How To Activate The MSDTC Service?
May 3, 2007
Hello,
As newbie in server country I try a course example to test a distributed transaction accessing both SQL Server 2005 and Sql Server 2005 Express.
But I get an error message saying:
--->MSDTC on server is not available
I Internetted somewhere that MSDTC stands for TransactionManager service.
If I look in the 'Services' list I do not see something like MSDTC, so I think it is not installed or started.
How do I install or activate the MSDTC service?
Thanks in advange,
Henk
View 5 Replies
ADVERTISEMENT
Jan 17, 2000
I just uninstalled SQL 6.5 from my server (Now totally running in 7.0 Mode) and now I can't get the MSDTC service to start again. I get the error "Could not initialize the MS DTC XA transaction manager" (In Application Log)... and error "The MSDTC service terminated with service-specific error 3221229574." (In system log). I believe that somehow MSDTC got uninstalled and I don't know how to reinstall only MSDTC? Any suggestions would be appreciated...
Thanks for any help
View 1 Replies
View Related
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Mar 20, 2007
I've just installed Workgroup Edition for the first time. I have copies on each of two servers, each ordered with five CALs.
My problem is that I don't know how to assign the licenses. I can't find anything in the documentation about it, nothing in the tools menus, and no reference to SQL Server in the Licensing application. The latter really looks like the right place, so if I had to guess, I'd think I've installed something incorrectly. Shouldn't SQL Server appear there as a product?
Of course, I'd also think this would be documented somewhere, but then it's probably one of those things that any idiot would know, so there's no need to explain it.
Once I get past that problem, I'll be setting up eight workstations. I understand from Microsoft Sales that since I've purchased a total of ten CALs, then all eight workstations will be able to access either server. Do I have to do anything special to make that work? Currently, there's no domain. The servers are just members of a workgroup.
Thanks,
Dick
View 1 Replies
View Related
Jun 7, 2006
hi,
I am realy sorry that I am putting this question here since I don't know where to post this question.
We have purchased
Windows server CAL 2003 English OLP NL user CAL
with 5 user license
We got the Microsoft open license agreement after a month or so.
Now I want to know how to proceed with this license.
Since I am newbie to this kindly guide me in this regard.
thanks
View 1 Replies
View Related
Apr 2, 2007
Hi,I have an application (Asp.net + c#).There is a SQL table called 'Status' it is used to store pending and activated events.There is a field called 'Complete'.So when user register I want to add recored to 'Complete' field as 'Pending'But I cant understand how to do this. Plese help me
View 1 Replies
View Related
May 9, 2007
I want to know if there is a way to activate an evaluation version of SQL Server 2005 without re-installing the product completely. Running evaluation in a production environment while waiting on my purchase of Standard edition to be completed. All I have is my Microsoft Open License Order Confirmation.
View 6 Replies
View Related
Feb 17, 2005
is there a way to automate a job to wait on a flag in a directory and to start my maintenance plans ?
if so how would i code is there external functions plz help.
View 8 Replies
View Related
Apr 25, 2008
I have calenders activated in our reports.So, I want only those date values to be enabled for the year I am selecting . Is there any option for that?????
View 1 Replies
View Related
Mar 6, 2008
Hey guys I'm baffled. I've installed SSRS on our IIS server and referenced it to our SQL Server (remote server) but, I'm getting the Reporting Services Error:
The report server installation is not initialized. Check the documentation for more information. (rsReportServerNotActivated)
-2147159550
I've tried rsactivate from both 'Start>Run' and from the command prompt. In both cases the command rsactivate is not a recognized command, executable program or batch file...yadda yadda yadda.
What am I doing wrong and what do I do to fix this??
Thanks,
Jim
View 1 Replies
View Related
Mar 26, 2007
hello all
i need to execute a ssis(sql 2005 integration service) on a document document library . can you people help me out how i can do it
i want to make a work flow which initiate when new document upload in a moss document library and this work flow pass the document to a ssis package and initiate that ssis package
note: the database and moss servers are on different machine
please reply ASAP if there any way to do it.
thnaks
View 7 Replies
View Related
Jul 28, 2000
Is it true that you only have one instance of MSDTC on an active/active Cluster SQL configuration?
All the installations I have seen so far will only allow the MSDTC resource to be under on resource group (usually one of the SQL groups...
Can you all that have worked with cluster respond.
View 2 Replies
View Related
Apr 21, 2004
Trying to locate information on MSDTC. Is this "needed" to run SQL Server? That is, if this part of the installation is deleted, will SQL Server still function? Also, does anyone know if this is a crucial tool needed by Veritas Volume Manager or Windows Disk Manager?
If anyone knows of a link to this information, I'd appreciate it. My searches come up with lots on information on MSDTC, but nothing that answers my specific questions.
Thanks for your time.
View 1 Replies
View Related
Mar 21, 2006
When i do a BEGIN TRAN to a SQL server sitting on Windows 2003 Server from a SQL Server Sitting on Windows 2000 Server,
the Transaction hangs and if I try o kill it the Transaction is in ROLLBACK State.
I tried setting the Properties for the MSDTC and restarted the Windows 2003 Server but in vain
It still hangs
Did any one come across this problem?
Thx
View 1 Replies
View Related
Oct 16, 2006
I keep getting this error on my application server...what does it mean?The description for Event ID ( 0 ) in Source ( ODBC ) cannot be found.The local computer may not have the necessary registry information ormessage DLL files to display messages from a remote computer. Thefollowing information is part of the event: Failed to enlist in DTC:SQL state 37000, native error 8501, error message [Microsoft][ODBC SQLServer Driver][SQL Server]MSDTC on server 'PROSQL' is unavailable..any help would be appreciated...thanks-Jim
View 1 Replies
View Related
Jul 20, 2005
I'm using msde. On the little icon in task tray, you have under currentservice, a choice of mssqlserver, and another choice is msdtc. What ismsdtc? And what is sqlserver agent?
View 1 Replies
View Related
Aug 20, 2007
The resource msdtc is down. Every time, it works pretty well , after we restart the servers(node1 and node2). But, about half a hour later, the problem is there. We reintalled msdtc. It didn't work out too. msdtc and sql server is on a cluster. Can anyone help me out?
View 1 Replies
View Related
Oct 6, 2006
Hi,
I am running SQl 7.0 (SP4) on Windows XP Professional (SP2). Whenever I try an insert/update type of activity, the System returns the following message :
Server: Msg 8501, Level 16, State 3, Line 2
MSDTC on server 'SERVER' is unavailable.
However, all the required services including MSDTC are running on the System.
Please help ASAP.
Thanks & Regards - Rajesh Pathak
View 3 Replies
View Related
Nov 3, 2006
I have a class that use a TransactionScope object for make make two operations into a database. The problem is that in a computer works well but in another I receive a error message: "MSDTC is not running in .SQLEXPRESS". I had watched the services in the computer and the "Microsoft Distributed Transaction Coordinator" is running.
Does somebody know what is happening?
Thankyou and sorry for my English.
View 2 Replies
View Related
Nov 4, 2003
I am selectively insert data from serverA databaseX to serverB databaseX.
(serverA is linked server on B.)
I could insert parent and child tables. But get error when insert to grand-child tables:
Server: Msg 8501, Level 16, State 3, Line1
MSDTC on server B is unavailable.
Don't think I need to turn on MSDTC on B. But I could copy and paste from source A server to target B server. Confusing on some table could insert while others with error....
thanks
-D
View 2 Replies
View Related
Dec 14, 2004
I have an ugent situation. Due to a failure we had to build a new db server for an application and this was done succuessfully. The application requires DTC and it was not intalled when we install SQL on the server.
How do I install DTC? Did I miss an obscure option during SQL install?
Sidney Ives
Database Administrator
Sentara Healthcare
View 2 Replies
View Related
Apr 12, 2004
Hi,
I recently moved & upgraded a database from 7.0 to 2000 that makes use of linked servers. After upgrading, a number of queries started failing with the error below. These linked servers with this problem either had a stopped MSDTC or were behind a firewall. I've read the articles on how to configure MSDTC to work through a firewall, but before I do this I'm wondering why this is even happening. There were no problems when the database was at SQL 7.0. Does anyone know why sql 2000 would need to use MSDTC, but SQL7.0 would not? I don't need to use a distributed transaction, so ideally I'd like to somehow tell SQL not to use MSDTC at all. Any ideas?
Thanks
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
View 2 Replies
View Related
Jul 20, 2005
The following code:DECLARE @tsql varchar(1000)CREATE TABLE #Test (...)SET @tsql = 'SELECT * FROM OPENQUERY(MyDataSource, ...)'INSERT INTO #Test EXEC(@tsql)generates the following error message at the insert statement:Server: Msg 8501, Level 16, State 3, Line 4MSDTC on server 'MyComputer' is unavailable.Why?Thanks,Tony PerovicCompumation, Inc.
View 2 Replies
View Related
May 4, 2007
I have a SSIS package in which there are lot of Sequence Containers. Each sequence container has two Execute Sql tasks which brings 2 values, and if the comparison of the value is true, it runs a data flow task. Comparison is done using Expression.
If any of the sequence container fails the comparison, I wanted whole package to rollback so I had to use Transactions. I set "Required Transaction" on the package and "Supports Transaction" on each Sequence Container and Tasks respectively.
Now that I am trying to run the package, it runs few sequence containers fine and on few it gives this error.
[Execute SQL Task] Error: Executing the query "SELECT ISNULL(MAX(ClaimBillTypeKey), -1) ClaimBillTypeKey FROM dbo.Dim_ClaimBillType" failed with the following error: "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Also, this is not consistent, one time one Seq. Cont will fail and next time it will run fine but something else will fail. What is going on????
View 2 Replies
View Related
Feb 3, 2008
Hi all,
I have set up two server and also created linked server between server1 to server2
I could select from there just fine but when i try to run tirgger on table server1 which updates in server2 it gives me error following:
OLE DB provider "SQLNCLI" for linked server "Server2" return message "No Transaction is active"
MSG 7391, level 16, state 2, Procedure servertrigger, line 34
the operation could not be performed because OLE DB provider "SQLNCLI" for linked sever "SErver2" was unbale to begin a distributed transaction.
I have configured on both server exactly same:
with all the option:
MSDTC > Security Configuration:
Network DTC Access > TRUE
Allow Remote Clients > TRUE
Allow Remote Administration > TRUE
Allow Inbound > TRUE
Allow Outbound > TRUE
Mutual Authentication Required > TRUE
Enable Transaction Internet Protocol (TIP) Transactions > TRUE
Enable XA Transactions > TRUE
Account: NT AuthorityNetworkService
on both server..
On server2 i tried remote proc trans to on and off but it did not help.
What am i missing please Help!!!!!!!
View 1 Replies
View Related
Mar 18, 2008
Hi,
We got this error frequently "
Commit of internal MSDTC transaction failed: Result Code = 0x8004d019
How to solve this issues.
Regards,
S.Balavenkatesh
View 1 Replies
View Related
Oct 19, 2006
Hi all
I got the error below after run the query:
INSERT TABLE1 -- ran at SERVER1
EXEC [SERVER2].DB2.dbo.spInformation
@VR_STARTSHIFT = '10/10/2006 06:00:00',
@VR_INCDATE = '10/10/2006 14:00:00',
@VR_STATION_ID = 221
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
Server1 has a linked server to Server2 (this linked server is working because i can run the SP without the insert).
The Server1 is under WIN2K Server and Sever2 is under WIN2003
The MSDTC is installed and is running in both servers.
How can I fix that?
Thanks in advance
Manuel Rodrigues
View 2 Replies
View Related
Oct 22, 2007
hi all....active/active. windows 2003 sp2. two nodes. two instances, each on a separate virtual server. my msdtc resource is in the cluster group. when i have the cluster group on one node, the sql instance that is running on the other node can't see DTC. Makes sense since the service is not up, but is this a problem? Seems strange to have a red stop sign on my dtc icon in sql management studio. I suppose I won't be able to run Distributed Transactions on that node, which kinda stinks. Wondering if anyone has seen a workaround.
View 3 Replies
View Related
Sep 26, 2007
I have setup a trigger to update records on a linked server, the link works fine and I can query tables on the remote server. However when my trigger activates I get the following error
The operation could not be performed because OLE DB provider SQLNCLI for linked server "NHS" was unable to begin a distributed transaction.
OLE DB provider SQLNCLI for linked server "NHS" returned message
"No transaction is active"
I've followed a microsoft KB article and installed MSDTC on both servers, what else do I need to do?
Thanks
View 20 Replies
View Related
Aug 28, 2006
HelloI had a question reagrding MSDTC usage. I know that MSDTC will enlisteach connection transactions as it's own (take ownership) andcommit/abort accordingly.However I'm not sure what would happen where I have a stored proc withinput parameters and 2 Delete commands on 2 different tables. In thiscase, would MSDTC also enforce ACID rules when 1 cmd succeeds and 2ndaborts ? In the script for the Stored Proc, there is no checking for@@ERROR value. There are just DELETE statement and a plain RETURN.thanksSunit
View 1 Replies
View Related
Aug 9, 2006
Today we installed on MS Cluster (W2k3) and SQL Server 2000 a MSDTC Service. The installation was succesfull, but wenn we try to move the group, then it failed. Because we have only 2 Disks on the cluster one for the Quorum, the other for the Sql Server. We installed the MSDTC as a Resource on the Quorum Disk. The other Thing, wenn we start the firts node all is running on the first node, but we cannot move. Wenn we start the second node all is running on the second node, but we cannot move the Group which contain the Msdtc resource.
Who has a solution to this problem??
Thanks to all
View 1 Replies
View Related
Apr 10, 2007
High level question: Is there a way to rollback a transaction without failing a task?
Here's the scenario:
A single foreach loop contains a sequence container. The sequence container has its TransactionOption set to "Required." All activity happens within the sequence container. This is so that each iteration of the foreach loop is in its own transaction space. Now the catch. In the sequence container I run a few tasks, but more importantly, at the end (final task before the next foreach iteration) I run a Script Task to compare the values of two variables to see if they match. If they do, then all is well; move onto the next iteration. If they don't (and this is where my problem lies), then I need to roll back the current transaction without halting the foreach loop's iterations.
Is the best idea/approach to increase the value of MaximumErrorCount for the parent/package and set the Dts.TaskResult to Dts.Results.Failure, or is there a way in the script task that I can roll back the transaction and set Dts.TaskResult = Dts.Results.Success??
Thanks,
Phil
View 5 Replies
View Related
May 12, 2006
Simultneous transactions of parallel packages not functioning.
The following error ocurs:
* The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction
with error 0x8004D00A "Unable to enlist in the transaction.".
* The AcquireConnection method call to the connection manager "<connection manager name>"
failed with error code 0xC0202009.
* Aborting the current distributed transaction.
The packages work fine when they are executed separately or without transactions, but
when the TransactionOption of the parent package is set to "Required", and all the
containers in the package are set to "Supported".
I guess the problem is with distributed transaction, but not able to resolve. Please
suggest a solution if someone has come across the same problem.
Thanks in Advance
!!!
View 2 Replies
View Related
