How To Change Default Installation Path For SQLCE

Feb 1, 2007

Hello,

My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.

I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.

Thx,

Uri

View 3 Replies


ADVERTISEMENT

SQL 2005 Default Installation Path

Dec 13, 2006

In sql 2000, during the installation an option was given to allow the installer to install to a different drive or path, however in sql 2005, I do not see an option. During the installation it does give you the option of installing via the command line interface, however this would be the last option. If this is the only method of installing sql 2005 for a different data drive path, then please provide the command line to do this. I've used the command line osql/isql to restore db's in sql 2000/msde and it's a pain.

View 3 Replies View Related

Change Default Database Path

May 26, 2006

Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server  it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!

View 2 Replies View Related

Default Installation Path Permission Requirement (Warning)

Apr 18, 2008

I am trying to install SQL Server 2005 Standard Edition in parallel with SQL Server 2000. The server is a Dell 2650 with 1 GB RAM running Windows 2000 Server.

The initial part of the setup runs the System Configuration Checker (SCC), which is generating this warning:


Default Installation Path Permission Requirement (Warning)

The server is a member of a domain, but I am logged in as the local administrator. The drive is not compressed. There are no file system problems. I am at a loss as to why this warning is occuring, and do not want to proceed until I figure this out.

(I got this warning on another server as well. That was a test server, so I proceeded. The engine seems to run ok, but SSIS will not load, says a component is missing. Not sure if the two issues are related or not).

Any ideas?

Thanks,
Mike



View 3 Replies View Related

How To Change Default Path For Database Creation

May 1, 2007

Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??

View 10 Replies View Related

How Do I Change The Default Collation String Of An Installation

Mar 22, 2006

HiWhen we installed SqlServer2000 we left the default collation name(Sql_Latin1_General_CPI_CI_AS).The user defined databases we created afterwards were defined with adifferent collation name in order to be able to accept the character setwe use, Hebrew.We are looking into switching DTSs that we use to copy data from ourmain system , that uses an Ingres database, into OSQL scripts. Althoughthe DTSs successfully copy the Hebrew letters when I copy data with OSQLit comes over as jibberish.After looking into the matter I came to the conclusion that while DTSrefers to specific databases and uses the destination database'scollation name , OSQL refers to the remote server and destination serverand therefore uses the collation name of the server and not of thedatabase. In order for it to successfully copy the Hebrew I need tochange the default collation name of the installation.Is "rebuild master" the way to do such a thing ? (this is a productionserver so we are wary of doing a "rebuild master")Has anyone else run into similar problems when transfering data betweenservers using OSQL ?ThanksDavid Greenberg

View 3 Replies View Related

Default Path For Data And Log When Creating Db

Dec 7, 2000

When a new database is created in enterprise manager the path for the database and transaction logs are defaulted to d:mssql7data or wherever you installed SQL Server to initially. Is there a way to change the defaults to place the data on one drive and the logs on a different drive?

View 1 Replies View Related

Sql 2005 Installation Path Errors

Nov 11, 2007

I have sql 2005 installations errors in some of prod servers. Can i change the default paths without re-installing. Like in my servers backup files should go to E: drive and data files to F: and log files to H: Drive.

Please let me know

Thanks
Kishore

View 5 Replies View Related

Get SQL Server Express Installation Path

Mar 26, 2008

Hi, i would like to know if there's a way to know the path where my sql server is located, i need to know this because i've an application (VB .NET) that needs to know this path, any help?

View 1 Replies View Related

Change Unc Path On Sql

Oct 10, 2006

I have a question on how to change a hyperlink path. I have an ADP that has our scanned files linked to it the path is on SQL server. The problems is that we are migrating sql server and the files to their own seperate server,
\gcfs01databaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf

The server is called \gcfsql Instead of gcfs01.
does anyone know how we can change the unc path to gcfsql without

\gcfsQLdatabaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf

Any help would be greatly appreciated

View 8 Replies View Related

How To Set Initial Alternate Data Path During Installation

Oct 24, 2007

During initial setup of SQL Server 2005 Standard Addition, I was not able to configure an alternate path (non C: ) for the Data component. Can anyone advise on the procedure to set the Data path to non default during initial setup.

Thanks in advance,

Paul

View 7 Replies View Related

When I Change The Path Of Database

Mar 26, 2007

hello

when i change the database path or sub directory then

i can not open it directly. and the computer is restart again.

what i do becasue all time if some error occur the pc is restart?

give me any idea

View 1 Replies View Related

SQL 2012 :: Long Path Names To Files On Installation

Dec 13, 2013

I'm getting a rule check fail "Long path names to files on SQL Server Installation media failed" when installing SQL 2012 Standard edition from a network share.

View 8 Replies View Related

Primary FilesGroup Change Path

Apr 28, 2006



I want modify the path Files of 'Primary' FilesGroup when DataBase is create.

The smo create a default 'primary' FilesGroup when DataBase.Create().

After database is create the path 'primary' FilesGroup' was not change.

Thats possible?

Dim srv as new Server ("SQL instance")

Dim db as new DataBase (srv,"DataBaseTest")

--> how code for modify the FilesGroup 'primary' and the files path?

db.create()



Thanks,

Marsenne

View 1 Replies View Related

Installation Issue - Access To Path Denied On Service Start

Dec 28, 2006

Hi,
I have a generally well working silent installer of SQL Server sp1, that installs a named of SQL Express then runs some create database scripts on it.

I have a customer for whom this fails. It appears that the SQL server service does not start. When I tell the client (non-computer literate!) to start it manually through Admin Tools>Service, a message appears saying "Access to the path denied", and seemingly doesn't specify the path of the denial.

Has anyone encountered this, or is anyone able to hazard a guess as to the cause of this issue.

Many thanks,
Chris

View 4 Replies View Related

Reporting Services :: Default Path For Saving Reports On File System?

Jun 23, 2015

during period of troubles connecting to Local Servers and Sites location i.e., to [URL], the place where all Reports are saved by default, I have continued to work on some Reports that have been saved to file system of my localhost/developing machine. But, upon recovery of http location, I can not see/open those files?

how to approach those files in order to open them in Report Builder 3.0 and thus, to "save as" them to the http location? Seems that Report Builder has chosen that location, by default, somehow.....

View 2 Replies View Related

SQL 2012 :: How To Change File Path From C Drive To E

Oct 22, 2015

How do I change the file path from C: drive to E:

See attached

View 2 Replies View Related

Change Part Of A Path To Lowercase In Script

Jun 27, 2014

I instance where customers want to migrate SQl dB to a new server. I want to change part of the path to lowercase.

The part to be change is always a computer name i.e. ComputernameDatareportA24440 testUser.doc I want to define the computername and the script changes only the computername to lowercase

Using
Update Table
set Path =LOWER(Path) -- etc.
Go

Changes all the path to lowercase,

Note the Computername will always be different depending on the customer. The reason for changing the PCname to lowercase each client can type the PC name in various ways

i.e. Texdom, servicedom, XDB-XDE-46

View 5 Replies View Related

SQL Change Stored Path To Documents Query

Jun 22, 2007

I need someone that knows something about SQL queries.

I have a client that is running a Database known as ProLaw. It is in part a
document management system for Law Offices.

They have an SQL 2005 database that tracks per client all the documents they
create.

We had to replace there server with new server. The new server is running
sbs2003 and had to have a different Netbios name then the old sbs2000
server. (Small Bus. Server has some weird quirks that make simply using the
same netbios name impossible. Google search it if you don't believe me.)

The database holds in a single column the full network share path to each
document.

A document for example may have had a path of

"\lawwillsbs2000ProlawDocumentsACME wigets Incsmith_deposition.doc"

Different documents may have different names and more subdirectories but the
root path of "\lawwillsbs2000ProlawDocuments" is shared by all.

The new server is named \sbs2003 I need to change
the first part of almost 3000 path statements to the new server. The rest
of the path is unchanged.

I have had several people running prolaw tell me that I should run this
query:

UPDATE Events

SET DocDir=REPLACE(DocDir, '\\lawwillsbs2000', '\\sbs2003')

WHERE EventKind='O'

This doesn't work. Nothing is changed. I'm guessing it is because this
query assumes the value will be ONLY \lawwillsbs2000 I see nothing in here that tells the query that this is only part of the string. No wild card or other marker.

I need some kind of string function here do I not? Anyone know enough to
help me craft a proper query?

Thanks

Nathan Williams

View 3 Replies View Related

Server 2008 Instance Path Change

Jul 3, 2015

Currently we have SQL instance on C:  drive.We are now going to upgrade SQL Server 2008 RTM to SQL 2008 SP4.Can we change the path of SQL instance during upgrade?What services need to be stopped during upgrade.

View 2 Replies View Related

SQL 2012 :: SSRS Virtual Directory - HTTP GET Method Appending Default Path

Sep 27, 2015

There was a 2008 SSRS service running on server "abc".

I have a .Net UI that uses the wsdl at [URL] ....

They deployed SSRS 2012 service on a new server "xyz".

DNS points abc to xyz. Nslookup looks right shows both xyz and abc alias to the same IP.

when I try to go to [URL] .... it redirects to xyz as expected for the host name but the HTTP GET /ReportServer is appended with GET /Reports/ReportServer which doesn't exist and I get an 404 error.

I have no admin rights to see anything and I have no idea if it was an inplace upgrade or a new server. I assume it's new since the actual server name changed in nslookup. Why would it append the default virtual directory when it makes the hop to server "xyz"?

View 0 Replies View Related

Single Command To Change The Backup Device Path

Feb 29, 2008



Hi guys.

acutally my network dept. has change the backup file server IP address.. i m now hving problem for taking backup.
i have around 85 backup that runs everyday.. what i m doing now running every single command to drop backup device and then adding again.. but it's taking agess to do..

is there any simple script that just update the device path folder..

Thanks and looking foward.
-MALIK

View 6 Replies View Related

Recovery :: Log Shipping Primary Backup Path Change

Sep 25, 2015

I want to redirect the logshipping primary backup folder to another drive, how to change the configurations steps to move the primary logship folder to another location within the same server!

View 2 Replies View Related

How To Change The Data Path Specified In The SQL Server (MSSQLSERVER) Service Properties?

Apr 18, 2007

I have connected to the SQL Server 2005 instance usign the SQL Server Management Studio; I have changed the default locations for the database and log files. I have also rebooted the machine. When I look in the SQL Server Configuration Manager in the properties for the SQL Server (MSSQLSERVER) I see that the data path is still set to the old value and this field is read-only. How can this can changed without going through the registry?

View 10 Replies View Related

Default Installation

Aug 27, 2007

I have built an application that uses SQLExpress. When I build the setup with a new setup Project I include in the prerequisites SQLExpress so that if the target PC has no SQL server installed the setup sequence will automatically install an instance.

The Serup Sequence installes SQL Server with default Instance name and settings. I need to make the setup package to install the SQL instance with a specific name and some other setting. These settings would be

/qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=pass INSTANCENAME=instname DISABLENETWORKPROTOCOLS=0


if i run it from Command Line.
I searched a lot on my own and didnt find any way of predefining these setting. Tnx in advance

View 1 Replies View Related

Changing From Default Installation

Jun 27, 2007

Hello,



Our security center just scanned my database server and has asked that I change the database server from the default instance name and change the default port used. When installed MS SQL Server 2000 I used the default installation settings. I have installed SP4 and this is all running on a fully patched WIN 2003 Server machine. Is this possible without un-installing and then re-installing?



Thanks for any and all help.



Ben

View 3 Replies View Related

SQL Server 2005 Installation, Default Instance

Nov 7, 2007

I have question about install both default instance and name instance on to one server. Do I need follow a specific order such as default instance first then name instance?

If my server already has two or more name instances, can I install one more default instance?

Thanks

View 1 Replies View Related

Installation To Default Folder For 2000 And 2005

Apr 29, 2008



Sql server 2000 was installed to a default folder C:Program FilesMicrosoft SQL Server

And sql server 2005 was installed to the same location C:Program FilesMicrosoft SQL Server

how do i know which files are related to 2000 and which are related to 2005

please let me know

View 1 Replies View Related

SQL 2005 Non Default Installation Queries Regarding Reboots

Oct 16, 2007

Hi,
I'm just looking into installing a second instance of SQL 2005 with SP2 on a W2K3 R2 machine that already contains a default instance, if i do so is the order of installation
1) Install named instance
2) Apply SP2 to the newly installed named instance

If i do this, will either of these require a system reboot ?
The default instance should remain operational if no reboot required as the service pack is for a specific instance in this case ?


Thanks in advance
P

View 1 Replies View Related

Change Default

Apr 7, 2005

When I was using ALTER TABLE to create a new field, I accidentally type the wrong word as the DEFAULT.

I typed
ALTER TABLE mytable ADD reporting VARCHAR(15) NOT NULL DEFAULT 'Monthl';

I did not want 'Monthl', I wanted 'Month'.

How do I change it, drop it, modify it?

I've been looking through the on-line info from MS and I and very confused.

View 1 Replies View Related

Change Default Collation ?

Oct 23, 2003

SQL Server 2000: Is it possible to change SQL server's default collation without reinstall ?

View 3 Replies View Related

Is There A Way To Change The Default Instance?

May 20, 2004

We installed SQL 7.0 first, then SQL 2000. SQL 7.0 is the default instance.

How can we change the default to SQL 2000?

View 5 Replies View Related

How To Change The Default Values

Nov 13, 2006

The columns fro which we do not enter any values.Fro eg in my table i did not insert any values to Balance col,in my table.
In SQL 2005,management studio,when i said modify table and changed the default to 0 from NULL and also unchecked the checkbox saying Allow Nulls.

I did the above changes and said save.It gave an error saying

'AccountsBalance' table
- Unable to modify table.
Cannot insert the value NULL into column 'Balance', table 'AccountBalanceSheet.dbo.Tmp_AccountsBalance'; column does not allow nulls. INSERT fails.
The statement has been terminated.

Plz help

Poornima

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved