How To Get The 2nd The 2nd Record AND DISPLAY IN SINGLE ROW ?
Apr 18, 2006
Can you please assist me on how to get the 2nd record in case there are
3 or more records of an employee, the query below gets the MAX and MIN
BasicSalary. However, my MIN Basic Salary is wrong because I should get
the Basic Salary Prior to the 1st Record (DESC)in case there are 3 or
more records and not the last Basic Salary of the Last Record.
How to GET the 2nd Row of Record in Case that There are 3 or more
records IN A SINGLE ROW ???
---------------------------------------------------------------------------*-----
This query gets the Max and Min Basic Salary on a certain Date Range.
In case there are 5 records of an employee on certain date range how
can I get the record before the Max and would reflect as my OLDBASIC,
if I use TOP2 DESC it will display 2 records. I only need one record
which should be the Basic Salary before the 1st record on a DESC order.
Please add the solution to my 2nd Select Statement which get the
OLDBASIC salary Thanks ...
SELECT TOP 100 PERCENT E.EmployeeNo, E.LastName, E.FirstName,
E.SectionCode, E.Department, E.DateHired, E.Remarks,
(SELECT TOP 1 ([BasicSalary])
FROM empsalaries AS T14
WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND
@ToDate
ORDER BY startdate DESC) AS NEWBASIC,
******************************* BELOW I SHOULD ALWAYS GET THE BASIC
SALARY PRIOR TO THE 1ST RECORD AND IN A SINGLE ROW ???
(SELECT TOP 1 ([BasicSalary]) (
FROM empsalaries AS T14
WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND
@ToDate
ORDER BY startdate ASC) AS OLDBASIC
FROM dbo.Employees E
WHERE CONVERT(VARCHAR(10),E.DateHired, 101) BETWEEN @FromDate AND
@ToDate
ORDER BY E.LastName
View 2 Replies
ADVERTISEMENT
Sep 25, 2015
The stored procedure takes ~ 10 seconds every call. The execution plan is Index seek or clustered index scan almost everywhere . No table spools or lazy loads or key lookups. Cannot share the code or execution plan due to company rules and regulations.Issue is that i am dealing with result set of around 50,000 records . Out of these i have to return 20 records at a single time (which is also customizable i.e 40 / 60/ 150 records in a page). Application cannot handle all 50k records so i have to return 20 records for every stored procedure call.
The result set changes as per the start date and end date which i recieve as parameters. In application there are few Column filters namely- Country(around 50 countries), Outcome(around 6 to 10 values ) . These filters will values in drop down( as excel ) depending on the distinct values in that columns. These filters will be populated on every page, if no filter value is selected.Issue is if user does sorting or filtering any records , this stored procedure is called and every time i have to deal with ~50000 records.
Current Code :
Step 1 ) Get the required result set in temp table .
Step 2) Compute the results on some business rules . (Outcome and SharesAvailable calculation - see attachment)
Step 3) populate filter Columns (Country,Outcome) these values will be comma seperated.
Step 4) Dynamic query to get required result set i.e if user wants only 10 records in single page then TOP 10 . Sorting can be applied on any column mentioned in screenshot.
View 9 Replies
View Related
Mar 14, 2008
I have a table with only one column as
Emp_Name
A
B
C
D
E
I want to display this data as
Emp_Name
A, B, C, D, E
Is this possible? I am using SQL server 2005.
Any help is appreciated.
Regards,
Vinesh
View 2 Replies
View Related
Dec 15, 2007
DECLARE @emp VARCHAR(1024) declare @emp1 varchar(1024)declare @emp2 varchar(1024)SELECT @emp1 = COALESCE(@emp1 + ',', '') + cast(eid as varchar(10)),@emp = COALESCE(@emp + ',', '') + ename ,@emp2 = COALESCE(@emp2 + ',', '') + desigFROM emp SELECT eid=@emp1,ename = @emp,desig=@emp2
View 1 Replies
View Related
Jul 25, 2005
I want to know how to display only each of it where in my database for example the ProductItem got a lot of value of '1000' in it. i only want it to display once.
ProductItem | Name
1000 | ABC
1000 | DEF
1000 | HIJ
2000 | KLM
3000 | NOP
I want in my dropdownlistbox only display 1000, 2000, 3000.
I using the 'Select ProductItem from Product' for sure it will display 1000,1000,1000,2000,3000. So to filter it.
Thanks
View 7 Replies
View Related
May 22, 2008
Hi Guys,
How do I display an item in a day? This is a featured product of the day. This will change everyday. I can do this in classic ASP but not in stored procedure.
Table:
This is just to give you an idea of the table
ID | ProductName | DatePosted
----------------------------------------
1 | item1 | 5/1/2008
2 | item2 | 1/2/2008
3 | item3 | 6/2/2007
and so on...
Can someone please help me?
Thanks in advanced.
View 12 Replies
View Related
Mar 10, 2008
I wrote a Scalar UDF in SQL2005 that returns an integer. I want to be able to display this integer in a ASP.Net 2.0 web page. I typically use a DAL for all data so I added an ObjectDataSource as a Qeury that contains only the UDF. How do I easily display the value in a Label Control or?
I have tried to use a Repeater with a label, a Formview with a Label, all to no avail. Any suggestions?
View 12 Replies
View Related
Sep 18, 2013
I have view with Patients name and Appointment table where I save those patients. In form I have 2 comboboxes. For PatientComboBox source is store procedure based on Patient view. For PatientAppintmentComboBox I would like to create store procedure.
How to create store procedure to display only one PatierntName record in PatientAppointmentComboBox if Patient_Id selected from PatientComboBox exist or not exist in Appointment?
View 3 Replies
View Related
Oct 30, 2015
i hav four cells that display
startdate | %completed| taskname | indicator
[startdate value]|[%completed]|[taskname value]|[indicatorfield value]
task name and indicator are grouped by years and months
i want all these in a single cell with a separator.
View 6 Replies
View Related
Jul 21, 2005
This is my case. I want in my datagrid to display first record from table A and second record from table B. This is because i need to display a price in the column where it will have current price and history price, therefore the first row will be current price and second row will be history price.
This is the output that i trying to do.
Item | Price
-------|---------
A | 2.50 --------> Table A
A | 1.50 --------> Table B
Please let me know if my explanation is not details enough.
Thanks
View 2 Replies
View Related
Aug 3, 2015
I would like to display all the products with maximum SeqNo from the table below:
TABLE
ProductIDSeqNoBalance
111215
11135
111420
111510
12115
1212100
121325
121445
OUTPUT
ProductIDSeqNoBalance
111510
121445
View 3 Replies
View Related
Mar 30, 2008
I would like to show when leads updated last their records in database. An automated report that tells me when the last date was that the leads updated an entry, only 1 entry per lead.
select Lead,LastUpdated from dbo.KPITbl
I have a table with data that looks like this:
Lead LastUpdated
----------- -----------------------
JOHN SMITH 2008-03-26 08:45:00
JOHN SMITH 2008-03-20 09:33:00
MEG RYAN 2008-02-21 16:16:00
JOHN SMITH 2008-02-21 16:19:00
MEG RYAN 2008-02-21 16:22:00
JOHN SMITH 2008-03-28 16:10:00
JOHN SMITH 2008-03-28 08:49:00
JOHN SMITH 2008-03-23 19:23:00
MARK MCRAE 2008-03-27 03:12:00
MARK MCRAE 2008-03-26 08:48:00
MARK MCRAE 2008-03-26 08:46:00
JOHN SMITH 2008-03-26 08:47:00
JOHN SMITH 2008-03-26 08:48:00
ALLAN WHITE 2008-03-26 08:43:00
ALLAN WHITE 2008-03-26 08:40:00
JOHN SMITH 2008-03-26 08:48:00
Thank you appreciate it.
View 2 Replies
View Related
Mar 21, 2008
Do anybody know how can I find or display to the current SQL server 2005 record number (eg. 10 of 1600) on a VB 2005 form label. The BindingNavigator on the form has been deleted. Thanks.
View 6 Replies
View Related
May 28, 2004
OK,
This one is driving me nuts. I've issued a very simple statement to delete a single row from a table. It appears that when I execute it in SQL Query Analyzer the CPUTime spikes and holds one of the CPUs on the box pegged at 100%. I've let this thing run for over a day, and it's not deleting the one damn record. Any thoughts? :confused: :confused: Here's the command I'm executing:
DELETE FROM Invoices WHERE InvoiceID = 153345
Running SELECT * FROM Invoices WHERE InvoiceID = 153345 returns only a single record as it should. InvoiceID is the PK in this table. Any and all help is greatly appreciated. I've rebooted the server, but to no avail. Same thing happens after a reboot.
TIA
View 12 Replies
View Related
Aug 16, 2007
From SQL Server Books Online, there is a topic: Concurrency Effects, and did mention the following side effects:
- Lost updates.
- Uncommitted dependency (dirty read).
- Inconsistent analysis (nonrepeatable read).
- Phantom reads.
Can someone please tell me which type of Isolation Levels in the Database Engine to avoid the above side effects respectively.
For Record Locking issue:
Example, two editors make an electronic copy of the same document. Each editor changes the copy independently and then saves the changed copy thereby overwriting the original document. The editor who saves the changed copy last overwrites the changes made by the other editor.
This problem could be avoided if one editor could not access the file until the other editor had finished and committed the transaction.
For the above example, is it possible to do like this way:
Editor 1: SELECT and Lock a record
Editor 2: Before SELECT the record, check for the record whether it is locked or not. If it is not lock, then the record can be selected
Please advise.
Thanks.
View 2 Replies
View Related
May 25, 2015
Here the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday')
---
DECLARE @ITEM_ID uniqueidentifier
DECLARE ITEM_CURSOR CURSOR
[Code] ....
View 1 Replies
View Related
Dec 21, 2005
I am duplicating a record from my asp.net page in to the database. When i click on save I am getting the following error message
Violation of PRIMARY KEY constraint 'PK_clientinfo'. Cannot insert duplicate key in object 'clientinfo'. The statement has been terminated.
The above message i am getting since i have tried to duplicate the clientname field of my table which is set as the primary key.
What i want is instead of this message in the browser i need to display an alert saying "the clientname entered already exists" by checking the value from the database.
Here is my code. pls modify it to achieve the said problem
if(Page.IsValid==true) { conn.Open(); SqlCommand cmd = new SqlCommand("insert into clientinfo (client_name, address) values ('"+txtclientname.Text+"', '"+txtaddress.Text+"')", conn); cmd.ExecuteNonQuery(); conn.Close(); BindData(); txtclear(); System.Web.HttpContext.Current.Response.Write("<script>alert('New Record Added!');</script>"); Response.Redirect("Clientinfo.aspx"); }
View 1 Replies
View Related
Sep 26, 2006
I am using a drop down list box to select values from an SQL 2000 DB. I have put a record into the table which says"...Select Item"I used the dots so that It will apear at the top of the list and therefore display at startup. I also have a gridview to allow users to edit and delete from the same table.I am worried that a user may accidently delete the "...Select Item" row from the table.Can anyone think of a way round this? Is it possible with SQL Server 2000 to stop a single record from being deleted?Any help would be most appreciated.ThanksPaul
View 4 Replies
View Related
Feb 12, 2007
HiIs it possible to return the results of a query so that instead ofhaving say 10 rows its concatenated, egMy query returns 'M' 10 times, can this be returned as 'M M M M M M MM M M'?ThanksLee
View 3 Replies
View Related
Oct 12, 2007
How to get
Code Block
a record value instead of aggregated value with GROUP BY?
Assume that I have a PRODUCT_COMMENT table defined as below. It logs
the multiple comments for products. A product may have multiple
comments logged at different time.
Code Block
CREATE TABLE [dbo].[PRODUCT_COMMENT](
[COMMENT_ID] [int] IDENTITY(1,1) NOT NULL,
[PRODUCT_ID] [int] NOT NULL,
[COMMENT] [nvarchar](50) NULL,
[UPDATED_ON] [datetime] NOT NULL,
CONSTRAINT [PK_PRODUCT_COMMENT] PRIMARY KEY CLUSTERED
(
[COMMENT_ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY
= OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[PRODUCT_COMMENT] WITH CHECK ADD CONSTRAINT
[FK_PRODUCT_COMMENT_PRODUCT] FOREIGN KEY([PRODUCT_ID])
REFERENCES [dbo].[PRODUCT] ([PRODUCT_ID])
GO
ALTER TABLE [dbo].[PRODUCT_COMMENT] CHECK CONSTRAINT
[FK_PRODUCT_COMMENT_PRODUCT]
I would like to use the following SQL statement to get the latest
comments for all products.
Code Block
SELECT PRODUCT_ID, COMMENT, UPDATED_ON
FROM PRODUCT_COMMENT
GROUP BY PRODUCT_ID
HAVING UPDATED_ON = MAX(UPDATED_ON)
But this leads to the following error:
Code Block
Column 'PRODUCT_COMMENT.UPDATED_ON' is invalid in the HAVING clause
because it is not contained in either an aggregate function or the
GROUP BY clause.
Is there a way to do that?
Thanks!
View 5 Replies
View Related
Sep 20, 2007
Hi all!
I have imported a table into SQL Server from a legacy program. Each record has a repeating sequence of similar fields. (Ex. Accnt1, Assesed1, Paid1, Accnt2, Assesed2, Paid2, etc.) I would like to take a single record and put data from these fields into a table that has the columns Accnt, Assesed, and Paid. I am doing this for easier use in a program I am developing in VB 2005. Can this be done in SQL or do I need to have help from some VB code? If it's possible, what might the SQL look like?
Thanks.
View 3 Replies
View Related
Oct 6, 2005
Good day!
I just can't figure out how I can display only the top record for the duplicate records in my table.
Example:
Table1
Code Date
01 10/1/05
01 10/2/05
01 10/3/05
02 9/9/05
02 9/9/05
02 9/10/05
My desired result would be:
Table1
Code Date
01 10/1/05
02 9/9/05
Thanks.
View 12 Replies
View Related
Nov 17, 2015
For my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:
image1|image2|image3|etc...
View 3 Replies
View Related
Jun 19, 2007
Is me again,and now i facing problem to retrieve a single record from the database.
here is my code:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim user As String user = TextBox1.Text Dim varpassword Dim mydata As SqlDataSource
mydata.SelectCommand = "Select * from tbluser where uLogin = '" & user & "'" varpassword = mydata.SelectCommand.uPassword
End SubEnd Class
but i get the error : 'uPassword' is not a member of 'String'
i wan to retrieve the password of that user,can anyone help me?
thanks
View 3 Replies
View Related
Aug 6, 2004
Hi ,
I little question for you ... is it possibile to write a SQL statement to delete records in several tables at the same time?
For example if I've two tables involved by join
DELETE <...> from Customers A
INNER JOIN CustomerProperties B ON A.CustomerID=B.CustomerID
I Must use two statement to remove records from both the tables?
Thx
View 3 Replies
View Related
May 3, 2007
I have two tables
TermID, Term
1--- Abc
2--- Test
4--- Tunic
and
TermID, RelatedTermID
1 --- 2
1--- 4
2--- 4
I need to get back something like this
TermID, Term, RelatedTermsInformation
1--- test--- test,tunic#1,4
that above was my solution, get the relatedterms information and comma separate, and then put a # and get all the ids comma separate them and then put the in one field. then I can later parse it in the client
this does not seem like a very good solution ( or is it?)
If posible it would be nice to get something like this
TermID, Term, RelatedTermsInformation
1 test RelatedTermsTwoDimentionalArray
but I am not sure how this idea could be implemented using the capabilities of SQL.
my other option is have the client make one call to the database to get the terms and then lots of another calls to get the relatedTerms, but that will mean one trip to the DB for the list term, and one call for every single term found.
any ideas in how to make this better ?
View 8 Replies
View Related
Jan 28, 2008
Hello:
I have the following table. There are eight section IDs in all. I want to return a single row for each product with the various section results that I have information on.
productID SectionID statusID
10 1 0
10 2 1
10 3 2
10 4 1
10 5 3
10 6 1
11 1 0
11 2 1
11 3 2
11 7 3
11 8 3
Need to return two rows with the respective values for each section.
productID section1 section2 section3 section4 section5 section6 section7 section8
10 0 1 2 1 3 1
11 0 1 2 3 3
Any information or if you can point me in the right direction would be appreciated.
Thanks
View 4 Replies
View Related
May 2, 2008
Is there any way to use a single record (Which had Connection String) for all my packages in the project ?
I don't want to have multiple connection informations for each of the packages (Based on Configuration Filter)
View 3 Replies
View Related
Mar 26, 2008
Hi, I have a difficult case that I need to solve. I will try to be the very clear explaining my problem:
I have a sql query which brings me many records.
This records have a column in common which have the same value (COL1)
There is a second column (COL2) which has different values bewteen these records.
I need to concatenate values from the second column in records with same value in COL1. And I need only one record of the ones that have the same values. If two records have the same COL1 value, only one row should be in my result.
Let me give you an example:
COL1 COL2
RECORD1 1-A HHH
RECORD2 1-A GGG
RECORD3 1-B LLL
RECORD4 1-B MMM
RECORD4 1-B OOO
RECORD5 1-C NNN
Me result should be:
COL1 COL2
RECORD 1-A HHHGGG
RECORD 1-B LLLMMMOOO
RECORD 1-C NNN
It is clear what I need? I dont know if I can solve it through sql or any function inside SSIS.
Thanks for any help you can give me.
View 5 Replies
View Related
May 26, 2015
I have records like below, single query to get result below, basically records that has single entry only, which has type '0'
table : temp_test
idtype
c10
c25
c30
c40
c47
c59
c64
c60
c77
c80
c90
Result out of query
idtype
c10
c30
c80
c90
View 4 Replies
View Related
Aug 7, 2015
I'm trying to pull all records from one table and just a single record from another. I have this join, (see below). It works ok, but the problem is if a blog record doesn't have a corresponding image record it doesn't return. The end result should be the blog record and a single corresponding image record. But always a blog record.
SELECT
[Blogs].[ID],
[Blogs].[BlogTitle],
[Blogs].[BlogType],
[Blogs].[BlogText],
[code]...
View 6 Replies
View Related
Sep 16, 2015
My tables look like this:
Users //
table
UserID // pk
UserName // varchar
UserFamilyName // varchar
User_Friends //
table
FriendsID // pk
UserID // fk
FamilyName // varchar
MY query:
SELECT
U.UserFamilyName, F.FamilyName
FROM
Users U LEFT
JOIN User_Friends
F ON U.UserID =
F.UserID
WHERE
U.UserName = ‘JOHN’
How do I adjust my query to select just the very first record from Users_friends, I want only the top first one.And if there are no friends how can I return an empty string instead of Null.
View 10 Replies
View Related
Jul 9, 2007
What is the most efficient standalone .NET class that can hold a single disconnected record? The class must also retain column names, but other schema is not relevant (.NET data type is sufficient).If I understand System.Data.Common.DbDataRecord, it provides an interface on a DbDataReader, and has no storage of its own.I'm familiar with DataSet, is that the only .NET-standard class to do this? Thank you,Shannon
View 7 Replies
View Related