How To Select All Articles Form A Category Without An Article That Is Selected?
Jun 7, 2004Hello,
i want to Select all articles form a category without an article that is selected.
Thanx a lot !
Hello,
i want to Select all articles form a category without an article that is selected.
Thanx a lot !
Greetings,I have one table, named Article, and one table name Category.The problem is, one Article could be in just one or in several categories.What is the best way to connect data between Article and Category according to fast search performance?I have several ideas:1. To have third cross table Article_Category with fields Article_ID and Category_ID, and search Article_Category table 2. To have several INTEGER columns in Article table (like Category_ID1, Category_ID2,..) and search those columns3. Add one VARCHAR field in Article table where I could write Category ID's delimited by some character (e.g. by comma), and do text search in only that column.What is recommended for solving problems like this?
View 7 Replies View Related
I have setup Transactional replication in SQL 2005 between two servers and have about 200 tables being replicated. The problem is that every time, I add or drop a table to replication, and start the Snapshot agent, it re-initializes every article and re-loads every article. This process takes 1 hour to complete and CPU usage goes to 100% during that time.
This behaviour seems very different from SQL 2000 where I would start Snapshot agent and only the relevant tables were added/dropped.
Has that functionality changed from 2000 to 2005? Am I not doing something right?
Thanks,
Amir
Using SSRS 2008 r2...I have a report with a single-value parameter and three multi-value parameters, Class1, Name2 and Name3. I'm hoping for an explanation to one thing that I'm seeing and information on a second thing.
Class1 and Name2 both have the (Select All) parameter selected but Class1 is displaying the concatenated parameter variable list whereas Name2 is showing Null. Why is that? If anything, how can I get Class1 to be similar to Name2 and show Null?But my desired wish is to have Class1, Name2 and Name3 display the text"All Selected" when the parameter (Select All) is chosen.
Hi everyone -
I am building from the Time Tracker Start Kit, trying to get a better feel for how MS thinks we should do things.
In my editing, I have built a new Stored Procedure, trying to pull the newest entries for a specified person.
I have the following that will return all entries for a specific person, sorted by date, newest first:
SELECT
EntryLogID, TT_EntryLog.Description, Duration, EntryDate, TT_EntryLog.ProjectID AS ProjectID,
TT_EntryLog.CategoryID AS CategoryID, TT_Categories.Abbreviation AS CategoryName, TT_Projects.Name AS ProjectName,
ManagerUserID, TT_Categories.Abbreviation AS CatShortName
FROM
TT_EntryLog
INNER JOIN
TT_Categories
ON
TT_EntryLog.CategoryID = TT_Categories.CategoryID
INNER JOIN
TT_Projects
ON
TT_EntryLog.ProjectID = TT_Projects.ProjectID
WHERE
UserID = @UserID
ORDER BY
EntryDate Desc
This will return something like:
EntryLogId Description Duration EntryDate ProjectID CategoryID CategoryName ProjectName ManagerUserID CatShortName
14Can type date in date... .00 2004-02-04 10:28:00116Pros ITS Project Management App 3 Pros
12Changed "Entry Date"... .00 2004-02-03 13:28:00116Pros ITS Project Management App 3 Pros
13Added default button ... .00 2004-02-03 00:00:00116Pros ITS Project Management App 3 Pros
11Removed hours per p... .00 2004-02-03 00:00:00116Pros ITS Project Management App 3 Pros
6Isn't this cool .00 2004-02-02 00:00:00229Pros Knowledge Base 3 Pros
9Added week-by-week... .00 2004-02-02 00:00:00116Pros ITS Project Management App 3 Pros
10Fixed Update comma... .00 2004-02-02 00:00:00116Pros ITS Project Management App 3 Pros
1Built initial framewor... 6.00 2004-01-30 00:00:00116Pros ITS Project Management App 3 Pros
5Adding up to 8 hours... 2.00 2004-01-30 00:00:00229Pros Knowledge Base 3 Pros
3Debugged - fixed a f... 1.00 2004-01-23 00:00:00229Pros Knowledge Base 3 Pros
What I would like to accomplish is to return only the newest entry for each ProjectID (so in the above example, there would only be 2 entries, EntryID 14 and 6)
Any ideas?
Thanks in advance-
Hello,
I am trying to select the last entry (by date) for each category in a table.
For example, if my table had the following fields;
id, category, product, datePosted,....
...how would I select the last product for each category posted by date?
Any guidance is appreciated.
Thanks,
AC
Probably a simple solution, but can't find it my brain right now!
I got 3 table below
Region
---------------
RegionID
ParentID
RegionName
Cuisine
--------
CuisineID
CuisineName
Restaurant
-----------
RetaurantID
CuisineID
RegionID
Data
RegionID RegionName ParentID
1 RN_1 Null
2 RN_2 Null
3 RN_1_1 1
4 RN_1_2 1
5 RN_2_1 2
CuisineID CuisineName
1 CU1
2 CU2
RestaurantID CuisineID RegionID
1 1 4
2 1 2
3 2 5
4 1 3
What I would like is to write a stored procedure to browse the restaurant by either regionname or cuisinename.
I tried to create the view from those three table and create the stored procedure to search from the view based on criterias
I tried to search for regionName = RN_1 & CuisineName = 2 the result is empty. It is true because there is no restaurant under that region however what I want to have is list all restaurants under that RegionName children e.g
RN_1 has RN_1_1 & RN_1_2 & RN_1_3 so the result should be displayed as
RestaurantID CuisineID RegionName ParentID
1 1 RN_1_2 1
4 2 RN_1_1 1
Could anyone help me to do so. Thank you
Dear Friends,
Hi I am having a problem while showing Products from SQL
Server database. Exactly I have a table named Products which has some Products
posted by admin I want to show some latest Products on my default page
based on DateTime which are displayed like show last week articles,show last two weeks articles etc on button click I written my SQL query like: searchquery = "select * from Prducts where Date between '" + System.DateTime.Now.AddDays(-7).ToShortDateString() + "' and '" + System.DateTime.Now.AddDays(-1).AddHours(23).AddMinutes(59).AddSeconds(29).ToShortDateString() + "'"; If any body knows plz help me
Note:Codes
with in [] are optional u need not to read
I
am getting Incorrect syntax near '@Name'.
[
Dim strSQL As String
Dim
param As New
SqlParameter
Dim
AdaCategory As New
SqlDataAdapter
Dim cmd as New SqlCommand()
]
strSQL = " SELECT CategoryID FROM Category WHERE Name
like %@Name%"
I
am getting Incorrect syntax near '@Name'.
I
also tried
strSQL = " SELECT CategoryID FROM Category WHERE Name
like %’@Name’%"
still Error :(
[ cmd.CommandText = strSQL
param =
cmd.Parameters.Add("@Name",
SqlDbType.NVarChar)
param.Value = catId
cmd.CommandText = strSQL
AdaCategory.SelectCommand = cmd
AdaCategory.Fill(DTable)
]
Help me please……….
Hi,
I have a simple table:
Categories
----------
CategoryID
ParentID
Name
I want to associate my Products to a category so that I can search by category....ok. If I just have a simlpe table:
CategoryProducts
-------------------
CategoryId
ProductId
I can link a product to a category. Now, if I just link a product to a single category, such as the bottom leaf category:
Self Help / Personal Development / Spiritual / Meditation
I would link a product to the Meditation category. However if I
click on Self Help while browsing, I want to see all items underneath
Personal Development, Spiritual and Meditiation. So my question
is is this a good way to store the product-category relationships, or
should I put many entries into CategoryProducts to keep the queries
simlpe and faster? Are they faster doing it this way? In this way there
would be 4 entries for a product in meditation. My personal idea
is that adding all entries up a tree arm of a category path will be
cumbersome to manage, but it does solve the problem of clicking on Self
Help and seeing all products that exist within sub-categories. I
am sure an SQL query would be able to work this out, but I dont know if
performance would be something to consider on an ecommerce site? Are
there any patterns fo rthis stuff - seems a reasonably repeatable
pattern for business sites?
Thanks,
jr.
hiiiiiiiiii plz help me........urgent
my table is as follows
CREATE TABLE [dbo].[tbl_photo_gallery](
[image_id_int] [int] IDENTITY(1,1) NOT NULL,
[image_caption_vchr] [varchar](100) NULL,
[image_path_vchr] [varchar](200) NOT NULL,
[photo_cat_id_int] [int] NOT NULL,
[posted_by_vchr] [varchar](45) NOT NULL,
CONSTRAINT [PK_tbl_photo_gallary_1] PRIMARY KEY CLUSTERED
(
[image_id_int] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]) ON [PRIMARY]
now i wanna to get a randomly selected image_path_vchr(image path) from each photo_cat_id_int(category)
i m doing this:
select TOP (1) image_path_vchr from tbl_photo_gallery where photo_cat_id_int=1 ORDER BY NEWID()
to get random image_path_vchr from category 1....only single category.
but i wanna to use a simple query to get random image_path_vchr from each category without using any temporary table.....
plzzzzzzzz help me out......... thanks in advance
Hi,
I have a table with 3 columns - userID, score, dateCompleted
From this table I wish to select the highest score for each userID and the date for that score. If there is more than one row with the same userID and score (i.e. the user got the same score twice), I want to select the earliest date.
To clarify, there are multiple rows which have the same userID, and may have the same score too, but I want to pull out just 1 score for each userID.
I could do this quite easily if the DISTINCT operator worked on a per column basis, but it works on the entire row instead. Is there a way to SELECT DISTINCT column, but still output other columns in those rows?
I hope this is clear, but please let me know if I've confused you.
i have the table name is "Books". its contains 10 Rows.... I want select 5,6 rows,or 7,8 not first and last..... Any tell me the Query for that...
Regards,
S.sajan
Hello everyone,
I have a little problem here. I need to select data from multiple columns and multiple tables, some of those columns can have NULL value. I have tried few things, and havent find the right way so far. Problem that i am incountering is that when i run SELECT statment as it is right now, i dont get back results which match search parameters but have NULL value in one or more column in select statment. How can i fix this problem?
SELECT Person2role.person2roleID,Person.firstname, Person.lastname, Person.sex
FROM Person LEFT OUTER JOIN
Person2Role ON Person.personID = Person2Role.personID
WHERE (Person.firstname LIKE '%' + ISNULL(@firstname + '%', ''))
AND (Person.lastname LIKE '%' + ISNULL(@lastname + '%', ''))
AND (Person.sex = ISNULL(@sex, Person.sex))
This is a part of SELECT statment..just so you can get the idea of what i am doing..i have few more parameters
I am working with SQL Server 2005 Express Version
Thank you,
Alex
My parameter pass the id of the parameter to my query while its name is displyed on the parameter combo.
I have a report on which there is a text field.
1,On this field i want's to display the name of the parameter.
If select all check box is check i want's to show Report of AllFieldName.
other wise it should be comma separate like Report of aa,cc.
e.g
I have field myfield with fieldname aa,bb,cc dd value with fieldid as 1,2,3,4
I am passing this parameter in the query like
select ... where id in( @fieldid)
2,I am exporting this report in a excel format.
How can i pass the parameter in the query string ,submit it.
{How to check select all parameter or particular parameter e.t.c }
I am working in .net 2.0.
How can I check if "(Select All)" option was selected in multi-value parameter?
Thanks in advance!
Hi All
I have a report which has a multi-value parameter. Problem is, it can contain up to 100 options.Is there a way to limit the number of options that is passed to the SQL statement?. EG list has 100 options, user selects 10 but only the first 4 selected options are passed to the SQL statement.
Many Thanks
Delli
I have created a Transactional Replication Publication on my SQL 2012 server.When I log into another server on the domain running 2008R2 and try to subscribe to the 2012 Publication, I get the following error when clicking on "Add SQL Server Subscriber": "The selected Subscriber does not satisfy the minimum version compatibility level of the selected publication"
The 2012 DB is set as 2008 Compatibility Mode?Am I not able to Publish from 2012 to 2008?.I was using SSMS 2008 to connect to my 2012 Instance, thats why it didn't work...
I need to randomly order the selected rows from my table. Is this better to do on the Application level or in a stored procedure using "orderby NewID()"?
Which is faster? There will be about 100 rows returned with 10 columns.
Hello. I a SP with 2 select statements. If the first returns no results it does the second select. This works fine if I test it on the sql server. But when I try it in a webform using a sqldatasource it only returns a result if the first Select returns rows. If not It is an empty set (where I know it should not be. It returned resultrs on the SQL server). This is the code:1 ALTER PROCEDURE [SPName]
2
3 @SearchFor varchar(150) -- search string to compare with
4
5 AS
6
7 SELECT p.UserName,
8
9 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
10
11 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount
12
13 FROM Profiles p WHERE UserName = @SearchFor
14
15 IF (@@ROWCOUNT = 0)
16
17 Begin
18
19 SELECT p.UserName,
20
21 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
22
23 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount,
24
25 DIFFERENCE(p.UserName, @SearchFor) as Similarity
26
27 FROM profiles p WHERE SOUNDEX(p.UserName) = SOUNDEX( @SearchFor )
28
29 ORDER BY Similarity
30
31 END
32
33 RETURN
Now If i change the SP to test it to the code below, it does work in both the webform and on the sql server: 1 ALTER PROCEDURE [SPName]
2
3 @SearchFor varchar(150) -- search string to compare with
4
5 AS
6
7 DECLARE @RowCount int
8 SET @RowCount = 0
9
10 IF (@ROWCOUNT = 0)
11
12 Begin
13
14 SELECT p.UserName,
15
16 (Select ImageName from ProfileImages Where IsMainImage = 1 And ProfileID = p.ProfileID) as ImageName,
17
18 (SELECT COUNT(*) FROM auditions WHERE UserID = p.ProfileID) AS AuditionCount,
19
20 DIFFERENCE(p.UserName, @SearchFor) as Similarity
21
22 FROM profiles p WHERE SOUNDEX(p.UserName) = SOUNDEX( @SearchFor )
23
24 ORDER BY Similarity
25
26 END
27
28 RETURNOnce again, Everything works as it should (for both versions), if I am testing it directly on the SQL server. Can anyone Help me on this? I am stumped and cannot find any answers about this.
Hello,
I've a query wich with I select buildings form a table.
I've a second table with a few building I don't want in my select (exclude form select).
How can I make this?
Thx a lot.
Dom
PS: I'm a sql newbie...
Can someone point me in the right direction or show me a sample that may assist me in the following.
Thanks,
-dw
I need to select some data from 1 table and insert it into another using a stored procedure.
I also would like to select data from table 1 and insert a new record into table 1 modifying a field with new data passed by parameter.
Is it something like:
parameters passed = @selectJobNumber, @newJobNumber
declare @DeliveryMethodIDint
SELECT
@DeliveryMethodID=DeliveryMethodID,
... etc - more fields
FROM
jobDeliveryAddress
WHERE
(JobNumber= @selectJobNumber)
INSERT INTO [jobDeliveryAddress]
(
[JobNumber],
[DeliveryMethodID],
... etc - more fields
)
VALUES
(
@newJobNumber,
@DeliveryMethodID,
... etc
)
Can someone point me in the right direction or show me a sample that may assist me in the following.
Thanks,
-dw
I need to select some data from 1 table and insert it into another using a stored procedure.
I also would like to select data from table 1 and insert a new record into table 1 modifying a field with new data passed by parameter.
Is it something like:
parameters passed = @selectJobNumber, @newJobNumber
declare @DeliveryMethodIDint
SELECT
@DeliveryMethodID=DeliveryMethodID,
... etc - more fields
FROM
jobDeliveryAddress
WHERE
(JobNumber= @selectJobNumber)
INSERT INTO [jobDeliveryAddress]
(
[JobNumber],
[DeliveryMethodID],
... etc - more fields
)
VALUES
(
@newJobNumber,
@DeliveryMethodID,
... etc
)
Hi
Will somebody please explain how to combine asp.net dropdown lists to write
a SQL database select query. I am using VWdeveloper and C Sharp.
For example, say I have 3 dropdownlists on my webpage as below,
List 1, Cities, London, Rome, Barcelona etc
List 2, Restaurants by Type, Italian, chinese, Indian etc
List 3, Number of tables/ seats 10-20, 20- 40, 50 -100
I want someone to be able to search for a restaurant by selecting an item from each dropdownlist
such as, "Barcelona" "Italian" "50-100"
This search query would return all the Italian restaurants in Barcelona with 50-100 tables/seats.
I would also like the select query to work even if one of the dropdownlists items is not selected.
Hope somebody can clear this up?
Also would sql injection attacks be a threat by doing it this way?
Thanks all
How do I write an sql statement to link tables in two databases and query them? For example: SELECT db1.table1.field1, db2.table1.field1 FROM Table1 INNER JOIN db1.table1.field1 ON db2.table1.field1 = db1.table1.field1
Thanks
Hello.
Hope you are all well and having a good day.
I've got a problem i would like you to help me out with. My
company has got a client who sells meat and my senior tech lead
has customized the cart to fit their needs and have created a
despatch table with a "simple asp form" that allows them
to scan their products in with a wi-fi scanner.
The despatch table has the following fields:
1. OrderID
2. Product
3. Quantit
4. sellbydate
5. traceabilitycode and
6. Weight
Question 1: how do i create a form in asp that allow a user to
view the order no, product and quantity
celibate,traceabilitybycode and Weight after scanning the
details into the simple form created?
Question 2: How can i create an asp form that allows users to
search for the Order that populates the orderid, Product,
quantity?
Question 3: How can i create an asp for that allows users to
search for Product with orderid,traceabilitycode and quantity?
Question 4: How can i create an asp form that allows users to
Trace: Orderid, traceabilitycode, sellbydate and Quantity?
Please find below the source code of both the:
despatchLotsRowsSimpleForm.asp that allow them to scan details
into the table and the despatchLotsExec.asp:
THE FORM:
<!#include file="../includes/settings.asp">
<!#include file="../includes/getSettingKey.asp">
<!#include file="../includes/sessionFunctions.asp">
<!#include file="../includes/databaseFunctions.asp">
<!#include file="../includes/screenMessages.asp">
<!#include file="../includes/currencyFormat.asp">
<%
on error resume next
dim mySQL, connTemp, rsTemp
' get settings
pStoreFrontDemoMode =
getSettingKey("pStoreFrontDemoMode")
pCurrencySign = getSettingKey("pCurrencySign")
pDecimalSign = getSettingKey("pDecimalSign")
pCompany = getSettingKey("pCompany")
pAuctions = getSettingKey("pAuctions")
pAllowNewCustomer = getSettingKey("pAllowNewCustomer")
pNewsLetter = getSettingKey("pNewsLetter")
pStoreNews = getSettingKey("pStoreNews")
pSuppliersList = getSettingKey("pSuppliersList")
pRssFeedServer = getSettingKey("pRssFeedServer")
%>
<b><%=getMsg(10021,"despatch")%></b>
<br>
<%=getMsg(10024,"Enter despatch ...")%>
The despatchExec.asp Page
<%
' WebShop 3.0x Shopping Cart
' Developed using ASP
' August-2002
' Email(E-Mail address blocked: See forum rules) for further information
' (URL address blocked: See forum rules)
' Details: add e-mail to newsletter list
%>
<!--#include file="../includes/settings.asp"-->
<!--#include file="../includes/getSettingKey.asp"-->
<!--#include file="../includes/databaseFunctions.asp"-->
<!--#include file="../includes/stringFunctions.asp"-->
<!--#include file="../includes/miscFunctions.asp"-->
<!--#include file="../includes/screenMessages.asp"-->
<!--#include file="../includes/sendMail.asp"-->
<%
on error resume next
dim mySQL, connTemp, rsTemp, pEmail
' get settings
pStoreFrontDemoMode = getSettingKey("pStoreFrontDemoMode")
pCurrencySign = getSettingKey("pCurrencySign")
pDecimalSign = getSettingKey("pDecimalSign")
pCompany = getSettingKey("pCompany")
pEmailSender= getSettingKey("pEmailSender")
pEmailAdmin= getSettingKey("pEmailAdmin")
pSmtpServer= getSettingKey("pSmtpServer")
pEmailComponent= getSettingKey("pEmailComponent")
pDebugEmail= getSettingKey("pDebugEmail")
pGiftRandom= getSettingKey("pGiftRandom")
pPercentageToDiscount= getSettingKey("pPercentageToDiscount")
pStoreLocation = getSettingKey("pStoreLocation")
' form
pidOrder = lcase(getUserInput(request.form("idOrder"),50))
pProduct = lcase(getUserInput(request.form("product"),50))
pQuantity = lcase(getUserInput(request.form("quantity"),50))
pPriceToDiscount = 0
' insert despatch
mySQL="INSERT INTO despatch2 (idOrder, product, quantity ) VALUES ('"
&pidOrder& "', '" &pProduct& "', '" &pQuantity&
"')"
call updateDatabase(mySQL, rstemp, "despatchExec")
pBody=getMsg(10025,"Despatch confirmed...") &VBcrlf&
getMsg(311,"To opt-out click at:") & " (URL address blocked: See
forum rules)="&pEmail
response.redirect "redit_message.asp?message="&Server.Urlencode(getMsg(10025,"Despatch confirmed"))
call closeDb()
%>
Thank you for your help in advance..
Regards,
philip
I am trying to fetch records from excel sheet using Select Query but I am getting the error message saying
"Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)"."
Here is my Query,
sp_configure 'show advanced options',1
reconfigure with override
go
sp_configure 'Ad Hoc Distributed Queries',1
reconfigure with override
go
reconfigure
SELECT *
FROM OPENROWSET
('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:M2MworkedworkedBOS.xlsx;HDR=YES', 'select * from [Sheet1$]') AS A;
I used to do this with classic asp but I'm not sure how to do it with .net.Basically I would take a table of Categories, Then I would loop through those. Within each loop I would call another stored procedure to get each item in that Category. I'll try to explain, Lets say category 2 has a player Reggie Bush and a player Drew Brees, and category 5 has Michael Vick, but the other categories have no items.Just for an example.. Category Table: ID Category1 Saints2 Falcons3 Bucaneers4 Chargers5 FalconsPlayer Table:ID CategoryID Player News Player Last Updated1 1 Reggie Bush Poetry in motion 9/21/20062 1 Drew Brees What shoulder injury? 9/18/20063 5 Michael Vick Break a leg, seriously. 9/20/2006 Basically I would need to display on a page:SaintsReggie BushPoetry in MotionFalconsMichael VickBreak a leg, seriously.So that the Drew Brees update doesnt display, only the Reggie Bush one, which is the latest.I have my stored procedures put together to do this. I just don't know how to loop through and display it on a page. Right now I have two datareaders in the code behind but ideally something like this, I would think the code would go on the page itself, around the html.
View 1 Replies View RelatedHello,
My company Intranet has a form that agents can use to post their comments about the company to upper management, but our customer service department would like to modify the form so that the agent has to pick from a comment type.
The dropdown options on the form will be as follows:
ComplimentsComplaintsGeneral CommentsSuggestions
Each dropdown option has a designated table in a SQL DB.Using postback on the same page, I need to change which fields of the form are visible based upon which dropdown selection the user chooses, and I need the fields to then be inserted into the table that corresponds with the dropdown selection item.
For example: If the Compliments dropdown selection is picked, I need a text box to show for the user's location, the name of the customer, account number, and the message box. Once the submit button is clicked, the characters in these boxes need to be inserted into the Compliments table using its data adapter.
However, if the user selects Suggestions, the name of the customer and the account number should not be visible, since these fields do not exist and when the submit button is pressed, the Suggestions table should be updated.
If you need more information, I will provide whatever is needed.
As always, thanks for everyone's assistance.
Chris
i need help to get the value of a column which is selected from a column of another table....
View 3 Replies View RelatedI have set up a 'Parameters' table that solely stores all pre-assigned selection values for a webform. I customized a stored query to Select the values from the Parameters table. I set up the webform. The result is that the form1.apsx automatically populates each DropDownList task with the pre-assigned values from the 'Parameters' table (for example, the stored values in the 'Parameters' table 'Home', 'Business', and 'Other' populate the drop down list for 'Type').
The programming to move the selected data from form1.aspx to a new table in the SQL database perplexes me. If possible, I would like to use the form1.aspx to Postback (or Insert) the "selected" data to a *new* column in a *new* table (such as writing the data to the 'CustomerType' column in the 'Customers' table; I clearly do not want to write back to the 'Parameters' table). Any help to get over this hurdle would be deeply appreciated.
Hi,
I got a problem.
I installed Microsoft SQL Server Management Studio Express 2005 version.
And I created a Compact database.
I created an connection in SSMSE to connect the database and opened a query form.
then, i run the following sql:
Select * from Table1
It returned 3 records to me.
After that, I used program to insert record into this table.
Then i ran this sql again, it still show me 3 records.
I closed the query form, and re-created a new query form, then run the sql, it returned 4 records to me.
Why? It's very strange and difficult to operate, right?
Is there anyone know how to make the SSMSE to return whole records without any close query form and re-create query form operation?
Thanks a lot!
And Merry X'max!!!
Hi everyone,
What is the main difference between first form normalizations and second form normalization ?
In my opinion, they are both generated for the same operation which is to prevent redundancy(in other words; duplication of data in several records).
So would you please explain it to me ?
Thanks