How To Choose One Of Two Success-paths?
Jun 28, 2006
I have an ActiveX Script Task in SQL Server 2000. It chooses one of two
possible success-paths depending on if a file exist or not. (Part of the old ActiveX Script for choosing next step is below)
I need to rewrite this for a Script Task in SQL Server 2005 but it seems like it
doesn't have this functionality and objects.
Does anyone know how to write the code for choosing the next step in a
Script Task or knows another way to solve my problem?
The package is not suppose to fail if the file is missing, it's must succeed and that's why I need two success-paths.
Regards,
Sara
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main ()
Dim pkg
Dim stpContinuePkg
Dim stpExit
SET pkg = DTSGlobalVariables.Parent
SET stpContinuePkg = pkg.Steps("DTSStep_DTSActiveScriptTask_4")
SET stpExit = pkg.Steps("DTSStep_DTSActiveScriptTask_21")
If ...... Then
Main = DTSStepScriptResult_ExecuteTask
stpContinuePkg.DisableStep = False
stpExit.DisableStep = True
Else
.......
End If
Main = DTSTaskExecResult_Success
End Function
View 3 Replies
ADVERTISEMENT
Nov 12, 2007
Hi
I have sql 2000/2005 installation path errors in some of prodution servers. Like we have standards that backup files should go to E: drive and data files to f: and log files to h:. Can any one help me in this issue what can be done with out reinstallation,
Thanks in advance
View 7 Replies
View Related
Mar 30, 2006
We have a growing issue where we have a relative dtsconfig file (which stores the absolute base path of the ETL packages). This way we can keep the ETL projects failry portable - only having to modify one value in the dtsconfig file. The master package that defines the dtsconfig location (which is config/Default.dtsconfig) usually interpretates this location to be relative the project. The problem is that every now and again when you open this package in .NETStudio, the path is interpreted differently and causes: config/Default.dtsconfig to state invalid path. But when we delete the variable (which defines the dtsconfig path), save/close and open/recreate it works again. This may or may not be supported MS method, but I was curious to know why this gets messed up. Is there somehwere in the .NET framework that defines what "/" is relatively under?
For example: Our absolute config path is "D:Program FilesMicrosoft SQL Server90DTSPackagesETLProjectETLBaseconfigDefault.dtsconfig" but using: "config/Default.dtsconfig" for xml file value works. However, sometimes we will get an error stating that this file cannot be found, and when we just try to delete (without saving and closing) and immediatelly try to put "config/Default.dtsconfig" again and hit next, we get an error and the path is now:
'D:Program FilesMicrosoft SQL Server90DTSPackagesDEVDataExchangeETLBaseconfigconfigDefault.dtsconfig'.
Ideas?
View 6 Replies
View Related
Jan 7, 2008
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using System.Collections;
public partial class UserDefinedFunctions
{ [Microsoft.SqlServer.Server.SqlFunction(FillRowMethodName="Obj_Row",
IsDeterministic=true,IsPrecise=true,
TableDefinition="ObjID int,OjbDataID int,ObjDataValue nvarchar(400)",DataAccess= DataAccessKind.Read)]public static IEnumerable Obj_IDs(SqlInt32 Data_1, SqlInt32 Data_2, SqlInt32 Data_3)
{using (SqlConnection conn = new SqlConnection("context connection=true"))
{
try
{ if (!Data_2.IsNull)
{string sql = @"Select Obj_ID, Obj_Data_ID, Obj_Data_Value from tbl_Obj_2";
SqlCommand cmd = new SqlCommand(sql, conn);SqlDataAdapter da = new SqlDataAdapter(cmd);DataTable dt = new DataTable();
da.Fill(dt);
conn.Open();return dt.Rows;
}if (!Data_3.IsNull)
{string sql = @"Select Obj_ID, Obj_Data_ID, Obj_Data_Value from tbl_Obj_3";
SqlCommand cmd = new SqlCommand(sql, conn);SqlDataAdapter da = new SqlDataAdapter(cmd);DataTable dt = new DataTable();
da.Fill(dt);
conn.Open();return dt.Rows;
}
}catch (Exception ex)
{
ex.Message.ToString();
}
finally
{
conn.Close();
}
}
}public static void Obj_Row(Object item, out int ObjID, out int ObjDataID, out string ObjDataValue)
{DataRow row = (DataRow)item;
ObjID = Convert.ToInt32(row["Obj_ID"]);ObjDataID = Convert.ToInt32(row["Obj_Data_ID"]);ObjDataValue = row["Obj_Data_Value"].ToString();
}
};
//Error 1 'UserDefinedFunctions.Obj_IDs(System.Data.SqlTypes.SqlInt32, System.Data.SqlTypes.SqlInt32, System.Data.SqlTypes.SqlInt32)': not all code paths return a value
I'm newbie. Please, show me how to correct the problem. Thank you.
View 3 Replies
View Related
May 22, 2007
This has probably been covered in other posts. I have been working with SSIS for the past month and I am trying to follow best practices on various items. Having worked with a different ETL tool prior to this, I am wondering what is the best approach to use for Connections and File Paths.
What I would normally do with DataStage for this would be to assign a Job Variable (and eventually Sequence Variable) of the type: Path. So, if I was developing a job I would create SourceFilePath, ErrorFilePath, etc. I would use these variables in a FlatFile or Dataset Stage. For instance I would assign a filename for a source as: #SourceFilePath#SourceFile1.txt. During execution the job would load the variable and then the filename would be: C:MyDocumentsDatafilesSourceFile1.txt.
When its time to move to another environment, I don't have to worry about changing values for file connections because it is managed dynamically by a config file or whatever method.
What is the best practice that emulates this behaviour for SSIS? I've been thick and can't get my head around this. Any direction to blogs or user sites would be great. Examples, even better!
Thanks in advance.
View 5 Replies
View Related
May 6, 2007
Hi:
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
Ron
View 3 Replies
View Related
May 6, 2007
Hi:
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
Ron
View 1 Replies
View Related
Nov 20, 2005
What are the SQL 2005 Upgrade Paths? For example, is there a direct in-place upgrade for SQL 6.5? SQL 7.0? Can someone provide a link please? Thanks in advance.
View 6 Replies
View Related
Mar 17, 2008
I have created over a hundred reports and each of them are scheduled to output a pdf. The problem is this was temporary and each week I would like to output the reports to a directory that is based upon time. For example, I have 13 groups of reports and each group has 9 reports. Each group has it's own directory and folder. IE group A would be saved in something like \client filesgroup aweekly reportsMar 17 2008. The next week the reports for the same group need to be saved in \client filesgroup aweekly reportsMar 24 2008. This would be the same for each of the groups; group A, group B etc.
The question is there a way to set these paths dynamically or at least iterate through the subscriptions and change the paths?
Cheers
View 6 Replies
View Related
Jan 16, 2004
[[Disclaimer: I am by no means a highly-skilled DBA. I have just enough db skills to get my job done, which involves light sql server and oracle tasks. I appreciate the help, guys.]]
I am trying to replace the path section of filenames listed in a collumn of my database. The filenames are UNC paths, and all files have 8 digit filenames with the same extension (they are all tif images). The length of the paths in the filenames will change, however.
Here is what my old paths look like:
\imageimagesNYY-MMABCDEFGH.TIF
..and here is the new path (all of the images are being consolidated into one directory):
\als-imagealscom31imagesdbABCDEFGH.TIF
-------------------------------------------------------------
I have tried using the following query to do this:
update image set filename=replace(filename,'\imageimages5 0-08','\als-imagealscom31imagesdb')
This returns insanely crazy results like 460239 row affected, when it should be about a thousand.
--------------------------------------------
I have also tried the following:
update image set filename=right(filename,12) + '\als-imagealscom31imagesdb' where left(filename,21) = '\imageimages5 0-08'
This affects zero rows.
Please guide me down the one true path. My coworkers are clueless and I'm quickly running out of disk on the old box.
peace,
-jake
View 14 Replies
View Related
Jul 24, 2007
Ive just installed VS2005 Pro and SQL Server Developer edition.
Now I want to set the default paths for project, templates, settings. But I want for both VS and SQL files.
For example, right now the default folders for SQL Studio are:
.My DocumentsSQL Server Management StudioProjects
.My DocumentsSQL Server Management StudioSettings
.My DocumentsSQL Server Management StudioTemplates
.My DocumentsSQL Server Management StudioBackup Files
... and so on.
For VS Studio:
.My DocumentsVisual Studio 2005Projects
.My DocumentsVisual Studio 2005Templates
.My DocumentsVisual Studio 2005Code Snippets
... and so on.
I would like for all sub-folders(from SQL Server and VS) to be in one same folder(Development), for example:
.My DocumentsDevelopmentProjects
.My DocumentsDevelopmentSettings
.My DocumentsDevelopmentTemplates
.My DocumentsDevelopmentBackup Files
.My DocumentsDevelopmentCode Snippets
... and so on.
I have tried changing in each application´s options the default path for each one, pointing to each folder I listed above.
My problem is that both VS and SQL Server still keeps creating folders in the old locations, for example: ".My DocumentsSQL Server Management StudioProjects". This example happens when I create a new query, and try to save it, it automatically creates that folder.
It only works for a few of them, like the settings folder. Ive managed to create a single folder for SQL and VS setting files.
Is there a way I can join both Application folders? I want to keep both projects files in one folder, both setting files in one folder, and so on...
I hope I explained well my situation.
Thanks!
View 4 Replies
View Related
Apr 10, 2008
Currently I have an sql string which looks like this
INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk 'C://Test.pdf, SINGLE_BLOB) AS BLOB
But the files i am trying to access is on a different shared server called 'test2008' now im told I can access this doing
INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk '
\test2008 estpdf.pdf', SINGLE_BLOB) AS BLOB
Which I made sure had the pdf there I get the following error
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "INSERT INTO tblPDFFiles (fileType,PDFcontent) SELECT 'First test file', BulkColumn FROM OPENROWSET(Bulk '\test2008 est.pdf', SINGLE_BLOB) AS BLOB" failed with the following error: "Cannot bulk load because the file "\test2008 est.pdf" could not be opened. Operating system error code 5(Access is denied.).". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Foreach Loop Container: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
How do I give access to this other server to my SSIS package
View 3 Replies
View Related
Sep 11, 2006
Hi there.I've been searching for this error specifically but I haven't found anything yet.I have these two tables (USERS and REQUESTS):USERS ( [LOGIN] [varchar] (10) NOT NULL , [NAME] [varchar] (20) NOT NULL)where LOGIN is the primary key.The problem comes when I try to create the "REQUESTS" table.In these requests there's one user who types the request. After one or two days, there's other user who aproves the request. The problem is that I need two foreign keys referencing the table "USERS".CREATE TABLE REQUESTS ([ID] [numeric](5, 0) NOT NULL ,[DATE] [datetime] NOT NULL ,[NOTES] [varchar] (100) NOT NULL ,[TYPED_BY] [varchar] (10) NOT NULL ,[APROVED BY] [varchar] (10) NULL) ON [PRIMARY]GOALTER TABLE REQUESTS ADD CONSTRAINT [PK__REQUESTS__07DE5BCC] PRIMARY KEY ( [ID]) ON [PRIMARY] GOALTER TABLE REQUESTS ADD CONSTRAINT [FK__REQUESTS__TYP__15702E88] FOREIGN KEY ([TYPED_BY]) REFERENCES [USERS] ([LOGIN]) ON UPDATE CASCADE ,CONSTRAINT [FK__REQUESTS__APR__12742E08] FOREIGN KEY ([APROVED_BY]) REFERENCES [USERS] ([LOGIN]) ON UPDATE CASCADEAnd SQL returns:Introducing FOREIGN KEY constraint 'FK__REQUESTS__APR__12742E08' on table 'REQUESTS' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.Could not create constraint. See previous errors.Ok, after that, I tried creating a new table to store aprovals (Table with two fields: "REQUEST_ID" and "APROVED_BY").So, I removed "APROVED_BY" field from "REQUESTS" and its FK constraint.The same error comes up.I don't think this structure goes into "cycles" or "multiple cascades".How can I do this?Thanks in advanceRegardsRoland
View 3 Replies
View Related
Aug 4, 2015
I'm curious if there's a "best practice" for setting up the data directories MS SQL will use for each operation? I've allocated independent disks for things like C: (OS), E: (DATA), etc etc etc but I'm not familiar w/ MS SQL to understand how DBA's commonly configure the folders under each unique disk for things like DATA, LOGS, BACKUP, INDEXES, and TEMPDB. Should I have an identically name folder as show below in my example?
