Hi,
I have a requirement to do a data migration work for a Japanese client. The problem is I don't know Japanese and the client SME does not know English. So, my requirement is, I should be able to create a SSIS package in English and then should be able to compile or translate it into Japanese so that my Japanese SME can understand the package. Is it possible to do? If so, how can I do it?
Thanks in advance.
When I compile or save a SSiS package in the SQL Server Business Intelligence Development Studio I get the error
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program.
Sometimes, if I wait longer time, the package can suddenly be saved.
I have 2 GB of RAM und over 15 GB of free space on my disk. Thus, there should be anough space to save the package.
What should I do to resolve this problem? It seems to be a bug.
To splitt the package would not be a solution.
Hi everyone,
My current dutie is translate Vb code into SSIS. The following structure is getting me totally crazy:
sql = "SELECT * FROM TABLE1 WHERE FIELD = XXXX"
rs.execute sql
WHILE NOT RS.EOF
STUFF
ANOTHER SELECT AND ANOTHER LOOP
...
...
INSERT AND DELETE STUFF
END WHILE
Which is the best method in order to reach this goal? I'm trying to by means of OLEDB Source Editor connected to Script Component Task on data flow layer but I'm stuck with this.
I don't want to do cursors or something like that with T-SQL.
Thanks in advance for your inputs/help and regards,
Hi everyone,
We're struggling ourselves with this and we are stuck.
Which is the equivalent for a SSIS in a Script Task component on CONTROL FLOW layer?
Main = DTSStepScriptResult_ExecuteTask
Thanks for your input and regards,
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedI would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
Welcome
i am want to teach sql . how to
install compile
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View Related
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
Can i use Translate function in sql server query? How i ll use? In my oracle, i m using a Translate function, but i want to run that in sql server. How to do that?
View 3 Replies View RelatedHi allIs there a TSQL function like Oracle's Translate function? Where:Translate('13,000Miles','abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOP QRSTUVWXYZ, ',' ') wouldreturn '13000'?I'm trying to extract a number from a string. REPLACE doesn't quite dowhat I want.Thanks
View 1 Replies View Relatedim trying to find the equivalent of the below oracle code in sql server.But to my knowledge i feel "translate "is not supported by sql server. so please send me the equivalent sql server query for this.SELECT 'http://ploft.com/ploft?y='||translate(comp,' ','+')||',+'||translate(california,'','+')||',+'||ca||'+'||pzINTO :ls_MAP FROM project WHERE portno=:dbno;
View 3 Replies View RelatedIn the below query i need to display the amount in words also. How to do that in sql server 2008 R2?
SELECT ROUND(SUM(BM.CONCESSION_AMOUNT_M),2)AS[TOTAL_CONCESSION_GIVEN] FROM BILL_MASTER BM
Can anyone help me translate this statement from using the legacyouter joins to the SQL-92 standards?Select CA.* From Customer C, Shipper S, Customer_Order CO,Cust_Address CA Where CA.Customer_ID =* CO.Customer_IDand CA.Addr_No =* isnull(S.Ship_To_Addr_No,CO.Ship_To_Addr_No)and C.ID = CO.Customer_IDand (S.Shipped_Date between '1/1/2003' and '12/31/2003')Try as I may, I simply can't find a working left, right, or full outerjoin statement that would give me the same results as the abovestatement gives. I thought this was suppose to work but don't knowwhy it doesn't. Anybody care to try or perhaps tell me why thestatement below doesn't work:Select CA.* From Customer C, ((Customer_Order CO left outer joinCust_Address CA on CA.Customer_ID = CO.Customer_ID) left outer joinShipper S on CA.Addr_No =isnull(S.Ship_To_Addr_No,CO.Ship_To_Addr_No)) Where C.ID =CO.Customer_IDand (S.Shipped_Date between '1/1/2003' and '12/31/2003')Thanks,Tony
View 4 Replies View RelatedHi everyone,
We're trying to migrate a varchar field from Sql2k to varbinary in a sql25k through a dtsx package. We get an error which tell us: "data will be lost".
Does anyone have any idea about that?
Thanks for your time and inputs,
Hi,
How to translate oracle Decode without changed code I mean:
I have one application and instead to change all decode to case when I would like just replace decode for dbo.decode, so I
Wrote this function
select dbo.fnDecode( 1 , 2 , 3 )
first parameter always int, and the others parameters could be char, int or float.
I would like to test first value and return second or third value
-> sql_variant for all parameters, ok
but I can use + or -
I can't do this
select dbo.fnDecode( 1 , 2 , 3 ) + dbo.fnDecode( 1 , 2 , 3 )
If I put cast ok, but I is there another way, overload this call?
With clr doesn't work, because Sql Server doesn't accept function overload calls from C#
Any ideia????????????????????
cheers,
Hello,
I€™m new to this forum and my knowledge about RDL is very limited. We are developing software localization tools and some of our customers have requested a solution to translate RDL files.
Our tool has a generic XML parser so I reviewed the RDL documentation but didn€™t found any information about which XML elements do have translatable content. If there anyone who knows this or is there any documentation around describing which elements must be translated?
I also saw some proposals regarding the internationalization of RDL files. It seems that the proposed solutions were designed for developers and not for professional translators. In an environment where you have to translate several hundreds of RDL files into let€™s say 20 languages you can€™t expect that translators start to code RDL files. Are there any other approaches that can be used for a more efficient translation of RDL files?
Any feedback is appreciated.
Achim Herrmann
Is it possible to translate a DTSX/XML file into VB.Net or C# code, like you can do with a WSDL file? If so, is there a SSIS utility or third party available? Thank you.
JGL
Hi,
I have an alphanumeic string as one of the column values.I want to get numeic value out of the string.
I was planning on translating all the characters of the alphanumeric sting to spaces and then using ltrim and rtrim on it should give me the required numeric sring.But there is no translate function in sql server
Example: abcd123xy 123
xyz45 45
Can someone provide me a way to get the numeric value out of the strng.
Thanks
Bobby
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
When I try and create the following stored procedure, I get the following error message:
Any ideas as to what went wrong? Here is the stored procedure
USE [DBS07]GO/****** Object: StoredProcedure [dbo].[updateMarketName] Script Date: 09/17/2007 22:28:20 ******/SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[updateSubMarketName]( @inMarketId int, @inSubMarketId int, @inSubMarketDescription nvarchar(100), @inActive nvarchar(2), @inLastUpdateDate datetime, @inLastUpdateUser nvarchar(100))AS SET NOCOUNT OFF;UPDATE [SubMarket] SET [SubMarketDescription] = @inSubMarketDescription, [Active]= @inActive, [LastUpdateDate] = @inLastUpdateDate,[LastUpdateUser] = @inLastUpdateDateUserWHERE ([MarketId] = @inMarketId)AND (SubMarketId]= @inSubMarketId)
Here is my error message
Error message in Red:Msg 137, Level 15, State 2, Procedure updateSubMarketName, Line 12Must declare the scalar variable "@inLastUpdateDateUser".
I have one procedure that gets executed many times per day(thousands at least). I consistently get blocking in my database, as users compile this stored procedure. How can I keep this from recompiling all the time, and bogging down my database? I tried the keep plan option in the portion of the code that uses tembdb, and that doesn't work. thanks.
View 1 Replies View RelatedI got some problem about message "Compile Error, In Query expression "
Someone help me please
Best Regard
My E-mail = paiboonm@cuel.co.th