How to calculate the cumulative of months.
Jan FebMar AprMay JunJul AugSep Oct Nov Dec
321 394571 577 617 692924 944956 1010 1308 1686
if i execute my query in this month(getdate) then it should sum from Jan to Aug Similarly i execute same query it should sum from Jan to Sept So on.
I am making a report for a car dealer. Each month a certain number of cars will be placed on the lot and a certain number will be taken off. I want to make a report that will show the inventory levels at any point in time. (I will further refine the report by color, origin, model, etc later.) I am currently listing each car in my inventory table, flagging it with a "removed" flag when it is sold. My flag for adding a car is 1 and removing a car is -1. It's easy enough to sum the table and get the current inventory level but I'm having trouble looking back over time.
Say in January I had 35 cars on the lot. I sold 20 and added 5. In February I sold 9 and added 10. In March I sold 12 and added 5.
I need the report to break every month. But on the break I need to add all the cars in the table minus cars sold. For the January report it should show a total (cars added - sold) in the table. Each month I need to take a new grand total of all cars added minus cars sold up to the end of that month OR cars added that month minus cars sold that month added to the running total from the previous month.
Is there some sort of calculate measure I could stick in my cube that would carry these totals? Or any other ideas?
Thanks.
I need to calculate cum amount from the following table.
CREATE TABLE #TotalRevenue_Investments
( [Month] INT,[Year] INT,TotalRevenue INT,Descr VARCHAR(100),Company VARCHAR(100))
INSERT INTO #TotalRevenue_Investments
( Month ,
Year ,
TotalRevenue ,
[Code] ....
AND so ON ..
I need the OUTPUT AS FOR example
SELECT 1 AS Month,2014 AS Year,12 AS cumAmt,'Late Sales' AS Descr,'US Late Sales' AS Company
I want to show cumulative numbers, but don't know how to calculate them.
Here is an example of the source and the wanted result:
Source:
[Week] [Count]
1 15
2 5
3 6
4 10
(until 52)
Result:
[Week] [Count]
1 15
2 20
3 26
4 36
Is this possible, and how?
TestData:
USE TestDb /*SqlServer 2005*/
CREATE TABLE Test(
[Week] [int] NOT NULL,
[Count] [int] NOT NULL
)
GO
INSERT INTO Test ([Week], [Count]) VALUES (1, 15)
INSERT INTO Test ([Week], [Count]) VALUES (2, 5)
INSERT INTO Test ([Week], [Count]) VALUES (3, 6)
INSERT INTO Test ([Week], [Count]) VALUES (4, 10)
I have a start date saved and an end date saved but when I query I only want to return the amount of months that have elapsed between the two, any idea?
View 4 Replies View RelatedI have a database of the table payments
and I want to create another table with
the olds payments (18 months past)
a have a field with the payment date
date_pay.
How I can do that?
Thanks
Luiz Lucasi
Is there an easy way to calculate a sum for the previous three months?
Data
Date,Area,PropertyID,Volume,DaysInMonth
197904,6,888888,9589,30
197905,6,888888,27403,31
197906,6,888888,17130,30
197907,6,888888,14321,31
197908,6,888888,15234,31
[Code] .....
Desired Output
Date,Area,PropertyID,Volume,DaysInMonth,3MonthSum, DaysInMonthSUm
197904,6,888888,9589,30,NULL,NULL
197905,6,888888,27403,31,NULL,NULL
197906,6,888888,17130,30,NULL,NULL
197907,6,888888,14321,31,54122,91
197908,6,888888,15234,31,58854,92
[Code] .....
I would like to calculate difference between end_date and current date in Months.And also how we can calculate the sum of difference in months between start_date and end_date for each ID?
CREATE TABLE datedifference (
id INT
,start_date INT
,end_date INT
)
INSERT INTO datedifference VALUES (10,20091202,20100629)
INSERT INTO datedifference VALUES (20,20071202,20090330)
INSERT INTO datedifference VALUES (30,20051202,20101031)
I have a report that has 41 fields one of these fields is the Admit Date. I need to create a field that shows a count of Admits in the past 12 months .
View 6 Replies View RelatedHi there,
if any body out there has done this before, can you please post the T-SQL script that calculate whatever last months of data based on a Date field.
Thanks very much,
Manny
I have a challenge and I'm not sure the best route to go. Consider the following dataset.
I have a table of sales. The table has fields for customer number and date of sale. There are 1 - n records for a customer. What I want is a record per customer that has the customer number and the average number of months between purchases. For example, Customer 12345 has made 5 purchases.
CustomerNumber SalesDate
1234 05/15/2010
1234 10/24/2010
1234 02/20/2011
1234 05/02/2012
1234 12/20/2012
What I want to know is the average number of months between the purchases. And do this for each customer.
I have the following table
FeedBack Type Date
test2 positive 03/15/08
tes3 negative 03/01/08
.. ....
in my page i need to select the number of negative/positive comments within the last
1 month, 6 months, 12 months
How can I accomplish that?
thanks
Is it possible to create a cumulative log using SSIS? basiclly I have 5 logs which hold failed records. I would like to create a cumulative log and send it via email using SSIS.
thoughts?
thanks
I'm trying to get the final result using an aggregate function.
Table looks like below;
ID ACRE Probability
1 3 0.3
2 1 0.6
3 6 0.2
4 5 0.5
5 2 0.1
First, I want to descend by probability then select all records that cumulative acre <= 8
So, final result will be:
ID ACRE Probability
2 1 0.6
4 5 0.5
Any idea how to write a script?
Thanks in advance,
Mike Jun
hyunhyo@hotmail.com
GIS reserch Group
University of Colorado
303-492-8781
I have to group the no. of employees based on month. i.e
Jan 10 employees
Feb 20 employees
Mar 30 employess
The result is to be
Jan 10
Feb 20
Mar 60.
Kindly provide the sql for getting the above result.
Thanks,
Lakshmi
SQL Server 2000 SP3Hi,How can I get the cumulative weeks from a givedate to the currentdate. I know I can get the weeknumber by using datepart(wk,getdate())but this will giveme the week number for this year. What if I want to know the number ofweeksthat have passed since june 1 2001. If I use datepart(wk,'20010106') Iwillget the week number for 2001 but I would like the number of weeksexpired between then now.Thanks,Reg
View 1 Replies View RelatedI have a table consisting of 3 columns: Parent varchar(50), Child varchar(50), Pop int.
The table is setup as follows:
Parent Child Pop
----------------------------------
Europe France 0
France Paris 1
New York New York City 10
North America United States 0
North America Canada 0
United States New York 0
United States Washington 0
Washington Redmond 200
Washington Seattle 100
World Europe 0
World North America 0
This is just some sample data modified a tiny bit from an example of a hierachical print out sample that is a stored procedure that allows me to pass any place and see all of that place's children/grandchildren.
I need to figure out how to write a query to show me cumulative sums (ROLLUP?) of the whole tree. So the output should basically be something like this (it can include parent and child columns too):
World Null 311
World Europe 1
Europe France 1
France Paris 1
World North America 310
North America United States 310
North America Canada 0
United States New York 10
United States Washington 300
New York New York City 10
Washington Redmond 200
Washington Seattle 100
Hopefully you understand what i'm looking for. I've tried using WITH ROLLUP and I also tried using an Inner Join but I'm not really sure what I need to do to pull this off. I seem to only be able to get it to work 1-2 levels deep but not through the whole tree.
Any help/ideas would be appreciated! Thank you.
In the emp table :
>
> EMPNO ENAME SAL
> ==================
> 7369 SMITH 1000
> 7499 ALLEN 2000
> 7521 WARD 3000
> 7566 JONES 4000
> 7654 MARTIN 5000
>
> there is a requirement to have a calculated col.