You can see I've just mirrored the drive name to a new folder under the partition so data is being written to: F:DATA and E:LOGS. Is this considered correct / good practice? I assume naming the folder in each mount point to whatever I logically called the drive is correct but if I should change how I configure my drive paths above. I'm trying to learn common good SQL Server practices and while I work on properly installing SQL Server 2012/2014, I want to make sure I configure my partition names SQL will utilize correctly.
View 1 Replies
View Related
Oct 29, 2015
What are the potential risks of keeping data , log , tempdb backups etc in the same drive although in different folders ?
View 4 Replies
View Related
Oct 1, 2003
Here a code for finding all minimal loops (cyclic paths) in a graph
with vertexes of degree >= 3. Almost obviously that before seeking
for loops we should eliminate from the graph all its vertexes of degree < 3
(degree of a vertex is the number of edges outcoming from the vertex).
Note: there are no any 'parent' - 'child' nodes here. All vertexes are
absolutely equitable.
if object_id('g3')>0 drop table g3
if object_id('g3x')>0 drop table g3x
if object_id('g3y')>0 drop table g3y
if object_id('g3l')>0 drop table g3l
GO
create table g3y(v1 int, v2 int) -- ancillary table
GO
create table g3x(n int, v1 int, v2 int) -- ancillary table
GO
create table g3l(nl int, v1 int, v2 int)
-- table for storing of 'detected' loops
GO
create table g3(v1 int, v2 int)
-- table of test data with pairs of adjoining vertexes
-- each vertex is named by an arbitrary number
GO
insert into g3
select 2, 3 union all
select 2, 4 union all
select 1, 4 union all
select 3, 5 union all
select 5, 6 union all
select 1, 6 union all
select 4, 7 union all
select 6, 8 union all
select 3, 9 union all
select 1, 7 union all
select 2, 7 union all
select 1, 8 union all
select 5, 8 union all
select 2, 9 union all
select 5, 9 ----union all
/*
select 2, 13 union all
select 3, 13 union all
select 13, 14 union all
select 12, 14 union all
select 12, 15 union all
select 11, 15 union all
select 11, 13 union all
select 10, 11 union all
select 10, 12 union all
select 10, 14 union all
select 10, 15
*/
GO
insert into g3 select v2, v1 from g3
declare @i int, @n int, @v1 int, @v2 int
set @i=1
while 0=0
begin
set @n=1
truncate table g3x truncate table g3y
select top 1 @v1=g3.v1, @v2=g3.v2 from g3 left join g3l on
(g3.v1=g3l.v1 and g3.v2=g3l.v2)or(g3.v1=g3l.v2 and g3.v2=g3l.v1)
where g3l.nl is null if @@rowcount=0 break
insert into g3x select @n, @v1, @v2
while @v1<>(select top 1 v2 from g3x order by n desc)
begin
set @n=@n+1
insert into g3x select top 1 @n, v1, v2 from g3 where v2=@v1
and v1<>@v2 and v1=(select top 1 v2 from g3x order by n desc)
if @@rowcount=0
begin
insert into g3x select top 1 @n, v1, v2 from g3 where
v2 not in (select v1 from g3x union all select v2 from g3x) and
v1=(select top 1 v2 from g3x order by n desc) and not exists
(select 0 from g3y where g3y.v1=g3.v1 and g3y.v2=g3.v2)
if @@rowcount=0
if @n>2
begin
insert into g3y select v1, v2 from g3x where n=@n-1
delete from g3x where n=@n-1
set @n=@n-2
end
else
begin insert into g3l select 0, v1, v2 from g3x break end
end
else
begin
insert into g3l select @i, v1, v2 from g3x set @i=@i+1
end
end
end
select * from g3l order by nl
Below is what we get:
nl v1 v2
----------- ----------- -----------
1 2 3
1 3 5
1 5 6
1 6 8
1 8 1
1 1 4
1 4 2
2 1 6
2 6 8
2 8 1
3 4 7
3 7 1
3 1 4
4 3 9
4 9 2
4 2 3
5 2 7
5 7 4
5 4 2
6 5 8
6 8 6
6 6 5
7 5 9
7 9 3
7 3 5
Of course, in general case not all found by the code loops are minimal.
But this is exactly my approach:
firstly find any possible loops (avoiding excessiveness!!),
then, in WHILE loop, try to mark out minimal loop(s) from intersection of
two non-minimal loops... seems it will be an interesting t-sql job.
View 17 Replies
View Related
Jul 20, 2005
Hello,There are three tables:OS-GroupOFCompanies (Table1)GoC_GroupOFCompaniesID (PK)OS-Organization (Table 2)Org_OrganizationID (PK)OS-UnitAddress (Table 3)Unit_UnitAddress (PK)Scenario:(1)GoC_GroupOfCompanies has -one to many- relationship with Org_OrganizationID.(2)GoC_GroupOfCompanies has -one to many- relationship with Unit_UnitAddress.(3)Org_OrganizationID has -one to many- relationship with Unit_UnitAddress.Following Error message appeared after trying to save the relationship (3) described above.'OS-Unit-UnitAddress' table saved successfully'OS-Organization' table- Unable to create relationship 'FK_OS-Organization_OS-Unit-UnitAddress'.ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]Introducing FOREIGN KEY constraint 'FK_OS-Organization_OS-Unit-UnitAddress' on table 'OS-Organization' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.[Microsoft][ODBC SQL Server Driver][SQL Server]Could not create constraint. See previous errors.NB: ON UPDATE is much needed.How to manage the situation?Please guide.ThanksSuryaPrakash****************************************** This message was posted via http://www.sqlmonster.com** Report spam or abuse by clicking the following URL:* http://www.sqlmonster.com/Uwe/Abuse...f935efcabb55ee9*****************************************
View 3 Replies
View Related
Mar 27, 2014
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies
View Related
Apr 18, 2007
Hello all,
Is there documentation somewhere about multiple execution paths in SSIS control flow? I didn't find documentation anywhere. I have a situation where I have two tasks that take considerable time, but could be executed in parallel (to speed up things) and I was wondering whether SSIS supports parallelism.
To illustrate the issues in simultaneous execution, I created a test SSIS package. In the package, I have five tasks, let's call them T1, T2, T3, T4 and T5. The taks are connected with "green arrows" like this:
T1->T2
T1->T3
T2->T4
T3->T4
T5 is not connected. The tasks can be e.g. Send Mail tasks, that's not relevant to this issue. I put a breakpoint in each task and execute the package.
