How To Pass OLAP Parameters Within A URL?
Nov 27, 2007
Hi there!
My report uses an OLAP query with a (multi-valued) parameter, the generated MDX query contains something like "...ON ROWS FROM ( SELECT ( STRTOSET(@Region, CONSTRAINED) ) ON COLUMNS FROM [cube]) ...".
The report works fine using the Report Manager frontend. Now I want to pass this parameter directly within the query string:
https://servername/ReportServer?/PathTo/MyReport&rs:Command=Render&rs:Format=HTML4.0&Region=[foo].[bar 123].&[baz]
But I cannot get Reporting Services to accept the parameter via URL access (instead of complaining about a missing parameter value). I've already tried quoting/encoding the brackets, spaces, and the ampersand, putting the dimension in curly braces and/or quotes... No success.
Normal (url-encoded) query parameters work fine, I just can't pass OLAP parameters (dimensions like "[foo].[bar 123].&[baz]") this way. I think ReportServer doesn't like the way I'm trying to quote them...
How do I quote dimension parameters correctly?
Thanks and best regards,
Thomas
View 3 Replies
ADVERTISEMENT
May 12, 2008
I am developing a report against OLAP. I have a main report and a sub report. The parameters to both are exactly the same. I am passing parameters to sub report from main. Whenever I use Field!Fieldname.Value as a parameter value to the sub report, I get an error saying one or more parameters required to run the report have not been specified. I used the UniqueName, but that doesnt do my grouping right ( I dont think this works for multi-value report)
I am lost...I need to figure this out ASAP. Does somebody know an article or do you know as how to deal with OLAP reports as sub reports and passing parameters as multi-value? I tried to attach the code, but I ran out of maximum characters...
View 4 Replies
View Related
Jan 21, 2008
I am using a 2005 SSAS cube as a datasource for 2005 SSRS report with multivalue parameters. I use the design mode query builder to generate my MDX. I then add my parameter to my parameter field in the filters section. The name and value of the parameter in the dataset editor is as follows:
Name: FacilityFacilityNumber
Parameter: Parameters!FacilityFacilityNumber.Value
I then proceed to layout mode and then open up report parameters. I then check the multivalue box and select non-queried available values. I choose non-queried radio button because I want my asp page to be passing in the parameters, not a dropdown list.
The problem is that when I try and preview the report and I type in just one parameter I get the following:
"Query (1, 437) The restrictions imposed by the CONTRAINED flag in the STROSET function were violoated"
After looking through a couple of forums I found that adding the following Parameter value in the data tab and dataset editor would help me out a bit:
"[Facility].[Facility Number].&["+Parameters!FacilityFacilityNumber.Value+"]"
Ok so now (in layout mode) I type in one parameter and I get a report back, BUT when I try to type in a second or more parameter I get the same error as before:
"Query (1, 437) The restrictions imposed by the CONTRAINED flag in the STROSET function were violoated"
Here is the MDX query that I am using for this report:
SELECT NON EMPTY { [Measures].[Claim Count], [Measures].[Item Reasons Count], [Measures].[Charged Amount] } ON COLUMNS, NON EMPTY { ([Facility].[Facility Number].[Facility Number].ALLMEMBERS * [Claim Status Codes].[CLaim Status Code].[CLaim Status Code].ALLMEMBERS * [Claim Status Codes].[Claim Status Description].[Claim Status Description].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@FacilityFacilityNumber, CONSTRAINED) ) ON COLUMNS FROM [Claims Remittance]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Please, if anybody know's what I am doing wrong I would greatly appreciate it.......I have to have my report accept non-queried multivalued parameters. Thanks
View 1 Replies
View Related
Dec 1, 2007
hi,
I am new to sql server reporting services. When i pass more than 30 parameters ,my report is showing parameters which is not a desired one even though i am making showparameterPrompts property to false.
can any one tell me how to pass more no of parameters to the Report.
Advance thanks
Srinivas Govada
View 1 Replies
View Related
Dec 1, 2003
MY DBA wrote a trigger, that upon hitting the delete button for a payment,
the payment would be transferred to another table and the trigger would
call a sp as well. since the trigger is calling the sp, I should only supply the parameters.
How do you do that w/o calling the procedure?
