How To View Only Time In SQL?
Jan 14, 2005
hi.. i'm using sql server 7.0 and visual basic 6.0 to develop a system for a project in one of the module that i'm studying. i've encountered 2 problems here.. hope someone here can help me..
1. this is one of the table in the database..
Create Table RepairRecord
(RR_Id char(10) Not Null,
RDate datetime Not Null,
RTime datetime Not Null,
PartName varchar(20),
PartCost decimal(7,2),
Description varchar(50),
ENG_Id char(10) Not Null,
SA_Id char(10) Not Null,
Primary Key (RR_Id),
Foreign Key (ENG_Id) References Engineer(ENG_Id),
Foreign Key (SA_Id) References ServiceAgreement(SA_Id));
is the attributes highlighted in bold correct? and in RTime, i've declared the datatype as datetime.. but actually i just want it to show only time.. how do i do that?
2. there's a requirement that we need to give our lecturer a soft copy of this whole system. well, just don't want to waste any CD-R, how to burn everything in the cd and it will work fine using the cd itself? i once tried to burn one but can't run cos it said can't find database...
well.. visual basic is the front-end while sql is the back-end..
so, anyone can help??
View 2 Replies
ADVERTISEMENT
Apr 26, 2007
I have a query that is taking 30-40sec to execute in a SQL Server 2005 Standard Edition database. However, when I use that same query to create a named view, and then try to open the view, I get the following error (eventually) after I attempt to open the view:
Executed SQL Statement: select ....
Error Source: .net sql data provider
Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation, or the server is not responding.
Is there a server or set parameter that I can adjust that will allow my view to complete execution?
View 2 Replies
View Related
Jun 12, 2015
Currently I have around 4 million records. I have normalized the table the best I know how. I am using SQL Server 2008 r2 express running on a local instance. I am trying to create a view in the View designer. I run the query in query editor it takes just under a minute to run. When I run it in the view designer it times out in 30 sec.Â
View 3 Replies
View Related
May 22, 2006
Hi!
When I using SQL Server 2005 to buide a Time Series mining model, in the Charts tab, it show the chart about somthing to predict in the future.
How to view that Time Series Chart in C# . ( Or using a third component)
View 5 Replies
View Related
Mar 14, 2008
I'm trying to clean up our report server and prune reports that are no longer in use by our users. Is there a way to find out the last time a report was accessed?
Thanks.
View 1 Replies
View Related
Oct 18, 2006
1. I have a table with data like this:
PersonID
DateTime
Temperature
Pressure
2. I want to build a view into this table so that it shows up as follows:
PersonID DateTime1 DateTime2 DateTime3 .....
1 Pressure1 Pressure2 Pressure3 ......
1 Temperature1 Temperature2 Tempearture3 .....
2 :
:
how would I do this?
View 5 Replies
View Related
Mar 7, 2006
Hi, I am using sql server 2005 entreprise edition. I am just wondering
when I have a report with parameters and the report uses stored
procedure to retrieve the result set for use in the report, if two
people from different places are trying to view the report at the same
time, and each of them use different set of parameters.
Will they be able to view their report correctly??
View 6 Replies
View Related
Sep 1, 2006
Good afternoon everyone, I have written a view that pulls customer demographic infomration as well as pulling data from multiple scalar-valued functions. I am using this view to pull and send data from one database to another in the same SQL server. The problem that I am having is that I am running this import as a scheduled job in windows. The job is taking almost 24 hours to complete this task. The total number of records that are being pulled is around 21,000+. I have tried removing the functions from the view and it only takes the view 20 seconds to pull the demographic information from the same 21,000+ records but when I add the function calls this is where the time to complete goes through the roof. Has anyone encountered this before if so what would you suggest doing? Any help would be appreciated. Here is the syntax for my view: SELECT TOP 100 PERCENT CUS_EMAIL AS Email, CUS_CUSTNUM AS MemberID, CUS_PREFIX AS Prefix, CUS_FNAME AS FirstName,
CUS_LNAME AS LastName, CUS_SUFFIX AS Suffix, CUS_TITLE AS Title, CUS_STATE AS State, CUS_COUNTRY AS Country, CUS_ZIP AS ZipCode,
CUS_SEX AS Gender, CAST(CUS_DEMCODEA AS nvarchar(20)) + ',' + CAST(CUS_DEMCODEB AS nvarchar(20))
+ ',' + CAST(CUS_DEMCODEC AS nvarchar(20)) + ',' + CAST(CUS_DEMCODED AS nvarchar(20)) AS DemoCodes,
dbo.GetSubScribedDateMLA(CUS_CUSTNUM, CUS_EMAIL) AS MLASubscribedDate, dbo.GetSubScribedDateMLP(CUS_CUSTNUM, CUS_EMAIL)
AS MLPSubscribedDate, dbo.GetSubScribedDateLDC(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubscribedDate, dbo.GetMLAExpiration(CUS_CUSTNUM,
CUS_EMAIL) AS MLASubExpireDate, dbo.GetMLPExpiration(CUS_CUSTNUM, CUS_EMAIL) AS MLPSubExpireDate,
dbo.GetLDCExpiration(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubExpireDate, dbo.IsProspect(CUS_CUSTNUM, CUS_EMAIL) AS AGMProspect,
dbo.IsCurrentCustomer(CUS_CUSTNUM, CUS_EMAIL) AS AGMCurrentCustomer, dbo.IsMLAMember(CUS_CUSTNUM, CUS_EMAIL) AS MLAMember,
dbo.IsMLPMember(CUS_CUSTNUM, CUS_EMAIL) AS MLPMember, dbo.IsLDCMember(CUS_CUSTNUM, CUS_EMAIL) AS LDCMember,
dbo.CalculateTotalRevenue(CUS_CUSTNUM, CUS_EMAIL) AS AGMTotalRevenue, dbo.GetPubCodes(CUS_CUSTNUM, CUS_EMAIL)
AS ProductsPurchased, dbo.GetEmailType(CUS_CUSTNUM, CUS_EMAIL, CUS_RENT_EMAIL) AS EmailType, CUS_COMPANY AS Company,
CUS_CITY AS City
FROM dbo.CUS
WHERE (CUS_EMAIL IS NOT NULL) AND (CUS_EMAIL <> '') AND (CUS_EMAIL_VALID = 'Y') AND (CUS_EMAIL LIKE '%@%.%') AND (CUS_RENT_EMAIL = 'Y' OR
CUS_RENT_EMAIL = 'R' OR
CUS_RENT_EMAIL = 'I') AND (CHARINDEX(' ', CUS_EMAIL) = 0) AND (CUS_EMAIL NOT LIKE '@%')
Thanks in advance Michael Reyeros
View 9 Replies
View Related
Apr 19, 2007
Hi folks,
After getting a form view inserting some values into a mdb file, it inserts the same values a second time on page reload.
How may I cure this? Any suggestions?
VB Code is below.
many thanks in advance
Rosi
1 <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="km_Eingabe.aspx.vb" Inherits="km_Eingabe" title="km-Eingabe" %>
2 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
3 <table style="width: 750px; height: 210px">
4 <tr>
5 <td style="height: 38px">
6 </td>
7 <td style="height: 38px">
8 <asp:DropDownList ID="dropdownlist1" runat="server" AutoPostBack="True" DataSourceID="AccessDataSource2"
9 DataTextField="polKennz" DataValueField="polKennz">
10 </asp:DropDownList>
11 </td>
12 <td style="height: 38px">
13 </td>
14 </tr>
15 <tr>
16 <td style="height: 235px">
17 </td>
18 <td style="height: 235px" valign="top">
19
20 <asp:FormView ID="FormView1" runat="server" CellPadding="4" DataSourceID="SqlDataSource1"
21 ForeColor="#333333">
22 <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" />
23 <EditRowStyle BackColor="#999999" />
24 <EditItemTemplate>
25
26 </EditItemTemplate>
27 <RowStyle BackColor="#F7F6F3" ForeColor="#333333" />
28 <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" />
29 <EmptyDataTemplate>
30 keine Daten vorhanden
31 <br />
32 <asp:LinkButton ID="NewButton" runat="server" CommandName="New" Text="Neuer Eintrag"></asp:LinkButton>
33 </EmptyDataTemplate>
34 <InsertItemTemplate>
35 Datum:
36 <asp:TextBox ID="DatumTextBox" runat="server" Text='<%# Bind("Datum", "{0:d}") %>'>
37 </asp:TextBox>
38 <br />
39 Fahrer:
40 <asp:TextBox ID="FahrerTextBox" runat="server" Text='<%# Bind("Fahrer") %>'>
41 </asp:TextBox>
42 <br />
43 polKennz:
44 <asp:TextBox ID="polKennzTextBox" runat="server" Text='<%# Bind("polKennz") %>'>
45 </asp:TextBox>
46 <br />
47 neuer_Eintrag:
48 <asp:TextBox ID="neuer_EintragTextBox" runat="server" Text='<%# Bind("neu") %>'></asp:TextBox>
49 <br />
50 aktuell:
51 <asp:TextBox ID="aktuellTextBox" runat="server" Text='<%# Bind("aktuell") %>'></asp:TextBox> <br />
52 <br />
53 <asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"
54 Text="Einfügen" OnClick="InsertButton_Click">
55 </asp:LinkButton>
56 <asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"
57 Text="Abbrechen">
58 </asp:LinkButton>
59 </InsertItemTemplate>
60 <ItemTemplate>
61 Datum:
62 <asp:Label ID="DatumLabel" runat="server" Text='<%# Bind("Datum") %>'></asp:Label><br />
63 Fahrer:
64 <asp:Label ID="FahrerLabel" runat="server" Text='<%# Bind("Fahrer") %>'></asp:Label><br />
65 polKennz:
66 <asp:Label ID="polKennzLabel" runat="server" Text='<%# Bind("polKennz") %>'></asp:Label><br />
67 neu:
68 <asp:Label ID="neuLabel" runat="server" Text='<%# Bind("neu") %>'></asp:Label><br />
69 lfdNr:
70 <asp:Label ID="lfdNrLabel" runat="server" Text='<%# Eval("lfdNr") %>'></asp:Label><br />
71 aktuell:
72 <asp:Label ID="aktuellLabel" runat="server" Text='<%# Bind("aktuell") %>'></asp:Label><br />
73 Dienststelle:
74 <asp:Label ID="DienststelleLabel" runat="server" Text='<%# Bind("Dienststelle") %>'></asp:Label><br />
75 <asp:LinkButton ID="NewButton" runat="server" CommandName="New" Text="Neuer Eintrag"></asp:LinkButton>
76 </ItemTemplate>
77 <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" />
78 </asp:FormView>
79 </td>
80 <td style="height: 235px">
81 </td>
82 </tr>
83 <tr>
84 <td>
85 </td>
86 <td>
87 </td>
88 <td>
89 </td>
90 </tr>
91 </table>
92 <asp:AccessDataSource ID="AccessDataSource2" runat="server" DataFile="~/App_Data/KfzDaten_Ansicht.mdb"
93 SelectCommand="SELECT DISTINCT [polKennz] FROM [qry_KennzeichenAlle_ohne_ausgesondert]">
94 </asp:AccessDataSource>
95 <asp:AccessDataSource ID="AccessDataSource1" runat="server" DataFile="~/App_Data/KfzDaten_Ansicht.mdb"
96 SelectCommand="SELECT DISTINCT [Datum], [Nutzer], [Fahrer], [polKennz], [aktuell], [neu], [gefahren] FROM [qry_Fahrtenbuch_letzter_Eintrag_pro_Kfz] WHERE ([polKennz] = ?)">
97 <SelectParameters>
98 <asp:ControlParameter ControlID="DropDownList1" Name="polKennz" PropertyName="SelectedValue"
99 Type="String" />
100 </SelectParameters>
101 </asp:AccessDataSource>
102 <asp:SqlDataSource ID="SqlDataSource1" DataSourceMode="DataSet" ConflictDetection="CompareAllValues" InsertCommandType="Text" runat="server" ConnectionString="<%$ ConnectionStrings:KfzDaten_Ansicht_mdbConnectionString %>" ProviderName="<%$ ConnectionStrings:KfzDaten_Ansicht_mdbConnectionString.ProviderName %>"
103 InsertCommand= "INSERT INTO Tab_import_Fahrtenbuch([Datum], [Fahrer], [polKennz], [neu], [aktuell]) VALUES (@Datum, @Fahrer, @polKennz, @Eingabe_neu, @Eingabe_aktuell )" >
104 <SelectParameters>
105 <asp:ControlParameter ControlID="dropdownlist1" Name="newparameter" PropertyName="SelectedValue" />
106 </SelectParameters>
107 <InsertParameters>
108 <asp:FormParameter FormField="DatumTextBox" Name="Datum" Type="string" />
109 <asp:FormParameter FormField="FahrerTextBox" Name="Fahrer" Type="string" />
110 <asp:FormParameter FormField="polKennzTextBox" Name="polKennz" Type="string" />
111 <asp:FormParameter FormField="neuer_EintragTextBox" Name="neu" Type="Int32" ConvertEmptyStringToNull="false" />
112 <asp:FormParameter FormField="aktuellTextBox" Name="aktuell" Type="Int32" ConvertEmptyStringToNull="false" Direction="Input" />
113 </InsertParameters>
114 </asp:SqlDataSource>
115
116 </asp:Content>
117
118
View 5 Replies
View Related
Feb 15, 2005
Hi all,
I have two tables (staging and Cdate) and neither objects has any constraints.
staging table has ID, date, A, B, and C fields and Cdate has id,date and day fields. I need to update/insert date from Vdate into staging where staging ID=' ' and date is null
Here is the code I wrote, however, it seemed the information was updated to one date only instead of time series - Cdate contains time series in column date.
Anyone can help to fix it? Thank you for the help!
update s
set s.date=c.date
FROM cdate c join staging s on(s.id=c.id)
Where s.date is null and id=2
View 3 Replies
View Related
May 27, 2006
i have a Time Series mining model. I want to view the chart in Reporting Services.
Help me!!!!!!
View 1 Replies
View Related
Feb 28, 2005
Hello, I need some help, I am in school right now and I am in a SQL server class. We have been working in the query analizer making a database. Well I have to print out everything that I have typed. But I want to view it first. How do I do that?
Sorry I did a search and couldnt find anything.. Probably cause I dont really know what to search for or look under. Thanks for your guys time.
~Matt
View 2 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
Jul 23, 2005
I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies
View Related
Jul 24, 2012
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
View 2 Replies
View Related
Aug 24, 2007
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
View 3 Replies
View Related
Mar 9, 2006
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies
View Related
Apr 25, 2014
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
View 7 Replies
View Related
Jun 11, 2015
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies
View Related
Oct 22, 2015
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?Â
View 2 Replies
View Related
Oct 3, 2015
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
View 14 Replies
View Related
Dec 15, 2006
I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
View 1 Replies
View Related
Apr 21, 2015
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
View 8 Replies
View Related
Nov 12, 2007
Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp €“ all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we don€™t log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table €“ we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
View 8 Replies
View Related
Sep 21, 2015
I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies
View Related
Dec 26, 2014
I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
View 2 Replies
View Related
Oct 7, 2015
I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
View 0 Replies
View Related
Aug 14, 2000
I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
View 1 Replies
View Related
Feb 17, 2006
I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help
View 4 Replies
View Related
Feb 19, 2008
Hi all,
I have a very simple time series model which processing works fine without any problem. However when I run the following query
SELECT
[TimeSeries].[PriceChange],
[TimeSeries].[Symbol],
PredictTimeSeries(PriceChange, -3, 2)
From
[TimeSeries]
WHERE
[TimeSeries].[Symbol] = 'x'
I get the following error:
TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
The following is the excerpt of the minding model script related to the two parameters:
<AlgorithmParameters>
<AlgorithmParameter>
<Name>MISSING_VALUE_SUBSTITUTION</Name>
<Value xsi:type="xsdtring">Previous</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_GAP</Name>
<Value xsi:type="xsd:int">1</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_COUNT</Name>
<Value xsi:type="xsd:int">10</Value>
</AlgorithmParameter>
</AlgorithmParameters>
These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?
View 3 Replies
View Related
Apr 30, 2015
we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies
View Related
May 26, 2005
Hi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!
View 2 Replies
View Related
Aug 17, 2007
Ok, so I have some horribly convuluted SQL that I would love to optomize. I'm not happy leaving it in it's current state, that's for sure!
I'm currently working on our test bed servers, so obviously my stats are out because of the "crap-ness" (yes, that's the technical term) of the hardware, but still, it should NEVER need to take this long!!
Basically, the issue arises in the nasty join to the career table (one employee can have multiple career lines). Just to make things complicated, employees can have any number of career records on any given date, these can even be input for future career events. The following SQL picks out the latest-current career date for each employee based on the career_date being <= GetDate() and the date of entry for this date being the greatest.
E.g.
career_date | datetime_created
2009-01-01 | 2006-05-05 13:55:21.000
2007-01-01 | 2006-05-05 13:54:18.000
2007-01-01 | 2006-05-05 13:52:55.000
From the above we want to return
2007-01-01 | 2006-05-05 13:54:18.000
SET STATISTICS IO ON
SET STATISTICS TIME ON
SELECT a.sAMAccountNameAs 'sAMAccountName'
, a.userPrincipalNameAs 'userPrincipalName'
, 'TRUE'As 'Modify'
, RTRIM(e.unique_identifier)As 'employeeID'
, RTRIM(e.employee_number)As 'employeeNumber'
, RTRIM(e.known_as)
+ CASE WHEN RTRIM(e.surname) IS NOT NULL THEN
' ' + RTRIM(e.surname) ELSE NULL ENDAs 'displayName'
, RTRIM(e.known_as)As 'givenName'
, RTRIM(e.surname)As 'sn'
, RTRIM(c.job_title)As 'title'
, RTRIM(c.division)As 'company'
, RTRIM(c.department)As 'department'
, RTRIM(l.description)As 'physicalDeliveryOfficeName'
, RTRIM(REPLACE(am.dn,'\',''))As 'manager'
, t.full_mobile
+ CASE WHEN RTRIM(t.mobile_number) IS NOT NULL THEN
' (DD: ' + RTRIM(t.mobile_number) + ')'ELSE NULL END
As 'mobile'
, t.mobile_numberAs 'otherMobile'
, ad.address_ad_countryAs 'c'
, ad.address_ad_address1
+ CASE WHEN ad.address_ad_address2 IS NOT NULL THEN
', ' + ad.address_ad_address2 ELSE NULL END
+ CASE WHEN ad.address_ad_address3 IS NOT NULL THEN
', ' + ad.address_ad_address3 ELSE NULL END
+ CASE WHEN ad.address_ad_address4 IS NOT NULL THEN
', ' + ad.address_ad_address4 ELSE NULL END
+ CASE WHEN ad.address_ad_address5 IS NOT NULL THEN
', ' + ad.address_ad_address5 ELSE NULL ENDAs 'streetAddress'
, ad.address_ad_poboxAs 'postOfficeBox'
, ad.address_ad_cityAs 'l'
, ad.address_ad_CountyAs 'st'
, ad.address_ad_postcodeAs 'postalCode'
, RTRIM(ad.address_ad_telephone) +
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NOT NULL THEN
' (Ext: ' + RTRIM(a.othertelephone) + ')'
ELSE
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NULL THEN
'Ext: ' + RTRIM(a.othertelephone)
ELSE NULL
END
ENDAs 'telephoneNumber'
FROM employee e
LEFT
JOIN career c
ON c.parent_identifier = e.unique_identifier
AND c.career_date =(
SELECTmax(c2.career_date)
FROMpwa_master.career c2
WHEREc2.parent_identifier = c.parent_identifier
ANDc2.career_date <= GetDate()
)
AND c.datetime_created =(
SELECT max(c3.datetime_created)
FROMpwa_master.career c3
WHEREc3.parent_identifier = c.parent_identifier
ANDc3.career_date = c.career_date
)
LEFT
OUTER
JOIN AD_Import am
ON am.employeeNumber = c.manager_number
INNER
JOIN AD_Import a
ON a.employeeID = e.unique_identifier
LEFT
JOIN AD_Telephone t
ON t.unique_identifier = e.unique_identifier
LEFT
JOIN AD_Address ad
ON ad.address_pwa_location = e.location
LEFT
JOIN xlocat l
ON l.code = c.location
WHERE (a.employeeNumber IS NOT NULL
OR a.employeeID IS NOT NULL)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
(1706 row(s) affected)
Table 'AD_Import'. Scan count 4, logical reads 106, physical reads 0, read-ahead reads 0.
Table 'AD_Address'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0.
Table 'AD_Telephone'. Scan count 2, logical reads 10, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 868, logical reads 956, physical reads 0, read-ahead reads 0.
Table 'xlocat'. Scan count 2, logical reads 8, physical reads 0, read-ahead reads 0.
Table 'career'. Scan count 5088, logical reads 2564843, physical reads 0, read-ahead reads 0.
Table 'people'. Scan count 1697, logical reads 5253, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 826, logical reads 914, physical reads 0, read-ahead reads 0.
SQL Server Execution Times:
CPU time = 15203 ms, elapsed time = 8114 ms.
Any advice on what I can do to optomize?
Oh judt to point out that "employee" is a view on the "Table 'people'."
EDIT: I know it's pointing out the obvious, but I'm pulling out the managers "DN" from AD_Import based on the manager_number and employeeNumber matching.
View 14 Replies
View Related