When I execute package, T1 and T5 become active, i.e. the arrow that displays where the package execution currently is, is in two tasks simultaneously. Now F10 (step over) doesn't seem to work "Unable to step. Not implemented". If I press F5 nothing happens. After I press F5 for a second time tasks T1 and T5 and executed. Why don't they execute with the first pressing of F5? I would additionally like to know whether these two tasks are executed in parallel or sequentially, i.e. in the same thread or in two threads? Is there documentation of this?
The execution stops at T2&T3. Again, pressing F5 doesn't do anything, but the second time I press F5 T2 and T3 are executed.
View 11 Replies
View Related
Nov 19, 2015
I have a  tblActivity table :
ActivityID ActivityName
-----------------------------
1 A1
2 A2
3 A3
4 A4
5 A5
6 A6
7 A7
8 A8
9 A9
10 A10
and related it in tblParentActivity table with parent child relationship as:
ParentActivityID ChildActivityID
-------------------------------------
1 2
1 3
2 4
2 5
3 6
4 7
5 7
6 8
7 9
8 9
9 10
I want to write a SQL query which will make it in tracks depend on how many childActivity in one parentActivity like
ActivityID TrackGroup
-------------------------
1 1
2 1
4 1
7 1
9 1
10 1
[code]....
View 8 Replies
View Related
Apr 11, 2008
Hi,
I have two tables called a and b. a has one row called aId where aId is the PK. b has bId, aId_1 and aId_2 where bId is the PK and aId_1 and aId_2 both allow nulls.
If I have a relationship between aId and aId_1, and another relationship between aId and aId_2, where I set the delete rule for both to SET_NULL, then I get the error -
"may cause cycles or multiple cascade paths"
But its completely reasonable that I might wish to do this.
The funny thing is that under Visual Studio, I can create a Data Set with these tables and using the designer, I can set the both foreign key relationships to Delete Rule Set Null and everything works as expected.
So, I'm unsure now if I just need to set the Delete rules using the Dataset designer and not bother with them in the database itself.
Any comments?
Thanks,
Barry.
View 8 Replies
View Related
Mar 27, 2008
I am trying to send a parameter to an uploaded report, It's default path is:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report
I tried:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report&rs:Command=Render&PONo=15818
It did not run and when I manually added the parameter it changed to:
http://server/Reports/Pages/Report.aspx?ItemPath=%2fNavsion%2fNavision+PO+Report&rs%3aCommand=Render&PONo=15818
I also tried to change the properties parameters settings has default unchecked and prompt unchecked
do I need to place the file in a folder on the server instead of uplading it?
View 1 Replies
View Related
Oct 26, 2015
I have a problem where I need to select all top level file paths from a string value in SQL
So I have a column "Locations"
Example Data:
X:folderanotherfolder
X:folderyet another folder
X:foldernameanother folder
X:foldernameyet another folder
I'd want to return only:
X:folder
X:foldername
I need to somehow parse the sting and capture anything before the second ''?
View 4 Replies
View Related
Jul 15, 2004
oK if anyone remembers the problems with my Update/termination Trigger I found it works best if I do it as a Stored procedure instead of a trigger. Thanks again for your help guys. I really appreciate it
View 3 Replies
View Related
Oct 24, 2007
I have a production server log shipping to a secondary server every 30 minutes (both SQL 2000), which the second server is used for both a warm standby server and for reporting from users. Issue: the log shipping locks the DB so reporting can't be done until the load is finished, the load to the second set of databases has taken up to 15 minutes to finish allowing the users only 15 minutes to run reports, this is not acceptable. The server also needs to be used for DR.
I am looking for another solution, I can't use Transactional Log shipping as not all of the tables in the databases have a primary key identified. So, I am looking for a real-time or near real-time reporting server that is more available to running reports and a warm standby server for Disaster recovery. I am trying to figure out what SQL Server 2000 has to provide (or even 2005 or 2008?) or I am also looking at some third party software, but not sure what is the best for a reasonable price.
Any help is appreciated.