View 1 Replies
View Related
Dec 26, 2007
Hi Gurus,
I want to pass 0 value to all subreport parameters in the beginning when main report is run. This is because i dont want subreport query to run.
when user clicks on '+' in main report, i want to pass the parameter values so that the subreport will run with correct parameters for that particular main report row.
My purpose of doing this is to achieve speed with subreport
Thanks a lot in advance.
Respectfuly,
Korr
View 18 Replies
View Related
May 8, 2008
how do u pass parameters to a subreport.... i tried doin it but got an error msg sayin "Sub report cannot be displayed"
any solution????
View 4 Replies
View Related
Mar 27, 2008
I have recently had a few reports that are built around the userid parameter start failing to pass the userid parameter. If I run the report and hard code the userid everything runs just fine, but I am not able to collect the userid when the user is logging into the report server. Any thoughts or suggestions?
R/ AA
View 3 Replies
View Related
Jul 15, 2007
how do i pass the paramenters and storedprocedure to dataview from code-behind?
the below code have sqldatasource control but i want to pass through code-behind everything...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1"
EmptyDataText="There are no data records to display." DataKeyNames="NewsId">
<Columns>
<asp:BoundField DataField="NewsId" HeaderText="NewsId" InsertVisible="False" ReadOnly="True"
SortExpression="NewsId" />
<asp:BoundField DataField="PostDate" HeaderText="PostDate" SortExpression="PostDate" />
<asp:BoundField DataField="PostedBy" HeaderText="PostedBy" SortExpression="PostedBy" />
<asp:BoundField DataField="PostedByName" HeaderText="PostedByName" SortExpression="PostedByName" />
<asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
<asp:BoundField DataField="Body" HeaderText="Body" SortExpression="Body" />
<asp:BoundField DataField="LastUpdated" HeaderText="LastUpdated" SortExpression="LastUpdated" />
<asp:CheckBoxField DataField="IsVisible" HeaderText="IsVisible" SortExpression="IsVisible" />
</Columns>
</asp:GridView> i have storedprocdure which accepts 4 parameters 3 paramenters which user will supply and 1 parameter will be supplied from code-behindwhat i mean by that is:the 4 parameters storedprocedure accepts is:empid, start_date, end_date (user will supply those 3 parameters)internal_id - which internally pass along with other 3 parmeterssomething like this:internal_id, empid, start_date, end_dateany thoughts?thanks.
View 3 Replies
View Related
Aug 11, 2007
How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks
View 2 Replies
View Related
Feb 29, 2008
I’ve got the following piece of ASP code, which updated a
table through the standard edit/update command filed options.
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$
ConnectionStrings:CAT_SYSTEMConnectionString %>"
OldValuesParameterFormatString="original_{0}"
SelectCommand="sp_diplomaViewQualifications"
UpdateCommand="UPDATE
PsnQualifications SET quantity=@quantity WHERE rowstatus=1 and
qualId=@original_qualId"
DeleteCommand="UPDATE
PsnQualifications SET rowStatus=0, lastUpdateOn=getdate(), lastUpdateBy=@createdBy
WHERE rowstatus=1 and qualId=@original_qualId"
SelectCommandType="StoredProcedure">
<UpdateParameters>
<asp:Parameter Name="original_qualId"
/>
<asp:Parameter Name="quantity"
/>
</UpdateParameters>
<DeleteParameters>
<asp:Parameter Name="original_qualId"
/>
<asp:Parameter Name="createdBy" DefaultValue="TEST"/>
</DeleteParameters>
<SelectParameters>
<asp:Parameter Name="masterKey"
/>
</SelectParameters>
</asp:SqlDataSource>
My problem is that I need to pass the contents
of the VB variable ‘createdBy’ into the DeleteParameters option.
This is defined in the code as: Dim createdBy As String = getUserLoginName(Me.Page)
How do I pass this into the update and/or delete part
of the command field on the ASP page?
