I have a procedure that takes database name and queries some tables in the database specified. I am trying to access tables like this:
SELECT COUNT(id) FROM @dbname..sysobjects WHERE type='U'
How can I access the tables while the database name is in a variable.
Thanx.
Firstly I consider myself quite an experienced SQL Server user, andamnow using SQL Server 2005 Express for the main backend of mysoftware.My problem is thus: The boss needs to run reports; I have designedthese reports as SQL procedures, to be executed through an ASPapplication. Basic, and even medium sized (10,000+ records) reportingrun at an acceptable speed, but for anything larger, IIS timeouts andquery timeouts often cause problems.I subsequently came up with the idea that I could reduce processingtimes by up to two-thirds by writing information from eachcalculationstage to a number of tables as the reporting procedure runs..ie. stage 1, write to table xxx1,stage 2 reads table xxx1 and writes to table xxx2,stage 3 reads table xxx2 and writes to table xxx3,etc, etc, etcprocedure read final table, and outputs information.This works wonderfully, EXCEPT that two people can't run the samereport at the same time, because as one procedure creates and writesto table xxx2, the other procedure tries to drop the table, or read atable that has already been dropped....Does anyone have any suggestions about how to get around thisproblem?I have thought about generating the table names dynamically using'sp_execute', but the statement I need to run is far too long(apparently there is a maximum length you can pass to it), and evenbreaking it down into sub-procedures is soooooooooooooooo timeconsuming and inefficient having to format statements as strings(replacing quotes and so on)How can I use multiple tables, or indeed process HUGE procedures,withdynamic table names, or temporary tables?All answers/suggestions/questions gratefully received.Thanks
View 2 Replies View RelatedI'm new to my company, although not new to SQL 2005 and I found something interesting. I don't have an ERD yet, and so I was asking a co-worker what table some data was in, they told me a table that is NOT in SQL Server 2005's list of tables, views or synonyms.
I thought that was strange, and so I searched over and over again and still I couldn't find it. Then I did a select statement the table that Access thinks exists and SQL Server does not show and to my shock, the select statement pulled in data!
So how did this happen? How can I find the object in SSMS folder listing of tables/views or whatever and what am I overlooking?
Thanks,
Keith
Access Connection
create a new Connection Manager by right-clicking in the Connection Managers section of the design area of the screen. Select New OLE DB Connection to bring up the Configure OLE DB Connection Manager dialog box. Click New to open the Connection Manager. In the Provider drop-down list, choose the Microsoft Jet 4.0 OLE DB Provider and click OK.
Browse to the Access database file and connection set up---all good!!!
Dataflow task
Add an OLE DB Source component
Double-click the icon to open the OLE DB Source Editor. Set the OLE DB Connection Manager property to the Connection Manager that I created . Select Table from the Data Access Mode drop-down list.
I cannot see the tables set up as set up as pass-through table types to a Oracle 9i db
Any ideas please help
thanks in advance
Dave
i am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
I am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
Role Loans Payments Transactions Accounts Customer Emplo
Database Admin SUID SUID SUID SUID SUID SUID
Branch Manager SUI SUI SUI SUI SUI SUI
Internal Auditor S S S S S S
Loan Officer SUID SUI SUI S S
Tellers S S S S SU
Customers U
From Newbie to Newbie,
Add reference to:
'Microsoft ActiveX Data Objects 2.8 Library
'Microsoft ADO Ext.2.8 for DDL and Security
'Microsoft Jet and Replication Objects 2.6 Library
--------------------------------------------------------
Imports System.IO
Imports System.IO.File
Code Snippet
'BACKUP DATABASE
Public Shared Sub Restart()
End Sub
'You have to have a BackUps folder included into your release!
Private Sub BackUpDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BackUpDB.Click
Dim addtimestamp As String
Dim f As String
Dim z As String
Dim g As String
Dim Dialogbox1 As New Backupinfo
addtimestamp = Format(Now(), "_MMddyy_HHmm")
z = "C:Program FilesVSoftAppMissNewAppDB.mdb"
g = addtimestamp + ".mdb"
'Add timestamp and .mdb endging to NewAppDB
f = "C:Program FilesVSoftAppMissBackUpsNewAppDB" & g & ""
Try
File.Copy(z, f)
Catch ex As System.Exception
System.Windows.Forms.MessageBox.Show(ex.Message)
End Try
MsgBox("Backup completed succesfully.")
If Dialogbox1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
Code Snippet
'RESTORE DATABASE
Private Sub RestoreDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
RestoreDB.Click
Dim Filename As String
Dim Restart1 As New RestoreRestart
Dim overwrite As Boolean
overwrite = True
Dim xi As String
With OpenFileDialog1
.Filter = "Database files (*.mdb)|*.mdb|" & "All files|*.*"
If .ShowDialog() = Windows.Forms.DialogResult.OK Then
Filename = .FileName
'Strips restored database from the timestamp
xi = "C:Program FilesVSoftAppMissNewAppDB.mdb"
File.Copy(Filename, xi, overwrite)
End If
End With
'Notify user
MsgBox("Data restored successfully")
Restart()
If Restart1.ShowDialog = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'CREATE NEW DATABASE
Private Sub CreateNewDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CreateNewDB.Click
Dim L As New DatabaseEraseWarning
Dim Cat As ADOX.Catalog
Cat = New ADOX.Catalog
Dim Restart2 As New NewDBRestart
If File.Exists("C:Program FilesVSoftAppMissNewAppDB.mdb") Then
If L.ShowDialog() = Windows.Forms.DialogResult.Cancel Then
Exit Sub
Else
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
End If
End If
Cat.Create("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;
Jet OLEDB:Engine Type=5")
Dim Cn As ADODB.Connection
'Dim Cat As ADOX.Catalog
Dim Tablename As ADOX.Table
'Taylor these according to your need - add so many column as you need.
Dim col As ADOX.Column = New ADOX.Column
Dim col1 As ADOX.Column = New ADOX.Column
Dim col2 As ADOX.Column = New ADOX.Column
Dim col3 As ADOX.Column = New ADOX.Column
Dim col4 As ADOX.Column = New ADOX.Column
Dim col5 As ADOX.Column = New ADOX.Column
Dim col6 As ADOX.Column = New ADOX.Column
Dim col7 As ADOX.Column = New ADOX.Column
Dim col8 As ADOX.Column = New ADOX.Column
Cn = New ADODB.Connection
Cat = New ADOX.Catalog
Tablename = New ADOX.Table
'Open the connection
Cn.Open("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;Jet
OLEDB:Engine Type=5")
'Open the Catalog
Cat.ActiveConnection = Cn
'Create the table (you can name it anyway you want)
Tablename.Name = "Table1"
'Taylor according to your need - add so many column as you need. Watch for the DataType!
col.Name = "ID"
col.Type = ADOX.DataTypeEnum.adInteger
col1.Name = "MA"
col1.Type = ADOX.DataTypeEnum.adInteger
col1.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col2.Name = "FName"
col2.Type = ADOX.DataTypeEnum.adVarWChar
col2.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col3.Name = "LName"
col3.Type = ADOX.DataTypeEnum.adVarWChar
col3.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col4.Name = "DOB"
col4.Type = ADOX.DataTypeEnum.adDate
col4.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col5.Name = "Gender"
col5.Type = ADOX.DataTypeEnum.adVarWChar
col5.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col6.Name = "Phone1"
col6.Type = ADOX.DataTypeEnum.adVarWChar
col6.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col7.Name = "Phone2"
col7.Type = ADOX.DataTypeEnum.adVarWChar
col7.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col8.Name = "Notes"
col8.Type = ADOX.DataTypeEnum.adVarWChar
col8.Attributes = ADOX.ColumnAttributesEnum.adColNullable
Tablename.Keys.Append("PrimaryKey", ADOX.KeyTypeEnum.adKeyPrimary, "ID")
'You have to append all your columns you have created above
Tablename.Columns.Append(col)
Tablename.Columns.Append(col1)
Tablename.Columns.Append(col2)
Tablename.Columns.Append(col3)
Tablename.Columns.Append(col4)
Tablename.Columns.Append(col5)
Tablename.Columns.Append(col6)
Tablename.Columns.Append(col7)
Tablename.Columns.Append(col8)
'Append the newly created table to the Tables Collection
Cat.Tables.Append(Tablename)
'User notification )
MsgBox("A new empty database was created successfully")
'clean up objects
Tablename = Nothing
Cat = Nothing
Cn.Close()
Cn = Nothing
'Restart application
If Restart2.ShowDialog() = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'COMPACT DATABASE
Private Sub CompactDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CompactDB.Click
Dim JRO As JRO.JetEngine
JRO = New JRO.JetEngine
'The first source is the original, the second is the compacted database under an other name.
JRO.CompactDatabase("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program
FilesVSoftAppMissNewAppDB.mdb; Jet OLEDB:Engine Type=5", "Provider=Microsoft.Jet.OLEDB.4.0;
Data Source=C:Program FilesVSoftAppMissNewAppDBComp.mdb; JetOLEDB:Engine Type=5")
'Original (not compacted database is deleted)
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
'Compacted database is renamed to the original databas's neme.
Rename("C:Program FilesVSoftAppMissNewAppDBComp.mdb", "C:Program FilesVSoftAppMissNewAppDB.mdb")
'User notification
MsgBox("The database was compacted successfully")
End Sub
End Class
We migrated a MS Access 2003 mdb into MS Access 2007. The mdb has linked tables to SQL Server via a DSN and utilizes a mdw file. In 2003, the username/password is "passed" to SQL Server, so the UID/PWD that is used for opening the mdb, is used in SQL Server.
Opening the same file in 2007 using the same mdw, gives a secondary login on SQL Server.
Is there a way to have MS Access 2007 pass the UID/PWD to SQL Server on linked tables, the same way that 2003 does?
Thanks!
Hi,
To use a searchform with 15 searchfields (the may be null) in my .adp-file, I want to use dynamic sql (code below). Is this possible? How have I to use this code in access?
Can some-one please help me?
I'm working with access 2007 and microsoft sql server 2005 express
CREATE PROCEDURE search_orders_1
@gegevens bit = NULL,
@getekend bit = NULL,
@goedgekeurd bit = NULL,
@productielijst bit = NULL,
@in_productie bit = NULL,
@klaar bit = NULL,
@geleverd bit = NULL,
@gefactureerd bit = NULL,
@dossiernr int = NULL,
@categorie int = NULL,
@klant int = NULL,
@tekenaar int = NULL,
@projectleider int = NULL,
@verm_bedrag int = NULL,
@levertermijn int = NULL,
@debug bit = 0 AS
DECLARE @sql nvarchar(4000),
@paramlist nvarchar(4000)
SELECT @sql=
'SELECT d.dossiers_ID AS dossier, b.naam AS klant, d.werfnaam AS
werf,d.werfadresplaats AS plaats, s.onderdeel, s.hoeveelheid,
s.eenheid, p.naam AS naam_tekenaar, p.voornaam AS
vrnaam_tekenaar,s.leverdatum AS levertermijn
FROM dbo.TBL_PERSONEEL p
RIGHT OUTER JOIN dbo.TBL_DOSSIERS d ON p.personeels_ID = d.tekenaar_JUMA
LEFT OUTER JOIN dbo.TBL_KLANT k ON d.klantnr = k.klantnummer
LEFT OUTER JOIN dbo.TBL_BEDRIJF b ON k.bedrijf_ID = b.bedrijf_ID
LEFT OUTER JOIN dbo.TBL_SUBDOSSIERS s ON d.dossiers_ID = s.dossiers_ID
WHERE 1 = 1'
IF @gegevens IS NOT NULL
SELECT @sql = @sql + ' AND s.gegevens = @xgegevens'
IF @getekend IS NOT NULL
SELECT @sql = @sql + ' AND s.getekend = @xgetekend'
IF @goedgekeurd IS NOT NULL
SELECT @sql = @sql + ' AND s.goedgekeurd = @xgoedgekeurd'
IF @productielijst IS NOT NULL
SELECT @sql = @sql + ' AND s.productielijst = @xproductielijst'
IF @in_productie IS NOT NULL
SELECT @sql = @sql + ' AND s.in_productie = @xin_productie'
IF @klaar IS NOT NULL
SELECT @sql = @sql + ' AND s.klaar = @xklaar'
IF @geleverd IS NOT NULL
SELECT @sql = @sql + ' AND s.geleverd = @xgeleverd'
IF @gefactureerd IS NOT NULL
SELECT @sql = @sql + ' AND d.checkbox_facturatie = @xgefactureerd'
IF @dossiernr IS NOT NULL
SELECT @sql = @sql + ' AND d.dossiers_ID = @xdossiernr'
IF @categorie IS NOT NULL
SELECT @sql = @sql + ' AND s.productcategorie = @xcategorie'
IF @klant IS NOT NULL
SELECT @sql = @sql + ' AND b.bedrijf_ID = @xklant'
IF @tekenaar IS NOT NULL
SELECT @sql = @sql + ' AND d.tekenaar_JUMA = @xtekenaar'
IF @projectleider IS NOT NULL
SELECT @sql = @sql + ' AND d.projectleider_JUMA = @xprojectleider'
IF @verm_bedrag IS NOT NULL
SELECT @sql = @sql + ' AND s.vermoedelijk_bedrag > @xverm_bedrag'
IF @levertermijn IS NOT NULL
SELECT @sql = @sql + ' AND s.leverdatum < CURRENT_DATE() +
@xlevertermijn'
SELECT @sql = @sql+ ' ORDER BY d.dossiers_ID, s.subdossiers_ID'
IF @debug = 1
PRINT @sql
SELECT @paramlist='@xgegevens bit,
@xgetekend bit,
@xgoedgekeurd bit,
@xproductielijst bit,
@xin_productie bit,
@xklaar bit,
@xgeleverd bit,
@xgefactureerd bit,
@xdossiernr int,
@xcategorie int,
@xklant int,
@xtekenaar int,
@xprojectleider int,
@xverm_bedrag int,
@xlevertermijn int'
EXEC sp_executesql @sql, @paramlist,
@gegevens, @getekend, @goedgekeurd, @productielijst,
@in_productie, @klaar, @geleverd, @gefactureerd,
@dossiernr, @categorie, @klant, @tekenaar,
@projectleider, @verm_bedrag, @levertermijn
I developed a database with Access 2003 and everything was working good until my tech came in and reformated my hard drive and install a new Ghost image that met our company standards.
Now I cannot go in and make any changes to any of the tables, queries and forms. All of this started when a new Ghost image was installed on my pc.
The message I get when I try to open my database is "You do not have permission to run "tblSwitchboard." I get the same error message when I try to do anything at all on the database.
I am at a loss as to what to do. Please help.
hello everyone,
Thank you Darrell for your help on my "Firehose" problem.
Well, I have another question for everyone. I have three tables with the same columns: Products, Products_Sold, and Products_StandBy. I have a Stored Procedures that gets the products: Products_Get, Products_Sold_Get, and Products_StandBy_Get. I want to be able to only have one stored procedure that gets from all tables depending on what @Table variable I give it.
I tried the following, but it didn't work:
CREATE Procedure CMRC_Products_Get
@Table
AS
CREATE TABLE #TempTable
(
ProductID int,
Chest nvarchar (50),
ItemSize nvarchar (50)
)
INSERT INTO #TempTable
(
ProductID,
Chest,
ItemSize
)
SELECT
ProductID,
@Table.Chest,
CMRC_WomensSizes.ItemSize
FROM
@Table INNER JOIN
CMRC_WomensSizes ON @Table.Chest = CMRC_WomensSizes.Chest
I get an error message on the line: "@Table.Chest,"
So, my question would now be, how do I go about doing what I'm attempting here? Anybody? Thanks ahead for any help.
Sincerely,
Alec
hi all.
i just want to know if i can create a dynamic table. i mean a table which expands itself based on the requirement.
or a table can only be static???
Cheers!!!
Bel.
Hi
I am quite new to the complexities of MS SQL and have a problem, I would like to resolve. I have 2 tables with a unique identifier in both and want to populate a new table with information from both, but the second table I would like to populate just some fields that have a DOB eg
Table 1:
uniqueId
Name
Address
Table2:
uniqueId
Type
Setting
example of content for Table 2:
uniqueId Type Setting
123 DOB 03/04/74
234 TFN 12345678
567 POA Mr Smith
So the new table needs to be populated with a ll of info in table 1 and has a new field called DOB so only the clients with a DOB should populate this field, if the client in Table 1 has a TFN reference, this record should be added to the new table but no value needs to be entered eg
123 Chris Smith 1 high street 03/04/74
234 Jon brown 2 high terrace <Null>
Cheers
pommoz
dear experts,
i heard in a session, that the tables which are modifying continuously are known as dynamic tables.and which are not are known as static tables.
my question is how to find the statics to judge static and dynamic tables?
