How To Send A Flat File To Sql Server 7 Using DTS

Feb 17, 2002

I have a flat file which contains like:
MEPMD01,19970819,test/ts1,35100,EASTERN,35100,200202140818,50767210,OK,E ,KHREG,1,00010014,02,200202130801,,00002651.556,20 0202140815,,00002668.860,


I want to transfer this file to a sql server database table.

My problem is how to send the above string to a table by formating like removing commas.

Can I do that using DTS. I need the answer very quickly.

Any help would be appreciated.

Or there is any better way to transfer the content to the table.

View 2 Replies


ADVERTISEMENT

How To Send Query Results To A Flat File?

Jul 26, 2001

SQL Server is new to me.

I am using SQL Server 7.0 Query analyzer. I need to send my query results to a flat file. My select statement is 'SELECT * from table_a'.

Can someone help?

View 1 Replies View Related

Unable To Edit Pre-defined Flat File Connection Manager Properties In The Flat File Destination Editor

Aug 24, 2007

Hi,

I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.

Did someone else faced this issue?


Thanks,
AQ

View 1 Replies View Related

Flat File Connection Manager Throws Error When A Column Gets Added To The Flat File

Dec 27, 2006

Hi,

I have a situation where a tab limited text file is used to populate a sql server table.

The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away  where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?

View 5 Replies View Related

Output Column Width Not Refected In The Flat File That Is Created Using A Flat File Destination?

May 11, 2006

I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?

Any inputs will be appreciated.

M.Shah

View 3 Replies View Related

Integration Services :: Send Excel File From SSIS Using Send Mail Task Without Saving Excel File Locally?

Jul 14, 2015

Is there anyway to  send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people. 

View 6 Replies View Related

How To Redirect The Error Of A Source Flat File To The Destination Flat File?

Nov 10, 2006

Hi all,

I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.

Debugging is succesful but i am not getting any error output in the Flat file destination file.

i had done exactly which is written in the msdn tutorial of SSIS.

Plz tell me why i am not getting the error output in the destination flat file?

thanx

View 1 Replies View Related

Transact SQL :: Why Does File Seem Displaced When Send Server Results To A File

Aug 24, 2015

I have the following SQL

IFOBJECT_ID('tempdb..#TempTable_Lockbox_File_Header_Record')IS NOTNULLDROP TABLE#TempTable_Lockbox_File_Header_Record
;
IFOBJECT_ID('tempdb..#TempTable_Lockbox_Batch_Header_Record')IS NOTNULLDROP TABLE#TempTable_Lockbox_Batch_Header_Record
;

[code]....

When I send my query results to a file in SQL Server Management Studio, how come I'm seeing the following in Notepad++? FH   TEST "FH" which I thought should be in a CHAR(2) data column is there but "TEST" seems to start in Column 6...not column 3 as I would have expected. I was expecting... FHTEST.

View 3 Replies View Related

Converting Flat File To SQL2005 Table (Flat File From H***)

Feb 11, 2008

First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.

I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).

My questions are below the sample files.


Code Snippet
Record Length 400

Positions Length FieldName

Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**


and the single line flat file...



Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500





As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.

I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...


Is it possible to make 5 tables from this one file, one table for each of the record types?

If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?

Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.

Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!

View 13 Replies View Related

How To Send File To Different Server Using FTP

May 4, 2015

I found following script but getting invalid command error.

/****** Object: StoredProcedure [dbo].[FtpPutFile] Script Date: 03/25/2014 10:07:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:<Author,,Name>
-- Create date: <Create Date,,>

[code]....

View 0 Replies View Related

Send A File From Database Without Saving It To Server First!

Jan 2, 2007

hi
I have binary files inside my database. and user should have the opportunity to download them from database to his computer. I don't want to retrive and save the file into the server first and then let him to download. is it posible???
thank you in advance
regards

View 3 Replies View Related

SQL 2012 :: Run A Command To Send File To TSM Server

Oct 3, 2014

write a backup to local disk and then run a command to send the file to the TSM Server.This is the command I use at a Command Prompt to do an TSM incremental backup.

Command for an incremental backup of drive letter h:
C:Program FilesTivoliTSMaclientdsmc incremental h:

Command for an incremental backup of a mount point:
C:Program FilesTivoliTSMaclientdsmc incremental -domain="E:Backup"

I would like to be able to run this as the last step in my backup processes. This would allow me to send my local backup file to the TSM server to write to tape.

I am looking for either a CMDEXEC Expert that could show me the syntax to run these commands via a direct command or a batch job. The other option would be to run these commands via the Powershell type.

View 3 Replies View Related

Send/Receive Text File Using To Some Server Using FTP

Jul 20, 2005

Hi All,I have to write a stored procedure which will send/Receive text filefrom/to a server by using FTP.Is anybody have done anything on it? or know about it.If yes, I would like to know about it. (also provide the storedprocedure code if possible)Thanks in Adv.T.S.Negi

View 3 Replies View Related

How Can I Take This Example Flat File And Parse Out Each Section To A New Flat File? Each Section Starts With HD (header Row)

Mar 13, 2006

How can I take this example Flat file and parse out each section to a new flat file?  Each section starts with HD (header row)

http://www.webfound.net/flat_file_example.txt

e.g. an example output file based on above (cutting out the first section) would be:

http://www.webfound.net/flatfile_output.txt

Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed.  I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible?  The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:

1) output each group (broken by each header row) into it's own txt file

2) use a field in  the  header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt.  I want to grab the text 'AR10' and use that as part of the filename that I create

Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?

View 1 Replies View Related

SQL Server 2014 :: Send CSV File With DB Sendmail - Missing Records

May 19, 2015

I am trying to send a csv file with 15000 records via the database mail in SQL Server 2014. The problem is that when I open my email the csv only contains 209 records. I have tried the same thing in SQL Server 2012 and it works as expected - it sends the 15000 records in the csv.

I have tested this on several sql servers with 2014 edition on them, and I have the same issue on all of them. The query breaks off at different points on each sever - for example one of them breaks off at 209 records as i said above, another one at 307. The last record always gets truncated at the same place. The csv attachment size it's about 64 kb - which is well below the 4MB limit i've configured the database Maximum File Size bytes parameter.

What i am doing basically is creating a job that is meant to execute a stored procedure and send the results in a csv in an email. The stored procedure is something like:

select col1, col2, col3
from table A1

where col1 > 1000 order by col1

View 2 Replies View Related

Send Sql Statement From Vs2005; Detach A Mdf File From Sql Server Express

Sep 17, 2007



Hi,

as I'm relatively new to Sql Server Express, I have a few questions regarding best practices for data handling.

In my ASP.net Application I thought it might be of high value to create the database as mdf file in my vs2005 project,
so I could easily copy the database with the project.

Now inside VS2005 I have the problem of not being able to create any SQL Statements other than queries. For example simple create table statements and such seem not to be possible if I don't want to use the designer.

So I attached the mdf file to my Sql Server Express in Sql Management Studio Express.
But here I seem not be able to detach the file again when I made some changes. Only option is to delete the whole thing.


So my questions are:

1. Is it somehow possible to send simple sql statements to a sql server express database from Visual Studio 2005?
2. How can I detach an mdf database file from Sql Server Express once I have attached it with Sql Management Studio Express?
3. Should I use a different approach to my problem?


thank you all in advance

View 1 Replies View Related

Migration From Flat File To SQL Server 7

May 30, 2001

I inherited a flat file system of 100 "tables" with no PK/FK constraints, nor relationships in the RDBMS. The "constraints" are in the application (Bad Stuff I know). It's pretty obvious that they haven't worked.
The files are like this:

File A File B
Last_Name Task
First_Name Date_of_Task

When I run a query I get the following results:

Last Name First Name Task Date
Same Last Name Same First Name Different Task Date
Same Last Name Same First Name Different Task Date, etc.

I want to get rid of the redundant names. I have created a new database with the PK/FK restraints in place. However, I'm not sure how to migrate the old data into the new database. I want to make the Task column a date rather than a task itself. The task will be labeled in the column heading.
I'd like the outcome from a query to be:

lastname First Name Task 1 Task 2 Task3,....

I'm new to SQL and it seems like I need to run some sort of Sub Query, but I haven't been able to hit on the correct command/syntax. Thanks for your help.

Mark

View 2 Replies View Related

Copy Flat File Between Two Server; Help Me Please.

Feb 21, 2007

Hello All,

I want to copy flat file(.txt) from server to another server.

server A(Source Folder) ====> server B(Achive Folder)

Can I do it?

Please, help me.



Thank you very much.

Chonnathan

View 6 Replies View Related

How Do I Import A Flat File (.txt) To Sql Server Using Asp.net

Apr 3, 2008

Hi.

I want to import a flat file to my sql server database. My sql server and web server are on different machines. I used a bulk insert to import the data using a Format.. But now since the sql server and the web server are on different machine it doesnt load the data to the sql server..

i have tried giving http://Ipaddress/Path and that didnt work.. tried mapping the network drive to the webserver and then specified the location and that didnt work too..

I found this connection string on the internet
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=c: xtFilesFolder;Extended Properties="text;HDR=Yes;FMT=Fixed";

but i am not sure how to give a ~ delimited and specify a format file..

any help will be appreciated..

Regards,
Karen

View 9 Replies View Related

SQL 2012 :: Send Binary File Stored In Server As Email Attachment?

Apr 26, 2014

Is there a way to send binary file stored in SQL Server as email attachment without downloading it to the file system?

