Hi,
I Have a correct connectionstring and it connected the database without any problems but once I close the program, the problems start. When I reopen the solution, I recceive error messages as
The databse already exists, choose a different database name.
What does this mean?
What happened to the connectionstring?
I have the Visual Studio 2005 Team Suite trial version and the SQL Server 2005 trial (which came with team suite) installed in my machine.
When I installed the SQL Server 2005 I installed it in the Windows Authentication mode. So every time I open SQL Server 2005 it doesnt ask for Username/Password (Its greyed out). The only thing available were:
Server Type: Database Engine
ServerName: ServerSue
Authentication: Windows Authentication.
Here is my Problem:
I created a small application in C#. In the web.config file I created the following:
<appSettings>
<add key="resumecon" value="SERVER=ServerSue;database=Resume;"/>
</appSettings>
Then in the Code behind I created the following string:
string strResCon = ConfigurationManager.AppSettings["resumecon"].ToString();
Then in method (for a Login page) I created the connection string as follows and wrote code to insert some values into the Resume database. I called this method on a button click event.
SqlConnection conLogin = new SqlConnection(strResCon);
When I run the page and when I click the button I get the following error:
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
I think some thing is wrong in the addkey of webconfig? How do I change this?
Hi all,
I use SqlHelper to connect to database. I need to set a timeout to execute some sp because I don´t want to wait for this sp if it make me wait a lot. So I set the Connection TimeOut every time I execute a sp. But this seems not working properly. I set this value to 5 and I execute a sp than runs in 15 but It waits for it.
Any idea
Best regards
www.ITCubo.net
My total test page is shown below. I monitor the connections by SP_WHO2. Without the second call, connection pooling seems to be working, ie I refresh my browser repeately but the number of connections as seen from SP_WHO2 does not increase.
However, if I have the second call, every time I refresh the page at the browser, the number of connections increases by one. This is obviously not acceptable in a real world application.
I tried both Integrated Authentication (with no impersonation) and using a hardcoded service account. Both have the exact same results. In fact this test is not about multi-user yet, it is the same single user just refreshing the same page.
May I know what have I done wrong? All the documentation from Microsoft says close the connection after using it. In the case of SqlDataSource how do I close the connection?
Thanks
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
protected void Page_Load(object sender, EventArgs e)
{
SqlDataSource1.SelectCommand = "Select ID from Master";
System.Data.SqlClient.SqlDataReader reader =
(System.Data.SqlClient.SqlDataReader)SqlDataSource1.Select(DataSourceSelectArguments.Empty);
if (reader.HasRows && reader.Read())
Label1.Text = reader["ID"].ToString();
SqlDataSource1.Dispose();
//second call: read from another table
SqlDataSource1.SelectCommand = "Select Name from Students";
reader = (System.Data.SqlClient.SqlDataReader)SqlDataSource1.Select(DataSourceSelectArguments.Empty);
if (reader.HasRows && reader.Read())
Label1.Text += reader["Name"].ToString();
reader.Close();
}
</script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Label ID="Label1" runat="server" Text="Label"></asp:Label>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
DataSourceMode="DataReader"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Im getting quite desperate and frustrated!! I have installed SQL 2005 Express successfully and can connect to it fine using Management Studio locally.
If I try and connect remotely using Management Studio Im getting the old Error 10061 : The machine actively refused the connection!
I have set it up exactly as per all documentation and help from the forums. Remote connections is on TCP and Named Pipes, I even have the firewall disabled.
Im running it on Windows Server 2003 Standard.
Any help would be really apriciated as i have tried everything!!!
I see a few have had this problem but their answers didn't help.
My connection string:
"Data Source=.SQLEXPRESS; Integrated Security=True;AttachDbFilename=|DataDirectory|TestApp.mdf;Initial Catalog=TestApp"
and the error a am getting is:
Cannot open database "TestApp" requested by the login. The login failed.
Login failed for user 'ComputerName\TheHaggis'.
Like i said it work a couple of times and then i get this error.
what am i do wrong
cheers
the Haggis
Hi, I'm fairly new to the asp.net enviroment.. I have a project in asp.net and I need to upgraded to asp.net 2.0... I just did that, and the few errors that I got are resolved already, the only error that I have not been able to figure out is when I tried to retrieve data from a database I get the following error:
An error has ocurred while establishsing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:Named Pipes Provider, error:40- could not open a connection to SQL Server) and it points to the following line:
Dim ds As DataSet = Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteDataset(ConfigurationManager.AppSettings(GlobalD.CfgKeyConnString), CommandType.StoredProcedure, "PG_LST_MENU_BY_SUBJECT")
As I said before my project with the previous version works fine, and this is the only part that is giving me trouble...
thank you
Ok, here's my setup. I've got a named instance in a SQL 2000 cluster. I only have dbo rights on my database, because it is a shared infrastructure. Here's my current web.config connection string (the meat, anyway):
When I'm at the office, this is my connection string, pretty normal:
connectionString="Data Source=ServerNameInstanceName;Initial Catalog=blah..."
But, when I connect through the VPN, I can't just connect through the named instance - I have a specific port. This is where things get odd.
First, if I try to connect through SQL Server Management Studio (2005), i get nothing. If I try to connect using "ServerNameInstanceName, (comma) Port Number" it connects, but not to my instance. I get a seperate set of databases that I believe are in the default instance. So, I changed the comma to a semicolon (;) - and it still connected to the same thing - connected to the database, but to the wrong set of databases. So, on a whim, I tried plunking my string, which was now "ServerNameInstanceName;(semicolon) PortNumber" into the SQL 2000 Tools and it worked in both Query Analyzer and in Enterprise Manager. So, I thought, I'll just slam this into my connection string and all will be well. No. I can't use a semicolon in my connection string, and I can't find an escape character to use. Double semicolons don't work, a comma doesn't connect me properly, double colons don't work, the JDBC brackets don't work {} - so I'm at a loss. I'm out of ideas. I've set up aliases, and those don't work earlier.
I'm using ASP.net 2 with VB & C# and Visual Studio 2005 Professional. Thanks for any help anyone can give on this!
Here is the connect tring from table properties:ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;WSID=VICRAUCH;DATABASE=vgs_prod;TABLE=d bo.USysCandidatesHere is the connect string from the ADO .Open connect string:"ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;UID=sa;PWD=xxxXX99X;WSID=VICRAUCH;DATAB ASE=vgs_prod"Here is the ADO .Open code. Set CNN = New ADODB.ConnectionDim strDEFConn As StringstrDEFConn = FixConnStr(DEFCONN)CNN.Open strDEFConn The last line fails with the CNN.Open strDEFConn with this message:Run-time error '-2147467259 (80004005)';[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This code works when the SQL Server is on it's own server, but for testing at my own office, I have SQL Server on the same machine as the Access application. I'm getting the above error where SQL Server and the Access app are on the same machine. I can open a linked SQL table from the user interface, and VBA code that deals with the tables as Access tables works. It is the ADO .Open statement where the error happens. Thanks for any help you can give me on getting this to work.
View 5 Replies View RelatedHi there, I'm not exactly sure where to post this question, so I'll post it here.
I have 2 Windows XP machines, not part of a network domain. One of the XP machines is running SQL Server 2005 Express edition, lets call this DB machine. The other machine is just running my application - App machine. As part of my application, I want to be able to do a backup of the database.
The DB machine is also running the application. If I log into my application on the DB machine using SQL Server Authentication, and run the backup it works fine. (It's using the T-SQL BACKUP command). If it log into my application on the App machine, and try to do the backup, I'm getting an error saying that "The user is not associated with a trusted SQL connection". The same user is being used in both scenarios, and this user can update the database fine on the App machine, so it's not really a connection problem, it seems a permission problem. The SQL user I have created is a member of the db_backupoperator role for the required database.