View 3 Replies
View Related
Apr 23, 2012
I don't know how to pass parameters required (dates) to a query1, if I'm using a subquery (query2) which is using the results of query1, but I'm not showing that field on that subquery (query2)
Example
table1
id - autonumeric
id_user - id from user
dates - date of register
table2
id - user id
name - user name
query1
SELECT Table1.id_user, Count(Table1.id_user) AS CuentaDeid_user
FROM Table1
WHERE (((Table1.datess) Between [begining] And [ending]))
GROUP BY Table1.id_user
ORDER BY Table1.id_user;
subquery (query2)
SELECT query1.id_user, query1.CuentaDeid_user, Table2.name
FROM query1 LEFT JOIN Table2 ON query1.id_user = Table2.id;
This is just an example, the think is that I want to know that if it's possible to pass the parameters requested in query1 from the SQL of the subquery (query2)?
View 3 Replies
View Related
Jun 11, 2008
Hi,
I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions.
EXAMPLE:
TASK#1
TABLE-A :has queries below
select count(*) from employee
select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2
Then I have another SQL task(may be SQL task) which use the value @counts make some decisions
If @count > 1 then pass
If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
View 6 Replies
View Related
Nov 28, 2013
I am trying to use one sql store procedure but don't know how to pass the parameters. I am posting here my store procedure:-
create procedure dynamic_pivot
(
@select varchar(2000),
@PivotCol varchar(100),
@Summaries varchar(100)
) as
declare @pivot varchar(max), @sql varchar(max)
[Code] ....
My table looks like below:
emp_id, time_code, date, time_charged
RB, VAC, 20130222, 8
RB, HOL, 20131128, 8
RB, VAC, 20130311, 8
My output should be:
emp id VAC HOL
RB 16 8
View 5 Replies
View Related
Aug 17, 2007
In a matrix report with column and row groupings, how to pass the parameters to the drill-through report? The column grouping could open up into multiple columns and the same to the row groupings. I have a navigation link to a drill-through report on a total field in the matrix report and the drill-through report is required three parameters, one from the parameter from the matrix report (this one I can map to easily), second parameter is one of the value from the column grouping field and the third parameter is one of the value from the row grouping field. How to select those values from the column/row grouping.
Thanks
View 8 Replies
View Related
Dec 27, 2007
How do you create a link on one report to run another report passing a parameter (or two).
View 4 Replies
View Related
Apr 5, 2007
I defined the following stored Procedure as the datasource
CREATE PROCEDURE p1(@cond String)
AS
BEGIN
SELECT Id,Name from table1 Where @cond
END
@cond is a long sql , for example
Id in (select sunId from table2 where .......)
my question is
how can I pass the parameters( @cond ) to RS2005?
thanks!
View 1 Replies
View Related
Apr 12, 2006
I am using a parameterized select query as displayed below to fetch values from source.
SELECT A.Account_GUID,
M.Merchant_GUID,
H.Household_GUID,
B.BankAU_GUID,
SR.SalesRep_GUID,
E.Entitlement_GUID,
I.Income_GUID,
Exp.Expense_GUID,
SP.Sales_Product_GUID,
P.Product_cd,
SUM(S.Sales) AS Monthly_gross_MC_VI_amt,
SUM(S.Sales) - SUM(S.[Returns]) AS Monthly_net_MC_VI_amt,
SUM(S.SaleTxns) AS Monthly_gross_MC_VI_tran_cnt,
SUM(S.SaleTxns) - SUM(S.ReturnTxns) AS Monthly_net_MC_VI_tran_cnt
FROM Account AS A
LEFT OUTER JOIN dbKAIExtract.dbo.tblSales_STG AS S
ON A.Account_No = S.AccountNo
And S.BucketNo = ? And S.ProductCode in ('01','02')
LEFT OUTER JOIN Merchant AS M
ON A.Account_No = M.Account_no
INNER JOIN SalesRep AS SR
ON SR.Rep_SSN = isnull(A.rep_SSN,'000000000')
INNER JOIN Household AS H
ON A.Account_No = H.Account_no
LEFT OUTER JOIN BankAU AS B
ON A.Assigned_AU = B.AU_No
LEFT OUTER JOIN SalesProduct AS SP
ON A.Account_No = SP.Account_no
And SP.Reporting_Interval_Id = ?
LEFT OUTER JOIN Entitlement AS E
ON E.Account_no = A.Account_No
AND SP.Product_Cd = E.Entitlement_Card_Type
LEFT OUTER JOIN Income AS I
ON I.Account_no = A.Account_No
And I.Reporting_Interval_Id = ?
LEFT OUTER JOIN Expense AS Exp
ON Exp.Account_no = A.Account_No
And EXP.Reporting_Interval_Id = ?
LEFT OUTER JOIN Product AS P
ON P.Product_cd = SP.Product_cd
WHERE (A.current_ind = 1)
AND (SR.current_ind = 1)
GROUP BY A.Account_GUID,
M.Merchant_GUID,
H.Household_GUID,
B.BankAU_GUID,
SR.SalesRep_GUID,
E.Entitlement_GUID,
I.Income_GUID,
Exp.Expense_GUID,
SP.Sales_Product_GUID,
P.Product_cd
My problem is, I am not able to assign any variables to parameterized query. Can any body guide how to assign respective variables to the parameterized query. I have the above query as a part of OLE DB Source step within Data flow task.
Thank you
Jatin
View 11 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some particular summerized count link.
Its a sort of drilled down report. I am not getting how to pass the respected Ids (more than one) to the next report when user clicks on the link in the 1st report. These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from the database.
Please help.
Regards,
Sachin
View 4 Replies
View Related
Aug 27, 2007
I will like to configure the Report or the Report server to pass parameters to Inetrnet Explorer when creating the report.
Is there a way to do that ?
View 1 Replies
View Related
May 8, 2008
Hi,
I'm having Parent package, which has For each loop which returns Val1 , Val2 , Val3 and Val 4
I want to create child package which accepts one parameter and call this package inside For each loop.
Inside loop i want to call 4 child packages(same pakage) simultaneously.
If i create child package which access parent package variable, i will have to modify modify each child package. I cannot reused child package.
How can i create a generic child package ?
Thanks,
Sandeep.
View 6 Replies
View Related
Jun 22, 2006
Hi,
I use the " JUMP to URL" properties and the code as follow:
=SWITCH(Fields!KpiCode.Value=Fields!KpiCode.Value,void(window.open('"+First(Fields!ServerString.Value,
"HostInfo")+"/L3/"+Fields!KpiCode.Value+".aspx','"+First(Fields!PropertyString.Value,
"HostInfo")+"'))")
I want to know is any way or any possible way could pass the report
parameter on this kind of porperties or this code?
For some requirement, I just can use Jump to URL, but hope can pass the
parameters on "jump to url" properties.
Thanks for any advice!
Angi
View 13 Replies
View Related
Nov 13, 2007
Hi all,
I wish to pass parameter from a dropdownlist in my web application to the SSIS package so as to export the user specified table.
Is using package configuration the right way to do this?
Any advice is appreciated!
View 8 Replies
View Related
Feb 19, 2008
I have stored procedure that expects 2 input parameters (@UserID uniqidentifier and @TeamID int). My datasource is SQLDataSource. So i need to pass parameters to SP..When i add parameters ans execute i got an error "....stored procedure expects @TeamId parameter, which was not supplied" But i pass them. How should i pass parameters? Maybe the reason is some mismatching of parametrs. 1 Parameter [] param = new Parameter[2];
2
3 param[0] = new Parameter();
4 param[0].Name = "@TeamID";
5 param[0].Type = TypeCode.Int32;
6 param[0].Direction = ParameterDirection.Input;
7 param[0].DefaultValue = "1";
8
9 param[1] = new Parameter();
10 param[1].Name = "@UserID";
11 param[1].Direction = ParameterDirection.Input;
12 param[1].DefaultValue = "edf26fd8-d7cd-4b32-a18a-fc888cac63ef";
13 param[1].Type = TypeCode.String;
14
15 dataSource = new SqlDataSource();
16 dataSource.ID = "Source";
17 dataSource.ConnectionString = settings.ToString();
18
19 dataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
20 dataSource.DataSourceMode = SqlDataSourceMode.DataReader;
21 dataSource.SelectCommand = "dbo.GetAprfAssessmentTeamData";
22
23
24 dataSource.SelectParameters.Add(param[0]);
25 dataSource.SelectParameters.Add(param[1]);
26
View 4 Replies
View Related
Mar 26, 2008
Hi,
I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample,
CREATE PROCEDURE [dbo].[display_customer]
@agentID varchar(20),
@customer1 varchar(20),
@customer2 varchar(20),
..... -- Here I do know how many customers for each agent
AS
SELECT name, city, state, zip
FROM rep_customer
WHERE agent = @agentID and (name = @customer1 or name = @customer2)
Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure?
Thanks a lot!
View 6 Replies
View Related
Nov 15, 2006
Hello all,
I have a project where I need to automatically pass 2 sets of parameters to a SSRS report and generate PDF files. I have set the defaults for the parameters based on one set of parameters and created a subscription to automatically generate PDF copy. However, I am not sure how to generate the report automatically using the other set of parameters. Also, I don't want to create two report files to accomplish this.
Can you please help?
Thanks in advance,
Saurav
View 1 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 3 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 1 Replies
View Related
Sep 15, 2007
I have developed some Reports using Reporting Services and I want to deploy them for access over the Internet.
These Reports allow the Users to specify parameters, such as Start and End Dates.
I am told that a User Interface has to be developed manually to provide this facility for some kind of security reason.
This seems very bizarre and the reason doesn€™t make much sense.
Is this really true ?
Thanks very much
Barry
View 19 Replies
View Related
Feb 2, 2006
Hi,
Does anyone know if the VisualFoxPro 9.0 OLEDB driver supports parameters? Trying to pass parameterised queries from SSIS results in the error reported below, which implies it does support parameters, but that SSIS is not calling the driver properly somehow.
Regards,
Richard
-----------------------------------------------
Error MsgBox:
TITLE: Microsoft Visual Studio
------------------------------
Parameters cannot be extracted from the SQL command. The provider might not help to parse parameter information from the command. In that case, use the "SQL command from variable" access mode, in which the entire SQL command is stored in a variable.
------------------------------
ADDITIONAL INFORMATION:
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Visual FoxPro)
View 1 Replies
View Related
Jul 18, 2007
I have a DTS package of SQL server 2000 which has two "Execute SQL Task", which gets maximum ID (call it maxID1) from table1 in mysql and maximum ID (call it maxID2) from table 2 in sql server. Those 2 as global variables passes into a data flow which grabs all data from mysql's table1 with its ID > maxID2 and ID <= maxID1 and insert into SQL server table3. This package is working so far.
My question is how to achieve the same thing in SSIS? I created two "Execute SQL Task", which will get maxID1 and maxID2, and one "Data Flow Task". But how to pass those 2 parameters into that "Data Flow Task" without using "Script Task"?
Anyone could help? Thanks!
View 4 Replies
View Related
Apr 30, 2004
HI,
I HAVE WRITTEN A SIMPLE PROCEDURE CALLED AS MY_PROC :-
CREATE PROCEDURE MY_PROC
AS
DECLARE FETCHER CURSOR SCROLL
FOR
SELECT A.INTCUSTOMERID,A.CHREMAIL,B.INTPREFERENCEID
FROM CUSTOMER A
INNER JOIN CUSTOMERPREFERENCE B
ON A.INTCUSTOMERID = B.INTCUSTOMERID
OPEN FETCHER
WHILE @@FETCH_STATUS = 0
FETCH NEXT FROM FETCHER
CLOSE FETCHER
WHICH IS WORKING FINE WHEN I EXECUTE :-
EXEC MY_PROC
BUT I WANT TO PASS BOTH TABLE_NAMES AND COL_NAMES AS PARAMETERS :-
LIKE :-
EXEC MY_PROC [TABLE_NAME],[COL_NAME{1.....n}]
SO THAT I CAN CHANGE BOTH THE TABLE_NAME AND COL_NAME
HOW TO DO THIS ?
tHIS IS ONE MORE PROBLEM THAT I AM FACING.PLS HELP
tHANKS.
View 14 Replies
View Related
Jul 20, 2005
I need to execute xp_cmdshell in a trigger and pass a command lineparameter to the .exe programi.e. I have a .exe program c:program filessavedata.exeIn the trigger I have a parameter @Id bigintI need to pass the parameter @Id to savedata.exeIn the trigger, I am tryingEXEC master..xp_cmdshell 'cmd.exe /C "c:program filessavedata.exe "'+ CAST(@Id as varchar)BUT this does not work.Can someone please help me with how to do this?Thanks,db
View 1 Replies
View Related