View 1 Replies View Related

SQL Server 2008 :: Excel File Name In Send Mail Task Using SSIS

Jun 1, 2015

I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:

"E:ReportingDelivered_ReportsExcelName_"+
((DT_WSTR,4)Year(@[System::StartTime]))+
RIGHT("0"+((DT_WSTR,2)Month(@[System::StartTime])),2)+
RIGHT("0"+((DT_WSTR,2)Day(@[System::StartTime])),2)+".xls"

I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.

View 7 Replies View Related

Import Flat File To A Sql Server Database..

Feb 20, 2008

Hi.
   I want to upload a Flat file from an asp.net website to a Sql server.. I have used olebb provider to upload excel files and a foxpro provider to upload DBF files and then used the sqlbulkcopy to put the data to my sql server..
 
SO i was wondering what kinda provider should i use to import a Flat file to the database and do i have use a format file in order to import it...
 Any help will be appreciated..
Regards,
Karen

View 7 Replies View Related

Importing To Swl Server From A Flat File PK Problem

Oct 13, 2004

I am trying to import into sql server from a .csv flat file i made in excel. The problem is the Primary Key. It is set to auto increment.
When i leave an empty column i get:
"Directcopyxform conversion error:destination does not allow null"

when i just omit the column entirely, i get a wrong datatype error because it basically tries to copy all the columns 1 shift to the left

How am i supposed to represent and auto PK in .csv file. Thanks

View 1 Replies View Related

Extract Data From SQL Server Into .XLS Or Flat File...

May 8, 2001

Hi,

I am interested in writing a stored procedure that will compute and select data from SQL Server 2000 database and store it into a .XLS or flat file.

how can i do that ?

need help.

Thanks.

-- Parag

View 3 Replies View Related

Transfering A Flat Text File In DTS To SQL Server

Dec 26, 2006

How do I tranfer a flat file (text) to SQL Server using DTS? Please point me in the right direction.

View 19 Replies View Related

Create A Flat File On A Remote Server

Jul 11, 2006

Hi,

In the new flat file connection dialog box, can i create a flat file on a remote server? thanks.

View 1 Replies View Related

Import Flat File To Sql Server Programmatically

Mar 2, 2007

Hi,

i want to import flat file data to sql server. i created a package in vb.net. if the import table column is identity means i got

Failure inserting into the read-only column "ID".
Column metadata validation failed.
"component "OLE DB Destination" (10)" failed validation and returned validation status "VS_ISBROKEN".
One or more component failed validation.
There were errors during task validation. error.

how can i rectify this error? or how can i ignore the identity column in coding.



thanks & regards,

sivani



View 6 Replies View Related

How To Load A Flat Text File Into MSDE / SQL Server

Mar 27, 2001

Hi!

How do I load a comma-delimited text file into MSDE? How does it work for SQL Server 7?

Thanks,
Helmut

View 1 Replies View Related

SQL Server 2008 :: Loading Data From 5 GB Flat File

Mar 27, 2015

Designing a solution for loading data into SQL destination from a single 5/10 GB flat file? If yes, what kind of performance measures you have taken while designing the solution ?

View 3 Replies View Related

Import Flat File Into SQL Server 2005 Express

Jan 6, 2007

I am new to SQL Server, and migrating part of an Access application toSSE. I am trying to insert a comma delimited file into SSE 2005. I amable to run a BULK INSERT statement on a simple file, specifying thefield (,) and row () terminators. I can also do the same with aformat file.Here is the problem. My csv file has 185 columns, with a mixture ofdatatypes. Sometimes, a text field will contain the field delimiter aspart of the string. In this case (and only in this case) there will bedouble quotes around the string to indicate that the comma is part ofthe field, and not a delimiter.Is there any way to indicate that there is a text delimiter that isonly present some of the time?If not, any suggestions on getting the data into SSE?Many thanks for your input.Cheryl

View 9 Replies View Related

Multiple Flat File Import To Corresponding SQL Server Tables

Mar 23, 2007



We are trying to use SSIS Import export wizrd to import the flat files (CSV format) that we have into MS SQL Server 2005 database tables. We have huge number of CSV files. Is there a way by which we can import these flat (CSV) files in to corresponding SQL server tables in a single shot. I would really appreciate this help as it is painful to convert each and every file using the Import Export wizard.

Thank you very much,

Regards,

Srinivas Raveendra

View 10 Replies View Related

Creating Flat File And SQL Server 2005 Hangs...

Feb 10, 2006

i m using the hands-on labs for SQL server 2005.

Step 6 age 14 i went thro and it make my SQL server 2005 hangs when i try to use the flat file destination.

View 1 Replies View Related

Need Help On Ragged Right Flat File Data Loading Into SQL Server DB

Oct 30, 2007



Iam trying to load a RR Flat File(Ragged Right) into SQL Server DB Destination.

The file feeds the data into two tables and the logic looks like this..

If Position 30 = ''

Record Set goes into Table 1
Else

Record Set goes into Table 2

I have no clue where to start with my limited SSIS Exposure.. Any Ideas as to what i shud be starting with (Transformations)??

Thanks in Advance.


View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved