In SQL Server 2005 (Developer Edition) I can't figure out how to close the extra sub-tabs (by default within and below the current query tab) that show the query results and messages.
I know in SQL Server 2000 there was an icon button in the toolbar that let you do this. Surely there is some similar way to close that in 2005?
Does anyone know how?
=====================================
f u cn rd ths, u cn gt a gd jb n prgrmng
Hi All,
I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
Thanks
dotnetdev1
I am rewriting several stored procedures that originally had lots of "multiplicated" code. I am aware that references to objects within dynamic SQL do not create dependencies, so I intend to add code that will generate the dependencies but will NOT produce any output in both the Results and Messages tabs, not be overly "messy" or complicated, and have the least impact on execution plan creation as possible.
As we use a dependency list of tables used to our support staff pinpoint possible data issues associated with each of these stored procedures.
I have tried a few methods already, including this:
SET @SQL = N'SELECT Column1,Column2 FROM dbo.TableName';
...
/***************************************************************************************/
/* This code block is only to establish dependency of objects used within dynamic SQL. */
/* */
/* SET statements are used so that no output is produced in Results or Messages tabs. */
/* Object existence check avoids error 208, "Invalid object name" message. */
/***************************************************************************************/
DECLARE @DependentObject SQL_VARIANT;
IF OBJECT_ID(N'dbo.TableName', N'U') IS NOT NULL
SET @DependentObject = ( SELECT TOP (1) Column1,Column2 FROM dbo.TableName);
/* End code for dependency of objects used within dynamic SQL */
Hi,
My question is if I close the sqlreader i am using. will that close the connection it uses or the connection will still remain open?
Syed
Hi,
I got a problem.
I installed Microsoft SQL Server Management Studio Express 2005 version.
And I created a Compact database.
I created an connection in SSMSE to connect the database and opened a query form.
then, i run the following sql:
Select * from Table1
It returned 3 records to me.
After that, I used program to insert record into this table.
Then i ran this sql again, it still show me 3 records.
I closed the query form, and re-created a new query form, then run the sql, it returned 4 records to me.
Why? It's very strange and difficult to operate, right?
Is there anyone know how to make the SSMSE to return whole records without any close query form and re-create query form operation?
Thanks a lot!
And Merry X'max!!!
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies View RelatedHello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
Hi,
How to log queryresult messages (not result) into file using sql query?
I am looking for storing results into file like (2 Rows affected) and also error messages thrown by system.Any idea?
Regards
Arun.M
I am writing a stored procedure which finally has to send mail to the customer with a list of phones that have been added to his account. I am getting these phones from a SQL Table in the form of a query, and including the output of the query(list of phones) , in the body of the mail.
There are two issues that I am unable to resolve,
1. I just want the output with no messages.
eg. 8887775567
not
8887777767 ( 1 row(s) effected)
2. One phone number per row.
8887775567
8009978776
6679800077
NOT
8887775567 8009978776 6679800077
Thanks in advance.
Hi,
Is there a way not to show the output messages from a query(eg. (1 row(s) affected)) when you send the query output to text? Thanks.
The ExecuteSQL task makes it easy to capture the resultset of a query or stored proc in a variable. But what about the messages that would normally appear in the Messages tab when running queries in Management Studio or Query Analyzer? There must be a way to display and log rowcounts and other messages that a query normally produces.
Various package/task logging configrations haven't helped. I've read discussions about logging rowcounts in data flow tasks, but what about capturing messages in ExecuteSQL and other control flow tasks that run T-SQL?
I only have enough time to dabble in this technology so I may be missing something obvious or approaching this incorrectly. Any suggestion, reference, constructive criticism or reponse would be appreciated.
Two days ago I discovered that the drive on our test SqlServer2005 was full. The current Error_log had 54+ Gb (yes Gb) of records. Not only did I delete the file I restarted SS and the server.
That afternoon, I discovered that the current log had 33,678 records! I believe 33,616 of the records came from a single run of my app and set of program events. Obviously I'm doing something wrong in my Query Notification implementation and testing. And yet, when I try to to deliberately trigger the phenomenon, I can not.
