How To Recover My Procedure From SQL Server 7.3
Apr 16, 2002
Hello,
I have some procedure in SQL Server 7.3 they are
working fine. Now my SQL Server is not working that is
it not opening Query Analizer or any other tool
in SQL Server ok.
I have no back of my procedures which are written
in SQL Server any where like in notepad or in some
places.
Now i have a plan to load Sql server again
but i want my old procedures before loading
Sql Server again.
How to do it?
How to restore my procedures?
Where actually SQL Server stores these procedures?
I searched in my system with my procedure name but it
shows nothing with those names.
In my case there is no chance of recovering my old SQL Server
i have load again SQL Server.
So kindly help on this issue asap.
thanks
View 4 Replies
ADVERTISEMENT
Feb 1, 2008
Hi,
By mistake i've damaged my .mdf file and i have no backup on this database . However i have the transaction log intact and an older version of the database .
Is it possible to recover the database using the transaction log? How can it be done?
Thanks to anyone who can help me.
View 3 Replies
View Related
Jan 24, 2004
I can recover all type of ms sql server database losing.please contact me at cn9526@163.net
View 2 Replies
View Related
Feb 5, 2007
Back up can be a successful one when it is recovered, I want to know about the Various recovery scenarios and methods of recovery. any guidance,literature help
Articles on various categories
View 2 Replies
View Related
Jan 30, 2007
While I was out of the office the Lan Team moved one of my SQL Server2000 servers to a new network domain. Since then the maintenance jobhas not ran.The error log for the SQL Agents has the message listed in the subjectline. I have not found any useful articles on the MS SQL Serversite. Anyone know what might be wrong and how to fix it.HTH -- Mark D Powell --
View 4 Replies
View Related
Feb 12, 2008
hi
Can any body provide me any idea that how to recover database data if i have deleted that database
Bye......
View 2 Replies
View Related
Jun 20, 2001
We have a two node cluster running W2K and SQL2000. The agent starts, but we cannot access any of the jobs. It gives us the 14258 Agent is starting, try again later... error message. We know that this is not the case, we have waited several hours without it "starting". The SQL Agent log indicates that the agent is waiting on SQL Server to recover databases, but all of our databases are up. It is almost as if during startup a flag did not get set to indicate that a database was recovered.
Has anyone run across this before? If so, did you ever figure out how to fix it?
View 2 Replies
View Related
Jun 20, 2007
Hi all. A few days ago i installed mcafee total protection 2007 and that disabled my internet connection totally!! I couldn't fix it so i had to uninstall it. After uninstalling mcafee total protection 2007 still i couldn't join Internet!!
So i got mad and went and made repair installation of windows xp pro. After repair installation i couldn't activate it since Internet connection was still not working!! So i went and installed another copy of xp pro on different folder and named it WINDOWS (old one was WINDOWS2).Thanks god now i could join Internet but all my shortcuts and menu items are not visible.
Unfortunately I can't even start sql server 2000 either!! could any one tell me what should i do in order to get access to all database tables and data that i had in sql server and make a back up. I didn't install any new sql server yet. I be happy if an expert tell me what should i do. The installation folder of old windows(WINDOWS2) is still available along with sql server installation folder.Thank and looking forward for reply.
View 2 Replies
View Related
Nov 29, 2006
Dear All,One of our employee made a mistake and deleted something from database.I would like to recover that log file without restoring the backup andthe other log files. The reason I want to do this is our database isgetting real time information I cannot shut down the database. Is thereany way to do this please let me know and help me .Kindly regardsLS
View 2 Replies
View Related
Jun 21, 2007
I have managed to attach a database to my new instance of SQL Server 2005. The database orignally went into suspect mode on SQL Server v8.0. I have managed to get it into emergency mode but cannot see any tables. DBCC CHECKDB etc do not work. I get the error saying to upgrade the database to the newest version.
Any ideas? Thanks in advance!
View 8 Replies
View Related
Mar 4, 2008
If you know how to recover them I will be very pleased whith you.
Thank you.
View 1 Replies
View Related
Dec 22, 2006
Hi,
My database corrupted because when I was running an update query, there is a power failure. After the computer booted, I cannot open the database anymore, it just not responding. Then I stop the sql server service, and tried to rename the .mdf and .ldf. After that it worked normally, but I need the data from the corrupted mdf file, I tried to attach the database but it just hanged. I even tried to attach without the .ldf file but it didn't work either, so I concluded that the problem is with the mdf file.
Is there any way to recover my data ??
Thanks in advance
Regards,
Edwin
View 8 Replies
View Related
Sep 14, 2007
Hello,
Im using the same DB used in northwindoledb example, i need a similar app but in C#, not C++, so i use this DB and make a form for Pocket PC 2003 SE Emulator in Vista (device application) with visual studio 2005, i use a function to recover the image and display in a PictureBox but when this image create a BitMap give me an error "Value does not fall within the expected range.", i seek a lot in internet and don't find a solution, the function is:
public static Image Bytes2Image(byte[] bytes)
{
if (bytes == null) return null;
MemoryStream ms = new MemoryStream(bytes,0,bytes.Length );
Bitmap bm = null;
ms.Read(bytes, 0, bytes.Length);
bm = new Bitmap(ms);
return bm;
}
If someone can help me i will appreciatte
View 2 Replies
View Related
Dec 23, 2003
Hi ,
I got problem in production server at client place(No backup copy & not replicated,it's a SQL SERVER 2000 Enterprise server),by mistake client updated the data without using where condition then updated lakhs of rows (in SQL server autocommited),Now I need to recover this data from LOG file(.ldf).I tried with LOG EXPLORER(Third party tool) Trail version recovered from default database(Northwind,Pubs).But client not willing purchase this S/W for simple cause,How can we recover the data from LOG file.
1.Can we write the Program in C# to read the SQL Server Log and show the past transactions?
2.Is There any Stored procedures exist in SQL Server to read the day transactions in log file and take the backup?
3. How to read Transactions Log file in SQL Server 2000?
It's very Urgent,I am not expert in SQL Server 2000.
Could U Please Help me with possible solutions.
Regards,
Harikrishna.
View 1 Replies
View Related
Feb 20, 1999
I have a situation that I was wondering if anyone has ever ran into before. It has to do with one of my MS SQL servers. The hardware is a ALR/Gateway 9000R with 4 PP200's, 1 Gb RAM, and a RAID 5 with 72 Gb storage. The NIC card is an ATM 155 Mbit card connected directly to our fiber backbone.
I have WinNT 4.0 Server Enterprise Edition loaded with SP4 and MS SQL Server 6.5 Enterprise Edition with SP5 installed.
I have 7 seperate active databases on the server supporting 7 different applications. The server has been on-line for approximately 4 weeks and just recently (last Thursday) it has started to "lock up" every couple of days. By lockup I mean that it starts to reject all requests by all users. No one can connect to the server including myself. The MS SQL error log grows and grows until we reboot the server. The error logs are 100 Mb or larger in size due to rejection errors being repeated over and over again.
There has been no change made to the server since initial installation.
The error in the MS SQL error log that keeps on being repeated is...
"Message 17308: Kernelerror - Lazywriter. Process (process ID number) generated access violation; SQL Server is terminating this process."
We have an incident in with Microsoft but they are not responding fast enough.
I was hoping that someone out there may have had this type of occurrance happen before.
Any suggestions?
Jim
View 1 Replies
View Related
Jun 3, 2015
SQL server. By-mistake I updated values of a column in a database hosted online, is there any way undo the transaction. I didn't created any backup of the database. I read that still it can be recoverd through the .ldf (log file) but unable to access it. Is there anyway to get access of the Log file or is there any way to recover the data.
View 3 Replies
View Related
Jun 18, 2015
I have installed a default installation of a named instance of a 2008 R2 server and I want to restore a server from the main system and application files. I have a bak file for the latest master and model database and the four application databases and transaction log files. If I restore the master database in single - user mode I will get an error when I start-up the SQL service as the other databases are not attached to the SQL instance.
Is it restore databases and then master/model? best way to restore a SQL server environment?
View 10 Replies
View Related
May 24, 2007
One of the database in our SQL Server 2000 environment is in the suspect status. We need to bring it back to the normal status.
The problem occurred because the disk on which the data file and log file for this database were placed ran out of space.
Pls note other databases in the same server are working fine.
Later on more space was made available on this disk. We tried the following options but with no success.
1. Reset the status of database and restarted the SQL Server. After restarting the SQL Server, the database once again was showing the suspect status.
2. Used the same data and log file in another SQL Server and attached with the database in this another SQL Server.
3. Tried dbcc chkdb with repair_allow_data_loss.
Since the database is in suspect status, we are neither able to export the data nor able to back up the database.
Please suggest some options to recover the database from the suspect status. Also it would be great if we can get the commands, scripts to find if the data/log file is corrupt and a way to correct it (even with data loss is fine).
View 9 Replies
View Related
Oct 7, 2015
I know that there was huge tempdb usage and may be the disk was full but SQL server is not suppose to restart in this case.What could be the reason behind this? SQL server restarted and is currently up and running.We are using SQL server 2008 SP3
View 10 Replies
View Related
Sep 23, 2011
My Client Accidently Deleted Somes Rows From Database Now. Now We are Struggling For Almost 2 Days To Get Them Backup. I Even Checked LDF File From Notepad It Have Those Rows But Not Formatted. (Some Similar Text From Some Column Which Got Deleted.)And The Database has no Backup which i Go to Task -> Restore...Server is Running on Sql Server 2008.
View 7 Replies
View Related
Apr 24, 2015
As I know the database should be restored from backup and logs reapplied. That’s the first and generally recommended approach any time a DB is suspect, whether it’s from log or data file corruption.But if I have no backups then we follow below steps ( after Googling I found these steps on most of the websites ):
1.EXEC sp_resetstatus ‘yourDBname’;
2.ALTER DATABASE yourDBname SET EMERGENCY
3.DBCC checkdb(’yourDBname’)
4.ALTER DATABASE yourDBname SET SINGLE_USER WITH ROLLBACK IMMEDIATE
5.DBCC CheckDB (’yourDBname’, REPAIR_ALLOW_DATA_LOSS)
6.ALTER DATABASE yourDBname SET MULTI_USER
Now my question is,
1. If after executing DBCC CHECKDB at 3rd step, it shows inconsistency.Then I will execute SET SINGLE USER WITH ROLLBACK & if after executing DBCC CHECKDB at 3rd step, no errors found. Then what will be the steps?
2. When we execute DBCC CHECKDB (' DBNAME ', REPAIR_ALLOW_DATA_LOSS) how can we recover lost data during process.As far as I know some data will loss and if it will happen then business will get suffered.
3. Why run DBCC CHECKDB() WITH REPAIR_ALLOW_DATA_LOSS if there are no consistency errors in the database?
View 8 Replies
View Related
Aug 15, 2014
I have set the environment set for AutoRecover (for every 3 minutes and Keep information for 7 days under the SSMS 2014 Menu: Tools -> Option ->Environment -> AutoRecover).
I've rebooted the box and restarted the SQL Server service and nothing seems to create the files.
View 4 Replies
View Related
Jun 3, 2015
SQL server, by-mistake I updated values of a column in a database hosted online, is there any way undo the transaction. I didn't created any backup of the database. I read that still it can be recovered through the .ldf (log file) but unable to access it. Is there anyway to get access of the Log file or is there any way to recover the data.
View 1 Replies
View Related
Apr 17, 2015
I need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, I assume this would just overwrite which is obviously the worst thing that can happen. if i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
View 9 Replies
View Related
Feb 2, 2007
Is there a way to recover the database without defining a device to restore from?
Restore Database TestDB With Recovery
MTmace
View 4 Replies
View Related
Feb 1, 2008
Hi,
By mistake i've damaged my .mdf file and i have no backup on this database . However i have the transaction log intact and an older version of the database .
Is it possible to recover the database using the transaction log? How can it be done?
I do not have the transaction log backup, just the .ldf file.
Thanks to anyone who can help me.
View 6 Replies
View Related
Feb 27, 2000
How do I begin? I had previously installed the SQL Server 7.0 with NT Authentication and everything was fine until I Rename domain Name and Computer name. I decided to uninstall SQL Server, and then reinstall it.
From this action unable to see my database in enterprise manager. I Rename old domain and computer name again. and reinstall with Upgrade Version. but still same effect. Can anyone help? What do I need to do to get my database to work again? Any input on this will be appreciated. Thanks in advance.
View 1 Replies
View Related
Aug 25, 2004
I had MS SQL installed on my comp.I had to reformat my hard drive due to some problems.There was a db in the sql server which i needed.So i saved the .mdf & .sdf files.Then i installed sql server in the formatted hard drive & pasted the .mdf & .ldf files in the Data forlder in MSSQL folder.But the problem is that even after doing this the enterprise manager doesnt show that database.Can anyone help me with this?Is there any way to recover the database?
Thanks a lot
P.S.- I also have whole of the earlier MSSQL folder present in the earlier program files backed up.Would that help in anyway.
View 3 Replies
View Related
Aug 5, 2004
Hello, everyone:
A guy think that the DTS packages can be recoved by restore MSDB database. Is that true? Does anyone have experience on that? Thanks.
ZYT
View 2 Replies
View Related
Nov 23, 2004
Hi
I've had a powerfailure, that resulted in I had to scratch my DB server, I've managed to get all the .mdf and .ldf files from the server. On the new server I get a "Error 823: I/O error (torn page)" when I'm trying to attach the .mdf file to the New server.
Both the new and the old server is a win2003 with SQL 2000 SP3
Is there anybody who knows how I can recover the DB?
/Rune
View 1 Replies
View Related
Oct 6, 2005
Hello,
Is it possible to restore a SQL 2000 database with data from a transaction log?
I am not sure what happened to my database, all the data in the tables is gone. I generated a db script to create a duplicate database. I saved the .sql file on my local machine, separate from the db server, renamed the database name in the .sql file to a new database. Tested script in query analyzer for syntax, all was fine. Running it at this point would have created a new database with a different name, right?
Now my original database is empty. Can someone please provide me with information on getting my data back. Is there a way of using the transaction log to recover the data.
Thanks
View 2 Replies
View Related
Jan 30, 2004
I have changed the roles of primary and secondary servers due to server failure.
Can anyone advise how to revert back to previous main server? Are these any links available?
View 2 Replies
View Related
May 3, 2004
Hi
I need help to recover database from its MDF & ldf files as my server crahsed today .
BTW i installed afresh copy of MS SQL 7.0
I need to be able to restore the database. Pls reply if
you can help. It would be greatly appreciated.
:( :confused:
View 1 Replies
View Related
