How To Change Default Backup Destination To The Other Folders ?

Aug 4, 2007

By default,when I would like to back up any database by SSMS.

default destination on disk will be C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup   every time 

 Although I everytime change it to my backup folder.

 

Please let me know how to change it.

View 1 Replies


ADVERTISEMENT

Change Backup Default Directory

Aug 30, 2002

WE HAVE RECENTLY MOVED THE MSSQLBACKUP FOLDER TO EMC DRIVES E:, BUT SQL IS STILL DEFAULTING BACKUPS TO THE ORIGINAL DEFAULT LOCATION WHICH WAS ON THE D: DRIVE. DOES ANYONE KNOW HOW TO CHANGE THIS? I KNOW THE ORIGINIAL LOCATION IS STORED IN THE REGISTRY, BUT I DON'T KNOW IF I CAN CHANGE THE REGISTRY OR IF THERE IS A DIFFERENT PLACE. CAN SOMEONE PLEASE HELP.

THANKS

View 2 Replies View Related

How To Change The Default Backup Data Directory In SQL Server 2000?

Dec 29, 2006

Hi,

I had SQL Server 2000 installed like below:

Installation Directory = C:Program FilesMicrosoft SQL Server

Default data directory = D:

Default log directory = D:

I found out that the data is stored in D:Program FilesMicrosoft SQL ServerMSSQLdata and backup is done in D:Program FilesMicrosoft SQL ServerMSSQLackup

However, Microsoft says we should never put the ..ackup and ..data folders in the same partition.

My question is: How can I move the path of the backup directory?

I checked the registy but this is what I found:

HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServerMSSQLServer

..BackupDirectory=C:Program FilesMicrosoft SQL ServerMSSQLackup (<-- note it is pointing to C: not D:)

..DefaultData=D:

Can somebody help please?

View 3 Replies View Related

SQL Server 2008 :: Delete Folders / Sub Folders Older Than N No Of Days

Jul 30, 2015

If I run the below command, it clean up the files inside the folders but unable to clean up the folder and sub-folders older than 30 days. xp_ cmd shell ' forfiles -p "D:abcd" -s -m *.* -d -30 -c "cmd /c del /Q @path"'

View 4 Replies View Related

SQL 2012 :: LocalDB Cannot Restore A Backup Whose Original Data And Log Files Are In Different Folders

Dec 29, 2014

LocalDb cannot restore a backup whose original data and log files are in different folders

[URL]

View 1 Replies View Related

T-SQL (SS2K8) :: Function To Create Folders (and Sub Folders)

Jun 5, 2014

I'm using sp_OACreate in a scalar function to create a folder if it doesn't exist, and it works fine if you're asking it to create a single folder. For instance: C:Newfolder

It creates "Newfolder"

However, if I try to ask it to create C:NewfolderNewsubfolder

It doesn't work

Here's the code:

DECLARE @Exists int, @ObjFile int, @ObjFileSystem int, @Folder nvarchar(500) = 'C:',
@Action tinyint = 1 --(0 to check if folder exists, 1 to actually create it)

EXEC dbo.sp_OACreate 'Scripting.FileSystemObject', @ObjFileSystem OUT
EXEC dbo.sp_OAMethod @ObjFileSystem, 'FolderExists', @Exists OUT, @Folder

[Code] .....

View 1 Replies View Related

SQL Server 2008 :: Count Number Of Backup Files Deleted From A Default Backup Location

Mar 13, 2015

I've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...

/* Script to delete older than N days backup from a specific directory */

USE [db_admin]
GO
IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL
DROP PROC usp_DeleteBackup
GO

[Code] .....

View 2 Replies View Related

The Data Flow's Default Destination Component

Dec 10, 2007

Is there a default destination component used when a new data flow is created? The reason I ask is simply curiosity. I have an xml file with 2 pieces of data: item A and item B. A should simply get copied out of the file. B should undergo a quick transform. I set up an XML source such that two columns are mapped correctly to the XML source data of A and B. I set up my data transform task as well. So, if I leave those two components on the .dtsx page with no other components, then will there be a default data flow destination already created? ...OR, do you always have to have a destination component?

Thanks for the input. I am just curious.

View 4 Replies View Related

Change The Name Of The Destination File

Jul 2, 2002

Hi,
I am exporting a table to an excel format. The package should change the name of the destination file everytime the package is executed(preceded by date). I need to deploy this urgently.

View 4 Replies View Related

Change Default

Apr 7, 2005

When I was using ALTER TABLE to create a new field, I accidentally type the wrong word as the DEFAULT.

I typed
ALTER TABLE mytable ADD reporting VARCHAR(15) NOT NULL DEFAULT 'Monthl';

I did not want 'Monthl', I wanted 'Month'.

How do I change it, drop it, modify it?

I've been looking through the on-line info from MS and I and very confused.

View 1 Replies View Related

Change Default Collation ?

Oct 23, 2003

SQL Server 2000: Is it possible to change SQL server's default collation without reinstall ?

View 3 Replies View Related

Is There A Way To Change The Default Instance?

May 20, 2004

We installed SQL 7.0 first, then SQL 2000. SQL 7.0 is the default instance.

How can we change the default to SQL 2000?

View 5 Replies View Related

How To Change The Default Values

Nov 13, 2006

The columns fro which we do not enter any values.Fro eg in my table i did not insert any values to Balance col,in my table.
In SQL 2005,management studio,when i said modify table and changed the default to 0 from NULL and also unchecked the checkbox saying Allow Nulls.

I did the above changes and said save.It gave an error saying

'AccountsBalance' table
- Unable to modify table.
Cannot insert the value NULL into column 'Balance', table 'AccountBalanceSheet.dbo.Tmp_AccountsBalance'; column does not allow nulls. INSERT fails.
The statement has been terminated.

Plz help

Poornima

View 2 Replies View Related

How Do I Change The SQLEXPRESS Default Instance Name

Aug 18, 2006

Is this the only way to rename the default SQLEXPRESS instance name?
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811
Is there an easier way?  I tried going to Register and changing it.. but that didn't seem to do anything.

View 3 Replies View Related

Change Default Database Path

May 26, 2006

Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server  it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!

View 2 Replies View Related

Change Default Colume Values

Feb 8, 2001

Hi, all, does anyone know of a way to change default values inside of a table without affecting existing values?

I have a table with default = 0 in usermask column. Some rows already have non 0 values in them. I now need to change the default to 1 but still want the non 0 values be there. I also want the new default to take effect when new rows are entered. What's the best and quickest way to do it?

Thanks for advice.


Richard

View 2 Replies View Related

How To Change The Default Port Number

Jul 15, 2004

hai all,
I need to change the default port number of the SQL server from 1433 to some other port number. i know that it can be done thru SERVER NETWORK UTILITY. Can some one confirm that. It will be helpful.
Also i want to make sure that port to given is free port. how can i find that particular port is free.

Thanking in Advance, awaiting Quick response.

Signing Off
Venkatesh.V

View 1 Replies View Related

Change Default Location Where New DB's Are Created

Jul 19, 2007

Hello
The default location where db's are created is almost full.
Is there any way to change the default location where the .mdf and .ldf are created when I create a new db? I know I can do this when I create a new db and go select where I want it to be, but can I make it default to a different directory automatically so no human intervention is needed?
tia
r/P

View 1 Replies View Related

How Do I Change The Default Database In Sql Server

Dec 19, 2007

Does anyone know how to change the default database in sql server 2005, I keep getting an error.

View 1 Replies View Related

Stored Procedure To Change Default

Dec 14, 2005

Can someone explain to me why the following doesn't work?declare @oname sysnameselect @oname=name from sysobjects where name like"df__mytable__mycol%"alter table mytable drop constraint @oname

View 4 Replies View Related

How To Change The Default Dateformat For Database

Aug 17, 2007

Hi,


I want to change the default date format from 'mdy' to 'dmy'. I can do this for session by using
SET DATEFORMAT 'dmy'
but I want to this permanent on Database level (preferred) or SQL instance level how can I do this?


Thanks in advance

View 1 Replies View Related

DB Engine :: Change Default Trace Value

Sep 3, 2014

I am trying to change the default trace value from 2 to 6, to incorporate rollover and server shutdown.  I am using this code to create a new trace (with id: 2) with the value of 6 and use that to overwrite the default trace (with id: 1):

    DECLARE @new_trace_id INT;
    EXECUTE master.dbo.sp_trace_create
      @someinteger = @new_trace_id OUTPUT,
      @someinteger = 6,
      @someinteger = N'C: raceTestTrace';

Then I disable the default trace.  I am then using this code to overwrite the default trace (with id: 1) and replace with new value default trace (with id: 2):

       -- get trace status 
       SELECT * FROM ::fn_trace_getinfo(NULL)
       -- stop trace
       EXEC sp_trace_setstatus @traceid = 1 
                    , @status = 0  
       go 
        -- delete trace
       EXEC sp_trace_setstatus @traceid = 1 
                    , @status = 2

Then I enable the default trace.  It works perfectly (default trace with id 1 is showing value 6) until I restart.  Upon restart no default traces are enabled, once I run the script to enable the default trace then the values for the default trace (with id: 1) are back, and my value for rollover/server restart is back to 2.

