Hi there
Assuming this is the query used to return this result:
select dept.name, count(prj.id) from department dept, project prj where prj.id = dept.uid group by dept.name
Dept, TotalProj
A , 10
B , 5
C , 2
Question: How do I change the query so that the result will return as follows:
Dept/TotalProj
A, B, C
10, 5, 2
I have a db; that stores a company name; if the end user types in
The Stoneware Jar Company
I would like to display:
Stoneware Jar Company
All company names entered like that with no preceding "The"
How can I display something diff on my ASP Page? Possible?
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
Dear FriendsI need to get the data in the required format. Please help----------------------Table TripSheet----------------------Id,TSNo.,JourneyDate(ddmmyy),CustName,RateType,VehicleNo., BillId, journey hours, journey kmDATA
1, 234, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM2, 235, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 3 hrs, 30 KM3, 236, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM4, 237, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 4 hrs, 40 KM5, 238, 5-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM
6, 239, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM7, 240, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 3 hrs, 30 KM8, 241, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM9, 242, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 4 hrs, 40 KM10, 243,5-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM----------------------------Table BillTripSheet-----------------------------Id,BillId,VehicleNo., TotalJourneyHours,TotalJourneyKM,SlabApplied, MinAmt, ExtAmtDATA
1, 234, Vehi45, 13hrs, 250km, SlabA, 500, 502, 234, Vehi99, 13hrs, 250km, SlabA, 500, 50
I need to display data to be displayed in the following format in report(grouping based on vehicle no.)
1, 234, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM2, 235, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 3 hrs, 30 KM3, 236, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM4, 237, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 4 hrs, 40 KM5, 238, 5-1-2007, Samson Pvt.Ltd, BPORates, Vehi45, 234, 2 hrs, 60 KM----------------------------------------------------------------------------------------------------------1, 234, Vehi45, 13hrs, 250km, SlabA, 500, 50---------------------------------------------------------------------------------------------------------
6, 239, 1-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM7, 240, 2-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 3 hrs, 30 KM8, 241, 3-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM9, 242, 4-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 4 hrs, 40 KM10, 243,5-1-2007, Samson Pvt.Ltd, BPORates, Vehi99, 234, 2 hrs, 60 KM----------------------------------------------------------------------------------------------------------2, 234, Vehi99, 13hrs, 250km, SlabA, 500, 50----------------------------------------------------------------------------------------------------------
The Calculation logic is lengthly and the number of records involved is huge.also, only the manager has authority to generate the Bill and rest of the team can view the bill report
So i cannot do the calculations while fetching the records, Bill has to be generated and stored. How do i write the query to fetch the data from the two tables "TripSheet" and "BillTripSheet" ? Please Help
ReagardsSara
I have a table that I am trying to query to display all data connected to a id in one row. What is the best way to achieve this?
Something like this:
ID| CRS1 | CRS2 | CRS3| CRS4 ....
1 | A101 | A102 | A103 | A104 ....
CREATE TABLE Class
(
id int,
yr int,
trm varchar(2),
crs varchar(30)
[Code] .....
Hi,In my application, I need to copy data from an Excel file into a SQLtable. The article related to this can be found athttp://support.microsoft.com/defaul...Ben-us%3B306572Using this,I am first extracting data from given excel file into atemporary DataTable. After making some operations on that DataTable(like splitting one column into two), I am saving the data into actualtable in SQL Server.My doubt is that, in the above given link, there are few steps neededto do on the excel file... eg.--> Highlight the rows and columns where the data resides.--> On the Insert menu, point to Name, and then click Define.--> In the Names in workbook text box, type myRange1, and then clickOK.I don't want my client to do thsese operations everytime he changescontents in that excel file, as this excel file changes almost daily.The extracting of data from excel file is done after clicking UPDATEbutton on webpage. The person saving data into Excel file is differnetfrom the one who updates it into SQL.Is there any other way where we can directly copy data from excel fileinto DataTable without doing the above three steps?I am using Visual Studio.NET 2003,SQL Server 2000 and C# as developinglanguage for this web-based project.Any advice would be greatly appreciated. Thanks in advance.Regards,RK.
