How To Call A SSIS Package With A Specific Parameter
Apr 2, 2008
I need to be able to call a SSIS package with a specific parameter for one of the variables. Basically the package needs to be triggered from an application (.NET, C#) with a specific value.
The package is stored in the SQL Server (in Stored packages).
I have seen the article on dtexec and the SET flag, however we do not want to turn on xp_cmdshell on the SQL server due to the security implications, and that seems to be the only way to call dtexec
I have seen another article that says you can have a job invoke a package then have a specific user granted permission to the job, but that doesn't address how to set the parameter/variable for the package.
There are actually some other steps that technically need to run using the same parameter, so ideally if I could have a stored procedure call the SSIS package, then the subsequent toher stored procedures using the sent in parameter that would be great. I just can't figure out how to do this securely (as xp_cmdshell is not considered secure).
Thanks for any comments.
View 12 Replies
ADVERTISEMENT
Mar 27, 2008
I am new to the SSIS.
For DTS package of sql server 2000, I can call a DTS package from stored procedure. The command is:
dtsrun /E /SMyServer /NMyDTS /Wtrue /A Parameter1:3= 'Test'
Does anyone know, how do I do the similar thing from SSIS environment.
1) How to call a SSIS package from Stored Procedure?
2) How do I pass parameter to the SSIS package?
Thanks everyone.
View 6 Replies
View Related
Feb 6, 2007
Hi. Is it possible to call an executable that resides on another server from an SSIS package? If that's not possible, is it possible to call an EXE that resides on the SQL Server box itself? Thank you
View 3 Replies
View Related
Jan 20, 2008
I have an SSIS package stored on the file system and I want to execute it from a Visual Studio 2005 VB project. I have searched the internet for examples and have been unable to find any examples. I gather that I will be using SQLSMO however I'm at a loss on how to do this task. Any help is appreciated! Thanks.
Karen
View 3 Replies
View Related
Jun 15, 2007
I will really appreciate if someone can post step by step process to call an Oracle Stored Proc from SSIS. Here is the Stored Proc Spec:
PROCEDURE Interface_Begin
(p_from_dttm OUT varchar2,
p_error_code OUT number,
p_error_text OUT varchar2,
p_proc_name OUT varchar2);
View 10 Replies
View Related
Dec 3, 2007
Hello,
is there any way to execute a SSIS package at the SQL Server programatically from a remote computer? (I use .net 2)
I don't need variables or return values, I only want to start the package. I know that it is easier to do that job with a webservice etc on the SQL Server but I cannot use such.
A method to call a package from a stored procedure would also help me a lot
Kind regards, _Rodney_
View 1 Replies
View Related
Dec 31, 2007
Hi All,
I need your help to call an SSIS package using ASP.NET. I have deployed the package using SQL server deployment with an windows authentication. I need to call that package from a remote machine. Also i need to assign a value for a variable in that package while calling it from ASP.NET.
Plz let me know the steps to call that package from ASP.NET
Thanks
View 1 Replies
View Related
Mar 5, 2015
I am having few queries related to follow.
1. Is it possible to call SSIS package from procedure .
2. Also want to supply parameters to procedure.
3. Can multiple users execute that procedure simultaneously.
4. If yes then will it cause any issue if it is run simultaneously by 10 users.
View 3 Replies
View Related
Oct 28, 2006
Hi, Everyone:
I am getting the following error message when I try to execute a SSIS package from an asp.net page written in C# 2.0. What I am trying to do is basically just click on a button in the web page and it will execute the package. The code to execute the package is pretty simple. I pass the path of the DTS package stored in the local folder. This works fine in the machine where SQL2005 is installed locally. But it fail when I have a seperate Web Server and SQL Server. Any ideas? Do I have to install SSIS or SQL2005 on a web server as well?
Thanks
static public string Execute_SSIS_DTS(string DTS_Path)
{
Microsoft.SqlServer.Dts.Runtime.Application app;
app = new Microsoft.SqlServer.Dts.Runtime.Application();
Package package = app.LoadPackage(DTS_Path, null);
DTSExecResult result = package.Execute();
return result.ToString();
}
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.
Line 226: static public string Execute_SSIS_DTS(string DTS_Path)
Line 227: {
Line 228: Application app = new Application();
Line 229: Package package = app.LoadPackage(DTS_Path, null);
Line 230: DTSExecResult result = package.Execute();
[COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.]
Microsoft.SqlServer.Dts.Runtime.Application..ctor() +43
[DtsPipelineException: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.]
Microsoft.SqlServer.Dts.Runtime.Application..ctor() +169
Utilities.Execute_SSIS_DTS(String DTS_Path) in c:InetpubwwwrootMasterTablesApp_CodeUtilities.cs:228
MasterTables_Admin_MasterTables_LOINC_External.btn_SyncLISTest_Click(Object sender, EventArgs e) in c:InetpubwwwrootMasterTablesMasterTables_CustomMasterTablesCustom_LOINC_External.aspx.cs:98
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +114
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +141
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3215
View 1 Replies
View Related
May 21, 2015
I have ssis package which is credated by VS-2010.
I want execute this SSIS package from the stored procedure (SQL server 2005).
View 3 Replies
View Related
Sep 30, 2015
How do we connect and get data from SAP database using SSIS 2012/2014.Currently we are extracting data using WebService, and BAPI function call for RFC, but it seems not so much reliable, due to timeout and others. ion providing the link for download of .NET Framework Data Provider for mySAP Business Suite and some sample to invoke and get the data using SSIS.
View 5 Replies
View Related
May 18, 2015
I have a ssis package which runs daily. This ssis package has couple of execute sql tasks which load data for yesterday's transaction. Ex.
INSERT INTO Shipped (Div_Code, shipment_value, ship_l_id, shipped_qty, shipped_date, whse_code,
ord_id, ship_id, ship_l_ord_l_id, Created_date) select ord.DIV_CODE as div_code, ship.SHIPMENT_VALUE as shipment_value, ship_l.SHIP_L_ID as ship_l_id, ship_l.SHIPPED_QTY as shipped_qty, ship.SHIPPED_DATE as shipped_date, ship.WHSE_CODE as whse_code, ord.ORD_ID as ord_id, ship.SHIP_ID as ship_id, ship_l.ord_l_id as ship_l_ord_l_id, Getdate() as Created_date from SHIP ship, ORD ord, SHIP_L ship_l where ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))) and ship.WHSE_CODE='WPP' and ord.ORD_ID=ship.ORD_ID and ship.SHIP_ID=ship_l.SHIP_ID
All execute sql task has query like above query. and in some query we have date filter which loads data for yesterday. Ex. one query has ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). some other query has ord.trans_date=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). this package runs daily through sql server job, so It loads data for yesterday. Now If i want to run for any particular date, How could we achieve from ssis?
View 3 Replies
View Related
Aug 31, 2006
Hi
i am develope package using Oracle DataBase
My Logic is INSERT NEw Reocrds And Updated Existing Records With Some Condiotion .
In Source query Some select Columns with Where Condiotion .This Where Condition Field value should pass at that time of Runtime Parameter. How to Achieve Parameter value pass in OLEDB Source at run time.
Please any one give me the Solution. I am struggling with INSERT , UPDATE Records With Paramet condiotion,? Any one give Sample Insert and Update with Parameter using Oracle Database?
Thanks & regards,
Jeyakumar .M
View 1 Replies
View Related
May 19, 2006
Hi all.
we have SSIS package which runs under SQL Job.
Now we need to modify this package in order to have input parameter
which we want to setup in the "Set Value" Tab of SQL Server 2005 SQL Job |Edit Step |Option window.
Could anybody give me in details how-to setup Global Variable (or something else) inside SSIS Package in order to create input parameter of the package?
I also appreciate an advice how exactly we should assign value to input parameter of SSIS Package inside SQL Job Set Value Tab (example?).