Thanks....JB
View 8 Replies
View Related
Apr 9, 2002
Hi:
I create a DTS package in 'Copy SQL Objects Task' to transfer 3 stored procedures from my local SQL msdb to remote testing msdb database.
Execution is 'successful' but the destination server msdb does not have the 3 stored procedures.
Any hint on this 'vanished' copy objects?
thanks
-D
View 2 Replies
View Related
Feb 13, 2004
Just a thought.
If an issue is resolved please note that the problem has been resolved. Because there are "many ways to skin a cat" it would be helpful to anyone else with a similar problem (or someone trying to learn) what the solution was.
View 7 Replies
View Related
Oct 11, 2006
Hi expert,
I use a SQL Job that makes use of the BACKUP command. How can I check this job success or not?
Thanks
View 5 Replies
View Related
Jun 19, 2007
Hey all
Which system variable do I use if I would like to transfer success message into an SQL table? I'm running a task to import data into an SQL table. And I'm using the System::ErrorDescription variable (Execute SQL task) to insert error messages into a table but I would really appreciate it if someone could tell me what system variable would insert 'success' message into an SQL table. Tried a lot of searching on the net but couldn't find anything.
Many thanks,
Rupa
View 1 Replies
View Related
Oct 19, 2007
Has anyone here been involved in a successful commercial Data Warehouse project?
If so, what was your role? How big was the project? Did you do it all or was their one guy data modelling, one for ETL, one for Client-side, one project managing, etc...? What tools did you use? Was it in SQL2000? 2005? Did you use DTS/SSIS for your ETL or Sprocs? Did you use SSAS? Were you writing lots of MDX to meet client-side needs? Or did you use a completely different toolset for all or some of this?
Did you use the Kimball approach? Or were you in the other camp?
Was your latency nightly or did you have some type of "real-time" capability?
I would prefer to hear from people who've actually been involved in successful projects (or failed projects if you would like to share with us why you think they failed). I'm not too interested in hearing from people that have never done it but have a theory as to how it should work (like me).
Many Thanks,
Coolerbob
(Or is there some other website forum I should be asking this question on? (like mdxteam, olapteam, datawarehouseteam or something)
View 3 Replies
View Related
Feb 16, 2005
Hi All,
I have a dilemn:
On one side, I have a column C1 which could be a primary key because it is never null, the value is unique and identify the record. The problem is its a char type and its lenght can be close to 30.
Then, I've planned to add another column C2 of int type as PK. But then I need to add a unique constraint index on C1. Does it improve performance anyway?
Thanks
View 14 Replies
View Related
Jul 6, 2006
good day, everyone
if i have a transaction table with fields below :
transaction_no, product_id, product_desc, product_qty, product_txn, transaction_date
can some expert here point out to me , which is the best cluster-index and non-clsuter index ?
and possible kindly please explain why is it so? i'm not good in database so just explain like to beginner
thank you very much for guidance
View 3 Replies
View Related
May 6, 2008
(Hard to put a good subject on this one...)
I have a database containing a lot of users and these users can have four different kind of telephone numbers connected to them: "Direct phone", "Switchboard", "Cell phone", "Home phone". The phone numbers are stored in a separate table. Some users have 0 phone numbers, some have 1, some have 3 etc.
Now I have to transfer the data to another database with a strict table structure and here the table that contains the user also should contain the users phone number and an alternative phone number, if the user currently has more than one phone number connected.
This means that if for instance we have three or more phone numbers connected to one user, we can maximum transfer two of them. This is not a big issue though...
We have ranked the importance of the phone numbers in the order as I presented them above.
What I do in my T-SQL query is to do a ISNULL() and see if the user has "Direct phone" connected, if not I check for the next type and so on.
Now to my problem! Can anyone give me a suggestion of how to write the code for the extraction of the Alternative phone? What I need to do is to check if there is a "Direct phone" connected to the user, if so I should NOT chose that but the next phone number that I find.
View 7 Replies
View Related
