Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
I want to use Navigation to click-through to another report.
However, the source report is an MDX summary report, and the report I'm calling needs the entire Customer MDX tuple as a parameter. (the entire customer tuple is not available in my cube)
The text box has enough information to identify the customer, but not the entire tuple.
I want to pass the text box contents to a SP which returns the MDX string, and pass that to the new report.
I do not see how using another data source can help me accomplish this.
Basically, I am wondering is there a way I can have an expression similar to
=EXECUTE(spX, parm=txtbox.Value)
Thanks In Advance for any help...
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedI have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedDear all
Please tell me how to call Stored Procedure in a Script Task?
My Stored Procedure have an input parameter is @xmlDoc
Thanks & Rdgds
I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
Â
ConnectionManager cm;
System.Data.SqlClient.SqlConnection sqlConn;
System.Data.SqlClient.SqlCommand sqlComm;
cm = Dts.Connections["OLE_TEST_"];
sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction);
sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn);
sqlComm.ExecuteNonQuery();
above code , no message box.
Hi
Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?
Hi ,
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
Please do help as soon as possible
Thanks
Manish
Dear All!
I use a "Execute SQL Task" to call a Stored Procedure. My Stored Procedure have an input parameter with type: ntext. And in "Execute SQL Task", I set variable in Parameter Mapping as following:
Variable Name: User::xmlDocument (this variable is a String to store xml data)
Direction: Input
DataType: NVARCHAR
ParameterName: 0
When length of "User::xmlDocument" is too large then error is happen but on the contrary, "Execute SQL Task" run successfully.
So, Can you show me how to pass large data into stored procedure using "Execute SQL Task"?
I am looking forward to hearing from you
Thanks
Hi :Can i call 2 procs within one task?I have sp_proc1 ? (and have declared one global variable as inputparameter)now i have another sp_proc2 which uses same input parameterbut if i write two statements like this within one task, i get anerrorexec sp_proc1 ?exec sp_proc2 ?I can solve the problem by writing them in 2 separate tasks, but wouldlike one task.Please help..thanksRashika
View 1 Replies View Related
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help.
CREATE PROCEDURE [dbo].[MarketCreate]
( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),)
ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate
)
I have created a stored procedure only with an insert statement in sql server 2005.
How can i call this stored procedure through code in ASP.NET page using vb.
i want to pass one parameter that comes from a text box in asp.net page.
my emailid is: g12garg@yahoo.co.in pls reply.
Thank you
Gaurav
Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong??
Thanks
Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 1 Replies View RelatedHi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 2 Replies View RelatedGreetings,
Even though this may be not right place with this issue I would like to try!
I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form.
I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
Many thanks in Advance
hi,
i created a stored procedure and below is the code segment of it;
create Procedure test1
@price as varchar(50) output,
@table as varchar(50) = ''
AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
Hi, i wanna know if we can call a stored procedure from another one. If yes, what's the syntax?
Thanks
Respected Sir/MAm
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table.
i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Thank You.
Upali
Hi there. My problem is: I have two stored procedures.
1. SELECT A FROM B
2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets?
P.S. I already tried to use return instead of select in the first procedure. Same result.
Thank you
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
Dan
Hi,
I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT
I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables.
Those values are not needed immediately. The calculation takes between 20 or 30 minutes.
Do you have any idea how to do it ?
Thanks
I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
Hi All,
I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions:
1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject.
2) Can someone provide any links to online tutorials on t-sql?
Thanks in advance.
Curtis
Dear Masters;
How can I call a stored procedure with VB code?
Thanks
Hi.....I have problem and I need your helpI stored a procedure in the Projects Folder in my computerand I want to return the procedure result in a column inside tableHow I can do that?????????thank you
View 2 Replies View RelatedCan DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
View 1 Replies View RelatedI'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
-- Decalre variables
DECLARE @object INT
DECLARE @hr INT
DECLARE @property VARCHAR(255)
DECLARE @return VARCHAR(255)
DECLARE @src VARCHAR(255)
DECLARE @desc VARCHAR(255)
-- Create object
EXEC @hr = sp_OACreate 'SQLActiveXTest.SQLActiveXTestClass', @object OUT
-- Call method
EXEC @hr = sp_OAMethod @object, 'getDesc', @return OUT
-- Destroy object
EXEC @hr = sp_OADestroy @object
Hello;
I am using an Access 2003 front-end, and an SQL backend to run my application. I have a pretty good handle on using stored procedures and assigning variables for criteria within the SPROC.
I am however having a problem when I try to use a variable in place of a named procedure. For example I have a function that runs 2 procedures, therefore I "Call" the function with the code that runs my procedure, and simply change the name of the SPROC with each call. My problem is that I cannot figure out the syntax to use a variable for the named procedure. My code always errors on the line "objConn.MySProc MyCalendar, objRs" because MySproc is of course not a named procedure.
So how do I refer to a procedures name using a variable?
Here's my code;
Function LieuBen()
MyCalendar = CurrTSCalendar
Call PopulateTmpFile("sp_DelTmpProctimesheetCalc")
Call PopulateTmpFile("sp_PopTmpCalcLieuBen")
End Function
Function PopulateTmpFile(MySProc As Variant)
Dim sp_PopulateTempOTTable As String
Const DS = "SOS-1"
Const db = "TIMS"
Const DP = "SQLOLEDB"
Dim objConn As New ADODB.Connection
Dim objRs As New ADODB.Recordset
Dim objComm As New ADODB.Command
ConnectionString = "Provider=" & DP & _
";Data Source=" & DS & _
";Initial Catalog=" & db & _
";Integrated Security=SSPI;"
' Connect to the data source.
objConn.Open ConnectionString
' Set a stored procedure
objComm.CommandText = MySProc
objComm.CommandType = adCmdStoredProc
Set objComm.ActiveConnection = objConn
objConn.MySProc MyCalendar, objRs
objConn.Close
Set objRs = Nothing
Set objConn = Nothing
Set objComm = Nothing
End Function
Hello all,
does anyone know if it's possible to call a stored procedure from a view.
Thnx,
Patrick