Hi
i need to create a Report from XML file which available in my current folder.
can anybody suggest How to create a Data source from XML file and How to make a query for that.
Thanks
Mahesh
Hey All,
I am attempting to create a report on SQL Reporting Services that uses a local XML file as its datasource. Although i did not find a way to directly do this, I found an MSDN article that walks a person through on how to use a report parameter to paste in your XML data from the page. When I set up the report in this way, I get an "Invalid URI" error when I go to the preview tab.
http://msdn2.microsoft.com/en-us/library/aa964129.aspx
What would be the best way for me to use an XML file as a datasource using reporting services? Is there a way that I can use a local file and use a parameter to point at that file?
Any info, links, tuts, etc. would help. Thanks!
Nathan
how can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedI Want to Create Drill Down Report in SSRS . Here we Should Display Year Wise ,Month Wise, Day Wise For Particular party Salry . How To Do it?
View 2 Replies View RelatedI am looking to create an SSRS report based on multiple locations. There will be one report that presents a summary of all reports, and then individual report for each location.Instead of creating 2 separate reports, is it possible in SSRS to display different datasets based on the parameter selected?
View 3 Replies View Related
hai, iam new to ssrs please help me,
my report having 10 columns, i can explain my need with example that is, assume like this customer id is first column of my table customer id is 101 it having 3 departments a1,b1,c1,perticular department that is a1 having emp1,b1 having emp2,c1 having emp 3.
i want output like this when clicking + customer id driildwon it display 3 departments taht is a1,b1,c1, when +a1 drill down clicking i need to dispaly emp1, corresponding b1 to emp2 , c1 to emp 3.
above explanation is only one column of the table, like that iam also displaying this driiling procedure for remaining different columns.
and i need to display customer information by weekly,daily,monthly,yearly at bottom of the report
please give which logic used in creating format like above drilldown report which having multiple drilldowns for all columns in a table
if any body give procedure for creating fromat for drilldown report which having multiple drilldowns for all columns in a table is appriciate.
thanks
jacks
how to create indented child rows under the parent, in SSRS report. I am quite new to SSRS, the group by function works in a different (and obvious) way then what I want.I have a sample dataset as below.
Declare @Employee Table(Code varchar(10), Name varchar(500),
Organization varchar(100), IsChild bit, ParentId varchar(10))
insert into @Employee Values('BR456','Brandon','XYZ',0,NULL)
insert into @Employee Values('CR674','Carolina','ABC',0,NULL)
insert into @Employee Values('ME230','Melissa','PQR',1,'CR674')
insert into @Employee Values('JR987','Jerome','LMN',0,NULL)
insert into @Employee Values('JO435','Joseph','IJK',0,NULL)
insert into @Employee Values('ME321','Meghan','UVW',1,'JO435')
Is it possible to make this using some formatting options?
I need to create an report from SSRS and then exported it in excel for the user. It has dynamic header/footer and dynamic excel sheet name. The developer told that it is not possible to have both the things dynamic.
View 2 Replies View Related
I am not sure if this is possible or not, but I have to at least ask.
I have a SQL Reporting Services project that has a QA server version and then a Production server version. So when requested changes are made to the reports, I make the changes in Visual Studio and then push to QA. After the changes have been tested and approved, I then push the changes to the Production server.
I have come across an issue, where requested changes were made in Visual Studio (a lot of changes), and pushed to QA. The users now have changed their minds and they want instead to stay with what is in production. So, I am looking for a way to recover the report file on the production web server, bring it back into my visual studio project to replace the report that I had changed.
Is this possible, or will I have to start over and step one and reverse the changes in Visual Studio.
Let me know.
Thank you,
T.J.
Hi
I am tring to create a tool which should do the following:
will generate reports say 100 too 500 per week .
strore those reports as a pdf file and email the pdf file as an attachment to customer/donor .
Current system is In MS Access and not happy with it.
My first question is what programming language should I consider for automation of the file storage in PDF format . as we are looking for regenerating the reports with SSRS.
My second question is do I need to have Adobe writer / Adobe distller ?
Thanks in advance for sharing your experience regarding this topic.
Srabani
Hi all the good people here,
Can I generate a report without having RDL file physically at the server?
According to any "Generic Report Builder" logic, the report builder must stores the properties of Report in one form (RDL/XML) or the other (in database) and at the time of generating the "Report Output", builder must be reading those properties, assigning those to any class object's (say objRPT) properties/members and calling the method to generate the report in perticular file format.
I need a way where I can assign these values stored in the database (i.e. meta data of report is stored in database) to the objRPT directly. Can I do that.
I need this because I want to see whether I can switch from "Active Reports for .Net" to "SSRS" or not. I store all the meta data of the report into the database (including its control information, parameter mapping etc.) I have used Active Report's Events as well to show/hide controls/sections conditionally.
So in short as the metadata is in predefined-database, i don't want to bother with the RDL files. Can I do that?
Please help me with this.
Hi guys,
I have reports in text files, with the formatting and alignments all intact, and need not to be changed anymore. But then, if I were to display these reports using IE, the best choice I have would be using SSRS. But then, is there such a feature in SSRS where I can do that? Just to display these reports as they are?
Please help
Thanks!
Hi,
I am using expressions for the textboxes in the Table control Header, because the header names should be displayed in both English as well as in Japanese based on the language selection.The report works fine and all the render formatts except CSV are working fine.when i export this report to CSV, the header names are not coming in the first row of CSV , but some other textbox names (eg textbox 34..) are being displayed on the first row of CSV.From second row onwards, i am getting the header names seperated by comma and the data is being displayed.This header names are being repeated for all the rows in the CSV along with the data.Please give me a solution regarding this.
I tried by setting Data Element as "NO" from "Auto".I could stop the header names being repeated from second row in CSV, but i couldnot get the names in the first row of CSV.
I need to have all the header names as first row in csv and from the second row, i need data.
I'm trying to use SQL Server Reporting Services (SQL Server 2008 R2) to produce a CSV file. Row 1 in the CSV has to be a summary row with 8 columns. The detail rows which follow have 24 columns. The data in the summary row is "static" except for a date, a count of detail rows, and a total amount due based on the detail rows that follow. Here's an example of what we need it to look like:
HDR,4242,0,1,20150203,25,I,25823.18,,,,,,,,,,,,,,,,
DTL,4242,0,1,20150203,255092,20150129,989,C,Net 0,Due Upon Receipt,12703,Some Super Customer,1001 Grandview Dr,,SomeCity,TX,US,75012,9729990000,,,,
DTL,4242,0,1,20150203,255093,20150129,1360,C,Net 0,Due Upon Receipt,23774,Another Awesome Customer,52 Six Flags Dr,,DeepInTheHeart,TX,US,76006,8174445555,,,,
I've been able to get the report itself to render correctly in Visual Studio or from a browser using several different approaches but they all fail in one way or another when I try to save it as a CSV (eg, a header is prepended to each detail so they end up side by side, header and detail end up with extra columns, etc).
I have a report that is scheduled to run a once a week. This works fine. But now I would like this report to be saved as an Excel file automatically when it runs. how / where do I do this?
View 0 Replies View RelatedI am creating a SSRS report which would be executed by User manually through ReportServer URL.User would be generating the SSRS report for different Customer ID based on ad-hoc basis.
I am passing CustomerID as input parameter to the report. Is there any way to get the manually generated SSRS report name as 'Report_CustomerID_TodayDate.xls'.
E.g.If User is generating report for Customer ID 123 today then report name should be 'Report_123_07092013.xls'
Hello,
I'm looking for Programmatically genration of Report Model .smdl file.
Please guide me or suggest some links so that ui can refer same.
Is there any smdl genrator or any classes for the same...?
Thanks in advance.
Sandip
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.
The current way I have my asp.net 2.0 web app running reports is, based on an
interface the user selects the criteria for a report. The .RDL file is created
dynamically based on the user's selections.
I then need to SOAP the dynamically created report to the report server and
then the report runs fine.
BUT it requires Adminstrative rights to do this. Can this be accomplished
without giving the local machine admin rights. I am sorry if this question
has been answered before but i have not been up here in a while.
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
Can anybody provide a solution for this issue....
Thanks in advance
Nirupa
Hi,
Is it possible to turn a server report created using report builder (with all the smdl and dsv stuff) into a report
that is viewable using the Reportviewer ASP.Net control in _local_ mode? I need this because I'm trying to replace
the datasource used in creating the report by another one for viewing the report.
Thanks in advance,
Otmar
In my script task I have the following code. The task I'm trying to accomplish is:
If the filename on FTP can be found in the local archive folder of e: drive then show message "FileAlreadyThere" (I will ultimatley change it to do nothing); if the filename on FTP cannot be found in the local archive folder of e: drive then transfer the file to the local package folder on d: drive.
While the script task is executing I was watching it closely, but the problem i saw is that:
If some files on FTP are already in local archive folder and some are not, then it the files which are already in the archive folder are dumped to the package folder; then after that the files which are not in the archive folder are then dumped to the package folder. But I only want the new files on FTP to be transferred to the package folder for further processing.
Then after this is finished, I saw all the files in the package folder are refreshed one after another, after the first round of refresh the second round starts, after the second round finishes it then stopped. I saw it refreshes itself because the 'Date Modified' of the file changes. And I saw the script task turned green.
I don't see how the code below produced this result. Something is wrong in the logic of the loop? Anyone has any idea why it's behaving the way it is now? And how to change the code to accomplish what I want? Thanks a lot!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
cm.Properties("ServerName").SetValue(cm, "ftp2.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0")
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
ftp.Connect()
ftp.SetWorkingDirectory("/directory")
Dim fileNames() As String
Dim folderNames() As String
ftp.GetListing(folderNames, fileNames)
If fileNames Is Nothing Then
MsgBox("NoFileOnFTP")
Else
Dim fileName As String
For Each fileName In fileNames
If File.Exists("c: emp" + fileName) Then
MsgBox("FileAlreadyThere")
Else
ftp.ReceiveFiles(fileNames, "c: emp", True, True)
End If
Next
End If
ftp.Close()
End Sub
End Class
Hi,
I wanted know that how I can create database in local machine?.
Thanks,
Ravi
I have an installation script and want to create a database based on some data in a table (config). Testing the script though I get a message:
Msg 170, Level 15, State 1
Line 12: Incorrect syntax near '@DBData'.
The relevant sql is:
declare @DBName varchar (40)
declare @DBData varchar (40)
declare @DBLog varchar (40)
declare @DBSize int
select @DBName = obj_txt from config where obj_nm='DBName'
select @DBData = @DBName + '_Data'
select @DBLog = @DBName + '_Log'
select @DBSize = obj_int from config where obj_nm='DBSize'
raiserror('Creating Database %s ....',0,1,@DBName) with nowait
Create Database @DBName
on @DBData = @DBSize
Log on @DBLog = @DBSize
I don't think there's anything wrong, apart from the fact I am using the local variables. Is this allowed on a Create Database statement? I haven't found anything in Technet that may help.
Here's hoping....
Thanks
Dan
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedHere is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedHi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View Related