How To Call Stored Procedure In Script Task
Jan 17, 2008Dear all
Please tell me how to call Stored Procedure in a Script Task?
My Stored Procedure have an input parameter is @xmlDoc
Thanks & Rdgds
ADVERTISEMENT
How To Call Stored Procedure In Execute SQL Task
Jan 8, 2008Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much
Integration Services :: Call Stored Procedure Result In Message Box In SSIS Script Task
Sep 4, 2015I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
Â
ConnectionManager cm;
System.Data.SqlClient.SqlConnection sqlConn;
System.Data.SqlClient.SqlCommand sqlComm;
cm = Dts.Connections["OLE_TEST_"];
sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction);
sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn);
sqlComm.ExecuteNonQuery();
above code , no message box.
SSIS Hard Time Getting Back XML Return Data From Stored Procedure Call Executed By Execute SQL Task
Aug 9, 2006I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
How Do I Call A Stored Procedure To Insert Data In SQL Server In SSIS Data Flow Task
Jan 29, 2008
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
System Stored Procedure Call From Within My Database Stored Procedure
Mar 28, 2007I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
How To Call A Stored Procedure Using C#
Aug 29, 2007I have a stored procedure I created in SQL server 2005. Now I need to call the stored procedure in C#. Can someone help me out here? What is the C# code I need to call this stored procedure? I have never done this before and need some help.
CREATE PROCEDURE [dbo].[MarketCreate]
( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2),)
ASINSERT INTO Market( MarketCode MarketName LastUpdateDate)VALUES( @MarketCode @MarketName @LastUpdateDate
)
How To Call A Stored Procedure In Asp.net
Mar 31, 2006I have created a stored procedure only with an insert statement in sql server 2005.
How can i call this stored procedure through code in ASP.NET page using vb.
i want to pass one parameter that comes from a text box in asp.net page.
my emailid is: g12garg@yahoo.co.in pls reply.
Thank you
Gaurav
Call For BCP Within A Stored Procedure
Aug 7, 2001Does anyone give me syntax for adding a bcp script within a stored procedure..I had done it once 3 yrs back does'nt seem to work now, and I do not know where I am going wrong??
Thanks
How Can I Use Stored Procedure To Call Dll
Aug 7, 2001Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 1 Replies View RelatedHow Can I Use Stored Procedure To Call Dll
Aug 7, 2001Hi, If I have a dll file and I know the interface of that dll file. How can I use stored procedure to call this dll file? Thank you.
View 2 Replies View RelatedCall SQL Stored Procedure
Nov 9, 2005Greetings,
Even though this may be not right place with this issue I would like to try!
I facing with the problem “Object Variable or With Block variable not set” while I am trying to execute the stored procedure from Ms. Access form.
I need some help very badly or maybe a good sample of code that works in this issue is very welcome.
Many thanks in Advance
Stored Procedure Call
Jul 4, 2006hi,
i created a stored procedure and below is the code segment of it;
create Procedure test1
@price as varchar(50) output,
@table as varchar(50) = ''
AS
Declare @SQL_INS VarChar(1000)
SELECT @SQL_INS = 'select ['+@price+'] from ['+@table+']'
Exec (@SQL_INS)
Procedure gets 2 parameters, one of them is just INPUT parameter and the other one is both OUTPUT and INPUT. What i wanna do is to get the result set of this procedure to use in my application.
Call Stored Procedure From Another SP
Dec 11, 2007Hi, i wanna know if we can call a stored procedure from another one. If yes, what's the syntax?
Thanks
How To Call Stored Procedure In VC++
Oct 6, 2007
Respected Sir/MAm
i am working on VC++ (visual studio2005 with sql200).i have created one stored procedure to insert data into table.
i want to call this strd procedure in the VC++ main.cpp file....
Could you please help me for the correct syntax code with example.
Thank You.
Upali
Stored Procedure's Call
Apr 7, 2008Hi there. My problem is: I have two stored procedures.
1. SELECT A FROM B
2. SELECT C FROM D WHERE A = EXEC First procedure
The meaning: First procedure gets some Id from B table. The second one gets a DataSet by this Id number. The problem is that when I getting an Id from first proc I use SELECT, than in the second one I use EXEC, and in the end, seconf procedure returns two DataSets. The first contains an Id from first procedure, second contains a valid DataSet. Therefore my application falls because it suppose that valid data in first DataSet. Hoow can I call to stored procedure from another stored procedure without creating two DataSets?
P.S. I already tried to use return instead of select in the first procedure. Same result.
Thank you
Asynch Call DTS Or Stored Procedure 1.1
Jul 10, 2006Hi,
I would like to trigger a DTS or a stored procedure from asp.net 1.1 BUT
I don't want to wait for it to finish. In fact the DTS/Storeproc calculates values into different tables.
Those values are not needed immediately. The calculation takes between 20 or 30 minutes.
Do you have any idea how to do it ?
Thanks
Call Stored Procedure In Loop
Oct 26, 2006I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
Call Function From Stored Procedure
Jan 19, 2007Hi All,
I'll admit that I'm not the greatest at stored procedure/functions but I want to learn as much as possible. So I have two questions:
1) I had VS2005 autogenerate a sqldatasource that created Select/Insert/Update stored procedures. When Updating a record and calling the stored procedure, I want to query another table (we'll call it tblBatchNo) that has only one record, Batchno. I want to put that current batchno into the Update statement and update the record with the current batchno. Can someone point me in the right direction? Remember that I'm still a beginner on this subject.
2) Can someone provide any links to online tutorials on t-sql?
Thanks in advance.
Curtis
How To Call A Stored Procedure From A Web Page With VB
Feb 13, 2007Dear Masters;
How can I call a stored procedure with VB code?
Thanks
How To Call Stored Procedure To Table??
Nov 12, 2007Hi.....I have problem and I need your helpI stored a procedure in the Projects Folder in my computerand I want to return the procedure result in a column inside tableHow I can do that?????????thank you
View 2 Replies View RelatedMake A Call To AS/400 Stored Procedure From DTS
Feb 15, 2000Can DTS make a call to a stored procedure on an AS/400 and accept data from that call. I need to access the AS/400 through OLE/DB for AS/400, execute the call to a stored procedure (the AS/400 stored procedure gets the data from DB2/400, executes some business logic, then presents the record set), and grab the record set returned and dump it into a SQL 7.0 table.
View 1 Replies View RelatedError Within Stored Procedure Call
Feb 20, 2003I'm using the sp_OAMethod method to call a method called "getDesc" from within a VB .dll I created. Within the .dll file, the method is called "getDesc()", but for some reason I'm getting an error saying it is an unknown name. I am able to create the object without errors, so I know the .dll is correctly registered and is being found by the server. Any idea what would cause this error when I know the method name is correct? The code I use is below (without error handling to make it shorter):
-- Decalre variables
DECLARE @object INT
DECLARE @hr INT
DECLARE @property VARCHAR(255)
DECLARE @return VARCHAR(255)
DECLARE @src VARCHAR(255)
DECLARE @desc VARCHAR(255)
-- Create object
EXEC @hr = sp_OACreate 'SQLActiveXTest.SQLActiveXTestClass', @object OUT
-- Call method
EXEC @hr = sp_OAMethod @object, 'getDesc', @return OUT
-- Destroy object
EXEC @hr = sp_OADestroy @object
Using A Variable To Call A Stored Procedure Name
Jan 31, 2006Hello;
I am using an Access 2003 front-end, and an SQL backend to run my application. I have a pretty good handle on using stored procedures and assigning variables for criteria within the SPROC.
I am however having a problem when I try to use a variable in place of a named procedure. For example I have a function that runs 2 procedures, therefore I "Call" the function with the code that runs my procedure, and simply change the name of the SPROC with each call. My problem is that I cannot figure out the syntax to use a variable for the named procedure. My code always errors on the line "objConn.MySProc MyCalendar, objRs" because MySproc is of course not a named procedure.
So how do I refer to a procedures name using a variable?
Here's my code;
Function LieuBen()
MyCalendar = CurrTSCalendar
Call PopulateTmpFile("sp_DelTmpProctimesheetCalc")
Call PopulateTmpFile("sp_PopTmpCalcLieuBen")
End Function
Function PopulateTmpFile(MySProc As Variant)
Dim sp_PopulateTempOTTable As String
Const DS = "SOS-1"
Const db = "TIMS"
Const DP = "SQLOLEDB"
Dim objConn As New ADODB.Connection
Dim objRs As New ADODB.Recordset
Dim objComm As New ADODB.Command
ConnectionString = "Provider=" & DP & _
";Data Source=" & DS & _
";Initial Catalog=" & db & _
";Integrated Security=SSPI;"
' Connect to the data source.
objConn.Open ConnectionString
' Set a stored procedure
objComm.CommandText = MySProc
objComm.CommandType = adCmdStoredProc
Set objComm.ActiveConnection = objConn
objConn.MySProc MyCalendar, objRs
objConn.Close
Set objRs = Nothing
Set objConn = Nothing
Set objComm = Nothing
End Function
Call Stored Procedure From View
Sep 7, 2006Hello all,
does anyone know if it's possible to call a stored procedure from a view.
Thnx,
Patrick
How To Call A Function In Stored Procedure
Sep 12, 2012How to call a sql function in stored procedure using Sqlserver 2008?
View 4 Replies View RelatedCall DTS Using Parameter In Stored Procedure?
Jul 18, 2014I have created a DTS package which stores file data into Database table.
I want to pass file name dynamically to stored procedure from which DTS retrieve data and store it in table.
How To Call Stored Procedure In Table???
Nov 12, 2007Hi.....
I have problem and I need your help
I stored a procedure in the Projects Folder in my computer
and I want to return the procedure result in a column inside table
How I can do that?????????
thank you
How To Call A Stored Procedure In A Scheduled Job
Jul 20, 2005Hi All,I have a stored procedure.I need to create a scheduled job using that stored procedure.I went to Enterprise Manager -->Management--> Jobs-->New JobPropertiesIn the step tab, I can select db and put the codes.Instead of writing the code there, I want to call the stored procedurein the command box.How can I do that?System: MS SQL Server 2000I would highly appreciate your help.Thanks a million in advance.Best regards,mamun
View 1 Replies View RelatedAborting CALL To Stored Procedure
Jul 20, 2005HelloI am calling a stored procedure in a MSDE/SQLServer DB form within myVisual C++ 6.0 program along the linesCCommand<CAccessor<CdboMyAccessor>>::Open(m_session, NULL);WithDEFINE_COMMAND(CdboMyAccessor, _T("{ CALL dbo.MyProc; 1(?,?) }"))It all works sweet as, but it can take a while and I want to let theuser abort it.Everything I've tried ends in tears.
View 6 Replies View RelatedCan I Call A Stored Procedure In View?.
May 5, 2008
Is it possible to call a soted procedure in view?.
If so, how to call?.
Please post syntax.
Thanks
How To Call A C#.net Class From Stored Procedure
Apr 19, 2006Hi,
I would like to know how can I call a c#.net class from a stored procedure.
I have a class file which will generate a pdf file from sql reporting services and mail that file. Now I want to call this class from a stored procedure. Is it possible, if so please send me the sample code.
Thanks in advance
Regards
Babu
How Do I Call A Stored Procedure In Vb2005
Oct 9, 2006I have a sql2005 express database I am using in a vb2005 application. I have read a bunch and can't seem to find a clear (to me) example of how to call a stored procedure. I have a procedure that runs ok in the query builder, but don't have a clue about how to call it now that it is written. SO.
call the database MYdatabase
call the Stored procedure MYStoredproc.
Any help?
Dave
PS: it dosen't require and values passed to it, its very simple.