Hi,
I am doing a logshipping in sqlserver2000.
I have PrimaryServer database A and Secondaryserver A which is already existing. Now if i am trying to establish logshipping with this existing db in secondaryserver it says db A in destination is not in standy mode.
Please help me how to bring the db in standy mode that can be used to do logshipping.
Thanks
Md S.Hassan
I hope this hasn't been answered recently..
I have a primary SQL cluster, logshipping my SQL 2005 db to a secondary server used for the logshipping/recovery server only.
Say my primary server starts on fire, melts down, etc. How do I bring the database on the secondary server online? Do I need to roll in the transaction logs, etc.? I'm looking for a step-by-step, as I am very new to SQL.
I've seen some articles in the SQL Books Online, but things don't seem to work correctly when I follow the steps.
Please help,
THanks..
I'm wondering if somebody could provide insight into a problem I'm having with SQL Server 2005. Although the problem is happening wthin an SSIS ETL, I don't think this problem is SSIS related.
In the ETL I need to rename a database, so I first put the database into single-user mode by issuing the command:
ALTER DATABASE foobar SET SINGLE_USER WITH ROLLBACK 30
The database then goes into single-user mode, and after the renaming occurs, I attempt to put the same database back into multi-user mode:
ALTER DATABASE foobar SET MULTI_USER WITH ROLLBACK IMMEDIATE
However, whenever I have a query pane opened against the same database in SQL Server Management Studio, the ETL fails and I get this error message:
"Error: Changes to the state or options of database 'foobar' cannot be made at this time. The database is in single-user mode, and a user is currently connected to it."
I'm wondering why the ALTER DATABASE command does not kill off the active connections? This is on my development box, and I'm the only one connected to the database. I've tried with ROLLBACK 30 as well, same thing. If I cut and paste the same command into Mangement Studio, the command succeeds so I don't think its a permission issue (using Windows Authentication both Management Studio and the ETL are executed by the same login). If I close the query pane the ETL succeeds at restoring multi-user mode. Is there something I am missing? Thanks in advance!
Secondary replica database(setup in async mode) of AlwaysON went in "restricted mode" during weekly reindex operation.
So I have tried below steps
1) Executed following statement on the same secondary replica database where the issue exists
alter database <DBNAME> set multi_user with rollback immediate
but it failed with the error saying "The operation cannot be performed on database "dbname" because it is involved in a database mirroring session or an availability group. Some operations are not allowed on a database that is participating in a database mirroring session or in an availability group. ALTER DATABASE statement failed."
2) Primary database is multi_user but still tried following command on primary replia database(thinking it will replicate)
alter database <DBNAME> set multi_user
but no luck. The secondary alwaysON database shows (synchronizing) as the alwaysON is set in async mode but the command doesn't replicate across secondary
so we are left with the only option to re-setup alwaysON but I want to avoid it as database size is huge..
any other options or am I missing anything?
MCP,MCDBA(SQL 2000),MCTS(SQL 2005),MCITP(SQL 2005)
Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.) Event ID: 1049
(Same message as point 2)
9.) Event ID: 1069
(Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
We are using MSSQL 2005 and Log Shipping.
After making our secondary SQL server primary, how can we put the secondary SQL server back into standby mode?
We have a reporting database which is refreshed daily from prod backup and later creating new tables/views/indexes as part of the refresh job. Is there a better approach we can implement in sql 2012/2014 for this scenario since we are planning to migrate to sql2014.
View 5 Replies View RelatedCurrently in my environment we are using SQL server 2012.We setup Alwayson with synchronous commit.Details of existing AlwaysOn: one primary and two secondary.
Primary: On-Premise server.
Secondary1: On-Premise server.
Secondary2: Azure VM.
Requirement: We need to add Secondary3 New Azure VM on same AG with asynchronous mode or synchronous mode.
Or
We need to create one more AG on same DB and add the new replica with asynchronous.Is it possible above 2 option in this scenario? My cluster environment is Manual failover only not auto failover.
Hi there, i would please like to know how to get a database online in T-SQL, I managed to get it offline in T-SQL, but know I can't get the database back online.
Please help.
If someone can please help me with the T-SQL command.
Or direct me to a link where I can get more information.
Thanks
I have 2 SQL 2008 R2 Servers which are always running (on is Prod/one is Test).
is there a way to sync Prod to Test WITHOUT using the .bak and overriding Test's Security settings?
i have created a new login in primary server and provided dbowner permission to primary db.how do i transfer this login to secondary server and assign the same permission to secondary db ?
View 2 Replies View RelatedHow can I create secondary database on the server i.e. .ndf file?
View 2 Replies View RelatedI have SQL Server 2008 R2 database mirroring setup with witness. Below database connection string is used by the application
jdbc:sqlserver://<Server_A>MSSQLSERVER;databaseName=<Mirrored_DB>;port=1433;failoverPartner=<Server_B>MSSQLSERVER
During some maintenance activity at the OS side , I tried to manually failover database from Server_A to Server_B. It took long time for failover to Server_B. While failing over the Mirrored_DB database goes in In Recovery status and application is not able to connect to database. I waited for long time more than 40 mins for database to come online on Server_B but it did not work.So I have recovered database on Server_B using RESTORE DATABASE Mirrored_DB WITH RECOVERY.
After database was recovered on Server_B application was not able to connect to database with error as "The database <Mirrored_DB> on server Server_BMSSQLSERVER is not configured for database mirroring".
My Question is
Why manual failover did not get back database on secondary server upwhy the original connection string below is not able to connect to the database while database is online on Server_B but without mirroring
jdbc:sqlserver://<Server_A>MSSQLSERVER;databaseName=<Mirrored_DB>;port=1433;failoverPartner=<Server_B>MSSQLSERVER
Hello,
have a question about logshipping and full database backup: during a full database backup the log will be backed up too and emptied. If I run a full backup on databases which is setup for logshipping - does it mean I will loose data on the standby side ?
Thanks in advance,
Bernd
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
how to put sql server database in suspect mode intensely and get it out from suspect mode to normal mode.
i am using SQL server 2008 R2
We have 2 switch between primary and secondary this morning.
after that one database in secondary went to "initializing / recovery pending".
How can i exit from this situation ?
Hi All,
I would like to restore database using RESTORE DATABASE ... REPLACE command.
If database exists already and has any open connections this command will fail.
I would like to close all existing connections to specific database before running RESTORE DATABASE ... REPLACE command.
I can do closing from Management Studio using checkbox "Close Existing Connection" when deleting database. Actually I need to do the same but from script.
Please advice me how to do it.
Thanks in advance,
Roman
Hi,
One of our database size 90 Gb was backed up and restored on a standyby server with NoRecovery option .A Stored Procedure was written to do production Database transaction log Backup every 15 min and restore the Tlog File on Standby server.
Once the last transaction log file is restored on standby server the tlog file is deleted.
Now due to some reason the restore tlog job failed but the tlog file got deleted.
Now till we will not restore the last database backup we will not be able to start the restore tlog job.
Now the database is in restoring mode.Is there any methord to get that database online without any transactionlog.
Regards
Sufian
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
Dear All,
One of my users created a MSDE database and did not realise that the limit is 2GB. I can not access the database. Is there anyway I can recover it?
They do not have a backup.
Could I create a new database in Standard Edition and then attach the Data and log files from the MSDE database?
Would that work?
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
hi all,
one of my sql database went in suspect mode can any one advice why it has happened is it the problem with sql server . This has happend for the second time in 4 months .
thanks and regards
jk
Hi I am running my sql 2000 database server and I just want to copy that database and paste or put on another server which has also run same version of sql 2000 database. I tried to copy and paste the ldf & mdf extensioned files which are located in "C:Program FilesMicrosoft SQL ServerMSSQLData" into my 2 server, but when I open up the enterprise manager, I cant see the new database. So this way dont work, I tried to do something with export and import wizard but it just creates another database and copies the data in that database in the same server. I want to copy that data and put onto another system, please guide me. I'm confused, Thanks a lot
View 5 Replies View RelatedI would like to create a test environment on a separate server running advanced server 2000. The current production server is NT4.0. What is the easiest way to copy the databases from production to test. I installed SQL7.0 on the new box then created the backup devices. Next I copied the backup files for all of the databases including master etc. to the new backup device folders. I tried to restore the master db first - then things went down hill. Any recommended procedures regarding this? Any help would be greatly appreciated.
View 1 Replies View RelatedRecently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.'
Can someone say anything about fibe mode?I am appreciated for it.:)
We have a database that is somehow switching to single-user mode every few days. We suspect that the client application (Access 97) written by a non-developer may be doing something funny.
Has anybody encountered such a problem?
How is this possible?
Thanks in advance for any help or pointers.
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
SQL Users/DBAs,I'm trying to move data files around for a database that is in standbymode. I can detach/attach the database fine usingSP_DETACH_DB/SP_ATTACH_DB , but when I re-attach the database the logsequence is broken and I can't restore any more logs. Does anyoneknow if there is a way to move around data files and keep the databasein standby mode?Thanks,JB
View 4 Replies View RelatedAs I know the database should be restored from backup and logs reapplied. That’s the first and generally recommended approach any time a DB is suspect, whether it’s from log or data file corruption.But if I have no backups then we follow below steps ( after Googling I found these steps on most of the websites ):
1.EXEC sp_resetstatus ‘yourDBname’;
2.ALTER DATABASE yourDBname SET EMERGENCY
3.DBCC checkdb(’yourDBname’)
4.ALTER DATABASE yourDBname SET SINGLE_USER WITH ROLLBACK IMMEDIATE
5.DBCC CheckDB (’yourDBname’, REPAIR_ALLOW_DATA_LOSS)
6.ALTER DATABASE yourDBname SET MULTI_USER
Now my question is,
1. If after executing DBCC CHECKDB at 3rd step, it shows inconsistency.Then I will execute SET SINGLE USER WITH ROLLBACK & if after executing DBCC CHECKDB at 3rd step, no errors found. Then what will be the steps?
2. When we execute DBCC CHECKDB (' DBNAME ', REPAIR_ALLOW_DATA_LOSS) how can we recover lost data during process.As far as I know some data will loss and if it will happen then business will get suffered.
3. Why run DBCC CHECKDB() WITH REPAIR_ALLOW_DATA_LOSS if there are no consistency errors in the database?
Hi! I have an existing database in SQL Server 2005 and I would like to apply encryption on my database. Does anyone have an idea on this?
View 7 Replies View RelatedHello!
What is the best way to make a copy of an existing sql server database to another (physical) server?
Plan to make a full backup of another sql server database to another server. I've read about detach and attach
and copying the datafiles and log files but some say it is prone to data loss? Is this true?
And another thing, what if the existing sql server can't affor downtime for me to copy db files etc.?
Anybody here who have done the same?
Any help is very much appreciated.
Thanks!
Hey @ all,I have a question:It is possible to convert an existing SQL Server 2000 Database to SQL Server2005?best wishes!
View 1 Replies View Related