error, and found that it could be related to print statements within the stored procedures. I removed all print statements from all 3 stored procedures and the error is still occuring.
Any suggestions?
View 5 Replies
View Related
Jul 20, 2005
I know other people have posted stuff like this before, but I am stillto see a definitive answer. I have created a table in Enterprisemanager called tblUsers. I later added a column in EM and saved thechange. I then noticed I had misnamed the column, so I renamed andwhen I tried to save the change I got the following message:-'tblUsers' table- Unable to rename column from 'fldepCode' to 'fldRepCode'.ODBC error: [Microsoft][ODBC SQL Server Driver]Invalid cursor stateThis is now regularly happening to me, and I am tired of having torecreate tables.I am using SQL Server 2000 with all the latest service packs andpatches. Has anyone any idea what is causing this and how I can cureit or avoid it?
View 2 Replies
View Related
Jul 3, 2007
When I try to modify a table that I just created I get the following error message: - Unable to modify table ODBC error:[Mircrosoft][ODBC SQL Server Driver] Invalid cursor state.
SP3 has been applied to SQL Server 2000.
Can anyone help explain what is causing this error? There is sufficient space for the database and transaction log.
View 2 Replies
View Related
Aug 13, 2004
These errors occur at the subscriber. First, "The merge process could
not query the last sent and received generations" is generated, then
immediately afterwards, "invalid cursor state" is generated. We are
trying to pull a new subscription snapshot from the republisher. The
subscriber has been added and removed from the replusher's pull
subscriptions a number of times for testing. Now, we cannot get the
subscriber to re-sync with the republisher.
Any ideas?
View 1 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Nov 16, 2006
hi
I have a float column . only in cursor I get a type missmatch.
does any one knows it ?
the error
Msg 8114, Level 16, State 5, Line 14
Error converting data type varchar to float.
the code
DECLARE @RON_FLOAT FLOAT
DECLARE RON_CURSOR CURSOR FOR
SELECT RON_FLOAT
FROM RON_TABLE1
OPEN RON_CURSOR
FETCH NEXT FROM RON_CURSOR
INTO @RON_FLOAT
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT 'VALUE IS ' + @RON_FLOAT
FETCH NEXT FROM RON_CURSOR
INTO @RON_FLOAT
END
CLOSE RON_CURSOR
DEALLOCATE RON_CURSOR
the code for the table
CREATE TABLE [dbo].[RON_TABLE1](
[RON_FLOAT] [float] NULL,
[RON_CHAR] [nchar](10) COLLATE Hebrew_BIN NULL
)
View 1 Replies
View Related
Oct 14, 2007
One of the people I have to support gets an error message when they are trying to use a SQL based application that was developed in house:
an error occured..microsoft odbc sql driver cursor type change. location frn main, load user () source is odbc
Unfortunately, the developer is not available to troubleshoot the issue and I do not understand it. I thought ODBC settings were static, so how could they cause a cursor to change?
View 1 Replies
View Related
Feb 27, 2002
We recently upgraded a SQL 7.0 SP2 database to SQL 2000 SP2. The web server that connects to both databases (we have 2 up that we can switch back and forth) is Win2K with the SQL Server ODBC driver of 2000.80.194.00 (I'm thinking this came w/ W2K) But I think I installed the 7.0 client connectivity on the web server.
I have a few questions:
1. Any reason why this would happen with the SQL upgrade?
2. What is the ideal situation for client/server ODBC drivers / MDAC client.. If I have a SQL 2000 SP2 server do I install SQL 2000 client on the web server and also the service pack on the web server?
Thanks and please ask if you need more info..
-Kelly
View 1 Replies
View Related
Jan 15, 2004
Im receiving 'HY000 Connection is busy with results for another hstmt' when trying to insert. The reason is down to another hstmt with a cursor still open (as not all results have been fetched) against the same connection handle. My current design is one connect handle per file, with multiple statement handle depending on sql issued so i dont need to rebind.
I'm guessing, but is there a sqlsetconnectattr/sqlsetstmtattr setting to which will allow me to insert/update/delete to a file with a open cursor that may include the result ???
sqlserver version 8
View 4 Replies
View Related
Feb 20, 2007
I am trying to set up a ODBC connection to a remote database using the ODBC data source administrator. I am getting an error message complaining of an invalid instance(). The database I am trying to connect to does have a default instance and a named instance. Do I need to specify the instance name somewhere in the connection settings? I tried specifying the server name as <Remote computer IP Address>/<Instance Name> but this didn't work. Any ideas?
View 4 Replies
View Related
Jul 23, 2005
Hello All,I am getting the following error when attemping to open a table inSQL2kSP3a.________________________________________SQL Server Enterprise ManagerDatabase Server: Microsoft SQL ServerVersion: 08.00.0760Runtime Error: [Microsoft][ODBC SQL Server Driver]Invalid time format_________________________________________I cannot find it in sysmessages, or on the web.Any ideas about how to resolve this? And how it occured...Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Mar 23, 2007
I'm trying to connect to a tab-delimited text file using the ODBC data access. I set it up using Administrative Tools - Data Sources (ODBC) from the start menu, and clicked the 'Guess' button under Define Format.
The schema it created looks like this:
[cims_output_data.txt]
ColNameHeader=True
Format=TabDelimited
MaxScanRows=0
CharacterSet=OEM
Col1=SIMNAME
Col2=TIMESTAMP
Col3=SIMTYPE
Col4=REGION
Col5=SECTOR
....etc.
It looks OK, but if I go back to Define in Administrative Tools and try to review it, I get a similar error message:
Ini File (or Registry) C:Program FilesCIMSschema.ini is corrupt.
Section: cims_output_data.txt, Key: Col1.
Has anyone seen this before? There is nothing on MSDN as far as I could find. I read on another forum that if you replace the label 'Col1' with 'Col' the problem is solved but it still reports that the schema is corrupt when I try to open it in Administrative Tools.
Bill.
View 5 Replies
View Related
Jun 6, 2007
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
View 6 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Jul 23, 2005
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies
View Related
Apr 21, 2008
Hello,
I've got the following query:
SELECT zA."ID" AS fA_A
, zA."TEXT" AS fA_B
, (
SELECT COUNT(zC."ID")
FROM Test."Booking" AS zC
) AS fA_E
FROM Test."Stack" AS zA
WHERE zA."ID" = ?
With this query I call:
- SQLPrepare -> SQL_SUCCESS=0
- SQLNumParams -> SQL_SUCCESS=0, pcpar = 1
- SQLDescribeParam( 1 ) -> SQL_ERROR=-1, [Microsoft][ODBC SQL Server Driver]Invalid parameter number", "[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index"
Is there a problem with this calling sequence or this query? Or is this a problem of SQL Server?
Regards
Markus
View 7 Replies
View Related
Aug 3, 2006
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
View 1 Replies
View Related
Sep 26, 2007
We have mirroring setup for 5 dbs, 4 of which are synchronized and 1 which is in "synchronizing" state on the principal and "restoring" state on the mirror. Mirroring for all dbs has been working fine for the past several months and we have a witness that has allowed automatic failover in the past without problems.
This database has several bulk inserts performed throughout the day and am sure there is some latency due to the size of these transactions.
Not sure as to why this is happening all of a sudden, but the db in question has been in this state for the past 12 hrs. I checked the mirroring status on the principal and it states that it is "synchronizing: data is being transferred from principal to mirror", but the mirror server states that db is in "restoring" state. Can anyone suggest as to how I can get the database on the mirroring server to get back to "mirror, synchronizing/restoring..." state? Or suggest on how I can troubleshoot this?
Thanks in advance.
View 3 Replies
View Related
Aug 12, 2015
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
View 3 Replies
View Related
Jul 20, 2005
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies
View Related
Sep 20, 2007
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
View 7 Replies
View Related
Jul 23, 2005
hi thank you for this solution Hugo (dutch?) and it's very handy, thankyou but my issue is that we created dozens of views with my function.This functions returns an integer of a date. This function has to give alowerlimit and higherlimit back when dates are out of Calendar range.But i want to read this from the Calendartable ONCE and store it in aglobal variable somewhere in SQL Server. I DON'T want to referencetables in my function. SO read once the lower- and upperlimit and usethis variable/property for referencing in my function!!GreetzHennie*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 11 Replies
View Related
Jul 10, 2006
Is there a way to clear all the records in a table in Microsoft SQL
Server Management Studio instead of selecting all the rows and delete?
View 12 Replies
View Related
Sep 20, 2002
I'm trying to clear a database transaction log that has gotten much too large. I backed it up hoping that this would clear the "active" log, but now I just have two copies of a huge transaction log. How do I clear the active log?
Thanks in advance.
View 4 Replies
View Related
Sep 25, 2003
Hi....Does anyone know if there is a similar command to SQL2K's DBCC ERRORLOG.
I'm currently writing a preventative maintenance script and want to force archiving of errorlogs. Any help greatly appreciated.
View 3 Replies
View Related
Feb 10, 2006
It's been some time since I've written any SQL so I apologize if the answer to my question is obvious.
In pseudo-code here's what I want to do:
delete from table-1 all rows where the table-1.id = table-2.id and table-1.text = ""
Thanks in advance.
View 4 Replies
View Related
Dec 14, 2006
How do u clear Cache in SQL
if i run a query once it takes 10 seconds and if i run the same query again it takes 1 second because it is cached. So i want to know how i can clear it because i want do some benchmarking on a query that is in cache
View 5 Replies
View Related
Apr 8, 2008
does anyone know how to clear the sql "connect to server" popup server name list
View 13 Replies
View Related
Jan 15, 2006
Hello guys!
I would like to clear the logfile. Could anybody tell me how to do this?
What I would like most would be to run SQL-Server without any log-file (while development). But I suppose that this is not possible.
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
View 3 Replies
View Related
