Hi Everyone,
In the data flow task, i have done a group by and now i have a single row.... I want to assign the value in this row to a package variable.... Without using the script component .......Any suggestions ??
Regards,
Manu
Hi:
In the derived column transformation editor, I have a Derived column name called FileGroupID. I would like to pass in a value for this column from a variable that I have set earlier in the scope. Can someone let me know, how to write the expression that does that and where do I specifiy that expression. I am thinking its the expression field in the derived column transformation editor. My main question is how to actually write the expression, what is the syntax to pull the variable value? Thanks.
MA2005
hi,
I have an aggregate transformation in a dataflow task.
It has only 1 output value.
I'm trying to assign this value to a user variable, but I can't figure out how to do that.
i can hack something silly together - like write the value to the db, and then get it out, but I there has to be an easier way..
Thanks a lot.!
Hello All,
I have a user variable , say max_id, which retrieves the max id from a primary key column of a table.
now in Data Flow Task, I have a Derived Column where I am creating a new column which will have the values max_id + 1 for the first record, then max_id + 2 for the second record of the derived column and so on..
and then I am mapping this derived column with that primary key column of the table, so that the new id's are different than the old ones which are already in the table, so there wont be any primary key violation.
I cannot make that primary key column as an Identity column.
my question is how do I increment this max_id user variable everytime ?
Regards,
Kapadia Shalin P.
In my control flow, I have a container which contains an Execute SQL Task, and then upon success, a Data Flow Task. The SQL Task truncates my datamart table. In the data flow task, I execute a stored procedure (through a variable) that populates that same datamart table. I can execute the stored procedure's select statement in Management Studio with no problems in about ten seconds. However, in the SSIS package, the SQL task completes successfully, and then it hangs indefinitely on the data flow step. In the Data Flow tab, none of the boxes are even turning yellow. Why won't it complete? When I move the Exec SQL Task to another container, the package executes fine, but it should be in the Load Phase container.
View 1 Replies View RelatedHi
Is there any task which helps up to update data inside the data flow task or any method to do the same.....
In my Script Component properties I have included "ClientReportGroupId" as a ReadWrite variable. This variable is declared as a Package Variable.
View 23 Replies View RelatedHi, this is my first post and I'm relatively new to SSIS so please go easy on me.
Without going into too much detail about it, I've set up a simple SSIS package which does this in a nutshell:
Foreach loop picks up all *.xls files in a given folder
1 - Puts the name of the current spreadsheet into a variable
2 - File System Task copies the current spreadsheet ("abc.xls") to a file called "work.xls"
3 - Data Flow task performs data extraction on "work.xls" and puts it into a SQL server database
4 - File System Task moves "abc.xls" into a "success" folder
Continues with loop - move onto next spreadsheet
This works fine, so long as the spreadsheets all have the same number of columns.
As soon as one of them has a column missing (believe me, this will happen - we're dealing with users here) the package falls over at step 3.
When the package comes across an erroneous spreadsheet, what I'd like to do is move the offending file to a failure folder (making step 4 either a success or failure file move) and carry on with the next one.
I know that you can have an error path (the red line) from any step within the dataflow task, but this doesn't help me because the error lies in the structure of the spreadsheet and not the contents.
I've already come up with a work around whereby each file is moved into the failures folder just after step 2, then moved from the failures folder into the success folder at step 4.
This almost gives me what I want, although of course the package still falls over whenever it encounters a dodgy looking spreadsheet.
Is there any way that I can get the package to do what I'm after?
Many thanks,
Simon
I have a Data Flow Script Component(Destination Type) and in the properties I have a read/write variable called User::giRowCount
User::giRowCount is populated by a Row Count Component previously in the Data Flow.
After reading http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=97494&SiteID=1 it is very clear that you can actually only use variables in the PostExecute of a Data Flow Script Component or you will get an error
"Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute."
What I need to do is actually create a file in the PreExecute and write the number of records = User::giRowCount as second line as part of the header, I also need to parse a read/write variable such as gsFilename to save me hardcoding the path
(Me.Variables.gsFilename.ToString),(Me.Variables.giRowCount.ToString)
-they must go in the PreExecute sub --workarounds please-here is the complete script component that creates a file with header, data and trailer --Is there any workaround
Thanks in advance Dave
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports System.Text
Imports System.Configuration
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
'Dim fs As FileStream
Dim fileName As String = "F:FilePickUpMyfilename.csv"
'Dim fileName = (Me.Variables.gsFilename.ToString)
Dim myFile As FileInfo = New FileInfo(fileName)
Dim sw As StreamWriter = myFile.CreateText
Dim sbRecord As StringBuilder = New StringBuilder
Public Overrides Sub PreExecute()
sbRecord.Append("RECORD_START").Append(vbNewLine)
End Sub
Public Overrides Sub ParsedInput_ProcessInputRow(ByVal Row As ParsedInputBuffer)
sbRecord.Append(Row.ProjectID.ToString)
sbRecord.Append(Row.TransactionRefNum.ToString)
sbRecord.Append(Row.BillToCustomerNum.ToString)
sbRecord.Append(Row.BillToAccountNum.ToString)
sbRecord.Append(Row.BillToLineNum.ToString)
sbRecord.Append(Row.BillToReassignmentNum.ToString)
sbRecord.Append(Row.ChargeCode.ToString)
sbRecord.Append(Row.NotificationMethod.ToString)
sbRecord.Append(Row.AdjustmentAmount.ToString)
sbRecord.Append(Row.AdjustmentDate.ToString)
sbRecord.Append(Row.ReparationGivenFlag)
sbRecord.Append(Row.BillingSystemProcessingErrorCode.ToString).Append(vbNewLine)
End Sub
Public Overrides Sub PostExecute()
sbRecord.Append("RECORD_COUNT").Append((vbTab))
sbRecord.Append(Me.Variables.giRowCount.ToString).Append(vbNewLine)
sbRecord.Append("RECORD_END").Append(vbNewLine)
'Now write to file before next record extract
sw.Write(sbRecord.ToString)
'Clear contents of String Builder
sbRecord.Remove(0, sbRecord.Length)
'Close file
sw.Close()
End Sub
End Class
Has anyone got a workaround
thanks in advance
Dave
Greetings once again,
I am trying to achieve a seemingly simple task of assigning datetime value to a user variable at the point my package starts running. How can I do this without using a SQL Script Task? Should I be using a script task for this or is there a simpler way to achieving the same thing?
Thanks in advance.
Hi,
Let's say that the query in my SQL Task returns a single integer number.
How can I put that single number in a variable?
Thank you.
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
Hi
I want to use a variable in a number of SQL statements as paramenter. But I am not sure how to assign the value I want to the variable. The value I want is the maximum week number from one of my tables. I know how to put this value into a new table (which is one field and One row), but I cannot see how to pass this value to my variable. Using the table in my SQL is not straight forward unfortunately, at least not for me.
In my current project i have a requirement to assign value of an aggregate transform to a variable. But i need to accomplish it without using a script task.
View 3 Replies View RelatedI'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
Hi,
I am trying to develop a SSIS package which will read the records from the flat file and insert them into a destination table. I have some validations written in script component. I have declared two Read Write variables with package level scope. when i try to assign a value to the variable in the script component and run the package, the package throws me an error "The collection of variables locked for read and write access is not available outside of PostExecute".
What should be done to over come the problem please help me on this regard
Thanks
Madhavan.M
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
how to pass the column that has a numeric(12,0) data type to user variable in SSIS? what kind of variable data type should I choose?
if i select int64, it keep giving me an error:
Error: 0xC001F009 at Row by Row process: The type of the value being assigned to variable "User:bject_Key" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
there is no numeric data type in variable..
if you click the drop down box in variable data type, you can only see the below data type:
Int32
int64
Object
Sbyte
single
string
uint32
uint64
boolean
byte
char
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
A.
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Hi all,
I have a Send Mail Task in my control flow to notify users that the processing is done. I want to avoid the package to fall in error if the Send Mail task failed.
What is the best practice to do that ?
Should I raise the MaximumErrorCount of theSend Mail Task ? Should I play with ErrorHandler ?
Hi,
I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.
If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.
How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task
Thanks
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHi,
I would like to know is there any way we can assign/change the value of variable within data flow without using script component?
Thx.
Hi all,
By using for each loop container and script task, i am able to pick the file name from a specified folder to a user defined variable. Now i am trying to pass this variable to excel source (using data flow), but i am getting this error : -
===================================
Error at Data Flow Task [Excel Source [1]]: A destination table name has not been provided.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)
Please can you suggest me how should i pass the vaiable to the data flow and how the Excel sheet will be selected there.
Hi all,
By using for each loop container and script task, i am able to pick the file name from a specified folder to a user defined variable. Now i am trying to pass this variable to excel source (using data flow), but i am getting this error : -
===================================
Error at Data Flow Task [Excel Source [1]]: A destination table name has not been provided.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)
Please can you suggest me how should i pass the vaiable to the data flow and how the Excel sheet will be selected there.
Hi
I have a data flow task. If it completes I should update a flag in the database. So How I can I know if the
data flow task has completed or not.
Thanks
Sai
I have a table which has been loaded from various source feeds. The SourceId relates to the source name and the SourceCompanyId is the sources primary key for the company. I am basically trying to create one row with all the SourceCompanyIds in my column headers. What data flow tasks would be necessary in SSIS?
The structure of the final table is:
CREATE TABLE [dbo].[Company](
[CompanyId] [int] IDENTITY(1,1) NOT NULL,
[CompanyName] [varchar](75),
[CIK] [varchar](10),
[Ticker] [varchar](10),
[Source1CompanyId] [int] NULL,
[Source2CompanyId] [int] NULL,
[Source3CompanyId] [int] NULL,
[Source4CompanyId] [int] NULL,
[Source5CompanyId] [int] NULL,
[Source6CompanyId] [int] NULL,
CONSTRAINT [PK_Company] PRIMARY KEY CLUSTERED
(
[CompanyId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
=================================
The table in which contains all the company data
CREATE TABLE [dbo].[SourceCompany](
[SourceId] [int] NOT NULL,
[SourceCompanyId] [varchar](10) ,
[SourceCompanyName] [varchar](75),
[CIK] [varchar](10),
[Ticker] [varchar](10),
CONSTRAINT [PK_SourceCompany] PRIMARY KEY CLUSTERED
(
[SourceId] ASC,
[SourceCompanyId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Hi All,
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
The SQL datable fileds are
i) ID - Int
ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)
While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
Please do help me out.
thanks
Sanra
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
Hello There:
I am running a data flow within a ForEach loop wherein I am computing a value called QuotaGap. When it is 0 I do not want any further execution of the loop. I am using a Conditional Transform within this dataflow that writes a record to a table only when the QuotaGap is NOT 0. However, I am unable to terminate the execution of the loop as I am still within the dataflow.
Now, the computation of the gap requires a value from another variable called NetPurchases. I tried using an ExecuteSQL task in the control flow but could not figure out how to pass the value of the variable NetPurchases into the select statement to compute the gap. For example, the select statement would read:
select (QuotaUpperLimit - ?) As QuotaGap from <<tablename>>
I tried setting the parameter as an input as well as an output and it did not work.
Then I tried passing the entire SQL as a string within a variable. This does not work either because in order to compute the math QuotaUpperLimit - NetPurchases, both variables need to be integers but then you cannot concatenate integres together, which is what we need to do to create the SQL.
The other reason I am going through these hoops I guess is that I have not figured out a way to set the value of a variable within a data flow. I compute the value for QuotaGap within the dataflow in a ForEach loop but I have no way to pass this result to a variable called QuotaGap without using an ExecuteSQL task or another ForEach Loop.
I have spent hours on this simple issue and so have given up and looking to the good friends in this forum for help.
If what I have stated is not clear please let me know and I will try to clarify things a bit.
Thanks!