Just like in DTS where we can add error file so that if the DTS package fails we can see what caused the DTS to fail, likewise do we have anything like error logging file in SSIS. I greatly appreciate your help on this. thanks!!
View 1 RepliesAfter logging is configured in SSIS package, it seems that after each execution the output is appended to the log file (we are talking about log provider for text files in this case). As a result the file just keeps on growing. I would like to overwrite old information with each run, but I can't find where to configure this. Anybody knows?
Thank you!
Hi
I am trying to use a conditional split task so that I can check for specific fields. If the value doesn't exist I am piping the records to a derived field task, where I add an error. I then try to send these records to a flat file destination so that I can keep track of them. However, when I execute the SSIS data flow task I get the following error
[Log Invalid Records [5496]] Warning: The process cannot access the file because it is being used by another process.
This file isn't being used by any other process as far as I can tell, and the only process using it is the SSIS task trying to write to it.
If anyone has any ideas, then I would really really appreciate it
Thanks
Darrell
I click on menu item SSIS and enable logging to my SQL Database (SSIS log provider for SQL Server). When I run the package it runs fine for the first time. Upon subsequent runs I get the following error.
[Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "There is already an object named 'sysdtslog90' in the database.".
It seems like I need to drop the table every time to avoid this error. Is there a way I can log all package logs to single table historically? Any weblink or tip is appreciated.
Thanks!
Palak Mody
Hey Everyone,
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried:
1) Set every column in the source flat file on error to: Redirect Row
2) Added a Script Transformation to pull the description and the record id out of the offending row
3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found.
[Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Any Ideas?
Matt
I recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies View RelatedHi:
Just implemented logging on my package, and the type of logging is to a text file. Any ideas on where should i store my log folder/file, so when I do my build and deploy, I end up moving the folder as well. Do I have to manually do that? How would that work? What if I save the log file outside of my project folder? Where is the log folder/file path specified? Thanks.
I am executing the SSIS package and generating the execution log information in SQL server and text file.
i.e. using the SSIS---->logging and there SSIS log provider for SQL server and SSIS log provider for text file.
Now I want to push the execution information of all the events in SQL server whereas in text file I want to log only the OnError events.
Now I am unable to to select the different set of the events for two log provider (SQL server and text file)
Please suggest how to do this.
Logging in SSIS as compared to DTS is more complex to set up with so many events. What events should I choose if I need something similar to DTS package logging i.e. I simply want to see which tasks executed at what time and whether they failed or succeded and if they failed, what was the error?
View 10 Replies View RelatedHi,
I have migrated DTS package into SSIS. One of the ActiveX Script contains the following code. I have a question regarding changing this code.
What is the equilaent object of reading LogFileName in SSIS? I setup the Logging in SSIS, but didn't fidn any option using which i can refer to logfile as it is done in the following DTS code.
It'll be a great help if somebody can assist me in this.
Thanks in advance.
Neetu
Code:
Function Main()
Const ForReading = 1, ForWriting = 2, ForAppending = 8
dim fso
dim pkg
dim filename
dim srcfile, logfile
dim inchar
set fso = CreateObject("Scripting.FileSystemObject")
set pkg = DTSGlobalVariables.parent
set logfile = fso.OpenTextFile(DTSGlobalVariables.parent.Properties("LogFileName").Value, ForAppending, True)
filename = Pkg.Connections("CARSBalance").Properties("DataSource").Value
If (fso.FileExists(filename)) Then
set srcfile = fso.OpenTextFile(filename, ForAppending)
' Add a blank character to the file.
srcfile.Write " "
srcfile.Close
set srcfile = fso.OpenTextFile(filename, ForReading)
'Read a line from the source file
inchar = srcfile.Readline
If Len(inchar) <= 1 then
'Have to close the file, then open ForWriting
srcfile.Close
logfile.WriteLine ("File is empty: " & filename)
logfile.WriteLine ("Adding dummy record")
set srcfile = fso.OpenTextFile(filename, ForWriting)
srcfile.WriteLine(" ")
End If
Main = DTSTaskExecResult_Success
srcfile.Close
Else
logfile.WriteLine
logfile.WriteLine ("$$$$$$$$$$$$$ File does not exist: " + filename + " $$$$$$$$$$$$$")
logfile.WriteLine
SuccessReturncode = -1
Main = DTSTaskExecResult_Failure
End If
logfile.Close
End Function
Hi,
My job is to create an audit report. I have two tables A and B which is linked through a common field Id.
if Id column of A table doesnot find value for Field1 in B for the corresponding Id then an error should be reported as follows:
"Missing record in B"
if Id column of A finds value for Field1 but Field2 doesnot have value then warning should be generated.
These Errors and warnings should be logged in Audit Report file.
Can any one guide me how to do it?
