How To Change The Data Path Specified In The SQL Server (MSSQLSERVER) Service Properties?
Apr 18, 2007
I have connected to the SQL Server 2005 instance usign the SQL Server Management Studio; I have changed the default locations for the database and log files. I have also rebooted the machine. When I look in the SQL Server Configuration Manager in the properties for the SQL Server (MSSQLSERVER) I see that the data path is still set to the old value and this field is read-only. How can this can changed without going through the registry?
View 10 Replies
ADVERTISEMENT
Oct 26, 2007
Hi
I am in weired move kindly help me out..I created report using sql server 2005 Reporting services..At one stage it is working fine with proper parameter but due to bad input parameter my report goes in hang mode..so i went to my DB server and restart my reporting service and then MSSQLSERVER I dont remember sequence (may be vice versa) now I am not able to get report when i am passing right parameter..I went to google and only I came to know that due to sequence of restart of services will cause this error..
error like..Application error:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Syste error:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Kindly help me out.
T.I.A
View 5 Replies
View Related
Jul 20, 2005
Hi,I changed the login for MSSQLSERVER service for 6.5 box to "Thisaccount" from "system account" and then again changed back to "systemaccount". Now I cann't connect thru Enterprize Manager to my server.All my services r running and I can connect to my database thru anapplication as before. I cannot re-boot the machine as it is inproduction. Any thoughts?Thanks in advance.Subodh
View 1 Replies
View Related
Mar 23, 2007
This error is being displayed in the eventlog every minute. Any ideas on what it is referring too? I reviewed some posts but most point to specific problems of report server not running, or receiving this error during a run. We are receiving no errors at all. However this is jamming up the event viewer to make troubleshooting other issues very diffucult.
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 3/23/2007
Time: 8:20:16 AM
User: N/A
Computer: SPECTRUM_DB2B
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View 3 Replies
View Related
Apr 27, 2006
Hi
I'm running SQL Server 2005 Express SP1 on a Danish PC, and I need to have the server language set to Danish.
However, when I want to change the language in server properties (the current language is English (US) using Management Studio Express, I can't - all of the properties on the General page are greyed out.
I know that the SQL Server Express SP1 download is available in several languages (Danish not being one of them) - does that mean that I can't get my SQL Server Express SP1 installation to "speak" Danish at all?
Please help - it's driving me up the wall.
View 4 Replies
View Related
May 4, 2015
How to change the Security Properties of a Linked Server.
In tsql, I need to setup a linked server and want to set the Properties -> Security -> For a login not defined in the list above, connections will: -> Not be made But I cannot figure out how to set it to Not be made. I manually set it in the GUI, and the scripted the linked server and when I ran the script to create it was set to Be made using the login's current security context. The create script did not even set it correctly.
I have looked around and all that I have found is a column in sys.linked_logins, uses_self_credential that looks promising. But I cannot change the system catalog.
how i can set the "For a login not defined in the list above" security property in tsql?
View 4 Replies
View Related
Jul 3, 2015
Currently we have SQL instance on C: drive.We are now going to upgrade SQL Server 2008 RTM to SQL 2008 SP4.Can we change the path of SQL instance during upgrade?What services need to be stopped during upgrade.
View 2 Replies
View Related
Dec 5, 2007
every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
View 4 Replies
View Related
Jun 15, 2004
I have a ABC service on a server1 that is dependent on MSSQLSERVER service running on server2. Does anyone know how to setup the service ABC on server1 to have a dependancy on MSSQLSERVER running on server2?
Thanks,
jgs
View 3 Replies
View Related
Mar 12, 2002
When we try to connect the Sql server from our client, the MSSQLServer service stops and when we try to restart the service it goes back to the stop state after few seconds.
Server Configuration in order of installation,
1.WINNT 4.
2.SP4
3.SQL SERVER 6.5
4.Service PAck 5a for Sql Server 6.5
5.SP6a for NT
Workstation setup.
1.Member of the domain inwhich the SQL SERVER 6.5 is present
2.Sql client 6.5
3.SP4(for NT)
4.SP6a(for NT)
No Service packs were installed in the workstation.
When we try to connect the server from the server the MSSQLServer service stops.We even tried reinstalling the entire setup from scratch.
Kindly help us in this regard.
Thanks and Regards,
Gokul G
View 1 Replies
View Related
Apr 26, 2006
I am experiencing an issue with the MSSQLSERVER shutting down automically at 6:00 every 3 days. I do have 2 jobs that run at this time, but they run everyday. We did not install anything additional on the server and we are running SP3a. This just started on April 15, 2006. The Windows Event log displays the following message:
4/21/20066:00:08 PMMSSQLSERVERError(2)17052N/A<server name>The MSSQLSERVER service terminated unexpectedly.
The service stops and does not restart. It required me to restart the service manually.
Any help would be appreciated.
View 4 Replies
View Related
Feb 20, 2007
Hi
For 15 days now my SQL server service is terminating with the following error
MSSQLSERVER service terminated unexpectedly. It has done this 2 Time(s).
This service terminates and restarts automatically and sometimes doesnt restart we have to mannuly start it again.
Event ID: 7034.
Version Details
Version: MSSQL Server 2000
Service Pack: 3a
Build: 8.0.0.760
I have checked many forums most of them suggest to apply the latest service pack. But the same error has been reported by sites having SP4 also.
Kindly help.
Thank you
wasim
View 2 Replies
View Related
Sep 26, 2007
Hi
I am creating Alerts for MSSQLServer service shutdown. Could you please let me know the error of this.
Urgent please.
Thanks
Raj.
View 6 Replies
View Related
Jul 20, 2005
HII have server MSDE 2000 SP3frequently server stopped, and print in log file information:1)17310 :SqlDumpExceptionHandler: Process 1984 generated fatal exception c0000005EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.2)17311 :SQL Server is aborting. Fatal exception c0000005 caught.3)The MSSQLSERVER service terminated unexpectedly.
View 2 Replies
View Related
Jul 27, 2001
I'm not sure i was clear the first time. When the MSSQLServer Service is stopped and started, it stops the SQLServerAgent Service also. But when the MSSQLServer Service is started, it DOES NOT start the SQLServerAgent Service. I don't think this is configurable, so I was wondering if someone had a workaround (.bat file, service dependency, etc.).
TIA,
Mike
View 1 Replies
View Related
Jul 20, 2005
Hello,I hope you guys can help me with a problem that I am facing...I have started the MSSqlServer service and SQLServerAgent serviceswith a domain username and password.There are periodic password resets to this user. Security policieswithin the company dictate that the password for this domain accountcannot be permenant.Would there be any way to automatically reset the pwd in theseservices instead of manually changing them each time?Thanks
View 1 Replies
View Related
Jan 24, 2007
MSSQLServer service terminated unexpectedly
We are running SQL Server 2000 with SP4. This server has been running for the past six months with no SQL server problems. A Max of 10 users have access to the application running on this server.
The Event Viewer Log shows the
Source: MSSQLServer
Category: (2)
Type: Error
EventID: 17052
Description: The MSSQLSERVER service terminated unexpectedly.
No other error messages were seen in the SQL server log or windows event viewer.
The time when it terminated was not during peak load/activity.
The server is Windows 2003 with SP1. Any help would be appreciated.
View 5 Replies
View Related
Mar 18, 2007
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
View 14 Replies
View Related
Oct 14, 2004
I want the change the name of the Data source (see attached gif picture)
Thanks
View 1 Replies
View Related
Aug 12, 2007
All,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
View 2 Replies
View Related
Oct 10, 2006
I have a question on how to change a hyperlink path. I have an ADP that has our scanned files linked to it the path is on SQL server. The problems is that we are migrating sql server and the files to their own seperate server,
\gcfs01databaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf
The server is called \gcfsql Instead of gcfs01.
does anyone know how we can change the unc path to gcfsql without
\gcfsQLdatabaseBackgroundsSCANNED ACROBAT DOCUMENTS (BACKGROUNDS)SCANNED ACTIVE FILES5630.pdf
Any help would be greatly appreciated
View 8 Replies
View Related
Jun 30, 2006
HI,
How can I programmatically change the properties of Send Mail task using Script Task. I want to change the From, To and Attachment parameters of the Send Mail task.
If the Script Task can't do it, Is there any alternative to do?
Thanks
View 1 Replies
View Related
Mar 26, 2007
hello
when i change the database path or sub directory then
i can not open it directly. and the computer is restart again.
what i do becasue all time if some error occur the pc is restart?
give me any idea
View 1 Replies
View Related
May 21, 2015
I installed sql server 2012 on windows2012R2 when I creat a new filegroup and try to change like a default give me this message error:
cannot change the properties of empty filegroup the filegroup must contain at least one file (Microsoft sql server, error:5050)
View 3 Replies
View Related
Mar 16, 2015
I have an ODBC connection string that is working fine with the following properties:
Database="XXXXXXX",Network="YYYYYY"; strangely no server is specified in the string, but it is specified in the ODBC Connection file.
I am trying to do a new server registration in SSMS for this database.However, I don't understand where the network spec is placed.