Thank you,
Vitaliy
View 3 Replies
View Related
May 4, 2015
Is there a way to capture any firing for a SP such as (datetime , loginname,..) and not using SQL profiler ?
View 3 Replies
View Related
Aug 24, 2007
How do I pass a parameter from a SSRS report to the sql stmt in a SSIS package?
Mainly need to know the correct syntax of the connection string to use for the datasource in the SSRS report. Every time I add the /SET part of the string the connection breaks.
The connection string i've been using is:
/file "C:\PackageName.dtsx /Set Package.Variables[StartDate];"&Parameters!StartDate.Value
View 26 Replies
View Related
Feb 25, 2008
I've created a varible timeStamp that I want to feed into a stored procedure but I'm not having any luck. I'm sure its a simple SSIS 101 problem that I can't see or I may be using the wrong syntax
in Execute SQL Task Editor I have
conn type -- ole db
connection -- some server
sql source type -- direct input
sql statement -- exec testStoredProc @timeStamp = ?
if I put a value direclty into the statement it works just fine: exec testStoredProc '02-25-2008'
This is the syntax I found to execute the procedure, I don't udnerstand few things about it.
1. why when I try to run it it changes it to exec testStoredProc @timeStamp = ? with error: EXEC construct or statement is not supported , followed by erro: no value given for one or more requreid parameters.
2. I tired using SQL commands exec testStoredProc @timeStamp and exec testStoredProc timeStamp but nothing happens. Just an error saying unable to convert varchar to datetime
3. Also from SRS I usually have to point the timeStamp to @timeStamp and I dont know how to do that here I thought it was part of the parameter mapping but I can't figure out what the parameter name and parameter size should be; size defaults to -1.
Thank you, please help.
View 2 Replies
View Related
Aug 24, 2007
How do I pass a parameter from a SSRS report to the sql stmt in a SSIS package?
Mainly need to know the correct syntax of the connection string to use for the datasource in the SSRS report. Every time I add the /SET part of the string the connection breaks.
The connection string i've been using is:
/file "C:\PackageName.dtsx /Set Package.Variables[StartDate];"&Parameters!StartDate.Value
View 3 Replies
View Related
Apr 17, 2014
I have a few questions about the following t-sql 2008 r2 sql code listed below that is calling a stored procedure:
DECLARE@return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C'
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
The sql listed above does execute the stored procedure called [dbo].[sproom] successfully and returns all the data all the rows from the stored procedure multiple times. However can you tell me the following:
1. How can I have the stored procedure return distinct rows?
2. I want the stored procedure to return selected columns. I tried using the OUTPUT parameter for some of the columns, but I got the error message, "Procedure or function spHomeroom has too many arguments specified.".
when I change the sql above to:
DECLARE @return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C',
@CustName varchar(50)
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
,@CustName
That is when I get the error message.
A solution might be to change the stored procedure, but I would prefer not to since this is a generic stored procedure that I believe a lot of t-sqls and stored procedures will use.
View 3 Replies
View Related
Jul 9, 2015
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
View 4 Replies
View Related
Apr 30, 2007
I run into some issues and really need some expert help here.
Here is the problem. I have two packages (parent.dtsx and child.dtsx). Both package have its own configuration file (parent.dtsConfig and child.dtsConfig). The file Child.dtsConfig contains a variable (i.e. "X") that is to be used by Child.dtsx.
Inside parent.dtsx. there is a package-task that calls into Child.dtsx. It worked perfectly well if I run parent.dtsx using Dtexec or from inside SSIS's IDE.
Now I want to programmably call "parent.dtsx" from my C# code. I loaded package using "app.LoadPackage"... Inside C# code, I want to reconfigure Child-package's variable ("X"). I then loaded in "Child.dtsx". However when I run "parent.dtsx" and child.dtsx still loads the original value for "X". The reconfigured value for "X" is not updated.
Please help on how to get around this issue.
Thanks.
View 10 Replies
View Related
Jul 31, 2006
Hi
We already used Oracle Datasatage Server the following Query statement for Source and Lookup.here there is parameter maping in the SQl Statement . How can achive in SSIS the Folowing Querystatment?
Query 1: (source View Query)
SELECT
V_RDP_GOLD_PRICE.GDR_PRODUCT_ID, V_RDP_GOLD_PRICE.ASSET_TYPE, V_RDP_GOLD_PRICE.PREFERENCE_SEQ, V_RDP_GOLD_PRICE.RDP_PRICE_SOURCE, TO_CHAR(V_RDP_GOLD_PRICE.PRICE_DATE_TIME,'YYYY-MM-DD HH24:MI:SS'), TO_CHAR(V_RDP_GOLD_PRICE.REPORT_DATE,'YYYY-MM-DD HH24:MI:SS'), V_RDP_GOLD_PRICE.SOURCE_SYSTEM_ID
FROM
V_RDP_GOLD_PRICE V_RDP_GOLD_PRICE
WHERE
REPORT_DATE = (select max(report_date) from V_RDP_GOLD_PRICE where source_system_id = 'RM' )
Query 2: (look up )
SELECT
GDR_PRODUCT_ID,
TO_CHAR(MAX(PRICE_DATE_TIME),'YYYY-MM-DD HH24:MI:SS') ,
TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS')
FROM
V_RDP_GOLD_PRICE
where
GDR_PRODUCT_ID = :1 and
report_date = TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') AND
PRICE_DATE_TIME BETWEEN TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') - 7) AND TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS')
GROUP BY GDR_PRODUCT_ID, TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS')
please anyone give the sample control flow and how to pass the parameter?
Thanks & regards
Jeyakumar.M
View 1 Replies
View Related
Sep 24, 2007
Hi
I have below sql procedure
CREATE PROCEDURE Qty
@make as nvarchar(32)
AS
select department as category from tblproducts where department = @make
GO
Parameter (@make) will get the value from asp.net page
My Question: Is any possibilities to change the value of parameter when the procedure trigger. Examlpe like below
If @make = 'Sealed Lead Acid' then I need to pass parameter to the database as 'SLA'
elseIf @make = 'Photographic' then 'Multimedia'
elseif @make = 'cctv and accessories' then 'security'
and so on. I only have six categories. Please help
Advance Thanks
View 3 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Aug 9, 2006
I have searched this forum for how to call a store procedure with
parameter and so far no result has answered my question yet. I have the
following store procedure:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE sqlSearch
-- Add the parameters for the stored procedure here
@strSearch varchar(250)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
WHERE ([name_nws] LIKE '%" + @strSearch + "%' OR
[title_nws] LIKE '%" + @strSearch + "%'OR [sub_nws] LIKE '%" +
@strSearch + "%' OR [sum_nws] LIKE '%" + @strSearch + "%' OR
[content_nws] LIKE '%" + @strSearch + "%')
END
GO
I got this far in my code on how to call the parameter store procedure.
string strConn = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; SqlConnection sqlConn = new SqlConnection(strConn); SqlCommand sqlComm = new SqlCommand(); sqlComm.Connection = sqlConn; sqlComm.CommandType = CommandType.StoredProcedure; sqlComm.CommandText = "sqlSearch"; sqlComm.Parameters.Add("@strSearch", SqlDbType.VarChar); I don't know what do next.
Help is much appreciated.
View 4 Replies
View Related
Jul 18, 2014
I have created a DTS package which stores file data into Database table.
I want to pass file name dynamically to stored procedure from which DTS retrieve data and store it in table.
View 3 Replies
View Related
Jul 23, 2005
Hi all, I want to use a function with a tabel object as parameter. Doessomeone know a method to do this. I have read that a table as parameteris invalid.
View 4 Replies
View Related
Apr 2, 2007
We have a requirement to call a Web Service method from SSIS where the method accepts a single parameter that is derived from a database recordset and can exceed 4k characters. From the little we know about the Web Service task it is limited to only accepting direct input and variables. Does anyone have any suggestions to overcoming this issue? Any detailed information in possibly calling the Web Service from script or using an object variable would be extremely appreciated.
Thank you in advance for your help.
View 2 Replies
View Related
Jan 4, 2000
Hi SQL Colleagues:
Is it possible for me to call a DTS package from within a stored procedure? If it is not possible to do so directly, would I at least be able to call the package through a job?
Thanks!!!
Don
View 1 Replies
View Related
Aug 3, 2007
I'm trying to create a Grid View from a stored procedure call, but whenever I try and test the query within web developer it says I did not supply the input parameter even though I am.I've run the stored procedure from a regular ASP page and it works fine when I pass a parameter. I am new to dotNET and visual web developer, anybody else had any luck with this or know what I'm doing wrong? My connection is fine because when I run a query without the parameter it works fine.Here is the code that is generated from web developer 2008 if that helps any...... <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:IMS3TestConnectionString %>" ProviderName="<%$ ConnectionStrings:IMS3TestConnectionString.ProviderName %>" SelectCommand="usp_getListColumns" SelectCommandType="StoredProcedure"> <SelectParameters> <asp:querystringparameter DefaultValue="0" Name="FormID" QueryStringField="FormID" Type="Int32" /> </SelectParameters> </asp:SqlDataSource>
View 5 Replies
View Related
Sep 15, 2014
In t-sql 2012, the followinng sql works fine when I declare @reportID.
IF @reportID <> 0
BEGIN
SELECT 'Students report 1' AS selectRptName, 1 AS rptNumValue
UNION
SELECT 'Students report 2', 2
UNION
[code]...
However when I use the sql above in an ssrs 2012 report, the query does not work since the @reportID parameter can have 0, 1, or up to 200 values.Thus I am thinking of calling the following following function to split out the parameter values:
FUNCTION [dbo].[fn_splitString]
(
@listString VARCHAR(MAX)
)
RETURNS TABLE WITH SCHEMABINDING
AS
RETURN
(
SELECT SUBSTRING(l.listString, sn.Num + 1, CHARINDEX(',', l.listString, sn.Num + 1) - sn.Num - 1) _id
FROM (SELECT ',' + LTRIM(RTRIM(@listString)) + ',' AS listString) l
CROSS JOIN dbo.sequenceNumbers sn
WHERE sn.Num < LEN(l.listString)
AND SUBSTRING(l.listString, sn.Num, 1) = ','
)
GO
how to remove the @reportID <> 0 t-sql above and replace by calling the fn_splitString function?
View 2 Replies
View Related
Oct 26, 2007
Hi,
I would like to call the report from an external source:
The report requires a paramater.
I tried the following:
<a href='http://Report.aspx?ItemTakeOn%2fItemTakeOn&ProcessNo=278'> Report</a>"
The link works & i added the parameter in the link (ProcessNo=278)
it opens the report but i still have to manually insert the Parameter.
Also tried setting the parameter as hidden.
How do i bypass this?
Anyone please Assist!
Regards
View 1 Replies
View Related
May 23, 2007
I developed one DLL in vb .Net which call two web services (sql endpoints) I wish to use this solution but for hundreds of servers (endpoints) I want to ask if I could do that with dynamic parameters passed to de DLL CALL in sql server clr.
Actually when I compile de DLL I need to have referenced (hardcoded) the webservices (endpoints) and when I need a brand new endpoint I need to reference it, compile the dll and release.
I cannot find how to invoke the service within the DLL with the namespace or webservice name as parameter.
Mi code to invoke now my referenced end point is: (note that my endpoint name is rperez)
Dim CallWebService As New rperez.IntelisisServiceEndPoint
CallWebService.Credentials = System.Net.CredentialCache.DefaultCredentials
Call CallWebService.IntelisisService(ArchivoOriginal)
My class rperez.IntelisisServiceEndPoint is referenced (hardcoded) in the dll project I need it dynamic
Do I need to change my code to PROXY object ?
View 1 Replies
View Related