> called cummulative sal
>
> EMPNO ENAME SAL CUMMULATIVE_SAL
> 7369 SMITH 1000 1000
> 7499 ALLEN 2000 3000
> 7521 WARD 3000 6000
> 7566 JONES 4000 10000
> 7654 MARTIN 5000 15000
>
>
How to show this calculated col. by using one select statement?
I could get the result using Empno. in my query as --
select ename,sal,(select sum(sal) from emp k where k.empno <= e.empno) as cum from emp e order by ename
but I was asked to get the same result if empno. col is not there?
SUCKS........... the below code is giving the result but I don't know how you could use operator (<) on two strings to compare......????
select ename,sal,(select sum(sal) from emp k where k.ename <= e.ename) as cum from emp e order by ename
Someone tell me if this is the right approach or is there a better way of getting the thing done.
Hi,There are 3 tablesTable,TableDetails,TableDaily.With structureTABLE:TableID UserID Money---------- ---------- ----------(int) (int) (money)TABLEDETAILS:TableDetailsID TableID ItemID PaidForItem DayID---------- ---------- ---------- ---------- ----------(int) (int) (int) (money) (int)TABLEDAILY:TableDailyID TableID PaidForItem Money Total Change---------- ---------- ---------- ---------- ---------- ----------(int) (int) (money) (money) (PaidForItem + Money) (money)"Table" holds id for user and his money amount, which changes during time. "TableDetails" holds data about items user bought, amount paid for them and dayid which relates to one particular day."TableDaily" holds history. I do not know how to update this table.I created job whish runs stored procedure. This procedure sums "PaidForItem" using group by TableID and WHERE DAYID = '11'.Problem is with Change column. This column sould hold difference between today's Total and previous one etc.Current procedure looks like this:INSERT INTO TableDaily (TableID, PaidForItem, Money, DayID)SELECT TableDetails.TableID, SUM(PaidForItem) AS PaidForItem, Table.Money, (SELECT DayID FROM Days WHERE (Aktive = 1)) AS DayIDFROM TableDetails INNER JOIN Table ON TableDetails.TableID = Table.TableID GROUP BY TableDetails.TableID, Table.Money
View 3 Replies View RelatedI have the following:
SELECT '201305' AS PAYPERIOD,
EMPLOYEE,
RIGHT ('000' + CAST (DEPT_ID AS VARCHAR(3)) ,3) AS DEPARTMENT,
COUNT (EMPCODE) AS BONUSCOUNT_YTD
FROM Table1
WHERE (YEAR = 2013 AND PERIOD < 2)
GROUP BY EMPCODE, YEAR, PERIOD, DEPT_ID
[Code] ...
How can I get the counts to be cumulative? In other words, if an employee appears in pay period 201305 that's 1, if they then appear in pay period 201306 that becomes 2.
Is there any way to calculate Cumulative result.
Manpower|Count|Cum_Count|Formula
Apr|70|70|Sum(APR)
May|40|110|Sum(Apr+May)
Jun|110|220|Sum(Apr+May+Jun)
I tried to install "Cumulative update package 2 for SQL Server 2005 Service Pack 2"
Everything went well except for the "SQL Server Database Services" update.
It errored out as it was trying to "Finalize" the update.
Kicker to this whole thing is the database file "temp_MS_AgentSigningCertificate_database.mdf" does not even exist.
I could not see any references to it in the master database.
I checked the registry and I can find a couple of search references for it.
It apparently may have been a database that existed in the server at one time.
I am not sure if I should remove the registry references to the database.
Below is a part of the install summary where it has failed:
===========================================================
Product Installation Status
Product : SQL Server Database Services 2005 (MSSQLSERVER)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB936305_sqlrun_sql.msp.log
Error Number : 29537
Error Description : MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]A file activation error occurred. The physical file name 'F:Data emp_MS_AgentSigningCertificate_database.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.. To continue, correct the problem, and then run SQL Server Setup again.
If someone can tell me what I need to do to resolve this issue, I would greatly
appreciate it.
Thanks,
Larry :-(
Larry :-)
Hello,
I want to display subtotals for a column only for that page. Like;
Index Value
-----------------------------
1 4
2 5
Subtotal 9
----------------------------
3 1
4 2
Subtotal 3
Total 12
RunningValue gives cumulative totals. I need subtotals for each visible page only. Is there a way to do it ?
Constraints:
I'm using a table. And I shouldn't use page breaks on my report.
Thanks in advance
How would I iterate through this table and do a cumulative sum on the value column :
I'm trying to get the following result:
Hi
I have found two cumulative update packages available for sql 2005 sp2 - build 3161 (http://support.microsoft.com/kb/935356) and build 3175 (http://support.microsoft.com/kb/936305).
The fixes are supposed to be cumulative and include all fixes since the last service pack, but the list of hotfixes in each package is different.
Does build 3175 contain the fixes in build 3161? What about fixes mentioned in build 3175 that have version lowere than 3161 - are they included in build 3161?
Anthony
For Eg.
I have a table like gias given below:
Name Amount
------------------------------
aaa 10
bbb 20
and I want an output like one given below on running SQL query or stored procedure
Name Amount cumulative amount
---------------------------------------------------------------------
aaa 10 10
bbb 20 30
can anyone plz help me on this
I have table like below, its period wise ,here the value get cumulative period wise.
amtname period
10CHR201202
20TNG201202
10CHR201203
20TNG201203
I have a table with the following creation sql script
CREATETABLE [dbo].[TEST_ENROLLMENT](
[ENROLLMENT_ID] [int]
NOTNULL,
[COURSE_OFFERING_ID] [int]
NOTNULL,
[STUDENT_ID] [int]
[Code] ....
Below is the sql insert for the above table’s data
INSERTINTO TEST_ENROLLMENT(ENROLLMENT_ID,COURSE_OFFERING_ID,STUDENT_ID,DEPT_ID,COURSE_CODE,CREDIT,SECTION_ID,
SEMESTER,ACAD_LEVEL,ACAD_YEAR,DATE_ENROLLED,[STATUS],TOTAL_MARK,GRADE_LETTER,QPE,Honor,INSTRUCTOR_ID,USERNAME
)VALUES(877,356,104,15,'IRD
[Code] ...
I was trying to calculate GPA and Commulative GPA (CGPA) for this student and the formula of GPA is SUM(Honor)/SUM(CREDIT) and the formula of the CGPA is the Average of the SUM(Honor)/SUM(CREDIT) grouped by semester and I wrote the below query which is calculating the GPA correctly but wrongly calculating the CGPA.
How to get the correct CGPA shown in the below desired result set table.
select x.STUDENT_ID,AVG(x.gpa)as
GPA,AVG(y.gpa)AS'COMMULATIVE GPA'
from
(
select STUDENT_ID,SUM(Honor)/SUM(CREDIT)
gpa,ACAD_YEAR,SEMESTER
[Code] ....
Current result set (Incorrect CUMULATIVE GPA)
STUDENT_ID GPA CUMULATIVE GPA
104 2.9 2.9
104 2.25 2.25
104 3 3
Desired result set
STUDENT_ID GPA COMMUTATIVE GPA
104 2.9 2.9
104 2.25 2.575
104 3 2.716
Hi,
I'm planning to install the cumulative hotfix (build 2187) on my sql 2000 clustering server (SP4, 2040). And I would like to know if the cumulative hotfix is able to roll back. If possible, please provide me any information about that. Thanks in advance.
Morning chucky eggsThis is duplicated over at SQLTeam...except I've moved on a bit so my question to you is different:http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=103798SQL 2k5I have a standard hierarchy in an adjacency table modelling business units in an organisation. I have another table associating people with (one single) business unit. I need to return all the people in each business unit in a cumulative manner i.e. a unit will include all people assigned to that unit and assigned to all child units too.Below is1) Set up code (in red)2) Initial query that failed on last data load due to the nature of the data changing and me not considering the ramifications of my initial solution properly3) My new soulution.My question is - is there a better way to accomplish this? I don't rate my code that highly and could do with this being as efficient as possible as at present I can't see it scaling to larger and larger data volumes all that well.USE tempdbgo----------------------------------------------------------------- Set up the structure & data...---------------------------------------------------------------CREATE TABLE dbo.org ( unit_code VARCHAR(10) NOT NULL , parent_code VARCHAR(10) NULL , CONSTRAINT pk_org PRIMARY KEY CLUSTERED (unit_code) WITH (FILLFACTOR = 100) )GO CREATE TABLE dbo.org_peeps ( unit_code VARCHAR(10) NOT NULL , person_code INT NOT NULL , CONSTRAINT pk_org_peeps PRIMARY KEY CLUSTERED (unit_code, person_code) WITH (FILLFACTOR = 100) , CONSTRAINT fk_org_peeps_other_org_peeps FOREIGN KEY (unit_code) REFERENCES dbo.org (unit_code) )GO CREATE VIEW dbo.org_peeps_parents--WITH SCHEMABINDINGAS SELECT org.unit_code , org.parent_code , org_peeps.person_code FROM dbo.org LEFT OUTER JOIN dbo.org_peeps ON org_peeps.unit_code = org.unit_codeGO INSERT INTO dbo.org (unit_code, parent_code)SELECT 'a', 'y' UNION ALLSELECT 'b', 'y' UNION ALLSELECT 'c', 'z' UNION ALLSELECT 'y', 'z' UNION ALLSELECT 'z', NULL--Insert people data (NOTE - the people are in units at the BOTTOM of the structure only)INSERT INTO dbo.org_peeps (unit_code, person_code)SELECT 'a', 1 UNION ALLSELECT 'c', 3 UNION ALL--These data go into intermediate levels of the organisation...SELECT 'y', 4 UNION ALLSELECT 'y', 5 UNION ALLSELECT 'y', 6---------------------------------------------------------------SELECT 'Original query. Because there is data in the intermediate tables --> ' + 'duplicate outputs....'---------------------------------------------------------------;WITH materialised_pathsAS ( SELECT unit_code , parent_code , person_code , unit_path = '/' + CAST(unit_code AS VARCHAR(MAX)) + '/' FROM dbo.org_peeps_parents WHERE parent_code IS NULL UNION ALL SELECT all_people.unit_code , all_people.parent_code , all_people.person_code , mp.unit_path + CAST(all_people.unit_code AS VARCHAR(MAX)) + '/' FROM dbo.org_peeps_parents AS all_people INNER JOIN materialised_paths AS mp ON mp.unit_code = all_people.parent_code )SELECT parents.unit_code , children.person_codeFROM materialised_paths AS childrenCROSS APPLY --Correlated derived table - get the child records per unit ( SELECT unit_code , parent_code FROM dbo.org AS parents_sub WHERE children.unit_path LIKE '%/' + parents_sub.unit_code + '/%' ) AS parentsWHERE children.person_code IS NOT NULLORDER BY person_code , unit_code-----------------------------------------------------------------SELECT 'This query returns the correct results but man it is ugly. '+ 'Can it be refined optimised?'-----------------------------------------------------------------;WITH materialised_pathsAS ( SELECT unit_code , parent_code , unit_path = '/' + CAST(unit_code AS VARCHAR(MAX)) + '/' FROM dbo.org WHERE parent_code IS NULL UNION ALL SELECT all_orgs.unit_code , all_orgs.parent_code , mp.unit_path + CAST(all_orgs.unit_code AS VARCHAR(MAX)) + '/' FROM dbo.org AS all_orgs INNER JOIN materialised_paths AS mp ON mp.unit_code = all_orgs.parent_code )SELECT all_orgs.unit_code , org_peeps.person_codeFROM dbo.org_peepsINNER JOIN ( SELECT org.unit_code , mp.unit_path FROM materialised_paths AS mp CROSS APPLY ( SELECT unit_code , parent_code FROM dbo.org WHERE mp.unit_path LIKE '%/' + org.unit_code + '/%' ) AS org ) AS all_orgsON all_orgs.unit_path LIKE '%/' + org_peeps.unit_code + '/'ORDER BY person_code , all_orgs.unit_code--Clean upIF EXISTS (SELECT NULL FROM sys.views WHERE object_id = OBJECT_ID('dbo.org_peeps_parents')) BEGIN DROP VIEW dbo.org_peeps_parentsENDIF EXISTS (SELECT NULL FROM sys.tables WHERE object_id = OBJECT_ID('dbo.org_peeps')) BEGIN DROP TABLE dbo.org_peepsENDIF EXISTS (SELECT NULL FROM sys.tables WHERE object_id = OBJECT_ID('dbo.org')) BEGIN DROP TABLE dbo.orgENDAs ever kudos and lavish thanks to anyone that can help :DOh - I nearly forgot - accounting for the Rudy clause - desired output:unit_code person_code---------- -----------a 1y 1z 1c 3z 3y 4z 4y 5z 5y 6z 6
View 14 Replies View RelatedOh hai
This is closely related to this problem where Ryan & Peter helped me out loads (thanks again guys):
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=101989
I now have a slightly different problem. Instead of returning the cumulative counts of people related to a business unit in the hierarchy I now need to return the actual people records. I had some code, derived from the above, that worked fine until I loaded some new data. It took a while but eventually I figured out the (now obvious) reason for the error. I have tried several changes to the query and not got anywhere. Please could someone have a look and see if you can suggest the required alteration(s)?
USE tempdb
go
---------------------------------------------------------------
--Set up the structure & data...
---------------------------------------------------------------
CREATE TABLE dbo.org
(
unit_codeVARCHAR(10)NOT NULL
, parent_codeVARCHAR(10)NULL
, CONSTRAINT pk_orgPRIMARY KEY CLUSTERED (unit_code) WITH (FILLFACTOR = 100)
)
GO
CREATE TABLE dbo.org_peeps
(
unit_codeVARCHAR(10)NOT NULL
, person_codeINTNOT NULL
, CONSTRAINT pk_org_peepsPRIMARY KEY CLUSTERED (unit_code, person_code) WITH (FILLFACTOR = 100)
, CONSTRAINT fk_org_peeps_other_org_peepsFOREIGN KEY (unit_code) REFERENCES dbo.org (unit_code)
)
GO
CREATE VIEW dbo.org_peeps_parents
--WITH SCHEMABINDING
AS
SELECT org.unit_code
, org.parent_code
, org_peeps.person_code
FROMdbo.org
LEFT OUTER JOIN
dbo.org_peeps
ONorg_peeps.unit_code= org.unit_code
GO
INSERT INTO dbo.org (unit_code, parent_code)
SELECT 'a', 'y'UNION ALL
SELECT 'b', 'y'UNION ALL
SELECT 'c', 'z'UNION ALL
SELECT 'y', 'z'UNION ALL
SELECT 'z', NULL
--Insert people data (NOTE - the people are in units at the BOTTOM of the structure only)
INSERT INTO dbo.org_peeps (unit_code, person_code)
SELECT 'a', 1UNION ALL
SELECT 'c', 3
---------------------------------------------------------------
SELECT'This works great....'
---------------------------------------------------------------
;WITHmaterialised_paths
AS
(
SELECTunit_code
, parent_code
, person_code
, unit_path= '/' + CAST(unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents
WHEREparent_code IS NULL
UNION ALL
SELECTall_people.unit_code
, all_people.parent_code
, all_people.person_code
, mp.unit_path + CAST(all_people.unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents AS all_people
INNER JOIN
materialised_paths AS mp
ONmp.unit_code= all_people.parent_code
)
SELECTparents.unit_code
, children.person_code
, children.unit_path
FROMmaterialised_paths AS children
CROSS APPLY--Correlated derived table - get the child records per unit
(
SELECTunit_code
, parent_code
FROMdbo.orgAS parents_sub
WHEREchildren.unit_path LIKE '%/' + parents_sub.unit_code + '/%'
) AS parents
WHEREchildren.person_code IS NOT NULL
ORDER BY person_code
, unit_code
--Add data to INTERMEDIATE levels of organisation
INSERT INTO dbo.org_peeps (unit_code, person_code)
SELECT 'y', 4UNION ALL
SELECT 'y', 5UNION ALL
SELECT 'y', 6
---------------------------------------------------------------
SELECT'Since there is now data in the intermediate tables there are ' +
'duplicate outputs....'
---------------------------------------------------------------
;WITHmaterialised_paths
AS
(
SELECTunit_code
, parent_code
, person_code
, unit_path= '/' + CAST(unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents
WHEREparent_code IS NULL
UNION ALL
SELECTall_people.unit_code
, all_people.parent_code
, all_people.person_code
, mp.unit_path + CAST(all_people.unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents AS all_people
INNER JOIN
materialised_paths AS mp
ONmp.unit_code= all_people.parent_code
)
SELECTparents.unit_code
, children.person_code
, children.unit_path
FROMmaterialised_paths AS children
CROSS APPLY--Correlated derived table - get the child records per unit
(
SELECTunit_code
, parent_code
FROMdbo.orgAS parents_sub
WHEREchildren.unit_path LIKE '%/' + parents_sub.unit_code + '/%'
) AS parents
WHEREchildren.person_code IS NOT NULL
ORDER BY person_code
, unit_code
---------------------------------------------------------------
SELECT'This is the output I want - but I can''t simply apply distinct - the volumes of data preclude this'
---------------------------------------------------------------
;WITHmaterialised_paths
AS
(
SELECTunit_code
, parent_code
, person_code
, unit_path= '/' + CAST(unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents
WHEREparent_code IS NULL
UNION ALL
SELECTall_people.unit_code
, all_people.parent_code
, all_people.person_code
, mp.unit_path + CAST(all_people.unit_code AS VARCHAR(MAX)) + '/'
FROMdbo.org_peeps_parents AS all_people
INNER JOIN
materialised_paths AS mp
ONmp.unit_code= all_people.parent_code
)
SELECTDISTINCT
parents.unit_code
, children.person_code
, children.unit_path
FROMmaterialised_paths AS children
CROSS APPLY--Correlated derived table - get the child records per unit
(
SELECTunit_code
, parent_code
FROMdbo.orgAS parents_sub
WHEREchildren.unit_path LIKE '%/' + parents_sub.unit_code + '/%'
) AS parents
WHEREchildren.person_code IS NOT NULL
ORDER BY person_code
, unit_code
--Clean up
IF EXISTS (SELECT NULL FROM sys.views WHERE object_id = OBJECT_ID('dbo.org_peeps_parents')) BEGIN
DROP VIEW dbo.org_peeps_parents
END
IF EXISTS (SELECT NULL FROM sys.tables WHERE object_id = OBJECT_ID('dbo.org_peeps')) BEGIN
DROP TABLE dbo.org_peeps
END
IF EXISTS (SELECT NULL FROM sys.tables WHERE object_id = OBJECT_ID('dbo.org')) BEGIN
DROP TABLE dbo.org
ENDJust paste and run the code and hopefully it should be reasonably clear. If you need any further info please let me know
How can I update a table to have a running cumulative sum?
For Example:
Update Table1 Set Cumulative_Sum = Row_Sum + Previous_Row_Sum
It should look something like this:
Row_Sum Cumulative_Sum
1 1
2 3
3 6
4 10
I have a cumulative measure in Tabular, and when I filter by a date in SQL it brings back all rows up to that date. However, when I drill down on any of the numbers, it only brings back rows related to the filtered date, and not the cumulative rows. Is there any way round this at all? Major obstacle for me at the moment...
View 5 Replies View Related