Is anyone aware as to why I would be getting this error?
hi
As I trun Work offline - true, my connection manager for log file says-it cant acquire connection while work offline is true.Where as other oledb connections work fine.
Even it tried to get around by putting DelayValidation as true, but didnt work.
Is there is anyother setting that has be set.
Thanks and Regards
Rahul Kumar
Hey guys,
I am pretty new to reporting software and I was just wondering in reporting services 2005 when working with multiple datasets and data connection string in order to populate text boxes if the data is a number it is prefixed with SUM at the start of the expression and if it is text it is prefixed with FIRST even though it is just for one value.
I was wondering if this is normal or have I messed up somewhere?
Many thanks.
I'm using SSDT 2012 to create SMO Connection Manager for transferring server objects. However the connection is not working, it always returns error message something like "server is not found". I tried to connect multiple servers, with both Windows and SQL authentications, none of them works. I found the SMO.dll is already installed in the specific folder on my development machine. What would be the reason of this error?
Edited---Added the error message below. I can connect the server using OLEDB or ADO.NET. So my question is, is there a service, protocol or port .... to get SMO Server ready for responding?
Hello,
I've been developing a web application with a Java backend that connects to a SQL Server database with the JDBC driver 1.1 for a while now. Until now, everything was working fine. Now I had to add Windows authentication to the application.
After reading through the JDBC online help, I added the property
integratedSecurity=true to the connection string and copied the sqljdbc_auth.dll to the windowssystem32 directory of the system with the backend.
Logging in works fine, but the problem is that SQL statements that work on views throw SQLServerException errors, the message is
Invalid object name '(name of the view)'
It doesn't matter if a user is configured to log in via windows authentication or via SQL server authentication.
I need to access those views instead of the real tables because this is part of my security concept, the database creates views for each user based on his role.
Is this a known problem with the JDBC driver or a configuration issue?
Thanks for the help.
Hello everybody,
I have some problems of performance in my machine when i try to work whit a ETL that contains one connection of a excel 2007 file. These file has 3 page and it's 19MB. when i try to edit some data flow, my bids work very slow around 3 or 5 minutes, openning the Data flow source.
My machine configuration is:
Processor: Core2Duo of 1.66Ghz
Ram: 2GB
D.D:80GB
I'm working over a DB engine Sql Server 2005 Developer edition.
So, the excel file has thes load:
Page1: 5 columns X 62000 rows
Page2: 14 columns X 62000 rows
Page3: 12 columns X 123000 rows.
If i work with a file with the same structure but few rows, they work better. How can i correct these situation?.
Thank you!!
JULIAN CASTIBLANCO P.
Bogotà , Colombia.
Hello,
I am wondering how it is going to work using SQL Server configuration type to store connection string in the SQL Server table. How does SSIS know what database to connect to if its connection string is store in the database? Thanks
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
All --
Please help.
I have some questions about connection strings.
BACKGROUND...
Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005.
Note that I do not want to use the "Attach a database file" type of connection string.
Note that I am using the site http://www.ConnectionStrings.com as a reference.
Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.
QUESTIONS...
(A) What exactly does the error in Item 4 mean?
(B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string?
(C) Are there any alternatives?
(D) What do you suggest?
Please advise.
Thank you.
-- Mark Kamoski
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
Hi All,
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
Any help or thoughts greatly appreciated.
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
When using jdbc with IntegratedSecurity, I run into this problem when the machine is not part of a domain & gets its IP address via dhcp. Is this expected behavior or a bug in the jdbc driver.
The SQLServer and client application are installed on the same machine and a local admin is logged in, running the client app.
If I change one of the two parameters mentioned above, the connection can be established leading me to believe this may be intentional for security issues. Am I correct?
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Thanks for your help.
I am accessing SQL2005 with C# code using OleDbConnection.
A try and catch block catches the following error once a while between the Open() and Close() of the connection:
ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.
I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.
Any hint would be greatly appreciated.
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave