Hi friends,
Though we can send mails to Individual addresses, I wonder what would be the Syntax to specify in the script task or Format to specify in a "To" Property of Send Mail task that I use to Send a mail to my Personal Distribution List (PDL).
Thanks
Subhash Subramanyam
I am writing a stored procedure that sends mail to different distribution lists depending on different variables. I am having trouble passing in a local variable into the @recipients parameter for xp_sendmail. How can I do this?
View 1 Replies View Relatedhi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedHello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies View RelatedHi,
I wrote the following function in an ActiveX script task in the database transformation. When I sent it to my own email address, it sent out the message fine, but when I change it to "SP Directors" which is a distribution list, and execute this step, it gave the error stated: "ActiveX Scripting encountered a Run Time Error during the execution of the script." Any one can help me on this problem, thank you so much in advance.
Function Main()
dim eMailString
eMailString = "xxxxxxxxx test"
Set objMessage = CreateObject("CDO.Message")
objMessage.Subject = "Test " & Time()
objMessage.Sender = "js@comcast.com"
objMessage.To = "SP Directors"
objMessage.TextBody = eMailString
objMessage.Configuration.Fields.Item _
("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
'Name or IP of Remote SMTP Server
objMessage.Configuration.Fields.Item _
("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "mail.iparty.com"
'Server port (typically 25)
objMessage.Configuration.Fields.Item _
("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
objMessage.Configuration.Fields.Update
'==End remote SMTP server configuration section==
objMessage.Send
Main = DTSTaskExecResult_Success
End Function
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies View Related
Good Morning,
Can you please let me know if it is possible to use a distribution list created in Outlook for sending reports via the automated email delivery system within SSRS? or do I have to set up distribution lists within SSRS?.
Thanks for you help.
Steve
Hello folks,
Does anybody have experience with e-mail distribution using Data Driven Subscriptions?
I want to build the following:
I have a table with names and e-mail addresses of people in my data warehouse. This table changes over time, more people will be added and data (for example e-mail addresses) can change.
I made 1 report that I want to mail to all the people in the table. This report contains 1 parameter; the e-mail address of a person.
So basically it€™s quite simple: I want to e-mail all the people in the table a personalized (by the parameter) report each month.
Can anybody tell me how I can achieve this with SSRS 2005(SSEE)? I know how to make a data driven subscription but how can I make one pending on the data in a table?
Any help would be appreciated. I will write a blog about this when I've done it so your input will not get lost.
Jorg
I would like to replace mymail@mail.com by mypdl@mail.com , where mypdl is basically a people distribution list with 2 emails: my own email and my coworker and fellow DBA.
IF EXISTS
(
SELECT TOP 1 [PercentUsed]
FROM [BackupSize]
WHERE PercentUsed>=70 AND [drivename]='D:' -- D is the internal drive
ORDER BY [MetricDate] DESC
[Code] ...
But I think this won't work by design. Maybe I need to create an operator?
Is there anyway to  send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.Â
View 6 Replies View Relatedxp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
View 1 Replies View RelatedHi,
How can I Send Mail with the query result having multiple rows. What type of dataflow destination is correct (recordset, datareader). The Send Mail task is working correctly. But, the message is blank without any result set.
Appreciate your help.
Thanks
hi friends
1) sql connection SMTP Connection Manager 1 (windows authenditacaion/smtp both itried i was selected)
2) from/to /cc : i entered som mail ids of yahoo
3) subject : Hi koti how r u ,i am fine here
4) message source type : variable
SMTPSERVER: it is just string with null value i was declare a variable
ok fine then
how to use the send mail in the foreach loop example please send me
regards
koti
Hi,
I have a requirement of sending mail through SQL Server through SMTP port... But, I dont want to configure my database server as e-mail client...
Is there any way to do it...
Thanks in advance...
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task.
The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
Thanks
Radhika
hi
how to send mail in sql server2005
Hi all
I want to send a mail from sqlserver2005.
could you help me out
hi allmy query is how can i send mail by using sql server, i think by unsingxp_sendmail store procedure we can do this but my problem is whatparamater to be pass to this store procedure if i want to send mailfrom my local machine to another user, bcos i am geeting this errormsg in query analyzer...query:-EXEC master..xp_sendmail 'ss35934' (ss35934 is valid user namepresent into my local nerwork)getting error msg :- xp_sendmail: failed with mail error 0x80040111from:- sachin shah
View 3 Replies View RelatedI have a SQL Server 2000 application that send's e-mail to users usingthe xp_smtp_sendmail procedure. That works fine. What I would liketo do is RECIEVE e-mail with SQL Server.Example: I text message an alert to a user. They reply with somekeyword in the subject of their reply e-mail, such as 'ACKNOWLEDGED'or 'ACK' for short. SQL Server recieves this and then acts upon itwith a stored procedure, etc.Anyone know if this is possible and with what tool?TIA,Lindsey
View 3 Replies View Relatedhi.
View 9 Replies View RelatedI need to send an email for each row in a dataset. The data set will contain the order number. I need to first look up the order detail based on the order number and put it into an e-mail. Should I use the OLE DB command object for this?
View 3 Replies View RelatedHi All,
I want to use send mail task with multipal email address for that i have to use comm or ?
Thank You,
Aric