Here is the head of the exported log file; the two msgs (query dialog closed and cannot drop queue) alternate thousands and thousands of times form a single test run. What is going on?! Pls help!
Date,Source,Severity,Message
10/11/2007 11:42:52,spid5s,Unknown,SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
10/11/2007 11:42:52,spid5s,Unknown,SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. No user action is required.
10/11/2007 11:42:49,spid14s,Unknown,Service Broker manager has shut down.
10/11/2007 11:42:47,spid51,Unknown,Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
10/11/2007 11:42:47,spid51,Unknown,Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
10/11/2007 11:42:47,spid51,Unknown,Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
10/11/2007 11:42:04,spid51,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid54s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid54s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid52s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid52s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid52s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid52s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid54s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid54s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid52s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid52s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid54s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
10/11/2007 11:42:03,spid54s,Unknown,The query notification dialog on conversation handle '{72FF98A6-1478-DC11-B117-003048772A14}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
10/11/2007 11:42:03,spid52s,Unknown,The activated proc [ovs].[SqlQueryNotificationStoredProcedure-ed59bba2-19b1-42a3-9aaa-f8a76b844561] running on queue OVS_GOM_Protected.ovs.SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561 output the following: 'Cannot drop the queue 'SqlQueryNotificationService-ed59bba2-19b1-42a3-9aaa-f8a76b844561'<c/> because it does not exist or you do not have permission.'
I would like to view the previous executed query error message in SSMS. Is there any way to view the query execution error messages history in SSMS?
View 2 Replies View Relatedok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
Hello, please help!!
I have spent days searching the web and forums for an answer to this simple question and cannot find an example.
I have built a service broker application on sql server 2005. The application puts some xml on an incoming queue which is basically a few parameters to be used in a query. This queue will then call a stored proc which does some business logic and puts the resulting results in another queue also in xml.
I have written a test harness in SQL to put messages on the inbound queue and then some sql to retrieve the returned code from the outbound queue.
What I want to do is be able to convert the SQL which does this into .net code to be used by an application. i.e. write in .net some code to put xml on a queue and then write some .net code to retrieve xml from another queue.
I wouldn't have thought this would be a difficult thing to do and would have been done hundreds of times, but unable to find anything to simply send and retrieve XML to service broker queues....
thanks for your help.. its really needed. I found some links, but they are really vague and often doing select statments in service broker or something like this. I don't want to call any sql, just send and recieve XML on the queues.
any example code that does this, would be really helpfull
kind regards,
David Weeden
Database Developer
linking two tables together to get an end result
find below the code i have used
The first part of the query provides me with the info i need
SELECT sub.*,
case when rm_sales_band = '2M to 4M' then 'Kirsty' else RM end as rm
into #rmtmp
[Code].....
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
Hi,New to .Net and SQL. I have two tables that I have joined together. RentalControl_Main has the rental informationd and an Adjuster ID that links to the ADjuster table and the adjusters name. I am trying to create a report that gives the "Single" adjuster name and the totals for all of their contracts. I have a details report that gives each contract info. for each specific adjusters rentals. However, I want to just list the adjuster once and give all of their totals. In my SQL statement I have all of it written out and just need to knowwhat to do in place of 'Alex Early' that will give me all of the distinct adjusters.Do I need to code this on the page with a do while loop?Appreciate any help.SELECT SUM(dbo.RentalControl_Main.Rate) / COUNT(dbo.RentalControl_Main.Rate) AS AmtAvg, SUM(dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.DaysBilled) AS DayAvg, SUM(dbo.RentalControl_Main.Rate * dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.Rate) AS TotAvgFROM dbo.RentalControl_Main INNER JOIN dbo.RentalControl_Adjuster ON dbo.RentalControl_Main.AdjusterID = dbo.RentalControl_Adjuster.AdjusterIDWHERE (dbo.RentalControl_Adjuster.AdjusterName = 'Alex Early' AND (dbo.RentalControl_Main.DateClose IS NOT NULL) AND (dbo.RentalControl_Main.AgencyID = '2')
View 1 Replies View RelatedI was wondering if there was a keyword that would allow you to return the number of results from a query such as (this is fake just giving an example so that someone can give me the real answer)
select TotalReturned
from table
where field=""
I am a beginner with SQL, so please excuse any ignorance here.
Under SQL 6.5, when executing a SELECT DISTINCT query against a table in a certain database, the results were returned alphabetized. Now, after migrating the database to SQL 7.0, the same query does not return the results alphabetized. If I add an index for the column specified in the query to the table, the results come back alphabetized. Is there any way to correct this other than adding indexes for all columns in all tables that are queried in this manner?
TIA,
Paige
I am running the same exact query in SQL 2000 and I get different results. Should I try running DBCC CHECKDB and look for errors?
View 5 Replies View Related
Hi,
I have this line of code that when run in the query doesn't return anything:
srv.AGENT_S_ACC_CODE IN ('" & Replace(Replace(Parameters!arcode.Value," ",""),",","','") & "')
The parameter is setup and the query works when I hardcode it with a value but will not return anything with this, does anyone know why?
Thanks,
Rhonda
Hi guys, say i wrote a query that returns 1,000 records.. what kinda query could i write that only returns say the first 50 records of the 1,000 recs..
View 4 Replies View RelatedHello,
I want to select all the customerIDs where an email address exists. Easy: select customerid from customers where emailaddress = @emailaddress
Now I want to use the resulted customerIDs from the above query as a parameter to select all the email addresses with emailstatus equal to 3.
How do I create this type of while statement in a stored procedure? I prefer to not create a temporary table.
My idea was to do it like this:
select emailaddress from emailaddresseswhere emailstatus = 3 and customerid = (select customerid from customers where emailaddress = @emailaddress)
This doesn't seems to work. I get the error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
thanks
I have a pretty big SQL query with a one to many sort of relationship...
There are client accounts that we're reporting on. Each account has four different historical categories attached. Each historical category can have maybe fifty entries in each, sorted by date.
I need to figure out how to grab the unique accounts and show only the three most recent results per each historical subcategory with the account... the three most current results from each of the four subcategories, displayed by the parent client account number.
I've created four views to isolate the subcategories as a start, thinking I could bring them into a parent query ...
but my question would be... how do I generate JUST the top three historical transactions by account number? If I select TOP 3, I get only the 3 newest in the MASTER LIST, not per client account, which is what I need to do.
Does this make sense? I could really use a good SQL helping hand with this one.
Thank you!
Can anyone give me the basics of speeding up reports that use queries or views or nested views?
Current reports are now taking over 2 minutes to show.We have thousands and sometimes even millions of records to report against.Queries have 4 and 5 table joins etc.
We are using ASP.NET 2.0 in Visual Studio 2005 and Crystal Reports.
Thanks
Hi,
I would like to use the result table of the first query in a number of other queries. How do I do this ?
Thanks.
I have a database with some over normalized tables in it. The best I can do with one query is get the file ID. In the second query I want to get all the file names, based on all the fileID's I got from the first query. How would I go about doing this?
View 5 Replies View RelatedI have been searching this topic on and for quite some time and can't seem to find a decent answer. Is it feasible to do your paging strictly from a SQL query? Pass the query the pagesize, what page to return and what to sort by?
View 4 Replies View Relatedok the following statement returns the correct results in sql query analyzer but in the .net environment with c# it returns back less 3 records
SELECT SUM(ao.amount),bl.dpc,bl.city from billinglocation bl inner join shippinglocation sl on bl.billinglocationid = sl.billinglocationid inner join absorbentorder ao on sl.shippinglocationid = ao.shippinglocationid group by bl.dpc, bl.city
billinglocation 1 - 1 shippinglocation 1 - many absorbentorder
anybody have any ideas why this might be occuringthanks!