How To Achieve Partition Parallelism?
Jun 16, 2006
Hi,
Is it possible to achieve partition parallelism in SSIS? What I am asking is, In DataStage, if I load some data like 'data reader -> trans1 -> trans2 -> destination' (and assume that I have 4 nodes configured), the tool divides the data into 4 different datasets and executes the package as 4 instances. This way the data load is very fast. Is it possible in SSIS?
Of course we can divide the dataset and load them thru multiple instances? But then dividing the dataset will differ for every load and so we need to modify the package all the time. Even if we divide the dataset, I am not sure 4 instances will run in 4 different nodes or in a same node? So anybody has any idea about it?
Thanks.
View 4 Replies
ADVERTISEMENT
Jun 20, 2001
Would like to derive a summary report like
WT<=0WT<=10WT<=20WT>20Min WTMax WTAvg WTTotal
---------------------------------------------
2001/06/0101001010101
2001/06/1802006872
from table
RecIDCreateTimeStampWT
----------------------
12001/06/01 08:0010
22001/06/18 08:308
32001/06/18 08:356
Is it possible to dervive the result in a single query? Or separate query needed like the followings :
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, MIN(WT) AS MinWT, MAX(WT) AS MaxWT, AVG(WT) AS AvgWT, COUNT(RecID) AS TotalQ
FROM TAB_Name
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=0'
FROM TAB_Name
WHERE WT <= 0
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=10'
FROM TAB_Name
WHERE (WT > 0 AND WT <= 10)
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
Thanks for all your help in advance,
Ben
View 2 Replies
View Related
Oct 2, 2007
Often when I write a stored procedure, I encounter a situation where
it will be really convenient if I can ignore an error and continue the execution
of next SQL statement, especially when I know what kind of error it will generate.
It's just like the effect of "On Error Resume Next" in VB.
Does anyone have any idea or have some knowledge to share?
I would really appreciate.
I am using SQL Server 2005 and SQL Server 2000. Thanks.
Chris
View 5 Replies
View Related
Apr 22, 2008
I have a flat file source which going to write in a db table. There is lot of warning message, which based on different condition (CSPL) generate different message, which I achieved through lots of conditional split and derived columns dataflow object. My question is can I achieved same functionality by the script task?
Any help will be appreciating.
Thanks
View 3 Replies
View Related
Apr 17, 2008
I have a main report and some subreports.
What i want to achieve is the subreports would be dynamically sent parameters to and the layout would change depending on some
parameters sent from the main report.
So there ia going to be a main report that is constant but the subreports data and layout could change.
Another question is can i have an expression that would hide a subreport if there is no data in the subreport?
Any ideas would be appreciated
View 4 Replies
View Related
Oct 18, 2007
I am looking into various options to improve latency of our application (we figured the latency is mainly because data persistence - writes and reads from DB). I am looking into In-Memory databases also. But, before making that decision (of using in memory databases), I would like to see if there is a way to configure SQL Server 2005 to get as close performance as in-memory databases?
My question:
1. Is there a way that I can configure SQL Server 2005 to use a CACHE that gets loaded as needed basis, so that future database reads/writes will happen to the cache as opposed to disk (db writes)?
2. Is SQL Server 2005 recoverable in such configurations?
3. Are there any ideas/resources where I can get more details? (Such as sample configurations with bench mark numbers, rpevious experiences..etc)
Thanks
Murthy
View 1 Replies
View Related
Apr 5, 2006
Hello All,
I am developing a package using SSIS which needs to do the following.
1. Read all flat file from a folder. I am doing this using For Loop task. I know the total number of files in that folder hence I am setting the loop counter = file count.
2. The next step is to import the data from flat file to SQL server destination table using data flow task.
3. Upon successful completion of data flow task there are some other tasks like SQL to do some checks/validation on the data, export it to another tables.
Upon successful completion of step 3 the iteration goes to next file.
I want to achieve the following
IF step 2 has error (for example corrupt file or incomplete data), I want to fail data transfer completely, skip step 3, and go to step 1 for next available file and do rest.
How do I do this in SSIS?
Thanks for your help.
SGK
View 1 Replies
View Related
Apr 27, 2015
We have two locations in US, I am thinking of having 2 node SQL cluster for Lync 2010, I alardy have One DB server running in one location, now we got new site where we are planning to have one more DB for redundancy.
View 5 Replies
View Related
Apr 20, 2006
I know you can change the max degree parallelism server wide, but can you do it on the fly for one query? I know... trust the query processor but when I turn it off for this one sp, my query goes from 3 seconds to 0 and I got this ex-MS guy in here telling me there is a way, but he does not remember how.
I want him to simplify the sp or have his project's DBA do it, and I even offered to take a hack but.... you know.
