How To Refresh A Data Source View And Autogenerate/Re-Deploy The Corresponding Report Model
Jan 9, 2007
Hi everyone!,
Our team is new to SSRS and we are trying to figure out how to refresh the data source view, autogenerate the corressponding report model and Re-Deploy the Report Model (rewrite existing Report Model) on the server on a periodoc basis or trigger the whole action whenever there is a change in the database on some specific tables.
We prefer to do this action through a Agent job ( a diff approach is also welcome).
Are there any stored procs out there?
Appreciate your time.
-PN
View 6 Replies
ADVERTISEMENT
Jul 6, 2007
We've built an oltp that uses nothing but synonyms that reach out to various DB's in the organization thru linked servers.
The issue that we are having is Data Source Views can only see tables and views. Is it possible to use synonyms? If not what would be a work around.
Please advise. Thanks
Steve
View 1 Replies
View Related
Feb 22, 2007
I have an existing project with the data source and report folder with working reports. I need to create a model for other department members to use Report Builder, not Business Intelligence Developer Studio, to develop their reports from. How do I add a data source view and report model folder to the project so I can then create a view and model?
View 1 Replies
View Related
May 23, 2007
I have a datasource view DSV1. It points to a datasource DS1 that is considered the "primary".
I have created a Report Model that uses DSV1 (and thus uses DS1)
I created a new datasource, DS2 that I would like to use instead of DS1. (I can't just modify DS1 because if I modify it, it will overwrite it when we go to our Production environment and break that datasource)
So, I can go into DSV1 and change all the references from DS1 to DS2.
But that's where the problem lies.
When I try to build, I get the following error:
"The Table property of the Entity "E1" refers to the Table "dbo_View", which is not in the primary data source."
Somehow, the entity is tied to the "primary" datasource. When I change it back to DS1, everything works fine. Any thoughts? What can I do?
View 1 Replies
View Related
Jan 17, 2008
Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
View 1 Replies
View Related
Jan 22, 2008
I created a data model for report builder. And since it wont let me use views, i tried to put all the tables im using in one of my already made views, to create a data source view like my sql view. But when i connect everything the same, my report model still doesnt narrow my search. I only want to see Breed information, but since i have a Breeder table,and Customer table, its showing me all customers, and not limiting it to the ones that are breeder customers.
heres the tables:
Code Snippet
FROM dbo.Tbl_Customer INNER JOIN
dbo.Tbl_Customer_Breeder ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Breeder.Customer_Code INNER JOIN
dbo.Tbl_Customer_Detail ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Detail.Customer_Code INNER JOIN
dbo.Tbl_Customer_Category ON dbo.Tbl_Customer.Customer_Category_Id = dbo.Tbl_Customer_Category.Customer_Category_Id INNER JOIN
dbo.Tbl_Customer_Classification ON
dbo.Tbl_Customer.Customer_Classification_Id = dbo.Tbl_Customer_Classification.Customer_Classification_Id INNER JOIN
dbo.Tbl_Customer_In_Breed ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_In_Breed.Customer_Code INNER JOIN
dbo.Tbl_Breed ON dbo.Tbl_Customer_In_Breed.Breed_Id = dbo.Tbl_Breed.Breed_Id
What am i doing wrong, and are there any suggestions.
View 6 Replies
View Related
Oct 12, 2015
how to trigger report's refresh following its underlying SSAS cubes process?
I want to keep reports data updated at all times, especially when this happens while user is already browsing the report..
I don't want to set an auto refresh for the report every 5 minutes as my cube is processed only one time during the day...
View 8 Replies
View Related
Jan 29, 2007
Hi,
I've used the Dec CTP of SQL 2005 SP2 to create a Report Server Project.
In this project, I can create an XML datasource and successfully use that datasource in a report published on Sharepoint using the new Sharepoint AddIn.
I've also used Dec CTP of SQL 2005 SP2 to create a Report Model Project.
In this project I can create SQL Data Sources, DataSource Views andReport Models which I deploy to sharepoint and create a report builder based report from.
What I can't do is create an XML based datasource in a Report Model Project. Also, if I create one solution containing both types of project, the Report Model Project Data Source Wizard suggests I can create a data source based on an existing data source in my solution. What I find is that my XML data source from the Report Server Project is not listed. In fact even if I create a SQL data source in the Report Server Project that isn't available either.
Please let me know what should work now/RTM.
Thanks
Martin
View 2 Replies
View Related
Dec 20, 2006
I've been doing research on the web trying to find if it's possible to create a Report Model that is based on a Data Source that is NOT SQL Server and NOT SSAS.
Specifically I'd like to be able to build a Report Model on a Web Server (or multiple web services).
Does anyone have any information relating to this? Based on my research it looks like there's a few interfaces that need to be implemented (such as ISemanticModelGenerator, etc.).
I did find a post relating to using ODBC data sources for a Report Model and the recommended solution was Linked Tables in SQL Server or UDM in SSAS. Both cases don't look feasible for a Web Service-based Data Source.
Thanks,
Jeremy Wiebe
View 5 Replies
View Related
Jan 22, 2007
Is it possible to dynamically refresh the report model of the report builder?
could it even be using code with any of the interfaces?
When we add a table or add a column to the table in database , will the report model get refreshed automatically or do we need to do it externally. If so, can we use any of the objects and write a custom code in VB.
View 1 Replies
View Related
Jan 22, 2008
What permissions do I need on my SSRS server to deploy from VS2005. Currently I get the following error when I try to deply:
The permissions granted to user 'ReportServerNameUser' are insufficient for performing this operation.
I figure it is something simple that I am missing.
Thanks in advance!
Ustes
View 1 Replies
View Related
Feb 13, 2008
I have a report model that I am trying to deploy using report manager web service. A folder is created by the administrator to place all my SSRS reports. I deployed .rdl files using the "Upload file" function in "Report Manager". All the SSRS reports work fine but when I tried to upload .smdl file (report model file) using the Report Manager's "Upload file" function it gave me the following error message.
The permissions granted to user 'xxxxxxman' are insufficient for performing this operation. (rsAccessDenied)
Does this mean I only have permission to upload .rdl file but NOT .smdl file to my designated folder?
View 6 Replies
View Related
Apr 30, 2007
How does the report model know what data source view to use? I could not find it defined anywhere in the .smdl file.
My problem is this. I have a Report Model project with two data sources, two data source views and multiple report models. When I try and bind a data source to an entity in the report model I do not get to choose which data source view to use to choose what table/view I want to bind the entity too and only the tables in one of my DSV's shows up. When I first created it, it worked fine. It automatically selected the correct view and table and was successfully created but now when I open the project, that correlation is lost.
Any suggestions or help is appreciated, thanks.
View 1 Replies
View Related
May 12, 2008
An user member of users,what's the sufficient privileges?
View 2 Replies
View Related
Oct 19, 2007
Hi,
I'm trying to deploy a Report Model to my local machine that contains an ODBC connection to an iSeries Access ODBC Driver. The system DSN is already setup on my PC, named exactly the same. The data set views and report models create and build succesfully but when I try to deploy using BIDS I get an error description "System.Data.Odbc" for the dataset file and the model.
I can't really see anything substantial in the log files, although not sure what one I should be looking in.
Any help gratefully received
Paul
View 1 Replies
View Related
Sep 14, 2007
Hi,
When i try to deploy a Datasource which is using a report server model, i dont see the Deploy
Option Enabled. It is disabled for Report Server Model.
My connection string is server=http://localhost/reportserver;datasource=/i2i Report Model/SCM Data Warehouse Model
Can anyone point me to the issue here ?
Thankyou
Vidya
View 1 Replies
View Related
Aug 1, 2007
in my report model project, i'm able to successfully create and deploy a report model based on a data source view that is in turn based on a table object in my data store.
but if i try to create a report model that's based on a a data source view that is in turn based on a view in my data store, well then, the report model that gets created comes up blank - i.e. shows no objects.
What gives? Is it not possible to create a report based on a view? that can't be right!
View 6 Replies
View Related
Dec 13, 2007
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
View 13 Replies
View Related
Feb 2, 2008
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
View 1 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
Mar 12, 2007
I have a stored procedure that takes a date range and returns all the sales in that date range. I'm trying to create the report model for ad-hoc reporting. When I go to create the dataset view, it only lets me select tables or views.... how do I get around this?
View 2 Replies
View Related
Oct 12, 2015
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies
View Related
Mar 20, 2008
When I attempt to generate a datasource model I get the following error messages:
------------------------------------------------
More than one item in the Entity 'Customer' has the
name 'Customer Merge Custs'. Item names must be unique
among immediate siblings. (DuplicateItemName)
More than one Field in the Entity 'Customer' has the
name 'Customer Merge Custs'. Field names must be
unique within an Entity. (DuplicateFieldName)
More than one item in the Entity 'Pricing Service Layout
Detail' has the name 'Pricing Service
Extensions'. Item names must be unique among immediate
siblings. (DuplicateItemName)
More than one Field in the Entity 'Pricing Service Layout
Detail' has the name 'Pricing Service
Extensions'. Field names must be unique within an Entity.
(DuplicateFieldName)
---------------------------------------------------
Examining any of the above tables in SQL Server Management Studio does not reveal any duplicate column names. In fact, 'Customer_Merge_Custs' does not appear to be a column in 'Customer' nor does 'Pricing_Service_Extensions' appear in 'Pricing_Service_Layout_Detail'.
As an experiment, deleting the table 'Pricing_Service_Extensions' and regenerating did make the two associated messages go away.
Steve P.
View 3 Replies
View Related
Feb 25, 2014
I have an Excel 2013 file with lots of DAX connected to an Azure database. I'd like to reuse all that work by changing the data source for the PowerPivot model to a different database which is an exact copy (just empty) on the same server, but Excel won't let me. In PowerPivot I can change the database connection, the user ID and password as well as the connections name. When opening each table properties (inside PowerPivot model) the new connection is used and all old data is removed, but as soon as I refresh using Existing connections, both from PowerPivot or from the Excel Data tab, the old connection is used and old data is reloaded.
If I use Existing connections from inside PowerPivot, I can se that the new connection is highlighted and has the correct variable, but I think maybe that one is run first, then the old one is run afterwards (or something like that).
On the Excel Data tab, I can see that the old connection is the only one Excel itself seems to know about, but I cannot change anything there as it's read-only.
There must be a way to change this. Even with copy and paste it would take me days to recreate this Excel file from scratch and it would be a serious flaw and reduction of usability for PowerPivot.
View 10 Replies
View Related
May 8, 2007
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
View 1 Replies
View Related
Feb 21, 2007
Hello,
Our company is doing some basic research into using analysis services as a solution for our customers. I've taken our database and built an analysis services project in BI Studio and deployed it to Analysis Services on my local machine I connect to Reporting Services in Management Studio, create a folder for the cube, give my Windows user acct. Content Manager permission, create the Data Source (conn string = "Provider=SQLNCLI.1;Data Source=(local)SQLServer2k5;Integrated Security=SSPI;Initial Catalog=STI-PDB" -- copied from the Analysis Services project in BI Studio), and go to "Generate Model". What I get is an rsModelGenerationError, sub [Create Perspective From Cubes] with a connection issue at the base:
Either the user, <computername>Thomas, does not have access to the STI-PDB Database, or the database does not exist. () (Microsoft SQL Server 2005 Analysis Services)
Now, in the Database Engine, my Windows account has the db_owner database role for STI-PDB and it's default schema is dbo, which all the objects are created under. What am I missing here?
View 4 Replies
View Related
Nov 16, 2006
Hi all,
I am new to SQL Server 2005 Analysis Services and would like to use the OLAP Cubes as a datasource to build Mining Model . However i would like to use a particular view of the OLAP cube that i have generated to be used as the datasource for the mining model . I find that i am not able to save the Cube View while browsing the OLAP cube in Business Intelligence Studio. Is there a way i can acheive this requirement.
Any ideas regarding this will be really appreciated.
Thanks & Regards,
Satya
View 6 Replies
View Related
Dec 5, 2005
Running 2005 Beta 3 Refresh. When I first deploy, it works fine. Subsequent deployments yield the following error:
View 9 Replies
View Related
May 28, 2015
I am using excel 2010 and SQL server as a data source. When I create a report with the User name "demo_user" which has db_writer access, and mail it to the colleague , he could not refresh the data with the "demo_user" credentials and apparently its throwing user name or password invalid. The one who created only could be able to refresh the data.
What should I do If other people want to refresh the data? How could I fix this issue? We are using SQL server 2012 and excel 2010 powerpivot.Â
View 2 Replies
View Related
Feb 22, 2007
I have been generating report models for users to use with Report Builder and there is no data when they select the model. I noticed that the tables I chose did not have a primary key and when I chose a different table, with a primary key, and generated a model from it, then there was data for the user to use in Report Builder.
Is there a documented work around or will I need to set a primary key on each table?
View 3 Replies
View Related
Sep 24, 2007
I am trying to applying an data filter that will filter out user based on userid
Three tables:
tblPerson (fact table): contains over 1 million records with about 20 fields. One of the fields is called BureauID (int). BureauID indicates what Bureau the person works in for an given record.
tblBureau (attribute table) which has a FK relationship to tblPerson) contains the following fields:
BureauID int - this is the linked field to tbl person
Bureau Code varchar
Bureau ShortName varchar
The reason we use tblBureau as in attribute table instead of place the bureau code and short name directly into table Person is so that we index tbl person quickly with "ints".
tblDataAccess, which has two fields loginID with bureau Code. The bureau code in this table tells me what bureau that userid has access to.
How do i get the report model to filter based on this userid????. I know i have to add some data filters but i am not sure where.
I put an filter on DataAccess so that login = getuserid().
But what do i do to table person or table bureau, so that a person can only see the people in there bureau.
Thanks for you help
Ryan Swann
View 5 Replies
View Related
Feb 1, 2008
Hi,
I created a report model using reporting services, deployed the model locally and then built a report based on that model. The report works fine, but any data updates don't show up, seems like data is cached. I bounced reporting services, cleared cached tables in ReportServerTempDB but of no use. Has anybody faced this problem? How can I get updated data for reports built through a report model. Any help is appreciated.
Thanks,
Sri
View 4 Replies
View Related
Oct 22, 2015
Our SSAS database has been deployed and we are currently working on our mining models.
Are we able to deploy these mining models individually using scripts and have them included in the already deployed database?
View 3 Replies
View Related
