hello everyone
I'd like to know if there is a way to catch the error messages when a tasks fails, that's because i's like to store every message on a user variable, so i could log all of them later, I was thinking that it may be possible with the event handlers, could it be?
regards
I have created a package which has event handlers.
After the end of every data flow task I have a event handler on the data flow post execute which updates a column in the
database. When I execute the package from Visual Studio everything works well. But when I call the package from
.NET I am able to carry out the data flow task, but the event handler does not execute and it does not update the column
in the database. Can anyone tell me why?
Thanks
Sai
I am currently working to write a progress log for my SSIS packages. So far I am able write a new log entry, update this log entry using OnProgress and OnError Event Handlers. I'd like to take it one step further. Whenever the package ends whether cancelled or finished normally; I'd like to write to my logging table COMPLETED_ABNORMALLY on cancelled or COMPLETED_NORMALLY on a normal finish of the package. I'm not sure where to begin with this process. I'd like to utilize a simple method and event handler.
View 0 Replies View RelatedHi,
We are currently facing an issue in ensuring restartability of an SSIS package. The scenario is explained below.
Context:
The SSIS Package has two Data Flow tasks. The Data Flow task named DFT1 is the predecessor for DFT2 and chained with OnSuccess precedence constraint.
OnPreExecute and OnPostExecute event handlers have been implemented for DFT1. Each task in both event handlers as well as DFT1 and DFT2 have FailPackageOnFailure set to True.
Scenario1: Task in OnPreExecute of DFT1 fails.
DFT1 is attempted and succeeded.
OnPostExecute of DFT1 was not attempted.
DFT2 was not attempted.
Checkpoint file was created; however, no entries were made.
When restarted, execution started from first step in Control flow.
Scenario2: Task in OnPostExecute of DFT1 fails.
DFT1 and its OnPreExecute Event were executed.
DFT2 was not attempted.
Checkpoint file was created and entries were made. Entries had DTS:result as 0 for OnPreExecute and DFT1 tasks.
When restarted, DFT2 was executed. OnPostExecute event, which failed during previous execution, was not attempted.
Each task in the package, whether it is in Control flow or as part of an event handler is crucial for seamless execution. But apparently, as explained above, there is no reliability on the event handlers in case of failures. Has anyone encountered similar scenario? Is this behavior as per design of the runtime engine?
Thanks, in advance,
Regards,
Rajesh
I have an SSIS Package that loads data to a SQL Server table and also logs package statistics along the way with individual SQL statements. In the event of failure, I want the data loaded to the target table rolled back but I want the statistics updates saved to the database. My package consists of several Execute SQL tasks that handle the logging and a Data Flow task that loads the data to the target table along with a couple of event handlers to handle errors. I have the Transaction Option property on the Package set to Required, to Supported on the Data Flow, and to Not Supported on the Execute SQL tasks and the OnError Event Handlers.
When we run the package (and cause an error) everything runs fine until it gets to the On Error event handler for the Data Flow task. This task hangs and never finishes. If we set the Transaction Option for the Event Handler to Supported (allowing it to enlist in the parent transaction) it works but the updates that it makes roll back along with the data from the Data Flow.
Is there a problem with having Event Handlers stay out of a transaction started by the parent package?
Any help would be appreciated.
I would like to create an event handler that would catch any errors that result from a sys.<table> not existing. The package is designed to run on both SQL Server 2000 and SQL Server 2005 and when I query sys.<tables> there is an error when the query is run on SQL Server 2000. I just need a good starting point...I would like something that when the server isn't 2005 it just skips the server and doesn't fail the package and doesn't get counted towards the max error count. Thanks for any help.
-Kyle
I have followed Jamie's excelent article on logging to a table to follow the execution of a package.
View 6 Replies View Relatedevent handlers was not executed when my package get fails it will go to directly to on error...not executing on preexecute. but it was working fine previously...i haven't change anything i have run it again...got this issue...
is there any thing wrong?
Hello, everyone:
I want to know if there is an event in profiler can catch web application name. If yes, which one? For example, there is SP named sp_storedprocedure that is called by www.web.com and www.web.com/forumdisplay.php?f=23. I want create a profiler trace that can catch www.web.com or www.web.com/forumdisplay.php?f=23 calling sp_storedprocedure. Any suggestion is great appreciated.
Thanks
ZYT
I have a SQLDataSource bound to a DetailsView. In which event would I catch a Primary Key violation? Would be an event of the SQLDataSource or the DetailsView? And which particular event? A small example would be great. Thx.
View 1 Replies View RelatedGreetings,
We have a package that runs on 3 servers, all based in different countries and time zones. Each package does logging to a common SQL Server based in New York. (We log to the same server to make monitoring of the package run results easier.) We expect that our overseas servers will occassionally fail to make a database connection and have coded a Try/Catch block in our Script task to ignore errors that occur when attempting the SQL Server logging.
The problem is that the OnError event handler defined at the package level is being called whenever a server fails to make a database connection. The Catch block appears to not be called at all. I've included below the short method that does the SQL Server logging. The "Dts.Log" line logs to a SQL Server and usually works. However, when it fails, the "WriteEventLogEntry" method is supposed to be called to write an error to the server's event log. (I haven't included the "WriteEventLogEntry" code but it works fine when called elsewhere in the package to do our non-error event logging.)
Public Sub WriteSqlServerLogEntry(ByVal logMessage As String, ByVal dataCode As Integer, ByVal dataBytes() As Byte, ByVal rowsInserted As Integer)
Try
Dts.Log(logMessage, dataCode, dataBytes)
Catch ex As Exception
WriteEventLogEntry("An exception was thrown while attempting to log the following message to the SQL Server provider: " + logMessage, EventLogEntryType.Error, rowsInserted)
End Try
End Sub
Shouldn't a Catch block prevent the OnError event from being raised? How can I change my package to ignore all errors that occur when attempting SQL Server logging?
Gracias!
BCB
hi,
i want to execute a finctionX() based on the returned resultset of SQLDataSource. For example, if the SELECT command returns nothing based on a specific search criteria then I want to execute functionX(). Currently, I have a string that displays "No Result" in the GridView in such case.
How to catch the resultset of SQLDataSource?
-nero
Hi all,
I want send messages(e.g. error description,record count...)to NT event viewer,how can I implement with sql?
thanks
Hi,
I'm having trouble with a Script Component in a data flow task. I have code that does a SqlCommand.ExecuteReader() call that throws an 'Object reference not set to an instance of an object' error. Thing is, the SqlCommand.ExecuteReader() call is already inside a Try..Catch block. Essentially I have two questions regarding this error:
a) Why doesn't my Catch block catch the exception?
b) I've made sure that my SqlCommand object and the SqlConnection property that it uses are properly instantiated, and the query is correct. Any ideas on why it is throwing that exception?
Hope someone could help.
hi all,
All of a sudden my application started crashing when trying execute dml statements on sql server mobile database (sdf file). Frustating thing is that whole application crashes without any error message. this happens for all kinds for DML statement but not all the time. Sometimes it would fail for delete statement such as delete from table; or for insert into statement
my problem catch does not catch the error. There is no way to find out teh what is causing this error
SqlCeConnection sqlcon = new SqlCeConnection("
Data Source = '\Program Files\HISSymbol\HISSymboldb.sdf';"
);
SqlCeCommand sqlcmd = new SqlCeCommand();
sqlcmd.CommandText = Insert into company('AA', 'Lower Plenty Hotel');
sqlcmd.Connection = sqlcon;
SqlCeDataReader sqldr = null;
try
{
sqlcon.Open();
//use nonquery if result is not needed
sqlcmd.ExecuteNonQuery(); // application crashes here
}
catch (Exception e)
{
base.myErrorMsg = e.ToString();
}
finally
{
if (sqlcon != null)
{
if (sqlcon.State != System.Data.ConnectionState.Closed)
sqlcon.Close();
sqlcon.Dispose();
}
}//end of finlally
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
Hello, please help!!
I have spent days searching the web and forums for an answer to this simple question and cannot find an example.
I have built a service broker application on sql server 2005. The application puts some xml on an incoming queue which is basically a few parameters to be used in a query. This queue will then call a stored proc which does some business logic and puts the resulting results in another queue also in xml.
I have written a test harness in SQL to put messages on the inbound queue and then some sql to retrieve the returned code from the outbound queue.
What I want to do is be able to convert the SQL which does this into .net code to be used by an application. i.e. write in .net some code to put xml on a queue and then write some .net code to retrieve xml from another queue.
I wouldn't have thought this would be a difficult thing to do and would have been done hundreds of times, but unable to find anything to simply send and retrieve XML to service broker queues....
thanks for your help.. its really needed. I found some links, but they are really vague and often doing select statments in service broker or something like this. I don't want to call any sql, just send and recieve XML on the queues.
any example code that does this, would be really helpfull
kind regards,
David Weeden
Database Developer
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
Hi
for MS SQL 2000
how can I do ?:
INSERT INTO [Users] (Name)
SELECT Names FROM OtherUsers
I am having an UNIQUE INDEX on [Users].Name
how can I avoid an error ?
if the [Users].Name allready exists I want to jump over the error and keep on inserting
thank you for helping
Is it any better than using @@ERROR?
It doesn't seem so
Any opinions?
Brett
8-)
Hint: Want your questions answered fast? Follow the direction in this link
http://weblogs.sqlteam.com/brettk/archive/2005/05/25/5276.aspx
Add yourself!
http://www.frappr.com/sqlteam
Hi!
I'm trying to use Try Catch together with transaction handling but it seems like it doesn't do Rollback although I produce an error.
It looks something like this:
DECLARE @soID INT
BEGIN TRY
BEGIN TRANSACTION
UPDATE Serviceobjekt
SET ServiceobjektstypID = 13
WHERE ServiceobjektID = 26555
UPDATE .... 2 more tables
INSERT INTO Serviceobjekt (
Namn...)
VALUES ('XXXX')
SET @soID = @@IDENTITY
INSERT INTO Atgard (
Namn, ServiceobjektID)
VALUES ('sssss',@soID)
COMMIT TRANSACTION
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK
END CATCH
I get after changing some id's in the where clause which I know is wrong I get a result like this:
(0 row(s) affected)
(0 row(s) affected)
(1 row(s) affected)
(0 row(s) affected)
Shouldn't it be 0 rows affected on all if just one update or insert statement is wrong?
/Magnus
Hi I use Try catch and transactions in one of my stored procedures.
Inside I make a call to another stored procedure.
Is it possible to roll back the outer sp?
Please advise.
Hello!
Try this (-:
BEGIN TRY
SELECT *
FROM NonExistentTable ;
END TRY
BEGIN CATCH
PRINT 'catch me if you can' ;
END CATCH ;
/*
results in:
Msg 208, Level 16, State 1, Line 2
Invalid object name 'NonExistentTable'.
statement not printet */
BEGIN TRY
BEGIN TRY
SELECT *
FROM NonExistentTable ;
END TRY
BEGIN CATCH
PRINT 'catch me if you can' ;
END CATCH ;
END TRY
BEGIN CATCH
PRINT 'catched?'
END CATCH ;
-- same behaviour
CREATE PROC catchme
AS
BEGIN
BEGIN TRY
SELECT *
FROM nonexistingtable ;
END TRY
BEGIN CATCH
PRINT 'catch me if you can'
END CATCH ;
END ;
BEGIN TRY
EXEC catchme ;
END TRY
BEGIN CATCH
PRINT 'catched' ;
END CATCH ;
-- prints "catched"
BEGIN TRY
EXEC catchnonexistingproc ;
END TRY
BEGIN CATCH
PRINT 'catched again' ;
SELECT error_state()
END CATCH ;
-- prints "catched again"
BEGIN TRY
RAISERROR ('catch this' , 10 , 1) ;
END TRY
BEGIN CATCH
PRINT 'hello' ;
END CATCH ;
-- no hello
BEGIN TRY
RAISERROR ('catch this' , 11 , 1) ;
END TRY
BEGIN CATCH
PRINT 'hello' ;
END CATCH ;
-- prints hello
CREATE PROC catchme2
AS
BEGIN
BEGIN TRY
RAISERROR ('catch this' , 10 , 1) ;
END TRY
BEGIN CATCH
PRINT 'CATCH ME IF YOU CAN' ;
END CATCH ;
END ;
BEGIN TRY
EXEC catchme2 ;
END TRY
BEGIN CATCH
PRINT 'gotcha?' ;
END CATCH ;
-- prints only "catch this"
CREATE PROC catchme3
AS
BEGIN
BEGIN TRY
RAISERROR ('catch this' , 20 , 1) ;
END TRY
BEGIN CATCH
PRINT 'CATCH ME IF YOU CAN' ;
END CATCH ;
END ;
BEGIN TRY
EXEC catchme3 ;
END TRY
BEGIN CATCH
PRINT 'gotcha?' ;
END CATCH ;
-- prints "CATCH ME IF YOU CAN" ;-)
See also
-- ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/3a5711f5-4f6d-49e8-b1eb-53645181bc40.htm
The above behaviour is as described in BOL, but
comparing to other languages such as Java, C#, PL/SQL
I would expect that catch always catch unless you take the power from the machine, special
in the case for "catchnonexistingproc". Remark the different behaviour compared to "nonexistingtable"
Documentation shows not example for non existing proc!
That catch doesn't catch "is as bug". So is the catch of non existing proc a bug in the bug? ;^)
I hope not, because it is the behaviour we want...
Greetings
I want to use a try/catch to catch any error with this datareader so if no data then exit sub, eventually I will create custom error pagebut for now I just want to exit sub so following sql statements are not executed. I get the following problem when I try to close connection.this was not a problem before using try and catch, do I have in right place? Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 'declare vars Dim iPreqid As String = CStr(Session("iPreqid")) Dim sql As String = "select * from Vrequest where req_id = '" & iPreqid & "'" 'Connection String value Dim conn As String = ConfigurationManager.ConnectionStrings("LoansConnectionString").ConnectionString 'Create a SqlConnection instance Using myConnection As New SqlConnection(conn) Dim myCommand As New SqlCommand(sql, myConnection) 'declare sqldatareader Dim dbReader As SqlDataReader Try myConnection.Open() myCommand.ExecuteNonQuery() dbReader = myCommand.ExecuteReader 'Initialize reader dbReader.Read() 'assign reader index values using column names to controls Label8.Text = CStr(dbReader("User_Name")) Label11.Text = CStr(dbReader("NHI")) Label9.Text = CStr(dbReader("Event_Number")) Label10.Text = CStr(dbReader("ACC_Number")) Label7.Text = CStr(dbReader("Required_Date")) Label1.Text = CStr(dbReader("Title")) Label3.Text = CStr(dbReader("address1")) Label4.Text = CStr(dbReader("Birth_date")) Label2.Text = CStr(dbReader("surname")) Label5.Text = CStr(dbReader("home_phone")) Label21.Text = CStr(dbReader("firstname")) Label20.Text = CStr(dbReader("delivery")) Label22.Text = CStr(dbReader("ward")) Label23.Text = CStr(dbReader("request_date")) Catch ex As Exception Session("exception") = ex exit sub End Try End Using 'if connection not closed then close If (Not conn Is Nothing) Then myConnection.Close()<---------------------------------------->Name 'myconnection is not declared' myConnection.Dispose()<---------------------------------------->Name 'myconnection is not declared' End If
View 4 Replies View RelatedHi,
Here is the code:Try
If DS.Tables(0).Rows.Count = 0 ThenResponse.Write("Cannot delete an unexist row!")
Response.End()
End If
DS.Tables(0).Rows(0).Delete()
Catch BUG as Exception
Response.Write(Bug.Message)
End Try
I removed all the connection stuff..
What I don't understand is why if ds.table(0).rows.count is zero I still get Bug.Message? I did Response.End ...
Thank you.
Protected Sub detailsview1_ItemDeleting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewDeleteEventArgs)
Dim label2 As Label = CType(detailsview1.FindControl("label2"), Label)
Try
Catch sqlEx As SqlClient.SqlException
If sqlEx.Message.Contains("DELETE statement conflicted with COLUMN REFERENCE") Then
label2.Visible = True
label2.Text = "You cannot delete this Agent Type as it has a call weighting assigned to it, remove the weightings before you try to delete it"
e.Cancel = True
End If
End Try
End Sub Hi, Im using vb.net sql2005 and visual studio 2005
I have 2 tables which have a foregin key relationship. When i try to delete information from within one of my aspx pages it rightly comes up with an application errror, something along the lines of
DELETE statement conflicted with COLUMN REFERENCE constraint 'FK_callScore_agentType'. The conflict occurred in database 'Merlin_####', table 'callScores', column 'typeID'.The statement has been terminated.
I have looked around and can see people talking about using a try catch excpetion however i need to know how id implement this using the detailsview1_itemdeleting event. Ive never used this before and havent found a decent tutorial to help.So far i have this code but im stuck as im not sure that this is correct but more importantly what i put in the try method. Protected Sub detailsview1_ItemDeleting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewDeleteEventArgs)
Dim label2 As Label = CType(detailsview1.FindControl("label2"), Label)
Try
(WHAT GOES HERE)
Catch sqlEx As SqlClient.SqlException
If sqlEx.Message.Contains("DELETE statement conflicted with COLUMN REFERENCE") Then
label2.Visible = True
label2.Text = "You cannot delete this Agent Type as it has a call weighting assigned to it, remove the weightings before you try to delete it"
e.Cancel = True
End If
End Try
End Sub Your help would be greatly appreciated
Hi,
I have the following stored procedure which is added to the windows scheduler. When it is run I'm getting an "Invalid use of null error", therefore I need to capture and any errors but I'm not sure how to do this. Can someone help?
Thanks.
Code:
CREATE PROCEDURE [dbo].[usp_Reminders] AS
DECLARE @ReminderSent datetime
DECLARE @getRecords CURSOR
DECLARE @err int
SELECT E.[RL Staff No], E.Forename, E.Surname, C.CourseName, V.CourseDate , E.Email, V.ReminderSent
FROM empdetails.dbo.v_Employee E
INNER JOIN Validation V ON E.[RL Staff No] = V.[RL Staff No]
INNER JOIN empdetails.dbo.v_Course C ON V.CourseCode = C.CourseCode
WHERE V.Completed Is Null AND V.ReminderSent Is Null AND V.CourseDate <= dateadd(dd, -3, getdate())
order by e.[rl staff no]
SET @getRecords = CURSOR FOR
SELECT V.ReminderSent
FROM empdetails.dbo.v_Employee E
INNER JOIN Validation V ON E.[RL Staff No] = V.[RL Staff No]
INNER JOIN empdetails.dbo.v_Course C ON V.CourseCode = C.CourseCode
WHERE V.Completed IS NULL AND V.ReminderSent IS NULL AND V.CourseDate <= dateadd(dd, -3, getdate())
ORDER BY e.[rl staff no]
OPEN @getRecords
FETCH NEXT FROM @getRecords INTO @ReminderSent
WHILE @@FETCH_STATUS= 0
BEGIN
UPDATE Validation
SET ReminderSent = GetDate()
WHERE CURRENT OF @getRecords
FETCH NEXT FROM @getRecords INTO @ReminderSent
END
CLOSE @getRecords
DEALLOCATE @getRecords
GO
HI,
i'm trying to execute some sql using the Try.. Catch blocks.
Following code does not execute in Catch Block
Begin
begin try
insert into dbo.Test values (1,'aaa')
-- here we are inserting int value in identity field...
END TRY
Begin catch
PRINT 'TEST'
SELECT
ERROR_NUMBER() AS ErrorNumber,
ERROR_SEVERITY() AS ErrorSeverity,
ERROR_STATE() as ErrorState,
ERROR_PROCEDURE() as ErrorProcedure,
ERROR_LINE() as ErrorLine,
ERROR_MESSAGE() as ErrorMessage;
END Catch
End
GO
Whereas the following block works fine and the Catch block executes.
Begin
begin try
Select 1/0
--This causes an error.
END TRY
Begin catch
PRINT 'TEST'
SELECT
ERROR_NUMBER() AS ErrorNumber,
ERROR_SEVERITY() AS ErrorSeverity,
ERROR_STATE() as ErrorState,
ERROR_PROCEDURE() as ErrorProcedure,
ERROR_LINE() as ErrorLine,
ERROR_MESSAGE() as ErrorMessage;
END Catch
End
GO
Any idea why is it so?
can someone help me how to corect the query,
BEGIN TRY
INSERT INTO ORDERS VALUES( 1122,'BAC123' );
INSERT INTO ORDLINE VALUES( 1122,991,1 );
PRINT 'VERY GOOD'
END TRY
BEGIN CATCH
PRINT 'FALSE'
INSERT INTO LOGTAB ('BAC123',1122,991,1, ERROR_NUMBER,ERROR_MESSAGE);
END CATCH
i am getting error:
Msg 102, Level 15, State 1, Line 11
Incorrect syntax near 'ERROR_NUMBER'.