View 2 Replies
View Related
Dec 26, 2006
Hi,
I worked with informatica before and bit new to SSIS,
i have one simple question..
How can i achieve the same functionality as External Procedure Transformation (Informatica) in SSIS?
like..i want to use a DLL in my package which contains some set of business rules.
Please let me know.
Charles
View 1 Replies
View Related
Oct 29, 2001
Does anyone know about sqlserver's Parallelism.
a query without parallelism takes much less time as the one with parallelism, in my case it's 6 times faster without parallelism. If that's the true.
What do we need parallelism for?
Any ideas
Thanks
View 2 Replies
View Related
Jul 23, 2005
I have a function that returns a table of information aboutresidential properties. The main input is a property type anda location in grid coordinates. Because I want to get only acertain number of properties, ordered by distance from thelocation, I get the properties from a cursor ordered by distance,and stop when the number is reached. (Not really possible todetermine the distance analytically in advance.) The cursor alsoinvolves joins to a table of grid coordinates vs. postcodes (theproperties are identified mainly by postcode), and to a tablethat maps the input property type into what types to search for.Opening the cursor typically results in the creation of six toeight parallel threads, and takes approx 1 second, which is abouthalf of the total time for the function.Recently the main property table grew from 4 million to 6.5million records, and suddenly the parallelism is lost. Takingthe identical code and executing it as a script gives parallelism.Turning it into a SP that inserts into a #temp table and thenselects * from that table as the last statement also givesparallelism. But when it's in the form of a function, there isonly one thread -- and the execution time has gone from ~2 secto ~8 sec. I updated the statistics on the table, but stillno parallelism.I could turn it into a SP easily enough, but that would involvea change to the C++ program that calls it, which takes a whileto get through the pipeline. In the meantime, is there some wayto induce the optimizer to use parallelism? It used to.
View 3 Replies
View Related
Dec 15, 2006
hi,i've set 'max degree of parallelism' to 1 because some sql request hanged.Now when i connect, how can i set the parallelism to 4 for a session.Is there a command like this :'alter session set max degree of parallelism 4' ?ThanksPaul
View 6 Replies
View Related
Jul 20, 2005
If SQL Server is designed for multi processor systems, how can runninga query in parallel make such a dramatic difference to performance ?We have a reasonably simple query which brings in data from a few nonecomplex views. If we run it on our 2x2.4Ghz Xeon server it takes 6minutes plus to run. If we run this on the same server withOPTION(MAXDOP 1) at the end of the same query it takes less than asecond.Examining the execution plan, the only difference I have been able tosee is that parallelism is taking up 96% of the run time when usingtwo processors. This drops when using the one so a sort takes up thevast majority of the time for the query to run.OK, so running in parallel should mean that it's run in various partsand then 'joined up' later for performance gains, but how can it getit so wrong (timewise) ?If this is the case, will I see a significant difference changing ourserver to use a single processor, which seems completely the wrongapproach (or should I do this on each query in each app - eek) ?Do we have a problem that we don't know about that causes it to takethis long ?What can we do ? Ideally, using both processors would seem to bepreferrable.
View 2 Replies
View Related
Oct 16, 2006
Hi,
I would just like to confirm something with you guys...
Am I correct in saying that you dont need multiple connections to the same DB in a SSIS package in order to achieve parallel processing across multiple SQL tasks. In other words, I have 2 SQL tasks executing different stored procedures on the same DB that I want to run in parallel. They should be able to share one connection and still process in parallel, correct?
With that in mind, would the processing be faster if they each had their own connection?
Thanks in advance.
View 1 Replies
View Related
Mar 16, 2007
after running query at first time working all processes
but later 2-3 sec. working only one
SQL 2005
Hewlett Packard DL580 (16 processes)
What is ideas?
View 6 Replies
View Related
Sep 2, 2015
I have SQL Server Version:-
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64) Jun 28 2012 08:36:30 Copyright (c) Microsoft Corporation Express Edition with Advanced Services (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
This is just an UAT server which has OS and hardware detail below:-
OS :- Windows Server 2008 R2 Standard
SP:- SP1
Processor :- Intel(R) Xeon(R) CPU X5650 @2.67GHz 2.66 GHz
RAM : - 4 GB
Bit - 64 bit
I want to set the value to max degree of parallelism, what value should i configure for the same?
Below is the snap property of SQL instance >> Processor
View 3 Replies
View Related
Jul 23, 2005
We're experiencing a large number of deadlocks since we began runningSQL Server 2000 Enterprise Edition SP3 on a Dell 6650 with hyperthreading intel processors. We don't have the same problem on Dell6650's w/o the hyper threading. If I turn off the parallel queryprocessing option the deadlocks stop. I've tried all of the suggestionsfrom the Microsoft Knowledge Base under the following link -http://support.microsoft.com/?kbid=837983The only suggestion that actually yielded results was turning offparallel query processing but I don't want to give up what should be aperformance advantage if it wasn't for the deadlocks. Query tuning andindex tuning hasn't helped. Any suggestions? I haven't applied SP4yet. I'm wondering if anyone has seen the same problem resolved withSP4.*** Sent via Developersdex http://www.developersdex.com ***
View 4 Replies
View Related
Jul 23, 2005
Hi,I have a sql 2000 server with 8 processors, server settings are asdefault. I read on Technet that it is good practise to remove thehighest no. processors from being used for parallelism, correspondingto the no. of NICs in the server. One of our 3rd party developers hasrecommended only allowing one processor to be used as there is aperformance hit by the server working out which processor to use. Doesanyone have a definitive answer to this? I suspect he's wrong but I'dlike some hard evidence if possible, thanks.Kev.
View 3 Replies
View Related
Jul 7, 2006
Hi,
In my package I have a source, a script component to make some changes to that and a destination. To speed up the process, within a data flow, I have created 6 copies of the above components and running them in parallel. Each source takes different set of data. I have divided the data using the record no such that, each set will read 1million records.
Now, my question is, though each pipleline is supposed to process exactly 1million records, they are not running at the same speed. For example, 1 pipeline completes processing all 1million records whereas another pipeline processed only 250000 records in that time. I don't see any reason for why one should run slow while another is running fast considering that both are doing the same thing?
Do you have any idea about this?
Thanks.
View 6 Replies
View Related
May 6, 2008
Hi,
actually a sever has a parallelism of 4 I would like to set the parallelism for a specific user to 2 without changing the code of the users application.
Is this possible.
As far as I understand with plan guides you just provide sql statements.
Need I to find all queries from the user, and add plan guides for all the queries, or tis there a more elegant way to do it.
br
fari
View 1 Replies
View Related
May 2, 2008
Hi,
can I assign a NAS(Network Attached Storage) server to store the database file(readable and writable) and assign other several MS SQL database servers which will use the same database file in NAS to achieve the objective of high availability?
If it can, how can I set it up in MS SQL Server or it requires another 3rd patry software to set it up?
Thanks.
View 4 Replies
View Related
Oct 26, 2007
Hi,
I need some urgent help on a conceptual question.
Requirement:
I have a simple package with one dataflow task. In that I need to read from a sql table and for every row in that table loop through n times and generate new output rows based on certain conditions (which are best evaluated in custom script as they are rather complex). Hence, if I have 100 rows in the table as my input, I may end up with 100*n rows as output.
My Design:
To implement this I have used an OLE DB Source which outputs to a Script Transform (ST). In the ST I intend to loop through in custom code and generate new rows using the .AddRow feature when I need new rows. This ST then feeds into another OLE DB Destination which writes the data to the table. Simple!
I am using the default buffer settings. All I have tweaked is the Synchronous... property on the script transform (otherwise I do not get to the Output0Buffer within the script!).
Problem:
I wish to do as much as possible in parallel. So I would expect the OLE DB Source to provide more than one row at a time to the script transform and that should process more than one input row simultaneously. It seems the script componenet is serializing input, so it seems to take one row at a time from the OLE DB source, loop through and process in the script transform).
AM I RIGHT IN THINKING THAT THE SCRIPT TRANSFORM IS EXECUTING THE INPUT IN A SEQUENTIAL MANNER?
CAN I PARALLELISE THIS?
If so, how?
Thanks,
Tirthankar
View 3 Replies
View Related
Jun 4, 2015
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
View 3 Replies
View Related
May 7, 2007
Hi All,
I have written ETL software that runs on SQL Server. We are running it for the first time on a 4cpu (2 x dual core) machine on sql server 2005.
One of the things this software does is perform a 'select * from tablename' to validate that the tables passed to it as parameters exist. This has worked fine on previous releases and on single cpu machines because what the optimiser decides to do is to return just the first page of data and then fetch more. I guess it even works in 2005 standard edition.
However, 2005 enterprise edition allows parallelism. And what the optimiser is deciding to do with such a query is to parallelise it and fetch all rows and then give the result back to the program. So, instead of seeing a fraction of a second to return the first page of data we are seeing up to 90 seconds and the database goes and fetches 15M rows in parallel.
Obviously, what we would like to do is to somehow tell the optimiser that this set of programs should not perform any parallel queries. Or, we would like to turn parallelism off on the specific tables we are dealing with for the period of running these ETL programs....they have no need of parallel processing at the database level for virtually all the calls that are performed.
Would someone please be so kind as to advise us if we can do something like pass a parameter to ODBC to stop parallelism or if we can issue commands against specific tables to stop parallelism for a period and then turn it back on?
Thanks in Advance.
Peter Nolan
www.peternolan.com
View 4 Replies
View Related
Sep 1, 2015
I'm currently looking at refactoring an existing, large SSIS 2012 implementation that consists of about 55 projects and 360+ packages. The ETL framework that is in use has a "main" control package that reads from a database table and determines which packages are ready to execute (based on some dependency logic) and then uses an Execute Process task within a loop that calls dtexec with the arguments: /C start Dtexec /SQL "Some Package Path" /SERVER "someserver"
This design allows the loop to execute a package and then immediately iterate because it doesn't wait for the package to respond (aka complete with a failure or success) so it can quickly kick off as many packages are ready to execute. A SQL Agent job is used to call this package every few minutes so that it can pick up any packages that have had their dependencies satisfied since the last execution and kick those off.It's a a clever design but has some problems such as decentralized exception handling (since the parent package is unaware of what is happening in the "asynchronous" dtexec calls.My biggest concern is that by executing packages, not with the Execute Package Task but with the Execute Process Task, and spinning up many dtexecs, the framework is not leveraging SSIS's ability to handle threading, memory consumption, etc. across all running packages and executables because it is simply unaware of them. It's essentially like using an Execute Package Task with the ExecuteOutOfProcess property set to true.
View 6 Replies
View Related
Jun 12, 2015
I have got a question on max degree of parallelism and CPU cores.
If max degree of parallelism = 1, this signifies that sql will use serial execution plan (unless u change it in query level with MAXDOP hint). In serial plan, will the query use all CPU cores (say in my server I have 16 core processors)?
If in serial execution plan only one thread works, then what the other threads doing ? Idle (I may have a defined max server worker thread = 32767(by default)
Unable to create a relationship between this parameters.
View 3 Replies
View Related
Jul 2, 2015
Referencing an article regarding MAXDOP and cost threshold for parallelism from Brent Ozar's website: [URL] .....
We have a 2 physical CPUs that are 4 cores each with hyper threading enabled. When looking through the task manager, under the performance tab, I see 16 CPU threads.We have set the MAXDOP value is set at 4.
Reading further, cost threshold for parallelism setting is recommended at 50 to start with.
Our setting is at the default 5.
View 2 Replies
View Related
May 29, 2008
Depending on the way I write a query, I come up with these 2 stats.
Is there a sure winner in this race, keeping in mind the overall health of the server?
(I'm not sure of the specs of the server, as I can't log on to it :/ but are there any sql variables that would show cpu speed and # of cpus?)
I almost am leaning towards the single cpu query because of lower resources used -
or are most of the "reads" in the parallel'd query not read directly from the HD, but using the Table Spool created internally (query plan shows it)?
CPU Reads Writes Duration
Parallel: 200k 3.2m 2400 62s
Solo: 79k 1.1m 600 79s
View 9 Replies
View Related
May 29, 2014
I am running a query on SQL 2012 Server with the Resource governer setup for my account to have Max DOP option set to 1.
The query still runs in about 1 minute and the execution plan still considers parallelism.
When I explicitly mention the OPTION (MAXDOP 1) , the query runs in 6 seconds.
How can i tell by querying DMV's whether my query is using parallelism or not?
View 2 Replies
View Related
May 2, 2008
We have two db servers running in different datacenters connected through 2 100Mb/s data links. Each db is connected to 12 application servers. The total transaction per day by each application server is between 150K to 200K. Our requirement is to have all application server write to single db on each location. Then these databases are merged into one using replication. So at any given instant db on either datacenter will contain not only entries from its native application server but also from other datacenter. We tried using peer-to-peer replication but it caused severe blocking and few of our application servers crashed. We have to sync each table manually using after production in case we stop distribution agent during production. Is there any easy way to achieve above requirement within SQLServer 2005? Can we eliminate blocking in replication(don't tell me to use snapshot isolation or reducing commitbatchthreshold / commitbatchsize, we have already tried it; blocking is reduce but not eliminated)?
View 2 Replies
View Related
Jul 3, 2014
I right in thinking that if the estimated subtree cost is higher than the cost threshold for parallelism then it will use a parallel plan? If so, I've read the cost threshold is measured in minutes but is the subtree cost measured in something else, the mysterious cost number? And if so, how are the two compared?
View 9 Replies
View Related
Jul 6, 2006
i have a table named table1 sitting on a a partittion scheme px.
table1 is partitioned on u_id by tens,
first partion u_id=0 to 9
second partion u_id=10 to 19
third partion u_id=20 to 29
ans so on and so forth
i have a table named table2 with
records having u_id = 13 to 16
obviously belonging to the second partion.
i want to load table2 to table1 as fast as i could with
the following requirements:
all contents of partition 2 of table1 must be deleted before loading
table2 ceases to exist after the operation
how will i do that.
thanks.
View 1 Replies
View Related
