How To Compare Dynamic Variable In Proc
Sep 28, 2007
I have a table with 52 columns named 'Week1', 'Week2' etc. with values 1, 0 etc. I want to check values in each column. I have following lines in my procedure.
Declare @l_str varchar(50),
@l_count int
Select @l_count = 1
Select @l_str = 'Week' + Convert(varchar, @l_count)
Now how do I compare the value stored in the @l_str which should be wither 0 or 1 and not 'Week1'?
Is there any better method to compare read these 52 table variables?
Thanks in advance
View 3 Replies
ADVERTISEMENT
Oct 15, 2007
I am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
View 1 Replies
View Related
Mar 24, 2007
I have a Stored Procedure for processing a Bill of Material.
One column on the Assembly Table is a Function Name that contains some busniess rules.
OK, now I'm doing a Proof of Concept and I'm stumped.
Huuuuh!
I will ultimately have about 100 of these things. My plan was using Dynamic SQL to go execute the function.
Note: The function just returns a bit.
So; here's what I had in mind ...
if isnull(@FnNameYN,'') <> ''
exec spinb_CheckYN @FnNameYN, @InvLineID, @FnBit = @FnBit output
CREATE PROCEDURE dbo.spinb_CheckYN
@FnNameYN varchar(50),
@InvLineID int,
@FnBit bit output
AS
declare @SQL varchar(8000)
set @SQL = '
if dbo.' + @FnNameYN + ' (' + convert(varchar(31),@InvLineID) + ')) = 1
set @FnBit = 1
else
set @FnBit = 0'
exec (@SQL)
GO
Obviously; @FnBit is not defined in @SQL so that execution will not work.
Server: Msg 137, Level 15, State 1, Line 4
Must declare the variable '@FnBit'.
Server: Msg 137, Level 15, State 1, Line 5
Must declare the variable '@FnBit'.
So; is there a way to get a value out of a Dynamic SQL piece of code and get that value INTO my OUTPUT variable?
My many thanks to anyone who can solve this riddle for me.
Thank You!
Sigh: For now, it looks like I'll have a huge string of "IF" statements for each business rule function, as follows:
Hopefully a better solution comes to light.
------ Vertical Build1 - Std Vanes -----------
if @FnNameYN = 'fnb_YN_B1_14'
BEGIN
if dbo.fnb_YN_B1_14 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
------ Vertical Build1 - Scissor Vanes -----------
if @FnNameYN = 'fnb_YN_B1_15'
BEGIN
if dbo.fnb_YN_B1_15 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
.
.
.
etc.
View 10 Replies
View Related
Jun 9, 2000
Hi,
I'm using SQL
View 1 Replies
View Related
Jun 9, 2000
Hi,
I'm using SQL Server 7.0. I have a Production database and a Development database. I have stored procedures with the same name in both databases. Is there a utility that I can use to see if the version that is in the production database is the same as the one in development and, if not, what are the differences between the two?
Thanks in advance,
Darrin
View 1 Replies
View Related
Jun 10, 2008
Hi guys. I'm trying to compare the results from various stored procedures. Various stored procedures in our database got redone (refactored), and I want to see if they still pull back the same data.
Are there any programs out there that do this? Compare result sets from stored procedures? Any help is appreciated. Thanks!
View 1 Replies
View Related
Dec 8, 2007
I have created a function with:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER FUNCTION [dbo].[fn_concat_boxes](@item varchar, @week int)
RETURNS VARCHAR(100)
AS
BEGIN
DECLARE @Output varchar(100)
SELECT @Output = COALESCE(@Output + '/', '') +
CAST(quantity AS varchar(5))
FROM flexing_stock_transactions
WHERE item = @item AND week = @week
GROUP BY quantity
ORDER BY quantity
RETURN @Output
END
how can I pass the variable @item correctly for the string comparison
WHERE item = @item AND week = @week
to work correctly please?
WHERE item = '@item' AND week = @week
won't work and
WHERE item = @item AND week = @week
won't work.
View 2 Replies
View Related
Nov 22, 2004
Please help, I am trying to write a dynamic search stored procedure using three fields.
I use the same logic on the front end using VB to SQL server which works fine, but never tried a stored procedure with the logic.
Can you please help me, construct a stored procedure.
User can choose any of the three(progno, projno, contractno) fields as a where condition.
I ma using asp.net as front end with sql server backend.
CREATE PROCEDURE dbo.USP_Searchrecords
(@ProgNO nvarchar(50),
@ProjNOnvarchar(50) ,
@ContractNOnvarchar(50))
AS
DECLARE @myselect nvarchar(2000)
DECLARE @psql nvarchar(2000)
DECLARE @strsql nvarchar(2000)
SET NOCOUNT ON
@psql = "SELECT * FROM Mytable"
IF @ProgNO <> '' then
strsql = WHERE ProgNO = @ProgNO
end if
If @ProjNO <> '' then
if strsql <> '' then
strsql = strsql & " and ProjNO =@ProjNO
ELSE
strsql = wHERE ProjNO =@ProjNO
END IF
END IF
If @ContractNO <> '' then
if strsql <> '' then
strsql = strsql & " and ContractNO =@ContractNO
ELSE
strsql = wHERE ContractNO =@ContractNO
END IF
END IF
@myselect = @psql + @strsql
EXEC(@myselect)
Please help. Thank you very much.
View 3 Replies
View Related
Oct 12, 2004
How can I make this stored procedure concept work:
-----------------------------------------------
Create Procedure MyProc @MyValue varchar(5)
As
Declare @ColumnName as varchar(11)
Set @ColumnName = 'Price_' + @MyValue
Select Sum(Price) As @ColumnName --????
From MyTable where Item = @MyValue
Return
-----------------------------------------------
Using @MyValue = 23 should make the Sum(Price) column name 'Price_23'. It's not working. What am I doing wrong?
Bjorn
View 2 Replies
View Related
Jul 20, 2005
I am trying to run 3 dynamic selects from stored proc, really onlythe table name is dynamic.. Anway I'm kinda lost on how I canaccomplish this.. this is what I have but it only returns the firstresult.. that being basicCREATE PROCEDURE email_complexity@TableName VarChar(100)ASDeclare @SQL VarChar(1000)Declare @SQL1 VarChar(1000)Set nocount onSELECT @SQL = 'SELECT Count(complexity) AS basic FROM 'SELECT @SQL = @SQL + @TableNameSELECT @SQL = @SQL + ' WHERE len(complexity) = 5'Exec ( @SQL)SELECT @SQL1 = 'SELECT Count(complexity) AS moderate FROM 'SELECT @SQL1 = @SQL1 + @TableNameSELECT @SQL1 = @SQL1 + ' WHERE len(complexity) = 8'Exec ( @SQL1)ReturnIs there a better way of doing this??tiaDave
View 2 Replies
View Related
May 7, 2008
Hi,
I'm looking for some sample code rather than having to re-invent the wheel.
I need to write an analysis services stored proc that will invoke a SQL stored prod in my DW dataabse to retrieve a list of client_id's. I then need to construct and return a set object. This AS stored proc will be referenced from a role.
I've read few things about using the Set object rather than StrToSet function but then the only way I see to create a Member orSet object from a literal is to build an Expresion object and call the CalculateMdxObject(null).ToSet() function. Is this not equivalent to MDX.StrToSet()?
Also, ideally I'd like to connect to my SQL db by accessing the connection string from the Data Source objects in my AS DB. So far I have not found a way to do this.
Some guidance and sample code would be much appreciated.
Thanks.
View 8 Replies
View Related
Apr 21, 2015
My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv
Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:
If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date
If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.
View 3 Replies
View Related
Oct 14, 2004
Hi all,
I'm gonna need some help with this one.
I have this stored procedure written up that basically builds a dataset by querying a bunch of tables using outer joins. Our problem now is that it seems it takes a while for the dataset to pull back across the network. We would hence like to filter that dataset by adding on to the query in the procedure dynamically. Heres the query from the proc below:
SELECTN_Client.Prefix,
IsNull(dbo.N_CLIENT.SURNAME, '') + ', ' + IsNull(dbo.N_CLIENT.FIRST_NAME, '') AS Client_FullName,
dbo.N_CLIENT.TITLE,
dbo.N_COMPANY.COMPANY_NAME,
dbo.N_BUSINESS_UNIT.BUSINESS_UNIT_NAME,
dbo.N_DIVISION.DIVISION_NAME,
dbo.N_REF_INDUSTRY.INDUSTRY_NAME,
dbo.N_CLIENT.DIRECT_PHONE,
dbo.N_CLIENT.EMAIL,
dbo.N_CLIENT.TIER_ID,
(SELECT COUNT(Client_ID)
FROM N_Alumni
WHERE N_Alumni.Client_ID = N_Client.Client_ID) AS Alumni,
(SELECT COUNT(Client_ID)
FROM N_XREF_Client_Activity
WHERE N_XREF_Client_Activity.Client_ID = N_Client.Client_ID AND Activity_ID = 1) AS SandB,
(SELECT BAH_EMP_NID
FROM N_XREF_Client_Activity
WHERE N_XREF_Client_Activity.Client_ID = N_Client.Client_ID AND Activity_ID = 1) AS SandBMailer,
(SELECT N_Vw_Client_BAH_Contact.BAH_EMP_NID
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'MM' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS MMEMPNID,
dbo.N_CLIENT.SURNAME AS Client_Surname,
dbo.N_CLIENT.FIRST_NAME,
dbo.N_CLIENT.FIRST_NAME AS Client_FirstName,
dbo.N_CLIENT.COMPANY_ID,
dbo.N_CLIENT.DIVISION_ID,
dbo.N_CLIENT.BUSINESS_UNIT_ID,
dbo.N_COMPANY.GROUP_ID,
dbo.N_CLIENT.COUNTRY,
dbo.N_GROUP.GROUP_NAME,
dbo.N_CLIENT.CLIENT_ID,
(SELECT IsNull(N_Vw_Client_BAH_Contact.First_Name, '') + ' ' + IsNull(N_Vw_Client_BAH_Contact.Surname, '')
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'PC' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS PCFullName,
(SELECT N_Vw_Client_BAH_Contact.BAH_EMP_NID
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'PC' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS PCEMPNID,
(SELECT NMT_Practice_Code
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'PC' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS NMT_Practice_Code,
(SELECT NMT_Practice_Name
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'PC' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS NMT_Practice_Name,
#returnTable.AddlFullName,
#returnTable.AddlEMPNID,
#returnTable.FunctionID as Function_ID,
#returnTable.FunctionName as Function_Name,
(SELECT IsNull(N_Vw_Client_BAH_Contact.First_Name, '') + ' ' + IsNull(N_Vw_Client_BAH_Contact.Surname, '')
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'CSO' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS CSOFullName,
(SELECT N_Vw_Client_BAH_Contact.BAH_EMP_NID
FROM N_Vw_Client_BAH_Contact
WHERE Relationship_Type_Code = 'CSO' AND N_Vw_client_BAH_Contact.Client_ID = N_Client.Client_ID) AS CSOEMPNID,
ISNULL(dbo.N_CLIENT.ARCHIVE_FLAG, 'N') AS Archive_Flag,
dbo.N_COMPANY.TARGET_COMPANY_FLAG,
dbo.N_COMPANY.INDUSTRY_ID,
N_Client.Address1,
N_Client.Address2,
N_Client.Address3,
N_Client.Address4,
N_Client.Address5,
N_Client.City,
N_Client.State,
N_Client.Postal_Code,
N_Client.Country,
N_Client.Region,
N_Client.Office_Code,
N_Client.Broderick_Target_Flag
FROMdbo.N_CLIENT
INNER JOIN
dbo.N_COMPANY ON dbo.N_CLIENT.COMPANY_ID = dbo.N_COMPANY.COMPANY_ID
LEFT OUTER JOIN
dbo.N_GROUP ON dbo.N_COMPANY.GROUP_ID = dbo.N_GROUP.GROUP_ID
LEFT OUTER JOIN
dbo.N_REF_INDUSTRY ON dbo.N_COMPANY.INDUSTRY_ID = dbo.N_REF_INDUSTRY.INDUSTRY_ID
LEFT OUTER JOIN
dbo.N_DIVISION ON dbo.N_DIVISION.DIVISION_ID = dbo.N_CLIENT.DIVISION_ID
LEFT OUTER JOIN
#returnTable ON #returnTable.CLIENT_ID = dbo.N_CLIENT.CLIENT_ID
LEFT OUTER JOIN
dbo.N_BUSINESS_UNIT ON dbo.N_CLIENT.BUSINESS_UNIT_ID = dbo.N_BUSINESS_UNIT.BUSINESS_UNIT_ID
ORDER BY N_Client.client_id
Where upper(title) like '%parameter_value%'
and company_id = 'parameter_value'
and Nmt_practice_code = 'parameter_value' ...............and so on
What we would like to do is to add 15 (where some may be null) input parameters to the definition of the query and then somehow (where the parameter is not null), dynamically add that parameter to the WHERE clause of the query illustrated in italics above. The bold print are examples of 3 of the 15 parameters to be passed into the query by the proc, so basically
title, company_id,Nmt_practice_code would be the 3 parameters being passed into this proc.
So in other words if 9 parameters out of the 15 are passed into the proc, we would like those 9 parameters to be added/built dynamically onto the SQL Query as 9 predicates. I hope I have been clear. Does anyone have any experience with this??? Help!!
Thanks
View 2 Replies
View Related
Aug 5, 2004
I need to create a SQL Server Stored Proc that will handle a variable number of Or conditions. This is currently being done with a MS Access Query as follows
Do Until rst.EOF
myw = myw = "(rst!Field1 <> 0) OR (rst!Field1 <> 1) "
Loop
mysql = "UPDATE Table SET Field2 = 1 WHERE " & myw
The above code is very simplified.
I Want to create a stored proc to do this but I cannot send it the SQL to the Stored Proc (or can I) so I need to use parameters instead. I want to do something like
Do until rst.EOF
Set cmd = MakeStoredProc("sp_Table_UpdateField2_ForField1")
Set prmField1 = cmd.CreateParameter("Field1", adInteger, adParamInput, , rst!Field2)
cmd.Parameters.Append Field1
cmd.Execute
Loop
Again the above is very simplified. So how can you get the the SQL for the Stored Proc for something like the following from a loop
WHERE = (Field1 <> 0) OR (Field1 <> 1) OR (Field1 <> 2) ...
Thanks in advance for your help
View 1 Replies
View Related
Sep 25, 2006
Hey,
I create a Select Statement in stored proc and I have printed the variable and it has the correct Select statement. My problem is now that I have the string I want how do I run it.
Thanks
View 2 Replies
View Related
Sep 13, 2006
two variables declared in my proc:@DATE_RANGE_START as datetime,@DATE_RANGE_END as datetime,When I execute my SP it takes 34 seconds.When I change the variables to:@DATE_RANGE_START1 as datetime,@DATE_RANGE_END1 as datetime,and add this to my sp:declare @DATE_RANGE_START datetimedeclare @DATE_RANGE_END datetimeset @DATE_RANGE_START = @DATE_RANGE_START1set @DATE_RANGE_END = @DATE_RANGE_END1the SP runs in 9 seconds (which is expected)Passing in '1/1/01' and '1/1/07' respectivly.Everything else is equal and non-important to this problem.Why does it take 34 seconds when I use the variables from the inputparameters?Interesting isn't it.Jeff
View 5 Replies
View Related
Oct 31, 2007
Hi all,
I haven't been able to get a variable to get its value from a query using other variables as paramters. Is this possible?
Here's my situation:
I have a table workflow
(
id int PK,
Quarter int UK1,
Responsible varchar UK1,
Stage varchar UK1
)
The workflowId is a composite key of the other three columns to keep the facttable rows narrow.
And a stored proc GetWorkflowId that looks if a certain combination of quarter, responsible and Stage exists. If so, it returns the id, if not, it inserts the row and returns the Id. So i can;t use a lookup or merge join, becuase the workflow row may not exist yet.
Now i need this workflowId as a variable in my package. (First a sql task uses it to delete old values, then a dataflow task would use it as a derived column to insert the new values.
Quarter is a variable in my package, and i need to lookup/ create a workflowid with the stored proc using Quarter, and then get the return value into a variable WorkflowId. Can i do that?
Hope i've been clear, if not let me know.
Thanks in advance,
Gert-Jan
View 4 Replies
View Related
May 22, 2008
Does abyone know how to compare data-type xml in a temp/variable/physical table in MSSQL 2000?
I tried this works in MSSQL 2005,
Code Snippet
create Table #t1 ([c1] int identity(1,1) not null, [c2] text)
create Table #t2 ([c1] int identity(1,1) not null, [c2] text)
Insert into #t1
Values('This is a test')
Insert into #t2
Values('This is a test')
Select * from #t1
Select * from #t2
Select * from #t1 where [c2] LIKE (Select [c2] from #t2)
drop table #t1
drop table #t2
but not MSSQL 2000.
Server: Msg 279, Level 16, State 3, Line 12
The text, ntext, and image data types are invalid in this subquery or aggregate expression.
Is this true (from BOL)?
Code SnippetIn comparing these column values, if any of the columns to be compared are of type text, ntext, or image, FOR XML assumes that values are different (although they may be the same because Microsoft® SQL Server„¢ 2000 does not support comparing large objects); and elements are added to the result for each row selected.
View 1 Replies
View Related
Feb 16, 2005
Need to parsing serverName and databaseName to run a dynamic query to get serverName and databaseName and employee_ID via a accountID parameter.
-----------------------------
declare @stringSQL varchar(200)
select @stringSQL=
'insert into temp1 select '+@AccountID+' accountID, employee_ID from ' + @serverName +'.dbo.'+@databaseName+'.tblEmployee where inactive=0'
print @stringSQL_GetUserName
exec (@stringSQL_GetUserName)
select * from temp1
------------------------------
above dynamic query works fine.
Howevery, this should be run only under insertion event. When I put it in a proc to run within the insertion trigger or put the whole sql statement within the trigger:
1. when ran at a MSDE server
MSDTC on server is unavailable.
2. when ran at a SQL2000 developer testing server with the distributed transaction coordinator on, the insertion a record in the isql/w hang there. Could not even to kill this query, and have to stop and restart the SQL server.
Then I just want to return the dynamic query result without 'insert into temp1 ', the result is still hang...
Is there a way to let the insert trigger to run a dyanamic query which linked to around 10 servers?
thanks
David
View 4 Replies
View Related
Sep 17, 2007
I am writing a SQL 2000 stored procedure which uses an €˜EXEC @sqlString€™ statement. The @sqlString is generated at runtime. I want to give as few permissions as possible and currently allow users to access the database tables using only the stored procedures provided. However, with €˜Exec€™ I discover that I need to grant permissions on the actual tables to the users or groups. I would like to avoid this. I would also prefer not having to maintain a separate user with table level permissions and hardcoding the stored procedure with these details.
Is there anyway for me to dynamically generate the required SQL statement within my stored procedure and let SQL know that this stored procedure is allowed to select whatever tables it wants to without having to define permissions on the tables?
View 1 Replies
View Related
Feb 5, 2008
Hi
I wanted to use the table variable in Stored proc , for that i have create the table variable in the main SP which will be used by again called sp(child SPs)
now when i am trying to use the same table variable in the child SP, at the time of compliation it is showing error
Msg 1087, Level 15, State 2, Procedure fwd_price_cons, Line 149
Must declare the table variable "@tmp_get_imu_retn".
Can any body give me the idea how to complile the child SP with the same table variable used in the main SP.
Thanks,
BPG
View 11 Replies
View Related
Mar 16, 2006
I'm trying to call a stored procedure in an Execute SQL task which has several parameters. Four of the parameters are input from package variables. A fifth parameter is an output parameter and its result needs to be saved to a package variable.
Here is the entirety of the SQL in the SQLStatement property:
EXEC log_ItemAdd @Destination = 'isMedicalClaim', @ImportJobId = ?, @Started = NULL, @Status = 1, @FileType = ?, @FileName = ?, @FilePath = ?, @Description = NULL, @ItemId = ? OUTPUT;
I have also tried it like this:
EXEC log_ItemAdd 'isMedicalClaim', ?, NULL, 1, ?, ?, ?, NULL, ? OUTPUT;
Here are my Parameter Mappings:
Variable Name Direction Data Type Parameter Name
User::ImportJobId Input LONG 0
User::FileType Input LONG 1
User::FileName Input LONG 2
User::FilePath Input LONG 3
User::ImportId Output LONG 4
When this task is run, I get the following error:
0xC002F210 at [Task Name], Execute SQL Task: Executing the query "EXEC log_ItemAdd @Destination = 'isMedicalClaim', @ImportJobId = ?, @Started = NULL, @Status = 1, @FileType = ?, @FileName = ?, @FilePath = ?, @Description = NULL, @ItemId = ? OUTPUT" failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_I4)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The User::ImportId package variable is scoped to the package and I've given it data types from Byte through Int64. It always fails with the same error. I've also tried adjusting the Data Type on the Parameter Mapping, but nothing seems to work.
Any thoughts on what I might be doing wrong?
Thanks.
View 4 Replies
View Related
Nov 6, 2002
Hi all,
Is it possible to pass a table variable to a Stored proc or a function?
If it is can you give me the sentax.
TIA,
View 3 Replies
View Related
Apr 20, 2001
Using SQL Server 7 I am trying to modify an existing stored proc and make it more flexible. The below example represents the first part of that proc. The temp table that it should return is then used by another part of the proc (this query represents the foundation of my procedure). I need to figure a way to change the SQL Select statement, choosing between C.CONTRACTCODE and CB.EMPLOYERCODE on the fly. The query below will run but no records are returned. I am starting to believe/understand that I may not be able to use the @option variable the way I am currently.
I've tried creating two SQL statements, assigning them as strings to the @option variable, and using EXEC(@option). The only problem with this is that my temp table (#savingsdata1) goes out of scope as soon as the EXEC command is complete (which means I can not utilize the results for the rest of the procedure). Does anyone know how I can modify my procedure and incorporate the flexibility I've described?
Thanks,
Oliver
CREATE PROCEDURE test
@ContractCode varchar(10),
@dtFrom datetime,
@dtTo datetime,
@Umbrella int
AS
declare @option varchar(900)
if @umbrella = 0
set @option = 'c.contractcode'
else
set @option = 'cb.employercode'
select
c.claimsno,
c.attenddoctor,
c.patientcode,
p.sex,
cb.employercode
into #SavingsData1
from claimsa c inner join Patient p
on c.patientcode = p.patientcode
inner join claimsb cb on c.claimsno = cb.claimno
where
@option = @ContractCode and c.dateentered between @dtFrom and @dtTo
and c.claimsno like 'P%' and p.sex in('M','F') and c.attenddoctor <> 'ZZZZ'
select * from #SavingsData1
View 1 Replies
View Related
Jan 8, 2004
I have a stored proc that inserts into a table variable (@ReturnTable) and then ends with "select * from @ReturnTable."
It executes as expected in Query Analyzer but when I call it from an ADO connection the recordset returned is closed. All the documentation that I have found suggests that table variables can be used this way. Am I doing somthing wrong?
View 1 Replies
View Related
Jul 20, 2005
Hi, I'm trying to run a stored proc:ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust=(SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)When I remove the SELECT @varCust= I get the correct return. With itin, it just appears to run but nothing comes up in the output window.PLEASE tell me where I'm going wrong. I'm using MSDE, although I don'tthink that should matter?Thanks, Kathy
View 2 Replies
View Related
Jun 12, 2006
Hello,
I'm attempting to pass a datetime variable to a stored proc (called via sql task). The variables are set in a previous task where they act as OUTPUT paramters from a stored proc. The variables are set correctly after that task executes. The data type for those parameters is set to DBTIMESTAMP.
When I try to exectue a similar task passing those variables as parameters, I get an error:
Error: 0xC002F210 at ax_settle, Execute SQL Task: Executing the query "exec ? = dbo.ax_settle_2 ?, ?,?,3,1" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If I replace the 2nd and 3rd parameters with quoted strings, it is successful:
exec ?= dbo.ax_settle ?, '3/29/06', '4/30/06',3,1
The stored proc is expecting datetime parameters.
Thanks for the help.
Mike
View 3 Replies
View Related
Apr 1, 2008
In the old DTS package, we can use Active-x script to set the variable value:
DTSGlobalVariables("MessageData").Value = "This is a test"
How do we do the same thing on the SSIS?
I am under the "control Flow" tab.
Thanks.
View 11 Replies
View Related
Oct 4, 2006
Hi guys, I have the following store procedure:PROCEDURE dbo.AddSearchColumn (@A1, @A2. @A3, @A4, @A5) ASDeclare @cElements cursor,@DocNum varchar(100)BEGIN Set @cElements = cursor for select FirstNaname rom dbo.DocTable1open @cElements fetch NEXT from @cElements into @DocNumwhile (@@FETCH_STATUS = 0) begin if (@DocNum==@A1 //Here is what I need to do: I want use @A1 at the first loop step, @A2 at the second, and so on....... // @A1, @A2 are the parameters in inputendENDclose @cElementsDEALLOCATE @cElements I hope my explanation is clear.Please, give some hints.Thanks for your time,Christian Malatesti
View 7 Replies
View Related
Jun 12, 2002
Ok, I have a table with several column all labeled, column1, column2, etc. I need to loop through them so I have this statement which will loop through and get the first value, then go to colun2, etc
declare @score int
declare @stm nchar(500)
set @score=0
While @score<=50
Begin
Set @score=@score+1
set @stm='select column' + rtrim(convert(char(2),@score))+' from tablename'
exec sp_executesql @stm
if @score>50
Break
else
COntinue
end
My question is, how can I stuff this value from the dynamic sql into a variable such as:
set @newvalue='exec sp_executesql @stm '
Thanks,
Eddie
View 2 Replies
View Related
Oct 8, 2004
Hi guys
I have a trigger which retrieves database names from a table.
I need to use this retrieved database name in another sql insert statement as a variable
e.g. set @mydbname = Select .... from.. (to get the database name)
then..
insert into @mydbname.dbo.emplTable
At the moment it reads @mydbname as the string "@mydbname" not the value the variable holds
I need the database name as a variable because i have to write to the correct database (there are 15)
Any help appreciated
Rowan
View 2 Replies
View Related
Jun 2, 2008
Hi,
how to use a Dynamic variable on a function, to explan my self more here is a sample, we use this on SP but the function not allow executing.
DECLARE @SQL nvarchar(1000);set @sql=''
DECLARE @RESULT nVARCHAR(1000);SET @RESULT=''
DECLARE @mpq int;SET @mpq=0
DECLARE @FILENAME VARCHAR(40);SET @FILENAME='parm'
SELECT @RESULT =SCHEMA_NAME((SELECT SCHEMA_ID FROM SYS.TABLES WHERE NAME=@FILENAME))+'.'
SET @SQL=N'SELECT @mpq = CASE WHEN MPQ=1 THEN 10 WHEN MPQ=2 THEN 100 WHEN MPQ=3 THEN 1000 END FROM '+@RESULT+'PARM'
EXEC SP_EXECUTESQL @SQL,N'@mpq INT OUTPUT',@mpq OUTPUT
View 9 Replies
View Related
Jul 23, 2005
I know this has been dealt with a lot, but I would still reallyappreciate help. Thanks.I am trying to transform this tableYY--ID-Code-R1-R2-R3-R4...R402004-1-101--1--2-3-42004-2-101--2--3-4-2....2005-99-103-4-3-2-1Into a table where the new columns are the count for 4-3-2-1 for everydistinct code in the first table based on year. I will get the yearfrom the user-end(Access). I will then create my report based on theinfo in the new table. Here's what I've tried so far (only for 1stcolumn):CREATE PROCEDURE comptabilisationDYN@colonne varchar(3) '*receives R1, then R2, loop is in vba access*ASDECLARE @SQLStatement varchar(8000)DECLARE @TotalNum4 intDECLARE @TotalNum3 intDECLARE @TotalNum2 intDECLARE @TotalNum1 intSELECT SQLStatement = 'SELECT COUNT(*) FROMdbo.Tbl_Réponses_Étudiants WHERE' + @colonne + '=4 AND YY = @year'EXEC sp_executesql @SQLStatement, N'@TotalNum4 int OUTPUT', @TotalNum4OUTPUT INSERT INTO Comptabilisation(Total4) VALUES (@TotalNum4)GO
View 6 Replies
View Related