View 4 Replies View RelatedHello,I have a (big) table which is not normalized, but for i need at themoment i thinkthat's no problem. Indeed, what i would like to do is to select thename field andthe note. The problem is that i want to display the note in 2different columns.the first columns will show the number (count) of time that a certainnote (e.g note=4)appears for a certain name and in the other column the same thing butfor a different note value.so each column noteX will display the number of time that the notewith the value X appears for each namefor example, to the following table:Name | note | job | city | id |----------------------------------------john | 4 | jb1 | hamb | 1 |john | 5 | jb2 | hamb | 2 |john | 5 | jb3 | hamb | 3 |john | 5 | jb4 | hamb | 4 |Mark | 4 | jb1 | mun | 5 |Mark | 4 | jb2 | mun | 6 |Mark | 4 | jb5 | mun | 7 |Mark | 5 | jb1 | mun | 8 |peter | 5 | jb3 | berl | 9 |peter | 5 | jb5 | berl | 10 |frank | 4 | jb6 | v.form | 11 |frank | 5 | jb3 | v.form | 12 |frank | 5 | jb2 | v.form | 13 |the result should be:Name | note5 | note4 |-------------------------john | 3 | 1 |Mark | 1 | 3 |peter | 2 | 0 |frank | 2 | 1 |How should be the right SQL command to show the data i want?Rui DiasJoin Bytes!Thanks a lot
View 5 Replies View Relatedi someone had teach me how to write a query in datatable. however i need to get the data out from my database rather than the data table. can someone teach me how should i do it?esp at the first like.... like DataTable dt = GetFilledTable() since i already have set of data in my preset table i should be getting data from SqlDataSource1 right ( however i am writing this in my background code or within <script></script> so can anyone help me? protected void lnkRadius_Click(object sender, EventArgs e) { DataTable dt = GetFilledTable(); double radius = Convert.ToDouble(txtRadius.Text); decimal checkX = (decimal)dt.Rows[0]["Latitude"]; decimal checkY = (decimal)dt.Rows[0]["Longitude"]; // expect dt[0] to pass - as this is our check point // We use for rather than fopreach because the later does not allow DELETE during loop execution for(int index=0; index < dt.Rows.Count; index++) { DataRow dr = dt.Rows[index]; decimal testX = (decimal)dr["Latitude"]; decimal testY = (decimal)dr["Longitude"]; double testXzeroed = Convert.ToDouble(testX -= checkX); double testYzeroed = Convert.ToDouble(testY -= checkY); double distance = Math.Sqrt((testXzeroed * testXzeroed) + (testYzeroed * testYzeroed)); // mark for delete (not allowed in a foreach - so we use "for") if (distance > radius) dr.Delete(); } // accept deletes dt.AcceptChanges(); GridView1.DataSource = dt.DefaultView; GridView1.DataBind(); }
View 2 Replies View RelatedI have to display the data in the below said formats..Current sample Data in the table and the data type is numeric(23,10)
50.00
0.50
0.00
0.00
To be displayed in the below format
1.25
0.75
0
0
1
I have to map this column in teh report and should dipslay like above.I think if 0.00 is available then it should display as 0..If 1.0 is available then it should display 1.Any value that has postive number after the decimal should display all the values  example : 2.25,3.75,5.06, So in general the solution to display values like 1.75,1,0 we should not dispaly 0 as 0.00 and 1 as 1.00 and 2 as 2.00 and so on...Any Solutions in terms of SQL query  or SSRS expression.
Hi everyone,
I’ve got a small question: Is it possible to change the Column_Name – Data Type from a SQL table with a query?
I want to do this with a query.
The Data Type ‘ntext’ must be changed to ‘text’
Thanks in advance!
Hi All,
I have some problems when changing and running report subscription in the existing data-driven Email subscription using console app.
arg[0] is the ReportID
and arg[1] is the permissionkey
I passed these parameters in command_line when I call the executable. (e.g RunSubscription.exe 1 2)
After I run my application, the query changed successfully,
however, I didn't get the email from the subscription So I checked the subscription status,
Error: Cannot create a connection to data source ''.
If I remove the get & set subscription property codes, then application runs fine but then I can't change the query on the fly. Please help!!! I will be very appreciate if someone can give me some helps or suggestion.
static void Main(string[] args)
{
ReportService.ExtensionSettings ExtensionSetting;
ReportService.DataRetrievalPlan DataRetrievalPlan;
String Description;
ReportService.ActiveState ActiveState;
String Status;
String EventType;
String MatchData;
ReportService.ParameterValueOrFieldReference[] Parameter;
ReportService.ReportingService2005 MyRS = new ReportService.ReportingService2005();
MyRS.Credentials = System.Net.CredentialCache.DefaultCredentials;
ReportService.Subscription[] subs = MyRS.ListSubscriptions("/MyReports/" + args[0], null);
if (subs != null)
{
int i=0;
while (i < subs.Length)
{
// Get Subscription Property
MyRS.GetDataDrivenSubscriptionProperties(subs.SubscriptionID, out ExtensionSetting, out DataRetrievalPlan, out Description, out ActiveState, out Status, out EventType, out MatchData, out Parameter);
//set the query based on parameters
DataRetrievalPlan.DataSet.Query.CommandText = "exec dbo.GetReportPermission @ReportID=" + arg[0]+ ", @RegionPermission=" + arg[1];
MyRS.SetDataDrivenSubscriptionProperties(subs.SubscriptionID, ExtensionSetting, DataRetrievalPlan, Description, EventType, MatchData, Parameter);
MyRS.FireEvent(sets.EventType, subs.SubscriptionID);
Console.WriteLine("Event Fired: "+ subs.SubscriptionID);
i++;
}
}
} //main
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
I have a column in the following select startement called displayvalue. Displayvalue is a varchar column. Primary everything entered into this column is numeric, but there are times when NR is entered. In the select query if it sees NR, I would like to have NR changed in the resultset to NULL or blank. NR doesn't come up all of the time, but I have not idea how to do this in the select statment.
Here goes..
SELECT SAMPLE.SAMPLEID, SAMPLE.U_WORKORDERNUMBER, SAMPLE.U_SAMPLEDATETIME, SDI.PARAMID, SDI.DISPLAYVALUE
FROM SAMPLE SAMPLE, SDIDATAITEM SDI
WHERE ( (SAMPLE.SAMPLEID = SDI.KEYID1) AND
(SAMPLE.U_WORKORDERNUMBER = '0060') AND (SAMPLE.U_SAMPLEDATETIME > '31-DEC-2003') AND (SDI.PARAMID = 'BOD') )
ORDER BY SAMPLE.SAMPLEID ASC, SDI.PARAMID ASC
Hi,
Is it possile to definea custom format for the 'display format' property of a measure so that the results are shown in Thousands or Millions or Billions e.g
100,000 can be shown either as 100T
OR
1,000,000 can beshown as 10M
OR
10,000,000 1B
Sorry if I got my numbers wrong but I hope you get the idea?
Looking forward to your help. Thanks
All of the subscription emails that go out has a "From" display name of "POP3", so when the receipients receive the email, they see "POP3" in the "From" field. I would like to change this so ill-informed users don't delete the emails thinking they're junk/virus email.
Of course if the email software being used by the receipients doesn't support displaying a "From" name, then only the actual email will show and, in that case, it will be perfectly fine.
I'm trying to account for the less-than-educated end-users with minimal literacy in computers.
Does anyone know how to change this? Thanks!
Hi,
I am using SQL Server 2005 Analysis Services and Reporting Services with Visual studio 2005 Professional Edition. I have developed couple of reports in visual studio 2005 environment using report server project of business intelligence projects.
In one of my report I am using MDX query which is created using Query Builder of Report wizard. Once I finished with report wizard a report created and shown with data, layout and preview tabs. I can preview the report. But, when I click on data tab there is no MDX query exists. After that I can't even preview the report.
Please let me know how can I solve this issue
Thanks
Yaksh
I am interested in changing the way that data is displayed in my result set.Essentially I want to display a selection of rows (1 to n) as columns, the following diagram explains my intentions.Perhaps one of the greatest challenges here is the fact that I do not have a concrete number of rows (or BIN numbers). Each stock item could be stored in one or more BINS, which I will not know until running my query.
View 2 Replies View RelatedI want to change the display message when else is 0 to show "non active member", how to edit this query for this result .
---------------------------------------------------------------
Current Query
cast(sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) as varchar(10))+ ' Active Member := '+ user_member
---------------------------------------------------------------
I try this query but not work and prompt error.
cast(sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else "non active" end) as varchar(10))+ ' Active Member := '+ user_member
----------------------------------------------------------------
I have a report parameter named "Schools" which display a list of schools. For example, Alo elementary school, Balo middle school and Calo high school.
When "Alo elementary" is selected the report only display students from that school along with other assessments data fields. same goes for other schools too. But I want to display different data fields for "Calo high school" when it is selected. It is not currently possilbe becasue I am using the same template for all types of schools. There some fields only should be displayed for "Calo high school" but not for any other type of schools.
I can accomplish this by creating two separate report, one for "Calo high school" and the other for other schools. But I want to accomplish this just by creating one report. So when "Alo elementary school" is selected it displays report with certain fields and when "Calo high school" is selected then it displays same fields as "Alo elementary school" but as well as some other fields too in the report. Is this possible? Need help.
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedI am trying to display hirearchical data using data region. For eg. the first level will be a list of customer names. The second level will be a list of Invoices under each customer. The third level will be a list of product names that were sold under each invoice.
I used a list for the data region and in each hireachy, there is a textbox in each list to display the data. I am trying to associate each data region with a datatable (I will provide the logic to populate the datatable with appropiate data). I do not want the ReportViewer to interact directly with a database because this is a 3 tier design and I am using the ReportViewer in local mode. I couldn't find any example of these. Can anybody help? Also I would like to see an example of the .rdlc file in these situation. Thanks very much.
Kam
I have query that return statuses and their totals, the data looks like:
StatusCode Total---------- ---------A 100PS 50SI1 9SI2 8etc...
The query returns over 30 totals, but I only want the top 9 totals plus others (the rest of the totals combined) .
How do I go about this query?
StatusCode Total---------- ---------A 100PS 50SI1 19SI2 18SI3 9SI4 8PS1 6PS2 6PS3 6Others 99
Also, have it work for queries that have 9 or less totals?
Hi,
I have this query:
Dim strSQL As String = "SELECT Ticketreply.Status, TicketReply.ReplyID, TicketReply.AssignedTo, TicketReply.ReplyName, TicketReply.Reply, TicketReply.Attachment, TicketReply.LastUpdated, TicketReply.Priority FROM TicketReply INNER JOIN TicketThread ON TicketThread.TicketID = @TicketID WHERE (TicketReply.TicketID = @TicketID) ORDER BY TicketReply.LastUpdated"
How in the gridview do I display all the results bar the first record?
It does this at the moment:
First
Second
Third
I want it to display like this:
Second
Third
So it misses the first row.
Hopefully easy for you Pro's!
Any help appreciated.
Cheers, Ricky
I am trying to count the number of Part that is repaired and those that is not repaired, is there a way to combine the following into one result set instead of returning 2? The bold line is the only condition that's different between this 2 query.
I want to display these fields: date_complete, part_categoryid, part_model, repaired, not_repaired
/* parts being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as repaired from tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 0 and part_flag_ntf = 0 and part_flag_beyondrepair = 0)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid,part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)
/* parts completed but not being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as not_repaired from tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 1 or part_flag_ntf = 1 or part_flag_beyondrepair = 1)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid, part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)
I have I rather complex query and need to display a Sum in different ways. Now I'm wondering if the performance improves if you nest the queries in the described way. To me it looks, as if the sum just has to be calculated once?
select SUM(tiempo) as time_minutes,
CONVERT(varchar(5), dateadd (minute,sum(tiempo),'1900-1-1 0:00'), 114) as time_hours,
SUM(time)* 0.95 as time_discount
from table
Select tiempo as time_minutes,
CONVERT(varchar(5), dateadd (minute,tiempo,'1900-1-1 0:00'), 114) as time_hours,
tiempo * 0.95 as time_discount
From (
Select Sum(tiempo) as tiempo
from table)a
I have table that contains below data
Date                             ID           Â
Message
2015-05-29 7:00:00     AOOze           abc
2015-05-29 7:05:00     AOOze           start
2015-05-29 7:10:00     AOOze           pqy
2015-05-29 7:15:00     AOOze           stop
2015-05-29 7:20:00     AOOze           lmn    Â
[code]....
and so on following the series for every set of different ID with 5 entries.I need to Find Maximum interval time for each ID and for condition in given message (between Start and Stop)For example, in above table
-For ID AOOze, in message "start" is logged at 7:05 and stop and 7:15, so interval is 10 mins
-For ID LaOze, in message "start" is logged at 7:30 and stop and 7:45, so interval is 15 mins
I am looking for a sql query that will return in below format
IDÂ Â Â Â MAX interval
AOOze  15
LaOze  10
Hello everybody,I want to ask how to create query use the solve the problem of this..Example : I want to display the month january between february... Sorry if my english is not good...Thank you...
View 3 Replies View RelatedI have a table where the ID column is a forign key as shown below:
select * from Joel_Table
IDID_Value
1One
2Two
3Three
1Four
2Five
3Six
1Seven
2Eight
3Nine
1Ten
Now, I order the result set based on the ID column:
select ID, ID_Value from Joel_Table
group by ID, ID_Value
order by ID, ID_Value
IDID_Value
1Four
1One
1Seven
1Ten
2Eight
2Five
2Two
3Nine
3Six
3Three
I want though to order the result set as one ID per row:
ID ID_Value ID_Value ID_Value ID_Value
1 Four One SevenTen
2 Eight Five Two
3 Nine Six Three
What is the best way of accomplishing this task?
Thank you much in advance -
Hello,
I have two tables, Promotion and Promolocation. The Promotion table is used to set up promotions or sales, and consists of a PromoID, StartDate, and EndDate. Each PromoID is referenced in the Promolocation table, which is used to assign items to a promotion for various locations or stores. The Promolocation table consists of PromoID, LocID, SkuID, PromoPrice, and DiscLevel.
There are times where an item or SkuID will exist in more than one promotion, however, our application is currently not intelligent enough to determine which promotion to use, so it sets the active promotion based on the StartDate being before other promotions' StartDate and the EndDate being after other promotions' EndDate.
I want to find all promoid's where a sku exists in more than one promotion. I want to signify which promotion is active, using 1 as the first active promotion, 2 as the next active, 3 as the next, etc. To determine which promotion is the first active promotion, the StartDate must be before any of the other promotions' StartDate, and the EndDate must be after other promotions' EndDate. If the promotions' StartDate is after the other promotions' StartDate but not before the other promotions' EndDate, and the EndDate is before or on other promotions' EndDate, then that's the second active promotion. If the StartDate is the same as other promotions' StartDate, but the EndDate is before other promotions' EndDate, then that's the third active promotion.
For example:
PromoID StartDate EndDate
------- --------- -------
PROMO1 1/1/2004 1/1/2006 (1st Active Promotion)
PROMO2 2/1/2004 1/1/2006 (2nd Active Promotion)
PROMO3 1/1/2004 12/1/2005 (3rd Active Promotion)
Here's a query I am using to display all active promotions:
select
pl.promoid,
pr.startdate,
pr.enddate,
pl.locid,
pl.skuid,
pl.promoprice,
pl.disclevel
from
promolocation pl
inner join
promotion pr
on
pl.promoid = pr.promoid
where
pr.enddate >= getdate()
Thanks for your help.
D
Hi,
I don't know if anyone has encountered this before but here goes:
I've a select clause below:
result = "Select * from person where LocalName LIKE N'" + queryLocalName + "'"
queryLocalName is an input field that allows the user to search for non-English characters in the database.
What I'm wondering is what kind of effect is the N in the where clause is having?
I can't seem to get it to work when doing it via the web. I've tested in the database itself, got it to work using the SQL Analyser but when testing on the web, it can't find because ? are appearing in the result.
For the following query, I am trying to fetch only one row (no duplicates) for each BL_ID based on the logic that if I have multiple rows for one BL_ID, then only the one which has the largest LEG_SEQ_NBR should be displayed and the other rows should be ignored.
I am using the below code get to the above logic:
ROW_NUMBER() OVER (PARTITION BY ITIN.BL_ID ORDER BY ITIN.LEG_SEQ_NBR desc) AS RowNum
select
*
FROM
(
SELECT
TMIS.[BL_ID]
,[POL_NAME]
,[POD_NAME]
[code]....
where rownum in (1,2)
Hi Guys,
Below is example of the current structure of table1 I have at run time:
------------------------
GroupName Resourcename Week1 Week2 ..cont.. dynamically
Associates A1 0 80 ......
Assocaites A2 20 40 ......
Associates A3 50 100 ......
Principal P1 20 100 ......
Principal P2 0 0 ......
Principal P3 0 100 ......
------------------------
I want to change the above to something like below table2:
---------------------------
GroupName Status Week1 Week2 ....cont
Associates Assigned 2 3
Associates NotAssigned 1 0
Principal Assigned 1 1
Principal NotAssigned 2 1
---------------------------
I will try to explain how I am deriving table2 from table1. I have to count the number of Resource name against each Groupname for a particular week column(Weeki i 1 to n dynamic) where value of Week column is 0, then use this numbber against NotAssigned and the complementary number to be stored as Assigned.
The table formaating is lost in HTML view but just consider any gaps between fields as next column value.
Am I clear in what i am asking , if not please ask me.
Any help will be highly appreciated.