I have several packages that I download files using a sql task (I cmd shell out). I use sql task because the file names change everyday. what I want to know is how can I check to see if the file I downloaded exists either within the same task (preferred) or a task right after?? I want to fail the package instead of letting it get into the actual loading of the file where it now fails at.
I hope this makes sense.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedI have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedI have a DTS package in which I would like it to fail if the table is empty. I would like to create the first task as this check (i.e. select @cnt = count(*) ... if @count = 0 then fail the task (to prevent further DTS Task processing.
Does anyone have an example or suggestion on how to set this particular Execute SQL Task to fail?
Thank You
Jamie Reis
I have a dts package that is essentially three transformation tasks that creates 3 text files. The transform data is accomplished through an sql query. Before I execute the transform tasks I would like to peform a couple of simple existence checks to verify data: i.e,
if exists (select * from table where week_ending = endoflastweek(getdate())
I could put the statement into the sql (if exists, begin/end) of each of the transformation tasks and prevent the process from executing, but it would be easier to put it into an "execute sql task" and if it succeeds, fail the task or make some kind of declaration not to proceed. I'm not sure how to do this...I know this can be done with an activeX script,
Main = DTSTaskExecResult_Failure
Is there a way to do this in an execute sql task step?
Greetings,
I have a stored procedure with a TRY / CATCH block. In the catch block I capture information about the error. I then use RAISERROR to "rethrow" the exception so that it will be available to SSIS.
I execute the stored procedure through a SQL task. I observe that SSIS reports the SQL task succeeds (the task box turns green) when RAISERROR is invoked. If I comment the catch block with RAISERROR then SSIS reports the task failed. (I created a simple procedure that does a divide by zero to force an error.) The expected error message is displayed when the sproc is run from the SQL Server Management Studio command line so I believe that the stored procedure is doing what I intended.
I would like to handle an error within my stored procedure without destroying SSIS's ability to detect a task failure. Is this possible? Is there an alternative to using RAISERROR?
Thanks,
BCB
In a DTS package, I have various SQL tasks which are linked by workflows, either 'on success' or 'on failure'.
What is the sql statement for making a sql task fail so that it follows the 'on failure' workflow?
Thanks
I'd like to use a SQL Task to execute a stored proc, which checks for a value, and if I don't like the result, raise an error. If the stored proc fails I'd like the package to fail as well.
When I run the stored proc outside of the package, it fails as it should. However, when I run it in the package, the package does not fail. It moves on to the next task and completes normally.
Any ideas on what I may be doing wrong?
Thank you,
Perry
I am using a Send Mail task inside a For Each container that pull variables from a query. The package finishes without any errors every time. When there is no CC recipient, however, the email is seeminlyg never sent/recieved. I checked the SMTP logs and it looks like the SMTP relay is getting the message. The mail works fine if I add a CC. I've tested this by itself, and outside the For Each container there is no problem.
Has anyone seen this problem?
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
Hi,
I am using an XML task for validating the XML data against the Schema XSD. I have more XML Files with same the schema. I have to used a for loop container which has an XML task for validate XML. The loop container gets the XML File into variables name "XMLFileName" which the loop current file, in turn, used by XML Task for validation.
XML task is configured in the option "Validate". I have provided the XML Data in variable name "XMLFileName" also get the name from the loop container and XSD file content File Connection. XML Task stored the result in the another variable name "OKFormat". FailOnValidationFail property set to false.
It had the error when I run the package, the error msg as below:
Error: 0xC002F304 at XML Task, XML Task: An error occurred with the following error message: "Data at the root level is invalid. Line 1, position 1.".
Error: 0xC002928F at XML Task, XML Task: Property "New Source" has no source Xml text; Xml Text is either invalid, null or empty string.
Task failed: XML Task
After that, I had to change the source type from Variable to File Connection, and had to test fixed to some xml file it had ok for validate the XML file againt XSD.
I don't know this is the wrong setting or bug of SSIS, anyone can guide me through.
Why does the Execute Package Task in SSIS always fail when set to execute in-process?
Having ExecuteOutOfProcess = False always results in that the package fails when run from within BI Studio.
I have also tried it from Command Line using dtexec., same results.
The problem with setting ExecuteOutOfProcess = True all the the time and running from within Bi Studio is that an enourmous amount of processes is created, none of which die because SSIS runs in Debug mode, another problem which is there doesn't seem to be a way to run it in Release mode so as not to get so many Dtexec processes, which ultimately results in having the Server die.
By Dying I mean, thrashing of the CPU & Memory. Page file to extreme limits.
And yes, the hardware should be able to take much more than what SSIS is supposed to eat. Dual 3GHz Xeon & 4GB of Ram.
Thank you.
My kind regards,
Eng. Ahmad Alkilani
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
Hi all,
I have a Send Mail Task in my control flow to notify users that the processing is done. I want to avoid the package to fall in error if the Send Mail task failed.
What is the best practice to do that ?
Should I raise the MaximumErrorCount of theSend Mail Task ? Should I play with ErrorHandler ?
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
SET ERRORLEVEL = 1
Any ideas? Thanks!
We find that if we deploy the OLAP database with a different name on the test server, then regardless of how we change the connection string provided to the SSIS package that processes the cube, then the package fails to connect to the database. To clarify:
In development the OLAP database is called MyOlapDB and the source database is called MySqlDB. Both are on the same machine. When the the application is built and released for test, the test team install the databases on a replica of the production environment (i.e. web app on one machine, OLAP DB on another and SQL database on yet another). They also, quite rightly, implement the new test databases so they incorporate the build version number. So, MyOlapDB123 and MySqlDB123 are both from build 123.
This is when the problems start. Regardless of how the connection string is specified in the job that processes the cube, the SSIS integration package fails with the error:
[Analysis Services Execute DDL Task] Error: Errors in the metadata manager. Either the database with the ID of 'MyOlapDB' does not exist in the server with the ID of 'OurTestServer', or the user does not have permissions to access the object.
We have tried config files and job properties, but neither work. Also, simply attempting to run the package using the DTEXECUI does not work either.
Looking inside the XML of the package, we clearly see the ConnectionManager object which has the original connection string, which is
Data Source=localhost;Initial Catalog=MyOlapDB;Provider=MSOLAP.3;Integrated Security=SSPI;Impersonation Level=Impersonate;
However, editing the initial catalog here still does not solve the problem. Searching the XML for the string MyOlapDB reveals the OLAP database name in two other places - both within the object data of the two Analysis Services Execute DDL tasks.
Anyone know how to solve this problem without having to hack the XML of the package?
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
Hi y'all,
I'm facing a database data transmission problem during synchronysing. When dts fails i need a better solution instead inconsistent data.
I'm looking for data comparer for sql server where i have total control of my actions.
Any suggestions.
THanks in advance!
Can anyone direct me to a good resource for setting up SQL2k in a failover cluster. I am trying to do this without a shared disk array, and need more info.
Thanks.
Does anyone know of a Fail Over Document for SQL Server 2000 Enterprise edition?
View 1 Replies View RelatedHI Friends
One of server my job is getting fail. It will showing log speace is full but log speace is 24GB But actually my log file actual speace is 30GB How can i handile this isssue plz help me urgent
Thanks
MS
Hi
I have scheduled a job and the job is getting failed.I have scheduled two DTS packages in the job.But when I run the DTS Packages separately its running fine without throwing any errors.But when the Job fails I am getting the error message like "Dts package not found"
The error message which I am getting while the Job fails is
"Executed as user: TESTsqlservice. DTSRun: Loading... Error: -2147217900 (80040E14); Provider Error: 14262 (37B6) Error string: The specified DTS Package ('Name = 'DTS_MASTER'; ID.VersionID = {A35AEABF-8F05-41B5-A4C9-47F57A3208B9}.{[not specified]}') does not exist. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed. "
Can anybody pls help me on this.
how do i fix this? syntax pls!!
There was a problem running the DBCC.
SQL Server returned the following error message:
Table Corrupt: Object ID 213575799, index ID 2, page (1:951), row 68. Test (ColumnOffsets <= (nextRec - pRec)) failed. Values are 21 and 0.
I am trying to set up a DTS to transfer logging data from one server to another.
The record may already exist at the destination causing a primary key violation. I do not want this error to cause the entire DTS to fail.
When I execute the DTS I created by right clicking and selecting "Execute Package" it shows me 2 errors. Although there are 2 errors the rows that do not have a primary key violation are successfully transfered to the destination database.
Here are the 2 errors I see:
Error 1:
Error at Destination for Row number 97. Errors encountered so far in this task: 97.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_event'. Cannot insert duplicate key object 'event'.
Error 2:
Error at Destination for Row number 198. Errors encountered so far in this task: 198.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_eventDetail'. Cannot insert duplicate key object 'eventDetail'.
These errors make sense, there were 97 duplicate lines in the event table and 198 duplicates in the eventDetail table.
This is the behavior I want. New rows are copied to the destination database.
When I schedule the DTS as a Job in the Enterprise manager things change. When the DTS is executed as a Job (as opposed to me right clicking and selecting "Execute Package"), the job reports a failure and none of the new rows are transfered to the destination database.
Why does the DTS transfer the rows that do not violate the Primary Key constraint when I manually execute it and not when it is executed as a job?
How can I get the DTS to function as desired?
Thanks,
Andy
Hi,
i m facing this error when running DTS on IDENTITY(1,1) Field.
how can this field increment automatically ???
Step Error Source: Microsoft Data Transformation Services (DTS) Data Pump
Step Error Description:The number of failing rows exceeds the maximum specified. (Microsoft Data Transformation Services (DTS) Data Pump (80040e21): Insert error, column 14 ('s_no', DBTYPE_I4), status 10: Integrity violation; attempt to insert NULL data or data which violates constraints.) (Microsoft OLE DB Provider for SQL Server (80040e21): Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.)
Step Error code: 8004206A
I'm trying to get a job to fail using a stored procedure command.
I have been using:
EXEC sp_stop_job @job_name = 'Archive Tables'
But this command only cancels the job, I want to the job to report back a failure.
Is there a sp_fail_job, or a sp_quit_job or something?
Thanks in advance
i tried to install sql 2005 and first time succesfully, but not able to see "Enterprise" manager even during installation i select all features.i was told unstall Visual Studio MS Express and try again. it didn't work neither. in the end i have unstalled SQL, Express SQL from Visual Studio, delete SQL from Programm Files and even clean up register still the same problem. am i doing something wrong?
thank you
Hi,Is it possible to somehow set a SQL Server DTS job to automaticallydisable itself, when it encounters a fail, so that future scheduledoccurrences don't happen until the problem has been fixed?I've hunted about for this on the web, but drawn a blank unfortunately!Many thanks if anyone can help at all.
View 2 Replies View RelatedI had link my 4 of workstations to server with MySql.1 pc of my pc can run a software which can update MsSql perfectly but notothers(3 failed).I tried to add System Dsn data source for Control Panel - Odbc data source32.The pc which working fine with the software function but 3 of the rest not.My pcs running xp and win98 !Regards.Thanks.Leslie Lim
View 5 Replies View RelatedHi,In case of failover to standby server, what is theest way to redirectclient applications to new server?1) DNS name change -- not viable due to Caching issue.IS there any alternate like Oracle's onames/LDAP for resolving namewith sql server?Can use Sever alias?Thanks
View 6 Replies View RelatedHello,
I'm using SQL Reporting services 2000 SP2.
I create a report and when i select pdf format in the export dropdownlist and i click on export, a popup (open/save) appears but when i click ok, i've an error message : "IE can't download Format=PDF of IP_ADRESSE".
If i do the same thing with excel type in the dropdownlist it works!
Do you know why?
Hi, sorry again, l've a package which call the FTP tasks. In design-time, it works fine. While l put it into SQLAgent to run in schedule. It fails. The package log file said,
OnError,MAXIS-SYSOPT,NT AUTHORITYSYSTEM,FTP Raw File Motorola,{b3b941f5-ebc2-4b38-b314-87ff4827c2a8},{E93D51C5-539E-4CEE-B616-BBCFF9FA813E},4/18/2006 3:18:23 PM,4/18/2006 3:18:23 PM,-1073573489,0x,Unable to connect to FTP server using "Metrica FTP".
Does anyone know what's happening?
Dear All
In SQL Server 2000, I schedule a job to run a exe. I expect the return of this result show the success or fail. However, I find the job keep running if fail. Actually, I want to see the failed status in enterprise manager.
Could you give me some suggestions how to return a fail from VB6 program to SQL Server? Maybe give me other directions to solve the problem? Thanks a lot.
More Information
I run the exe by double click. if it fail, it return a prompt message box.
Alex