Hi:
I'm trying to create an ad-hoc query on a Asp.net page for user. Besides the usual Boolean operators, Field Names, Comparison operators & Field Values, the ad-hoc query also involves multiple tables, eg [Customers] , [Members] & [Orders].
Now I have difficulties on writing a TSQL sp on how to take the dynamic query with different tables under consideration. User might simply query each individual tables (eg, Customers with age > 25) or combination of tables (eg, Membered Customers with Orders Amt > 1000 between 1/1/2005 - 1/31/2005)
I have look up a lot dynamic query on the net but all are with only 1 single table to hit. Could anyone give me a direction on how to write a dynamic query script with multiple tables under consideration? Much appreciated.
ps: The ad-hoc query only contains these defined tables, no other table will be involved.
I would like to do a dynamic audit for the tables ( columns which needs to audited will also change dynamically). For example,
I am having 3 tables, table1 table2 table3
User can select Table 1 ( col 1, col3, col4) and Table2 ( col 3 and col 5).
I want to achieve this functionality without any triggers or output clause, so only one option which is left is "ChangeDataCapture" ( to my knowledge). So i did a small POC. The problem here is, system captures all the field data even though value doesn't change, for example,
TableA
CountryId CountryCode CountryName
1 IND INDIA
Update TableA
Set CountryCode = 'INDI', CountryName = 'INDIA'
Where CountryId = 1
On running the above query, CDC stores the value for both the columns, but i don't want this. I only wanted to store the CountryCode value alone.
CREATE TABLE [dbo].tCountry(
CountryId bigint IDENTITY(1,1) NOT NULL Primary Key,
CountryName [varchar](50) NULL,
CountryCode [varchar](50) NULL,
CreateBy bigint
)
EXEC sys.sp_cdc_enable_db
[code]....
--See here, i want to display CountryName as NULL, because i didnt do any changes in this column
--Why am i asking this bcoz, Frm my front end application, i will send the complete list of columns and the values to the update query.
Select * from cdc.dbo_tCountry_CT Where __$operation in (3,4)
Hi allIn the SP below im (trying to) do some dynamic sql. As you can see the tableto use is set as a variable and the 'exec' method used to run thesqlstatements.My problem is that the 'if exists' method is not doing what i was hoping itcould do.The @presql command returns somewhere between 0 or 50 rows (give and take) -i just want the 'if exists' part to determine if the select statementreturns something or not since i then will have to update a current row - orinsert a new one.Even if there is no rows returned, the 'if exists' command will return true:-/Any suggestions to a different way of approach...?Thanks in advance :-)######## Stored procedure start ########[various @ variables]....declare @presql varchar(200)select @presql = 'SELECT * FROM '+@CurrentDB+' where btsiteID='+cast(@SiteID as varchar(6))+''IF exists((@presql))BEGINdeclare @UpdateSQL varchar(400)set @UpdateSQL = 'UPDATE '+@CurrentDB+' SET btDate='''+cast(@FileDate asvarchar(12))+''''exec(@UpdateSQL)ENDELSEBEGINdeclare @InsertSQL varchar(2000)select @InsertSQL = 'INSERT INTO ' + @CurrentDB + '(btDate,btTime)VALUES('''+ cast(@FileDate as varchar(12)) + ''','+ cast(@ImportTime as varchar(6)) + ')'EXEC(@InsertSQL)END######## Stored procedure end ########
View 2 Replies View RelatedHi,
I have a database with serveral tables, for example 'customer', I want to update this table with a SSIS package. However, to ensure we don't have issues if the update fails then I've put in an intermediate stage
Using an Execute SQL Task I create temporary tables, for example 'customer_tmp'. Data is then imported into these tables. When all the data is imported successfully the original tables are dropped and the temporary tables are renamed, removing the '_tmp'
This works fine and I'm happy with it. However, if someone adds a column to one of the tables in SQL server it is lost on the next upload.
Similarly I have to hard code creating the indexes into the package as well.
Does anyone know how I could copy the original table definitions and create the temporary tables dynamically. So that any new columns would be picked up?
And indeed is it possible to copy the indexes from one table to another before the drop and rename trick?
Thanks in advance.
Iain
Hi, I'm having a problem with my code,I am doing the following - retrieving a field from a table, which is linked to another table, i'm only updating one of the fields in one of the two tables...
Code: ( text )
it seems like i am able to create it. But when i try to access that
temporary table, i get an error "Invalid object".
this is happening only when i try to create local temporary table.
Global temporary table works fine inside the dynamic SQL.
Any Help appreciated.
I need to report on data from several databases on several servers. They are all SQL Server 2005 databases. I am trying to created an Integration Services task to consolidate and transform this data for easy reporting. The problem I am having is one database in particular. It has tables like this:
tblLookupData_Customer1
tblLookupParseData_Customer1
tblLookupData_Customer2
tblLookupParseData_Customer2
tblLookupData_Customer3
tblLookupParseData_Customer3
I want to use only the tables of the form "tblLookupParseData*" for this list. I can do this in Stored Procedures by dynmacally building up the sql query. I cannot find out how to do this in Integration Services. When I make Datasource Views, they seem to expect me to pick from a list of known tables. This list of tables grows as Customers are added to the system.
NOTE: The way the tables are structured was NOT my idea. I hate storing "data" in the structure of the database. Many people also do this when they create "period" tables such as "CustomerData_05_2005". It speeds up writing the data, and querying a specific table, but it is a nightmare for reporting. I cannot change this as it is not in my responsibility.
Hi
I have developed an application in ASP/SQL server 7.
Ths system is single user. One of the tables is updated by usr actions( say Table A).
To make it multi user. I want to create table such as A_Username.
How can query be written for this. Also there are many stored procedures which will access this table. In these stored procedures i will send username as an input. Then the query in the stored procedure shd access the table as A_Username .
Such dynamic table name refrencing , how can it be done.. Is creating a string for the query and then executing it using sp_exec the only option?
pls suggest
How to pass dynamic values in xml path query?
WITH TEST AS (
SELECT TL.TERMINAL_ID,T.IP_ADDRESS, T.LOGICAL_CONNECT_STATUS, SI.SCHEDULER_ID,
SI.INSTRUCTION, SI.GROUP_ID, SI.MAX_READ_RETRIES, SI.DATA_CHAR, SI.SCHEDULE_TYPE,SI.FILEPATH_FLAG,
T.STATION_NAME,T.BANK_ID FROM SCHEDULERINFO SI
INNER JOIN TERMINALGROUP TG ON SI.GROUP_ID = TG.GROUP_ID INNER JOIN TERMINALGROUPLINK TL ON TG.GROUP_ID = TL.GROUP_ID
[Code] ....
I need to pass dynamic values in FOR SCHEDULER_ID COLUMN. Because I have huge data.
I have two dynamic pivot tables that I need to join. The problem I'm running into is that at execution, one is ~7500 characters and the other is ~7000 characters.
I can't set them both up as CTEs and query, the statement gets truncated.
I can't use a temp table because those get dropped when the query finishes.
I can't use a real table because the insert statement gets truncated.
Do I have any other good options, or am I in Spacklesville?
Need to change a Excel report to SSRS.
Excel report has around 15 tables all with different columns.
Is there a way , I can show all data in SSRS by avoiding creation of 15 datasets and 15 tables.
Note -- All 15 tables have differnt columns list.
I have this pivot table (I only post the static version as the problem only regards the single quotes)
SELECT * from(
select DATEPART(year,DeliverydatePackingSlip) as Year,
CASE WHEN DiffPromiseDateFirst < 0 Then '1 - too early'
WHEN DiffPromiseDateFirst = 0 Then '2 - on time'
ELSE '3 - too late' END as Delivery
from iq4bisprocess.FactOTDCustomer
WHERE OTD_Exclusion = 0)a
PIVOT ( COUNT(Year)
For Year
in ([2012],[2013],[2014],[2015])) as pvtNow, packing everything in a string parameter I always stumble over the single quotes. I tried to replace them with CHAR(39), I tried to define a parameter for each occurrence, but always get a syntax error. What am I doing wrong?declare @sql nvarchar(max)
declare @title1 nvarchar(20)
declare @title2 nvarchar(20)
declare @title3 nvarchar(20)
set @title1 = '1 - too early'
set @title2 = '2 - on time'
set @title3 = '3 - too late'
[Code] .....
exec sp_executesql @sqlThis would throw:Msg 102, Level 15, State 1, Line 3 Incorrect syntax near 'early'.
As im diving into my new DBA role and reading as much as I can, I am a little confused on DMV's and system tables.
I've been reading through the book "SQL Server 2005 Bible", which has been very helpful. I tend to use it in conjunction with BOL whenever I come across something I want to learn more.
Last Friday, I tinkered around with DMV's, which was really cool, but I ran into something today that confused me.
Basically, it was finding out the recovery model for all the DB's on the server. The code in the book was:
SELECT [name], recovery_model_desc
FROM sys.databases;
Which turned exactly what it says it will.
however, I am confused.
I initially thought I needed to specify something in the "[name]" section, but realized, that is not the case.
My question is, why is that?
How do I know when to use [] around something?
I found this article:
http://www.databasejournal.com/features/mssql/article.php/3587906
I have been reading it.
I guess I am just really young and raw to T-SQL to know when to use the language corectly.
Is it due to the fact that the rules or syntax is a little different when using system tables?
Hope that makes sense.
Thanks.
TCG
In one query, I would like to query every user table in a specified database for
SELECT TOP (3) COUNT_BIG([Event Count]) AS EventNum, [Target IP], MAX([Time]) as LastSeen
GROUP BY [Target IP]
ORDER BY EventNum DESC
How is this possible?
Please give examples, I am a beginner.
Assume every table has the same structure for columns event count, target ip, and time.
Hi,
I have a requirement to create #Temp table in database and insert values to it.
I use following code:
DbCommand dbCreateTable;
dbCreateTable = provider.CreateCommand();
dbCreateTable.Connection = conn;
dbCreateTable.CommandText ="Create table #MyTemp (Id varchar(10))";
dbCreateTable.ExecuteNonQuery();
string[] insertValues = {"Insert into #Mytemp values ('TestString1')",
"Insert into #Mytemp values ('TestString2')"};
DbCommand dbInsertData = provider.CreateCommand();
dbInsertData.Connection = conn;
foreach (String insertStr in insertValues)
{
dbInsertData.CommandText = insertStr;
dbInsertData.ExecuteNonQuery();
}
Code creates the Temp table but when it comes to insert statement, it throws error saying "Temp table not found".
Reason can be Create and Insert statement gets executed as 2 different sessions.
How to get the above requirement work fine?
Thank you.
HV
I have a scenario, need to create SQL server Tables dynamically.
I Have multiple xml data file on a particular location, and want to load those XML data into sql server tables, but he metadata of each xml data files are not same.
Hence the approach is that,
1. Pick first file from that location
2. Create a table according to that xml data file metada
3. load data on newly created table.
4. Pickup the next xml data files.
5. loop through, till the XML data files are exists on that location.
If I want to disable access to a single table on an SQL server on a periodic basis can anyone tell me how to do it.
Thanks
Still really new at all this, but learning lots thanks to this forum.
I was wondering - is there a way to import Access tables into my SQL Server 2005 ?
(The Data and the Table Design?)
Hi,
We have a SQL server database on remote server. We are using ODBC connection to read and write into the table. But we have another user wants to retrieve(readonly access) our data on his pages. How can we create a user on our database and grant readonly access to that user?
Thanks..
The problem is we need local tables in Access for SubReports (can't use store procedures as record source for this), therefore trying to create temp table and link to Access for each report instance.
When we create the ## type table in tempdb this cannot be linked from Access (cannot be seen via DSN).
The only other option we can find is doing
CREATE TABLE tempdb.dbo.[tablename]
but this requires the user to have admin permissions and therefore be 'dbo' on tempdb and not 'guest'.
Any clues?
Palmy