Under Registered server name I've tried:
YYYYYYXXXXX
When I browse the server for the database instance list, I receive "network path was not found".
I even tried:"XXXXXXX",Network="YYYYYY" for the registered server name.Same error message.
What am I doing wrong ?
View 1 Replies
View Related
May 26, 2006
Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!
View 2 Replies
View Related
Apr 28, 2006
I want modify the path Files of 'Primary' FilesGroup when DataBase is create.
The smo create a default 'primary' FilesGroup when DataBase.Create().
After database is create the path 'primary' FilesGroup' was not change.
Thats possible?
Dim srv as new Server ("SQL instance")
Dim db as new DataBase (srv,"DataBaseTest")
--> how code for modify the FilesGroup 'primary' and the files path?
db.create()
Thanks,
Marsenne
View 1 Replies
View Related
Jan 10, 2007
Have an interesting situation.
I have a NeverFail cluster on which I loaded SQL Server 2005 and SP1.
All was great. Both nodes had no issues with the initial setup or the SP1 update.
When I forced a failover to the inactive node, MOST of the services like SSIS, Full-Text and SQL Browser came up like a champ.
BUT ... the SQL Server service and the SQL Agent did not come up (or shall I say not fully).
I am now looking at the SQL Server Configuration Manager and I see the following for the SQL Server service:
"Name" shows the RED block icon for the SQL Server
"State" shows "Change pending ..."
"Start Mode" is set to Manual
"Log on as" has my domain account listed
"Process ID" has the number 2956 (so it has started somewhat).
I then click open the SQL Service item and it shows that it is stopped.
I am given the option to START the service. When I try to start it, the meter bar comes up and moves slowly to the end and then an error returns of ...
"The request failed or the service did not respond in a timely manner. Consult the event log or other applicable errors logs for details"
If I look under windows Services in the Admin Tools section... I see the services for SSIS, FT and Browser listed and started BUT I see SQL Server says its "starting".
If I click open the service from here, once again it show "starting" and all of the option buttons to Stop-Start-Pause-Resume are grayed out and I am not able to use them.
I have looked in the Windows Event Logs for any events but none are present.
Now I know why the SQL Agent is not running, and of course that is due to is dependency on SQL Server being up and running.
First off WHAT does the "Change pending" message mean?
Then what other logs can I look at for some help or is there someone who has the answers to this dilemma.
Thanks and have a great evening
View 11 Replies
View Related
Oct 22, 2015
How do I change the file path from C: drive to E:
See attached
View 2 Replies
View Related
Jun 27, 2014
I instance where customers want to migrate SQl dB to a new server. I want to change part of the path to lowercase.
The part to be change is always a computer name i.e. ComputernameDatareportA24440 testUser.doc I want to define the computername and the script changes only the computername to lowercase
Using
Update Table
set Path =LOWER(Path) -- etc.
Go
Changes all the path to lowercase,
Note the Computername will always be different depending on the customer. The reason for changing the PCname to lowercase each client can type the PC name in various ways
i.e. Texdom, servicedom, XDB-XDE-46
View 5 Replies
View Related
May 1, 2007
Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??
View 10 Replies
View Related
Jun 22, 2007
I need someone that knows something about SQL queries.
I have a client that is running a Database known as ProLaw. It is in part a
document management system for Law Offices.
They have an SQL 2005 database that tracks per client all the documents they
create.
We had to replace there server with new server. The new server is running
sbs2003 and had to have a different Netbios name then the old sbs2000
server. (Small Bus. Server has some weird quirks that make simply using the
same netbios name impossible. Google search it if you don't believe me.)
The database holds in a single column the full network share path to each
document.
A document for example may have had a path of
"\lawwillsbs2000ProlawDocumentsACME wigets Incsmith_deposition.doc"
Different documents may have different names and more subdirectories but the
root path of "\lawwillsbs2000ProlawDocuments" is shared by all.
The new server is named \sbs2003 I need to change
the first part of almost 3000 path statements to the new server. The rest
of the path is unchanged.
I have had several people running prolaw tell me that I should run this
query:
UPDATE Events
SET DocDir=REPLACE(DocDir, '\\lawwillsbs2000', '\\sbs2003')
WHERE EventKind='O'
This doesn't work. Nothing is changed. I'm guessing it is because this
query assumes the value will be ONLY \lawwillsbs2000 I see nothing in here that tells the query that this is only part of the string. No wild card or other marker.
I need some kind of string function here do I not? Anyone know enough to
help me craft a proper query?
Thanks
Nathan Williams
View 3 Replies
View Related