Anyone know if there is a way to make the package only log errors? I only have errors checked, but it still logs the package onstart and onend events. Is there a way to turn this off?
Thanks
What all would need to be done in order to capture a time that an SSIS package ran and completed? I have had a thread about this before here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1310953&SiteID=1
But, I have been busy and have been off and on with this issue. I really need to find some simple way to show in a report using SSRS the "as-of" date when the data was pulled in. Is using the Execute SQL task going to be that method?
Any information is greatly appreciated.
Thanks
Second time around w/this one. I'm running my sqlserveragent with a domain admin account and everything works well. I then switch to a domain user and the package fails. Windows app log contains ths
Package "Package1" failed.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
So I go to the sql server agent jobs and select the job I'm trying to run. I then go to Job Step Properties and under the logging tab choose SSIS log provider for Text files. What is supposed to go in the Configuration String?
It will let me type a text file in there or choose from one of my "3" datasources in my package. But since I'm developing this on another machine the choice to log to the file system makes no sense.
Please do not refer me to the kb article (http://support.microsoft.com/?kbid=918760) I've read and re-read that. All that I want to do is find out why the package is failing.
Thanks.
Hi,
What SSIS logging option should I check to log the success of each component? In log file, I'd like to see what component is currently SSIS executing and what component(s) passed the execution.
Thanks
Hello Everyone,
I have written a custom task which writes the details of an error in the windows event log.
I use the on error event to invoke this task.
To simulate the error I try to convert a string into a number. I see that there are multiple as many as 6 messges with different error codes being logged into the windows event log.
They vary from something tangible like number conversion failed to obsure things like thread was being aborted.
Is this normal? to see multiple messages for one type of error.
Can I control this, so that only one message is sent into the windows event log.
(reason is that we have a monitoring software which may raise multiple admin alerts for the same issue).
Thanks for your help in advance.
regards,
Abhishek.
I'm trying to use the information logged by SSIS packages into the database (the sysdtslog90 table) to track errors. Unfortunately, when the errors are written to the log they are associated with a source and sourceid and not the package and package ID. Sometimes the source is the package, but often it is a process within the package. All I need is some way to associate each error with a package--a package name/ID on each row in the log. This seems like it ought to be a pretty basic need, but I can't figure it out.
Your help is greatly appreciated.
devin
When running SSIS packages, the package execution information is logged in the SYSDTSLOG90 table which contains the following columns.
id
event
computer
operator
source
sourceid
executionid
starttime
endtime
datacode
databytes
message
After executing a package, I found that the values in the "executionid" column are the only ones that are unique. Can we use this to determine what package was run? We are trying to architect a solution that would allow us to determine as to how long a package ran, if it ran into warnings / errors etc., We can easily accomplish this by having our own table and using Global variables within packages, we could insert / update this table. Appreciate any help.
Hi,
Can anyone tell me the best way in SSIS to log performance at control flow level i.e. per task I have in my control flow and what performance characteristics it is possible to log.
Thanks in advance
Hi
I want to have logging enabled for my SSIS package and have the logs wriiten to an log in the event viewer.
How can I do it.
Thanks
Sai
I am having a problem where duplicate log statements are being written to a log file (as defined by a log provider).
I believe that this is because in the logging dialog box, I have ticked the checkbox next to a child task to override the logging functionality.
I need to do this because it is a script task and I want to capture "ScriptTaskLogEntry" events (something that I cannot do at the parent level).
However by doing this I seem to get the script events written at the parent, as well as at the Script Task level.
Is there any way of avoiding this, but still capturing the log events from the script task?
Another issue that is possibly linked is that I am getting an error from the log provider:
The SSIS logging provider "SSIS log provider for Text files" failed with error code 0x800700EA ((null)). This indicates a logging error attributable to the specified log provider.
Could this be because of the parent and child task are both attempting to write to the same log provider?
Thanks in advance
Hi. I've tried several things to log some information inside of the ScriptTask. I've tried Console.WriteLine(), Debug.WriteLine(), and Dts.Log().
All compile and work, but my problem is I can't find the output to save my life.
I have logging turned on in my SSIS package, but the data doesn't show up in that file. I've check SQL Server's log. Event Log in OS. All no luck.
Please help.
I am currently using the SSIS Logging feature in my SSIS package. Currently, I have defined a destination log file, and each time the package is executed the log file gets appended with that days log.
Im trying to figure out how best to keep the log file name static (it gets emailed out, and my email client looks for a particular log file name) yet include only todays log information and append the rest of the log information to a history log file or something like that.
Has anyone tried doing something similar, or have any ideas on how best this can be accomplished?
Thanks
I am currently working to write a progress log for my SSIS packages. So far I am able write a new log entry, update this log entry using OnProgress and OnError Event Handlers. I'd like to take it one step further. Whenever the package ends whether cancelled or finished normally; I'd like to write to my logging table COMPLETED_ABNORMALLY on cancelled or COMPLETED_NORMALLY on a normal finish of the package. I'm not sure where to begin with this process. I'd like to utilize a simple method and event handler.
View 0 Replies View Related
Hi,
I have enabled logging in my package and am using sql table to capture. i have defined a connection for it and i have defined it in the logging option. Once the logging is enabled, using package configurations, i am storing the value for the property "logging mode= 1", which means enabled in the table. But when i close and reopen the package, the package is failing to enable the logging. Even though i have stored the logging mode value in the configurations table, it is not getting enabled. Please help me solve this.
Workaround i have tried is declaring a variable explicitly to store the logging mode value and use it in the expressions of the pkg to define the logging mode. This variable is saved in the configuration table. This way works. but i want to know why it is not working with loggingmode value reading directly from configuration entries.
Vivek S
Has anyone attempted (with success) to capture the sql command text from SSIS packages at runtime for logging?
What approach was used?
ProjectREAL used a stored proc to execute all sql statements.
This seemed rather poor in design (formulate a string to pass to the sp just to log the sql command text).
This especially seemed problematic as the stored proc would have to be on the source system.
I have been trying to store my sql in variables which were set to eval as expressions and was hoping to use an ExecuteSQL task in the PreExecute event handler for each task, source, transform or destination which I required logging of the sql command text.
Problem is that, depending on how the expression is formulated (with coding parameter markers or replacing parameter's markers with values) I might only get the pre-parameter replacement version of the sql command text rather than the final parameter replaced sql command text. Also not sure that this design would work with destinations.
Any tricks of the trade to share?
We have a package that has a connection called Load_DimItem.trc. We don't need this logging enabled for this package anymore. However, if I delete the connection, and delete the log provider (SSIS log provider for SQL profiler), I get errors when trying to close the package after debugging. I get: "Cannot detach from one or more processes. [3172] The object invoked has disconnected from its clients."
How can I get rid of this error?
Hi
I'vo got some trouble with the built-in logging feature and a self defined logging table.
Scenario :
A have a SSIS-package with enabled built-in logging to SQL-Server Data-Provider.
At the start of the package, i have an SQL Task which logs
the System Variable system::ExecutionInstanceGUID into the self defined logging table.
But the execution_id which the built-in logging stores to sysdtslog90 isn't the same
value like the value of the system::ExecutionInstanceGUID,
so i can't link my own table with the sysdtslog90 - table.
Any Ideas what is going wrong?
Thanks and sorry about my english
Ivo Becker (Switzerland)
I ma having a package having 10 DFT Task.In Each DFT Task there are odd number of insert and update at the end
for example.
source>lookup>lookup1>lookup2>transformation>conditionalsplit>
1 New CurrYearMinus4 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 4) && ISNULL(Run_Id)
2 New CurrYearMinus3 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 3) && ISNULL(Run_Id)
3 New CurrYearMinus2 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 2) && ISNULL(Run_Id)
4 New CurrYearMinus1 YEAR(ScheduleDepartDate) == (@[User::CurrentYear] - 1) && ISNULL(Run_Id)
[code]....
Hi,
I've created SQL Server job that executes my IS package in regular schedule, is there a way to redirect IS logging (Progress tab when the package is executed from VS) to flat file in same path as my packge.
When my job fails I want to know wich particular step fail and progress tab olso contain usefull info like the duration for each step.
Thank very much for your help
Can someone tell me if SQL server logs individual inserts when copying from Flat File to OLE DB Destination? If so, can this be turned off?
ULTIMATELY, I would like to use a Bulk Insert task, but it looks like it is pretty specific to a single DB and a single table in the DB. I would like the Bulk Insert task to be generic enough to where I can specify (via Parameters) the DB and table for the Bulk Insert because this task will be performed in an iteration of many different flat files.
Sorry I never seem to have a "simple" question. My DBA is breathing down my neck here..
Hello all,
I have a big stored procedure which is going to alter many tables,insert data, basically lot of changes.
So, i want to have a text file (or) any log file which will display, what all the changes does the stored procedure has done ( They dont want profiler output )
Can anybody know how to log the results of execution of stored procedure to a text file.
Thanks.
Hi All,
I am reading multiple XML file and i am using for each loop to get file name. these xml files are create by other process.
If file is in use then i will get following error .
[Read XML file] Error: The component "Read XML file"
was unable to process the XML data. There is an unclosed literal string. Line 1300, position 26.
i know that this error is coming because file is under process but i want to skip reading file which is reurning error. i don't want to read any data from this file.
In Data flow task i am using following steps
1. Reading file through XML Source
2. inserting data through script component task.
Would you please help me?
Thanks in advance..
From
Manish Jain