View 12 Replies View Related

Change The Server Name Does Not Default Usenames

Sep 18, 2007

Hi :
I am in the process of testing server name on which sqlserver is running.In this process i could sucessfully rename the server and bring the database online.I have renamed the server name in the system tables by using sp_dropserver and addserver .But still in the security logins i can see the agent logins not reflecting the change .
Oldservername SQLServer2005SQLAgentUser$oldservername$MSSQLSERVER.How can i modify these names.
thanks
Ganesh

View 2 Replies View Related

How Do I Change Default Database Locations?

May 17, 2006

The area to change my default database location is "greyed" out. I wish to put all my data on a seperate drive than the OS (D:). What am I missing that I can't change the default database location?

View 1 Replies View Related

How To Change Default Report Paramtere Name

Aug 7, 2007

Hi All

How to change default report paramter name to user defined parameter name in SSRS 2005.



Thanks
Dinesh

View 7 Replies View Related

How To Change The Default Page Of ReportServer

Apr 17, 2008



Hi All,
I need to change the default page that comes when i hit http://localhost/ReportServer in my browser.
Instead of listing the folders and reports i want to show my own page.
Is it possible to that?
Thanks
Looking forward to your replies

View 1 Replies View Related

How To Change Default Path For Database Creation

May 1, 2007

Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??

View 10 Replies View Related

How Do I Change The Default Collation String Of An Installation

Mar 22, 2006

HiWhen we installed SqlServer2000 we left the default collation name(Sql_Latin1_General_CPI_CI_AS).The user defined databases we created afterwards were defined with adifferent collation name in order to be able to accept the character setwe use, Hebrew.We are looking into switching DTSs that we use to copy data from ourmain system , that uses an Ingres database, into OSQL scripts. Althoughthe DTSs successfully copy the Hebrew letters when I copy data with OSQLit comes over as jibberish.After looking into the matter I came to the conclusion that while DTSrefers to specific databases and uses the destination database'scollation name , OSQL refers to the remote server and destination serverand therefore uses the collation name of the server and not of thedatabase. In order for it to successfully copy the Hebrew I need tochange the default collation name of the installation.Is "rebuild master" the way to do such a thing ? (this is a productionserver so we are wary of doing a "rebuild master")Has anyone else run into similar problems when transfering data betweenservers using OSQL ?ThanksDavid Greenberg

View 3 Replies View Related

How To Change Default Data Directory For SQL 2005

Sep 29, 2006

Hi, I've installed SQL 2005 and failed to change the default datalocation during installation. Now I want to change it. Can I do thiswithout having to uninstall and reinstall? And furthermore, is there asystem stored procedure I can use to move existing data and log files(master, msdb, AdventureWorks, etc.)? I seem to remember doing justthis with SQL 2000 some time back.Thanks,Eric

View 2 Replies View Related

Replication :: Change Snapshot Default Location

May 13, 2015

How to change the default snapshot folder (Merge Replication) location in SQL Server 2012 Standard Edition? Actually that field is grayed out.

View 3 Replies View Related

How To Change Default Installation Path For SQLCE

Feb 1, 2007

Hello,

My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.

I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.

Thx,

Uri

View 3 Replies View Related

How To Change Default Database 'root Directory' ?

Feb 27, 2006

Hi folks,

Can you please tell me how should I change the default root directory (used for db storage) in SQL 2005 Std. Edition. ?

Currently its configured to:
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
and I want to change the drive letter here.

Thanks in advance.
Cyk

View 4 Replies View Related

Please Help Me! How Do You Change The Default Server In Visual C# Express?

Jun 14, 2006

I have had visual C# Express edition for a while, and had successfully used SQL Server 2005 express successfully since it was first released. I downloaded the new version with advanced services, created a new instance, and tried to use it. VC# wont connect cause it is still trying to connect to my old instance which no longer exists. Could someone please tell me how to make my new instance the one to log on to?

Thanks in advance,

Kent

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved