How To Compare Two Stored Procedures

Apr 19, 2001

Hi,

The Process that goes on here is developers send the stored procedure i deloy them on development machine and upon request send them to QA / PROD

The problem here they send sp's quite often and i update them every time..now because of some mismatch they want to revert to the old version...back i don't know how to do it...and the possiblity is if i can compare the version they r having a the version in database that will help me a lot..

How do i campare the storedprocedure to check if both the one are similar or not.

And can any one guide me what's the basic process that normally any of u guys undergo so that u can revert back to the previous with basically saving the script file everytime..what r the standards and name conventions that need to be followed.

I know there r lots of issues i expressed ..thanks a lot for u help and suggestions...

Kavitha

View 2 Replies


ADVERTISEMENT

Oracle Stored Procedures VERSUS SQL Server Stored Procedures

Jul 23, 2005

I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!

View 11 Replies View Related

Stored Procedures 2005 Vs Stored Procedures 2000

Sep 30, 2006

Hi,



This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.



Thank you in advance for any help on this matter



View 1 Replies View Related

All My Stored Procedures Are Getting Created As System Procedures!

Nov 6, 2007



Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.

For example, even this simple little guy:

CREATE PROCEDURE BOB

AS

PRINT 'BOB'

GO

Gets created as a system stored procedure.

Any ideas what would cause that and/or how to fix it?

Thanks,
Jason

View 16 Replies View Related

Stored Proc Compare...

Jun 9, 2000

Hi,

I'm using SQL

View 1 Replies View Related

Stored Proc Compare...

Jun 9, 2000

Hi,

I'm using SQL Server 7.0. I have a Production database and a Development database. I have stored procedures with the same name in both databases. Is there a utility that I can use to see if the version that is in the production database is the same as the one in development and, if not, what are the differences between the two?

Thanks in advance,
Darrin

View 1 Replies View Related

Compare 2 Stored Proc Results

Jun 10, 2008

Hi guys. I'm trying to compare the results from various stored procedures. Various stored procedures in our database got redone (refactored), and I want to see if they still pull back the same data.

Are there any programs out there that do this? Compare result sets from stored procedures? Any help is appreciated. Thanks!

View 1 Replies View Related

Stored Procedure To Compare Dates

Mar 20, 2008

Hi:

Well, I am venturing into new territory for me. I'm very illiterate when it comes to SQL Server and so I need assistance. I have the beginnings of my stored procedure, which is supposed to compare two dates/times and If they are not equal I need to kick off a DTS Package.

So, here's what I have so far (it returns two dates like I would expect):

CREATE PROCEDURE usrCompareDataDownload
AS
BEGIN
SELECT MAX(ASP_ZZ_CHNG_TMST) FROM tbl_MaterialWeeklyData;
SELECT MAX(ZZ_CHNG_TMST) FROM TV_ASP_DPUL_WKLY;

END
GO


Thanks,

Bob Larson

View 5 Replies View Related

Compare Datetime In Stored Procedure

Mar 14, 2008

Hi,

Can i compare date = null in stored procedure? Does this work? The syntax works but it never get into my if else statement? The weird thing here is it has been working and just this morning, it stopped. I don't know why? Could you please help? Thanks,


set ANSI_NULLS ON

set QUOTED_IDENTIFIER ON

go











ALTER PROCEDURE [dbo].[UpdateActiveStates1]

@PROVIDERID INT

AS

DECLARE @STARTDATE DATETIME

DECLARE @ENDDATE DATETIME

DECLARE @ACTIVE BIT

SET @ACTIVE = 0

SET @STARTDATE = (SELECT ProhibitionStartDate FROM Providers WHERE ProviderID=@PROVIDERID)

SET @ENDDATE = (SELECT ProhibitionEndDate FROM Providers WHERE ProviderID=@PROVIDERID)

IF ((@STARTDATE = NULL OR @STARTDATE = '1753-01-01') AND (@ENDDATE = NULL OR @ENDDATE = '1753-01-01'))

BEGIN

PRINT 'Setting Inactive due to NULL Start Date and NULL End Date'

SET @ACTIVE=0

END

ELSE IF (@STARTDATE != NULL AND @STARTDATE <= GETDATE())

BEGIN

IF (@ENDDATE = NULL)

BEGIN

PRINT 'Setting Active due to NON-NULL Start Date and NULL End Date'

SET @ACTIVE=1

END

ELSE IF (@ENDDATE >= GETDATE())

BEGIN

PRINT 'Setting Active due to NON-NULL Start Date and NON-EXPIRED End Date'

SET @ACTIVE=1

END

ELSE

BEGIN

PRINT 'Setting Inactive due to NON-NULL Start Date and EXPIRED End Date'

SET @ACTIVE=0

END

END

UPDATE Providers SET Active=@ACTIVE

WHERE ProviderID=@PROVIDERID

UPDATE Actions SET Active=@ACTIVE WHERE ProviderID=@PROVIDERID







View 2 Replies View Related

How To Search And List All Stored Procs In My Database. I Can Do This For Tables, But Need To Figure Out How To Do It For Stored Procedures

Apr 29, 2008

How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
 SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'

View 1 Replies View Related

Using A Stored Procedure To Query Other Stored Procedures And Then Return The Results

Jun 13, 2007

Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB  multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived,     I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID,    S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName',    T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID    FROM [Item].ItemDetails I    INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID    INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived,     I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID    FROM [Item].ItemDetails IOr something like that... Any thoughts? 

View 3 Replies View Related

How To Save Stored Procedure To NON System Stored Procedures - Or My Database

May 13, 2008

Greetings:

I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.

How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?

Thanks!

View 5 Replies View Related

Stored Procedure Being Saved In System Stored Procedures

Apr 7, 2006

We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.

For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.

I can't update the sys.Objects or sys.Procedures views in 2005.

What effect will this flag (is_ms_shipped = 1) have on my stored procedures?

Can I move these out of "System Stored Procedures" and into "Stored Procedures"?

Thanks!

View 24 Replies View Related

How Can I Call One Or More Stored Procedures Into Perticular One Stored Proc ?

Apr 23, 2008

Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?



How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.

View 1 Replies View Related

SSIS And Stored Procedures Results Stored In #Tables

Mar 26, 2008

Hello
I'm start to work with SSIS.

We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:


SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'

EXEC @RETVAL = sp_executeSQL @SQLSTRING


How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)

I found a way but I think i'ts only a workaround:

1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)

Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?

Thanks for an early Answer
Chaepp

View 9 Replies View Related

Compare Utilities For Comparing Stored Procedure Results?

Dec 10, 2007

I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.

So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?

View 6 Replies View Related

SQL 2012 :: Compare Two Similar Databases (A And B) Stored Procedure?

Dec 3, 2014

Is there any way to compare two similar databases (A & B) stored procedure. I have to find stored procedure in second database B with respect to the difference.

View 7 Replies View Related

Compare With Multiple Date Values Passed Into Stored Procedure?

Dec 14, 2012

I have a scenario where I need to compare a single DateTime field in a stored procedure against multiple values passed into the proc.So I was thinking I could pass in the DateTime values into the stored procedure with a User Defined Table type ... and then in the stored procedure I would need to run through that table of values and compare against the CreatedWhenUTC value.I could have the following queries for example:

WHERE CreatedWhenUTC <= dateValue1 OR CreatedWhenUTC <= dateValue2 OR CreatedWhenUTC <= dateValue 3

The <= is determined by another operator param passed in. So the query could also be:

WHERE CreatedWhenUTC > dateValue1 OR CreatedWhenUTC > dateValue2 OR CreateWhenUTC > dateValue3 OR CreateWhenUTC > dateValue4

View 3 Replies View Related

MS SQL Stored Procedures Inside Another Stored Procedure

Jun 16, 2007

Hi,
 Do you know how to write stored procedures inside another stored procedure in MS SQL.
 
Create procedure spMyProc inputData varchar(50)
AS
 ----- some logical
 
 procedure spMyProc inputInsideData varchar(10)
AS
   --- some logical
  ---  go
-------

View 5 Replies View Related

Calling Stored Procedures From Another Stored Procedure

May 8, 2008

I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.

The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?

Thanks in advance

John

View 5 Replies View Related

Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)

Nov 1, 2007

Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly.  For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') 
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). 
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
 

View 1 Replies View Related

Only Functions And Extended Stored Procedures Can Be Executed From Within A Function. Sp_executesql Is A Extended Stored Prod

May 15, 2008

i have created the folowing function but keep geting an error.

Only functions and extended stored procedures can be executed from within a function.

Why am i getting this error!

Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)

set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'

execute sp_executesql @sqlval
return @ret
end

View 3 Replies View Related

Stored Procedures

Jun 17, 2006

hi

i need to use only one stored procedure and access many tablesso how write a stored procedure for that dohelp me looking forward for a reply to the earliest i am developing web page using asp.net using c# and sqlserver as backend

looking forward for a replygayathri

View 1 Replies View Related

Stored Procedures

Dec 15, 2006

I am interested to know about stored procedures in Mssql .Can anyone please help me out.
 
Thanx in advance. 

View 1 Replies View Related

Help With Stored Procedures

Feb 24, 2007

Hello I have two stored procedures
@ID INT
AS
SELECT (CASE WHEN NUM >= 10 THEN CAST(PAID AS FLOAT) / CAST(NUM AS FLOAT) * 100 WHEN NUM < 10 THEN 0 END) AS PER
FROM (SELECT (SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Player_id = @ID)) AS NUM,
(SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Transaction_value > 0) AND (D.Player_id = @ID)) AS PAID) AS X
and
@ID INT
AS
SELECT P.*,'/' + DBO.GETCHIPFOLDER(@ID) + '/' + ISNULL(P.PHOTO,'BLANK.GIF') AS PIC,ISNULL(
(SELECT SUM(TRANSACTION_VALUE)
FROM EVENT_DATA WHERE PLAYER_ID=@ID AND TRANSACTION_TYPE=1
GROUP BY PLAYER_ID),0) AS WINNINGS FROM PLAYERS P
undefined P
 
The first returns a percentage for player wins, the second gives me a photo and sums the player winnings
 I would like to combine the results so I can get the percentage and wininngs in one query,  in another matter all together I would like create a procedure like the first but instead of returning only one player, I would like to return the percentage for each player
Thanks in advance for any light you can shine on this.

View 4 Replies View Related

Stored Procedures

Feb 25, 2007

I have a question about stored procedures, Is it better to use stored procedures even if I only use it once at my site? Or is it better to write the sql-part directly in the sqldatasource?
And am I forced to create two different stored procedures even if they are exactly the same except the "Where-part"?
Now I have around 40 stored procedures, and quite many of them looks the same except the where-part...
(Iam just a beginner with SQL)

View 2 Replies View Related

Stored Procedures

May 2, 2007

Hello every one,
                         I m working in aspx 2.0 with sql server 2005, please tell me how can I create  Stored Procedures for two or more tables not a single table(select,insert,update,delete please send me the queries which can help me in easy way I will very thankful to you
Thank you

View 5 Replies View Related

Help On Stored Procedures

Jun 19, 2007

I am learning to make a ASP web site and feel that if i can do it the harder way using some stored procedures instead of using multiple datasources on each page requiring that it might be better. So i am wondering what are these used for:DECLARE vs just entering "@param1 varchar(30)"When i use "DECLARE @rc int" i get the error "Incorrect syntax near DECLARE"How to return values to ASP page in Visual Studio 2005 How to use @@rowcount - doesn't seem to work for me?i tried using DECLARE @rc intSET @rc = @@rowcountWhen to use GO, BEGIN etcIf i want to use the variable only in the procedure, and not needed to be inputed, do i need to put it in the CREATE PROCEDURE (section)?Should i use my own stored procedures or VS2005 created ones using datasources? not really procedures but SQL, in SQL can i do like IF ELSE? if i use my own i cant use the Optimistic Concurrency right? and whats that?

View 1 Replies View Related

Stored Procedures

Jul 5, 2007

Is there a website or somewhere i can go to read up on stored procedures??

View 2 Replies View Related

Stored Procedures

Aug 2, 2007

cREATE PROCEDURE emp @val varchar(50)AS
declare @test varchar(50)declare @a varchar(50)set @a= @val + '_a'set @test = 'alter table dbo.rights_user add ' + @a + ' varchar(50) null'
execute(@test)
GO
this is my procedure...anyth wrong here...i can able to execute procedure only with 3 char..egexec emp 'na'exec emp 'hr10'--->wen i try like this  cannot..showing datataype mis match
 

View 2 Replies View Related

Can't See Stored Procedures

Nov 18, 2007

Hi,
 Can anyone help me. I've created a stored procedure in sql server and I'm trying to run it from my asp.net page. On Database Explorer I can't see it, or any for that matter, however I can see tables in the same schema.
Also I can't see it when I build a table adapter either.
Can anybody help?
 Thanks
 Sam
 

View 5 Replies View Related

Using Stored Procedures In Asp.net

Dec 22, 2007

 Hi,how can I use stored procedures in asp.net. The stored procedure itselve is defined on the sqlserver and works fine.Actual I found out that in my asp.net 2-surrounding there can be the adofunction disabled.I tried to use it with dimension of a new SqlConnection but I'm woundering why within a visual basic part I don't get the codecompletion whenI use the dimensioned object combined with commands.Regards,Ruprecht Helms  

View 2 Replies View Related

Stored Procedures

Jan 8, 2008

Hi,I have a procedure that insert some values into database. The point is, when somebody doesn't fill up a certain field on the form, I don't want the procedure to insert an empty row into database. The procedure looks like this:@tresc text,    @id_test int,            @odp text,    @correct bit,            @odp1 text,    @correct1 bit,            @odp2 text,    @correct2 bit,        @odp3 text,    @correct3 bit,        @odp4 text,    @correct4 bit,        @odp5 text,    @correct5 bit,        @odp6 text,    @correct6 bit,        @odp7 text,    @correct7 bit    ASDeclare @id_utworzonego_pytania intBeginSet nocount on    Insert into Pytanie     (tresc,id_test)    values (    @tresc,@id_test)        select @id_utworzonego_pytania=@@IDENTITY                    if(@odp is not null)    BEGIN        Insert into Odpowiedz        (odp,correct,id_pytania)        Values        (@odp,@correct,@id_utworzonego_pytania)    END        Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp1,@correct1,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp2,@correct2,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp3,@correct3,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp4,@correct4,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp5,@correct5,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp6,@correct6,@id_utworzonego_pytania)    Insert into Odpowiedz    (odp,correct,id_pytania)    Values    (@odp7,@correct7,@id_utworzonego_pytania)    SET NOCOUNT OFF        END And the code:con = new SqlConnection("Data Source=ELF;Initial Catalog=logos;Integrated Security=True");        SqlCommand cmd = new SqlCommand("StoredProcedure2", con);        cmd.CommandType = CommandType.StoredProcedure;        cmd.Parameters.Add(new SqlParameter("@tresc", TextBox1.Text));        cmd.Parameters.Add(new SqlParameter("@id_test", id));            cmd.Parameters.Add(new SqlParameter("@odp", TextBox10.Text));            cmd.Parameters.Add(new SqlParameter("@correct", RadioButtonList2.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp1", TextBox2.Text));                cmd.Parameters.Add(new SqlParameter("@correct1", RadioButtonList1.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp2", TextBox3.Text));        cmd.Parameters.Add(new SqlParameter("@correct2", RadioButtonList3.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp3", TextBox4.Text));        cmd.Parameters.Add(new SqlParameter("@correct3", RadioButtonList4.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp4", TextBox5.Text));        cmd.Parameters.Add(new SqlParameter("@correct4", RadioButtonList5.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp5", TextBox6.Text));        cmd.Parameters.Add(new SqlParameter("@correct5", RadioButtonList6.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp6", TextBox7.Text));        cmd.Parameters.Add(new SqlParameter("@correct6", RadioButtonList7.SelectedValue));        cmd.Parameters.Add(new SqlParameter("@odp7", TextBox8.Text));        cmd.Parameters.Add(new SqlParameter("@correct7", RadioButtonList8.SelectedValue));               con.Open();        cmd.ExecuteNonQuery();        con.Close();It works perfectly if someone fill all the textboxes; but it is not required. So when you leave an empty textbox, the procedure inserts an empty row into database. Please, help!Regards,N. 

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved