How To Bring File From FTP To Staging Table In SQL Using SSIS
Nov 6, 2007
I have been working on this without any success. Anybody out there to help?
1. There are new files uploaded in the FTP site everyday by other regions. 3 regions and 1 file each. That means 3 files at 3 different times. The file name will be that same day's date.csv. Example; today's file will be A_20071106.csv , B_20071106.csv and C_20071106.csv. Tomorrow's will be A_20071107.csv,B_20071107.csv and C_20071107.csv. How do I do this to run everyday and take the file only for that day from FTP straight into SQL Staging table?
2. Everyday, immediately after each file is uploaded, to indicate the FTP file is loaded successfully, there will be a 20071106.dummy and so on for all three files will show up on the same folder in FTP. I must make this package runable only if the .done file arrives for that days date and then execute the .csv file. Otherwise check after 30 minutes if the .dummy is there yet or not. Do this until the .dummy file comes. Then execute the package that is on that time. Then do the same for the other two for that particular day. The times are 4pm for A, 6pm for B and 8.30pm for C
3. Then, if there is a new row, it should INSERT, any changes (based on 5 columns), it should update and if there was a row yesterday and it is not there today, DELETE.
4. All this must be automated.
View 4 Replies
ADVERTISEMENT
Oct 6, 2006
Hi,
I have a flat file with columns from a geographical hierarchy such as:
Country Zone State County City Store Sub Store , etc.
The file also has data columns for months to the right of the above columns such as:
Jul Aug Sept ......... basically 25 of these columns for two years' data for one product and another set of 25 columns for another kind of product. A typical record in the file looks like:
Country Zone State County City Store Substore
USA Southeast FL Hillsborough Tampa walmart Fletcher
May04_ProdA ....Jun06_prodA May04_ProdB...Jun06ProdB
144 160 180 158
I need to upload this data into a staging table in SQL Server 2005 using SSIS, I created a table with the geographical hierarchy columns but am trying to figure out a way to load the monthly data. I can create 50 columns for the 50 months ( 25 months for each product) but that would be very crude.
Is there a better way of inserting data from this flat file into a destination table? I need all the data in the staging table in one upload.
Thanks.
View 11 Replies
View Related
Aug 31, 2007
Hello,
Maybe anyone have done that before?
I have table where i store SOURCE_TABLE_NAME and DESTINATION_TABLE_NAME, there is about 120+ tables.
i need make SSIS package which selects SOURCE_TABLE_NAME from source ole db, and loads it to DESTINATION_TABLE_NAME in destination ole db.
I made such SSIS package. set ole db source data access mode to table or view name variable.
set ole db destination data access mode to table or view name variable. set to variables defoult values (names of existing tables)
but when i loop table names is changed, it reports error, that can map columns, becouse in new tables is different columns.
how to solve that problem?
View 5 Replies
View Related
Nov 20, 2007
Hi,
Is this anyway to finding updated/ deleted recored using anyother data flow transformation tasks without using sql task.
Can find the new records using merge join task.
Is there better way to merge master table using staging table?
Thanks in advance.
DF.
View 1 Replies
View Related
Jul 27, 2007
I'm looking at SSIS and SqlBulkCopy as a possible method to quickly insert and process large amounts of data, my current method uses the sp_xml_preparedocument and OPENXML to parse an xml document of the data I want to process and insert into the database, however I'm noticing the performance of SqlServer parsing the xml document isn't that good.
I found the C# SqlBulkCopy method (new in .NET 2.0) and I was thinking it would be faster to use that to load my data into a staging table and then use SSIS to extract the data from the staging table, process and transform it as necessary and finally load it into the final destination tables. I was able to create an Integration Services Project that selects the data from the staging table, does a bit of processing on one of the fields (by calling a stored procedure), and finally loads the processed data into the final table.
The problem with this is I need to clean out the rows that were extracted from the staging table and I'm not sure how I can accomplish this (and I can't just issue a "delete from staging_table" because there maybe new records in the staging table that were not processed), perhaps I can either delete each record as it is proccessed or somehow get the last proccessed identity id from the staging table and delete all records less than or equal to that id.
thanks in advance for any help you can provide, maybe there is an easy way to accomplish what I'm trying to do.
-Matt Palmerlee
View 3 Replies
View Related
Feb 5, 2015
I'm trying to use Excel in SSIS to import the data from spreadsheet to a staging table. The package runs well from the web server using SSMS. But when I deploy and try to execute the package, I'm getting the below error. I've a question, whether I've to install the AccessDatabaseEngine driver in SQL database server or the web server where I'm executing the SSIS?
Error: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode.
View 3 Replies
View Related
Apr 14, 2015
I am having one store procedure which use to load data from flat file to staging table dynamically. everything is working fine.Staging_temp table have single column.All the data stored in that single column below is the sample Data.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
[Code]....
View 2 Replies
View Related
Jul 31, 2013
I am working on an HR project and I have one final component that I am stuck on.
I have an Excel File that is loaded into a folder every month.
I have built a package that captures the data from the excel file and loads it into a staging table (transforming a few bits of data).
I then combine it with another table in a view.
I have another package that loads that view into a Master table and I have added a Slowly Changing Dimension so that it only updates what has been changed. (it’s a table of all employees, positions, hire dates, term dates etc).
Our HR wants to have this data in a report (with charts and tables) and they wanted it to be in a familiar format. So I made a data connection with Excel loading the data into a series of pivot tables.
I have one final component that i cant seem to figure out. At the end of every year I need to capture a count of all Active Employees and all Termed employees for that year. Just a count.
So the data will look like this.
|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |
The data is in one table labeled [EEMaster]. To test the count I have the following.
SELECT COUNT([PersNo]) AS HistoricalHC
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Active'
this returns the HistoricalHC for 2013 as 418.
SELECT COUNT([PersNo]) AS NumbOfTermEE
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Withdrawn' AND [TermYear] = '2013'
This returns the Number of Termed employees for 2013 as 42.
I have created a table to report from called [dbo.TORateFY] that I have manually entered previous years data into.
|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |
I need a script (or possibly a couple of scripts) that will add the numbers every year with the year that the data came from.
(so on Dec 31st this package will run and add |2013|418|42| to the next row, and so on.
View 20 Replies
View Related
Apr 9, 2015
I am having one store procedure which use to load data from flat file to staging table dynamically.
Everything is working fine.staging_temp table have single column. All the data stored in that single column. below is the sample row.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
After the staging_temp data gets inserted into main table.my probelm is to handle such a file where number of columns are more than the actual table.
If you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main table.so how can I get only first 3 column from the satging_temp table.
Output should be like below.
AB¯ALBERTA ¯93
AI¯ALBERTA INDIRECT ¯94
AL¯ALABAMA ¯30
How to achieve above scenario...
View 1 Replies
View Related
Jul 16, 2007
We are in the process of setting up a shared staging/development enviroment in which multiple developers will deploy their packages for testing etc.
The plan is to allow the developers to remote in to execute their packages, but we are worried about the concurrency limit of 2 users per terminal services.
It is my understanding that you cannot execute packages remotely (ie you have to be on THAT box to kick it off. (FYI - we are not planning on using SQL Agent at this point - That will be with DBAs in UA)
Please let me know what options are available/best practices...
Thanks!
View 5 Replies
View Related
Apr 26, 2007
I want to have an SSIS package that processes a file in the normal insert, update style. But at the end I want to store the file as a binary field to another table for archive purposes. I am having trouble finding a good way to do this. Any samples, ideas, or articles would be appreciated.
View 8 Replies
View Related
Jan 14, 2014
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
View 9 Replies
View Related
Feb 23, 2015
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies
View Related
May 6, 2015
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
View 7 Replies
View Related
Mar 9, 2007
Hi I have a production table in SQL Server 2005 that has approx 500,000 records---every 6 hours this table needs to be truncated and filled
The basic SSIS package uses a script compentant and imports the data into a staging table which has the same structure as the production table. I have a final Execute SQL Task that Truncates the production table and does a Insert into production-select * from stage table.
Takes around 30 seconds to run this last Execute SQL Task--problem is there is a risk that our webservice will query this table during the Execute SQL Task and return incorrect results.
Q1: In this last Execute SQL Task if I used a BEGIN TRANSACTION and COMMIT TRANSACTION; will this be any quicker ?
Q2: In this last Execute SQL Task- would it be better to use a RENAME TABLE technique in TSQL--any code examples ??
Q3:Is there any way in TSQL I can compare EVERY FIELD in two tables ie Stage and Production which have identical data structures and figure out a way to update only the records that changed? Is SQL Server Replication the best way to do this
thanks kindly
Dave
View 9 Replies
View Related
Mar 31, 2008
Hi Guys,
I'm trying to import the contents of a CSV file into a staging table that I've created in SQL server 2005. To perform the import I have used the BCP utility with the use of a BCP format file.
The problem I'm having is that the data in some of the fields in the csv file are longer than the length of the corresponding field in my staging table. So when I try to import I get the following error:
[Microsoft][ODBC SQL Server Driver]String data, right truncation
And the record with the error does not import.
My question would be, is there a way of telling BCP to trim the
data before importing into the staging table? Could I somehow
specify in the BCP file to trim the data before importing or
is there a switch that i can specify in the BCP command which tells BCP to trim data to the length of the destination column.
If it helps I'm using the command below to run BCP.
bcp S_OLTPDEV.dbo.CX_LOTS_STG in %path1%CTS_SiebelLotsTo_Siebel_From_CTSlotupdates.csv -f %path1%CTS_SiebelLotsTo_Siebel_From_CTSLots_Format.fmt -F 1 -S %dbsrvr% -U %duname% -P %dpasswd%
Thanks in advance, any help would be really appreciated.
View 3 Replies
View Related
Feb 25, 2004
Hello, everyone:
I have deleted a static table accidentally in production. How will I bring it back? Thanks a lot.
ZYT
View 2 Replies
View Related
Jun 11, 2008
Hi All,
I am extracting source data which is in txt fille to OLE DB destination. But data of each day I want to save in different staging table. For Eg; tblProduct20081206, tblProduct20081207. How can it be done. I have seen lots of posting and script when destination is Txt. I want to use same table for staging but want to create different table for each day with adding date extension.
Please Help
View 2 Replies
View Related
Apr 12, 2015
I am trying to insert data from staging table to production table. In the staging table I only have period or date but no primary key.
This is my staging table
Create stagingtable(
[Period] [char](7) NOT NULL,
[CompanyCode] [varchar](100) NOT NULL,
[total] [int] NULL,
[status] [varchar](50) NULL
)
Create Production(
[Period] [char](7) NOT NULL,
[CompanyCode] [varchar](100) NOT NULL,
[total] [int] NULL,
[status] [varchar](50) NULL
)
I get this every month. What can I do to make sure only unique record are loaded into production table with no duplicate from previous month.
View 5 Replies
View Related
Mar 20, 2008
Hi, I have this scenario.
I have two tables joined.
Table A brings one record but table B brings two records for record in table A.
What I need is join both tables but I must bring (always) the max created record from table B if there are more than one record for the one in table A. Is this clear?
I dont want to use GROUP BY beacuse it is a very big query with lot of tables and it will be a mess.
I will give an example:
TABLE A
ID NAME
1 PETER
TABLE B
ID_TABLEA CREATED BROTHER
1 1-1-08 JOHN
1 2-1-08 PATRICK
If I join both tables I will have two records. What I need is to have the max created record from table B even if one or more records are joined. I only need one match from table B for each record of table A.
Any suggestion?
Thanks in advance.
View 8 Replies
View Related
Apr 24, 2008
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
View 8 Replies
View Related
May 28, 2015
I'm attempting to load some data into an explicit hierarchy in MDS 2012 via the staging table and struggling with the HierarchyName field. Specifically I'm loading data into stg.[Entity Name]_Consolidated and using the exact name of the explicit hierarchy I've set up in the front end web application.
Originally my hierarchy was labelled "Reporting Hierarchy" and when loading the data into staging using this name then running the batch from the Import Data screen I can see the error message "Error - The HierarchyName is missing or is not valid.". I've checked the table mdm.tblHierarchy and can see that the name there is exactly as it was in the staging table and have since renamed the hierarchy as "Reporting_Hierarchy" with the same results.
View 0 Replies
View Related
Jun 23, 2015
I have a large table with 100 Million records that has around 1 million duplicate records that need to be deleted.
I am running a script that creates a staging table called,DuplicateTable that collects all the duplicates and then I want to write a an effecient delete statement.
Is it possible to write something like:
delete from OrigTable O join DuplicateTable D
on O.Key = D.key
Or do I have to run a loop on the DuplicateTable and run a delete statement record by record ?
View 4 Replies
View Related
Jan 2, 2014
We are designing a Staging layer to handle incremental load. I want to start with a simple scenario to design the staging.
In the source database There are two tables ex, tbl_Department, tbl_Employee. Both this table is loading a single table at destination database ex, tbl_EmployeRecord.
The query which is loading tbl_EmployeRecord is, SELECT EMPID,EMPNAME,DEPTNAME FROM tbl_Department D INNER JOIN tbl_Employee E ON D.DEPARTMENTID=E.DEPARTMENTID.
Now, we need to identify incremental load in tbl_Department, tbl_Employee and store it in staging and load only the incremental load to the destination.
The columns of the tables are,
tbl_Department : DEPARTMENTID,DEPTNAME
tbl_Employee : EMPID,EMPNAME,DEPARTMENTID
tbl_EmployeRecord : EMPID,EMPNAME,DEPTNAME
How to design the staging for this to handle Insert, Update and Delete.
View 9 Replies
View Related
May 8, 2014
In my ETL job I would like to truncate stg table but before truncating stging table, I want to make sure that all the records are inserted in the data model. The sample is as below
create table #stg (
CreateID int,
Name nvarchar(10)
)
insert into #stg
select 1, 'a' union all
select 2, 'b' union all
[Code] ....
How can I check among these tables and make sure that all values are loaded into the data model and the staging table can be truncated.
View 2 Replies
View Related
Jul 17, 2015
where including/excluding a single column in an empty staging table would influence a resultset returning from distributed query? Both servers are SQL Server 2012. Nothing special about the staging table. It contains 12 columns with a mixture of INT and NVARCHAR(256) columns. In one case I exclude the column and the query returns in 17 seconds. When I include it the query does not return. Excluding the INSERT INTO the staging table and query returns in 17 secs with and without the column.
View 3 Replies
View Related
Jan 17, 2007
hi
I am very very new to sql server 2005.I want to create SSIS package for my text file to transfer in table.How i do this and where i will get that SSIS package (like in sql server 2000 we get that in EM under DTS) and how do i schedule these packages.
Please guide me.
Thanks
View 2 Replies
View Related
Jan 30, 2008
I have an excel file source, that has a column that is a date column, although the group puts in more that just a date sometimes: example (11/1/2007) or (Sold), the problem is I cant get SSIS to ever see anything but the date, for the cells that have Sold shows me null, or blank when doing a view. Any thoughts??? I am starting to hate excel more and more.
View 4 Replies
View Related
Oct 13, 2015
I have a load a zipped folder which is PGP encrypted into SQL table, How to unzip and load it into sql table using SSIS.
View 4 Replies
View Related
Aug 24, 2006
Hi All,
I have a table A. I need output subset of a table A to a flat file using query, like:
select A.* from A inner join B on... ..... inner join C......where left(A.id, 3) = B.sid.... AND B.num between 100 and 200).
How can I do this in SSIS? Which data flow item I may need?
Thanks
View 2 Replies
View Related
Nov 5, 2007
Hi,
I have a tab delimited file I need to transfer to a table using SSIS. Columns can have NULL value and there might be extra tabs in each row also. How can I do this? Maybe fuzzy lookup?
Thanks
View 2 Replies
View Related
Oct 19, 2007
I am new to SSIS and am having trouble with automatically setting up the destination output columns.
I am sure there must be an easy way to do this.
My table (source) has 86 columns in it of varying lenghts.
In my connection magagers, I have created one for the SQL Server (source data) and one for the flat file (destination output).
I have also created an OLE DB source data object and a destination Flat File object and set them up to the respective connection managers.
Finally I have linked the source to the destination.
Now when I look at the source, it shows me all 86 columns.
When I open up destination, there are no columns set up.
Problem: do I have to type in all the columns manually in the connection manager for the Flat File?
I would think there would be some automatic way that it would self-populate the columns over to the flat file destination.
View 3 Replies
View Related
Apr 24, 2008
How do i import a Varying Column Width Flat file into a Table using SSIS?
I have a flat file that has 4 columns with varying width
Like I should read the file as
Col 1 - (1 to 10 Characters)
Col 2 - (12 to 21 Characters)
Col 3 - (22 to 35 Characters)
Col 4 - (36 to 38 Characters)
At the end of the record is a "LF"
I think "Fixed Width" Columns allow me to define a standard column length for all the columns.. Right?
Any thoughts on how to?
View 9 Replies
View Related
