How To Conditionally Or Programmatically Run A Stored Procedure With Command Type Set To Storedproc?
May 21, 2008
I'm using SQL RS 2005 and have a report where we want the report to run a different stored procedure depending on if a condition is true. I've set my 'command type' to stored proc and can type in the name of a stored procedure. If I type in just one stored procedure's name, it runs fine. But if I try to use a =IIF(check condition, if true run stored proc 1, if false run storedproc 2) then the exclamation (run) button is greyed out. Does anyone know how I can do this? Thanks.
View 3 Replies
ADVERTISEMENT
Feb 21, 2006
Im having a play using @@identity
I want to insert some data into a table
Get the AutoID value on the inserted data
then insert some other data into another table
and set its id value to the captured @@identity
My question
I only want to do the second insert only if
@FieldValue2 contains a value ie not empty
below is a basic procedure without conditonal part
Code:
CREATE PROCEDURE conditional_Insert
@FieldID As int,
@FieldValue As Nvarchar(50),
@FieldValue2 As Nvarchar(50)
AS
declare @id int
set nocount on
INSERT INTO Table1(fieldID,fieldvalue)
VALUES( @FieldID, @FieldValue)
set @id = @@identity
INSERT INTO Table2(fieldID2, FieldValue2)
VALUES(@id, @FieldValue2)
select @id
GO
View 2 Replies
View Related
May 19, 2004
Hi all,
I have a stored like this
CREATE PROCEDURE fts_insert_service_tasks( @status_no int output, @status_text nvarchar(255) output, @fts_employee char(100) , @fts_SCCode bigint, @fts_TaskDescription ntext) AS
declare @str_err nvarchar(255)
declare @err_no int
set @err_no=0
if ( isnumeric(@fts_SCCode) = 0 )
begin
set @str_err ='The fts Sccode is not a number'
set @status_text = @str_err
set @err_no=@err_no+1
return
end
if ( @fts_SCCode = '' )
begin
set @str_err ='The fts Sccode can not be null '
set @status_text = @str_err
set @err_no=@err_no+1
return
end
if ( len(@fts_employee) > 100)
begin
set @str_err ='Maximum Employee length allowed is 100 characters'
set @status_text = @str_err
set @err_no=@err_no+1
return
end
if ( @fts_employee = '' )
begin
set @str_err ='The employee fiedl can not be null'
set @status_text = @str_err
set @err_no=@err_no+1
return
end
if (@err_no=0)
begin
INSERT INTO fts_ServiceTasks (fts_employee , fts_Sccode, fts_taskdescription)
VALUES(@fts_employee, @fts_SCCode, @fts_taskdescription)
set @status_no=0
set @status_text = 'Add Service Task Ok'
end
else
begin
set @status_no=@err_no
set @status_text = @str_err
end
GO
and I called it from the ASP
<%function Add_Service_Task(fts_employee,fts_sccode, fts_TaskDescription)
cm.ActiveConnection = m_conn
cm.CommandType = 4
cm.CommandText = "fts_insert_service_tasks"
cm.Parameters.refresh
cm.Parameters(3).Value = fts_employee
cm.Parameters(4).Value = fts_sccode
cm.Parameters(5).Value = fts_TaskDescription
on error resume next
cm.Execute
if cm.Parameters(1)=0 then
exec_command=cm.Parameters(2).Value
else
call obj_utils.ErrMsg(cm.Parameters(2).Value,3000)
Response.End
end if
if err.number <> 0 then
call obj_utils.ErrMsg("System error at " & err.number & err.Description & ", please contact the administrator", 5000)
Response.End
end if
Add_Service_Task=exec_command
end function%>
I test with SQL 2k, Win2k3 OK
But with Win2k i got:
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80040E30)
Type name is invalid.
/fmits/classes/cls_servicecall.asp, line 256
Please help me!
View 2 Replies
View Related
Mar 20, 2006
Su writes "I'm trying to use a stored procedure to dynamically update a table whenever other staff in other departments update their do any changes to their databaseds. and thanks for your web site taught me how to pass table names as parameters. But I still have problems withe sql command. You have an example in your article ('dynamic sql 2'), showing how to do a sql SELECTION using a table name and a local variable. But the sql command only use a local variable of varchar type. I'm trying to do INSERT with local variables with different data types. For example:
CREATE PROCEDURE KPISU_F_TotalByF
@inputT_From varchar(10),
@inputT_To varchar(10),
@TableName varchar(1000)
AS
-----------------------------------------------------
--------input variable-------------------------------
DECLARE @inputTerm_From varchar(10),
@inputTerm_To varchar(10),
@sql_empty varchar(2000),
@sql_refresh varchar(2000)
----------------------------------------------------
IF EXISTS (select * from tempdb.dbo.sysobjects
where id LIKE object_id('tempdb..#tmpOTLTotalByF'))
DROP TABLE #tmpOTLTotalByF
CREATE TABLE #tmpOTLTotalByF (Faculty varchar(50),Term_From varchar(10), Total_G12 int, Total_G3 int, Total_G4 int, Total_Faculty int)
DECLARE @iFaculty varchar(50),
@iTerm_From varchar(10),
@iTotal_G12 int,
@iTotal_G3 int,
@iTotal_G4 int,
@iTotal_Faculty int
SET @iTotal_Faculty = 0
SET @iTotal_G12 = 0
SET @iTotal_G3 = 0
SET @iTotal_G4 = 0
DECLARE su_OTL_F_cursor CURSOR
FOR
SELECT Faculty, Term_From, SUM(Grades_12), SUM(Grades_3), SUM(Grades_4)
FROM #tmpOTLTotalByFaculty
GROUP BY Faculty, Term_From
OPEN su_OTL_F_cursor
FETCH NEXT FROM su_OTL_F_cursor INTO @iFaculty, @iTerm_From, @iTotal_G12, @iTotal_G3, @iTotal_G4
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @sql_refresh = 'INSERT '
SELECT @sql_refresh = @sql_refresh + @TableName
SELECT @sql_refresh = @sql_refresh + ' VALUES (' + @iFaculty + ', ' + @iTerm_From + ', ' + @iTotal_G12 + ', ' + @iTarget_12 + ', ' + @iTotal_G3 + ', ' + @iTarget_3 + ', ' + @iTotal_G4 + ', ' + @iTarget_4 + ', ' + @iTotal_Faculty + ')'
SET @iTotal_Faculty = 0
SET @iTotal_Faculty = @iTotal_G12 + @iTotal_G3 + @iTotal_G4
INSERT #tmpOTLTotalByF VALUES (@iFaculty, @iTerm_From, @iTotal_G12, @iTotal_G3, @iTotal_G4, @iTotal_Faculty)
Exec ( @sql_refresh)
FETCH NEXT FROM su_OTL_F_cursor INTO @iFaculty, @iTerm_From, @iTotal_G12, @iTotal_G3, @iTotal_G4
END
CLOSE su_OTL_F_cursor -----line 222
DEALLOCATE su_OTL_F_cursor
CLOSE su_OTL_T_cursor -----line 63
DEALLOCATE su_OTL_T_cursor
SELECT * FROM #tmpOTLTotalByF ORDER BY Faculty
SELECT * FROM KPISU_F_OTLTotalByF05 ORDER BY Faculty
GO
EXECUTE KPISU_F_TotalByF '2005', '2006', 'KPISU_F_OTLTotalByF05'
GO
----------------------------------------------------------
I got the following error message:
Server: Msg 245, Level 16, State 1, Procedure KPISU_F_TotalByF, Line 256
Syntax error converting the varchar value 'INSERT KPISU_F_OTLTotalByF06 VALUES (14-19 Academy, 2005, ' to a column of data type int.
-----------------------------------------------------------
I guess I could change all the columns in the table to data type of varchar. But are there any other way to solve this problem?
Many thanks.
Su"
View 1 Replies
View Related
Oct 23, 2007
Hi fellows
I am working in a formula about drilling machine. This machine sends the inofrmation to the server basically the name of a blasthole, revolution,pulldown and so on. I have another database with information of the same blasthole, but with different items such as drill diameter,site,area and so on, so i have two tables with information, but both of them have the same blasthole that means that i can relate with a join and identify each blasthole. but teh main point is that i have a specific column con a distance that the machine is drilling for example in a certain moment this machine is drilling 1 feet 3 feet 4 feet until to reach the bottom of a limit. his
My problem is that i want to create a from to for those distances.
table 1
pk diameter bench
dh1 12.5 4050
table 2
blasthole depth
dh1 1.2
dh1 3.5
dh1 4.7
dh1 5.4
dh1 8.3
dh1 15
with a join i can obtain something like this
view 1
blasthole diameter bench depth
dh1 12.5 4050 1.2
dh1 12.5 4050 3.5
dh1 12.5 4050 4.7
dh1 12.5 4050 5.4
dh1 12.5 4050 8.3
dh1 12.5 4050 15
the most difficult part is to include a new colum taht can start with 0 and to obtain teh previus value from depth something like this
view 1-A
blasthole diameter bench from depth
dh1 12.5 4050 0 1.2
dh1 12.5 4050 1.2 3.5
dh1 12.5 4050 3.5 4.7
dh1 12.5 4050 4.7 5.4
dh1 12.5 4050 5.4 8.3
dh1 12.5 4050 8.3 15
I was thinking to create a pk2 in order to know how many values have each blasthole and create a loop and maybe i can organize the column from something like this
pk2 blasthole diameter bench from depth
1 dh1 12.5 4050 0 1.2
2 dh1 12.5 4050 1.2 3.5
3 dh1 12.5 4050 3.5 4.7
4 dh1 12.5 4050 4.7 5.4
5 dh1 12.5 4050 5.4 8.3
6 dh1 12.5 4050 8.3 15
I hope that somebody can understand my question, but i think is a hard one for the forum
cheers
Edwin
View 4 Replies
View Related
Nov 5, 2003
How do you use a variable in the ORDER BY command in a sql statement.
I currently have:
****************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%'
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
SS_Sendback.PO
GO
*************************************
I changed it to
*************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%',
@Order varchar(20)
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
@Order
GO
and I receive the following error..
error1008: the select item identified by the Order By number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
How does it know @order is a position and not a column name... It's a variable. I'm obviously doing something wrong. Can someone help.
Thanks
View 5 Replies
View Related
Jul 14, 2001
Is it possible to create a stored procedure to run a custom dos command (eg. c:ProgramName param1 param2)?
Thanks,
Ben
View 1 Replies
View Related
Sep 30, 2013
I have a problem where bcp command is called and executed successfully sometimes but fails randomly.My stored procedure looks like this:
select @SQL = 'select * from [' + @RepositoryName + '] where ( IsNumeric([' + @PhoneField + ']) = ' + CONVERT(varchar(1), @FALSE) + ' OR LEN([' + @PhoneField + ']) <> ' + CONVERT(varchar(2), @ValidLength) + ')'
execute(@SQL)
set @Count = @@ROWCOUNT
if @Count > 0
EXEC sp_configure 'show advanced options', 1
RECONFIGURE
EXEC sp_configure 'xp_cmdshell', 1
RECONFIGURE
[code]....
The above procedure is called 4 times from another procedure by passing appropriate parameters. Most of the time, it executes successfully for 2 times before failing. When I try to debug, it always hangs at EXEC master..xp_cmdshell @CommandSQL. The task manager shows bcp.exe as running at this point. Interestingly, the required rows are exported using the bcp command, but the stored procedure does not move further until bcp.exe is manually stopped from the task manager.
View 2 Replies
View Related
Jun 4, 2007
Hi!I already sent this to the ACCESS newsgroup. But since I do not know reallywhich side is really causing the problem, I have decided to send thisinquiryto this newsgroup also, if I may.Below is the environment of the application:a. MS Access 2003 application running on Windows XPb. SQL Server 2000 - backend running MS Server 2003 OSBelow is the code that is giving me an error:Dim com As ADODB.CommandSet com = New ADODB.CommandWith com.ActiveConnection = "DSN=YES2;DATABASE=YES100SQLC;".CommandText = "sp_Recalculate".CommandType = adCmdStoredProc.Parameters.Refresh.Parameters("@ItemNumber") = ItemNum.Execute ' This is where it hangs up...TotalItems = .Parameters("@TotalInStock")TotalCost = .Parameters("@TotalCost")End WithSet com = Nothingand the store procedure is:CREATE PROCEDURE DBO.sp_Recalculate@ItemNumber nvarchar(50),@TotalInStock int = 0,@TotalCost money = 0ASBEGINSET @TotalInStock = (SELECT Sum([Quantity in Stock])FROM [Inventory Products]WHERE [Item Number] = @ItemNumber)SET @TotalCost = (SELECT Sum([Cost] * [Quantity in Stock])FROM [Inventory Products]WHERE [Item Number] = @ItemNumber)ENDWhen the process goes to the ".Execute" line, it hangs up for a long timethen gives me an error message "Everflow". I have been trying to solvethis issue but do not have an idea for now of the cause.Below is my finding:a. When I run the stored procedure in the SQL analyzer, it works just fine.I placed a SELECT statement to view the result of the stored procedure.It gives the correct values.Can anyone have ideas or similar problems?Thanks.
View 8 Replies
View Related
Feb 22, 2006
hi,i had a small doubt , i have a table xxx with two columns (a int,b int) and i have inserted 5 rows my query is to add the two colums using astored procedure and the result has to be displayed in an separatecolumn --this has to be done only stored procedures ---i know how tosolve the problem using computed columns conceptlike thiscreate table yyy(a int ,b int ,total as a+b)insert into yyy values (12,13)select * from yyyi need the answer using stored procedures---is it possiblepls help mesatish
View 1 Replies
View Related
May 23, 2006
Guys,
could someone please tell me : am I supposed to use the OLE DB
Command in a dataflow to call a stored procedure to return a value? Or
is it just supposed to be used to call a straightforward insert
statement only?
What I am hoping to do:
I have a table with a few columns and one identity column. In a
dataflow I would like to effect an insert of a record to this table and
retrieve the identity value of the inserted record... and I'd like to
store the returned identity in a user variable.
If I AM supposed to be able to do this... then how on earth do I do it?
I have spent hours fooling around with the OLE DB command trying to call a stored proc and get a return value.
In the Advanced Editor any time I try to add an output column (by
clicking on Add Column) I just get an error dialog that says "the
component does not allow adding columns to this input or output)
So, am getting pretty concussed .. banging my head of the wall like this...
So put me out of my misery someone please.... is the OLE DB Command intended for this or not?
Thanks
PJ
View 4 Replies
View Related
Feb 11, 2004
Hello,
Stuck in a spot and hoping someone will nudge me in the right direction....
I'm trying to write to a sql db via a storedprocedure using a parameter. i'm pretty certain the below statement is causing the problem. but i'm not sure how to properly refer to it....
Dim connString As String
connString = "integrated security=false;user id=sa;server=HCENT1;database=LicenseRenewal;persist security info=False"
Dim myConnection As New SqlConnection(connString)
Dim myCommand As New SqlCommand("InsertPage1", myConnection)
myCommand.CommandType = CommandType.StoredProcedure
' .......other (working) parameter statements.........
Dim parameterDates As New SqlParameter("@Dates", SqlDbType.VarChar, 4000)
parameterDates.Value = Session("lstDates")
myCommand.Parameters.Add(parameterDates)
myConnection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
the session("lstDates") is the contents of lstDates.Items (listbox) from a previous page.
i'm guessing its not valid to refer to it as a varchar, can someone point me to the proper way to handle this?
tia
andy
View 4 Replies
View Related
Feb 21, 2004
Hi everybody, I would like to know if it's possible to execute a stored procedure, passing it parameters, using not CommandType.StoredProcedure value of sqlcommand, but CommandType.Text.
I tried to use this:
sqlCmd.CommandType = CommandType.Text
sqlCmd.Parameters.Add(sqlPar)
sqlCmd.ExecuteNonQuery()
With this sql command:
"exec sp ..."
I wasn't able to make it to work, and I don't know if it's possible.
Another question:
if it's not possible, how can I pass a Null value to stored procedure?
This code:
sqlPar = new SqlParameter("@id", SqlDbType.Int)
sqlPar.Direction = ParameterDirection.Output
cmd.Parameters.Add(sqlPar)
sqlPar = new SqlParameter("@parent_id", DBNull)
cmd.Parameters.Add(sqlPar)
doesn't work, 'cause I get this error:
BC30684: 'DBNull' is a type and cannot be used as an expression.
How can I solve this?
Bye and thanks in advance.
P.S. I would prefer first method to call a stored procedure ('cause I could call it with 'exec sp null' sql command, solving the other problem), but obviusly if it's possible...=)
Sorry for grammatical mistakes.
View 9 Replies
View Related
Oct 1, 2007
Hi All,
I have created a dynamic SQL STATEMENT , but the result of the execution of that statement matters to me. within stored procedure.
Note: If run the statement using EXEC() command, the result gets displayed on the SQL Editor.
But I DO NOT KNOW HOW to Capture that value.
Any idea how to capture as I would like capture the result and stored it in a table.
Thank you.
--Israr
View 4 Replies
View Related
Apr 19, 2004
I am trying to supply a bit type parameter to a stored procedure. This is used to update a Bit type field in a table. The field is called PDI
The syntax I am trying to use is:
MyStoredProcedure.Parameters.Add(New SqlParameter("@Pdi",SqlDbtype.bit))
MyStoredProcedure.Parameters("@pdi").value = -1
When I do my ExecuteNonQuery I get error 8114
What am I doing wrong?
View 9 Replies
View Related
May 25, 2000
Is there any way to change the 'type' of a stored procedure from 'user' to 'system'?
View 1 Replies
View Related
Sep 7, 2006
Hi all,
I am trying to figure out a way to analyze a stored procedure to deduce its output type.
A stored procedure can return values throught one of the following:
1) Using the Return keyword
2) Returning a recordset
3) Throught its Output parameters
4) A combination of 1, 2 or 3
Using the Information_Schema, you can access the SQL code of the stored procedure from, say, VB.Net. From there, I want to know what output type the stored procedure has.
A) for 1), I guess I can parse the code for the 'Return' keyword, but that wouldn't be efficient, for the 'Return' word could be inserted into string values...
B) for 2), it would be difficult to analyze the stored procedure's code to know FOR SURE whether a recordset is returned. You just can't parse for SELECT keywords in complex code...
C) 3) should be easy enough, getting the return parameters types from the Information_Schema.
So, is there an easy way that I missed for achieving this, some object in the .Net Framework that I could use to analyze SQL queries perhaps, or am I doomed to do it the hard way?
Thanks,
-Etienne
View 8 Replies
View Related
May 23, 2006
Hi All !
How i can create a stored procedure like ISNULL ?
I need to a procedure that accepts Int type parameters and Float type ect.
Thanks. DBT.
View 5 Replies
View Related
Feb 29, 2008
All-
Is there a way that I can embedd a call to a stored procedure into an existing INSERT section in a table adapter?
Say my objective is to call a stored procedure called personfill automatically RIGHT AFTER the TableAdapter inserts a row into the person table. One catch is that the stored procedure must be sent the value of unique identifier field person_id, which was created for the new person record automatically by the db. (If this is not possible to do, I might try using a TRIGGER in the person table.)
Below is the INSERT code of the TableAdapter. My guess is that if I could call a procedure, I would want to put the call between lines 12 and 13.
Your comments would be most appreciated!!!
-Kurt1 <InsertCommand>
2 <DbCommand CommandType="Text" ModifiedByUser="false">
3 <CommandText>INSERT INTO [person] ([family_id], [circle_id], [person_type_id], [last], [first], [username], [password]) VALUES (@family_id, @circle_id, @person_type_id, @last, @first, @username, @password)</CommandText>
4 <Parameters>
5 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@family_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="family_id" SourceColumnNullMapping="false" SourceVersion="Current" />
6 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@circle_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="circle_id" SourceColumnNullMapping="false" SourceVersion="Current" />
7 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@person_type_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="person_type_id" SourceColumnNullMapping="false" SourceVersion="Current" />
8 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@last" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="last" SourceColumnNullMapping="false" SourceVersion="Current" />
9 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@first" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="first" SourceColumnNullMapping="false" SourceVersion="Current" />
10 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@username" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="username" SourceColumnNullMapping="false" SourceVersion="Current" />
11 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@password" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="password" SourceColumnNullMapping="false" SourceVersion="Current" />
12 </Parameters>
13 </DbCommand>
14 </InsertCommand>
15 <SelectCommand>
16 <DbCommand CommandType="Text" ModifiedByUser="true">
17
View 2 Replies
View Related
Oct 7, 2004
I have a process that is running on the os. This process is picking up FTP files every 5 min, it renames them so not to confuse them with the new files, copies all renamed files into one file to be used by bulk insert, runs the bulk insert to populate a table, and then runs the stored procedure that scrubbing the data and insert it into another table. For every transaction that I do in my stored procedure, I do the error checking as follows:
IF @@error <> 0
BEGIN
ROLLBACK TRANSACTION
RETURN
If my stored procedure encounters an error, return statement will stop it from running. If this happens, I need to stop the process that is running on the os as well.
Questions:
How can that be accomplished?
How to restart the stored procedure ones the error has been corrected?
Thank you for your help.
View 3 Replies
View Related
Nov 28, 2006
I've a S.P. that need to execute in local PC, how can I execute ?
View 1 Replies
View Related
Mar 1, 2007
We are trying to start a server job running an SSIS package and supply some parameters to the package when we start the job using SMO.
What we have now is this:
string cmdLine = job.JobSteps[0].Command;
cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::RatingId].Value;1";
cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::GroupId].Value;1";
cmdLine += " /SET \Package.Variables[User::period].Value;"" + periodEndDate + """;
job.JobSteps[0].Command = cmdLine;
job.Start();
It appears that when the job is run, the modified command line is not used.
What is needed to supply runtime parameters to a job step when starting the job via SMO?
Thanks,
View 3 Replies
View Related
Dec 19, 2007
When a stored PL/SQL procedure in my Oracle database is called from ASP.NET, is it possible to retrieve the OUT parameter from the PL/SQL procedure? For example, if I have a simple procedure as below to insert a row into the database. Ideally I would like it to return back the parameter named NewId to my ASP.NET server. I'd like to capture this in the VB.NET code. 1 create or replace procedure WriteName(FirstName in varchar2, LastName in varchar2, NewId out pls_integer) is2 3 NameId pls_integer;4 5 begin6 7 select name_seq.nextval into NameId from dual;8 9 insert into all_names(id, first_name, last_name)10 values(NameId, FirstName, LastName);11 12 NewId := NameId;13 14 end WriteName; 1 <asp:SqlDataSource 2 ID="SqlDataSaveName" 3 runat="server" 4 ConnectionString="<%$ ConnectionStrings:ConnectionString %>"5 ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>" 6 SelectCommand="WRITENAME"7 SelectCommandType="StoredProcedure">8 <SelectParameters>9 <asp:ControlParameter ControlID="TextBoxFirstName" Name="FIRSTNAME" PropertyName="Text" Type="String" />10 <asp:ControlParameter ControlID="TextBoxLastName" Name="LASTNAME" PropertyName="text" Type="String" />11 </SelectParameters>12 </asp:SqlDataSource>This is then called in the VB.NET code as below. It is in this section that I would like to capture the PL/SQL OUT parameter NewId returned from Oracle. 1 SqlDataSaveName.Select(DataSourceSelectArguments.Empty) If anybody can help me with the code I need to add to the VB.NET section to capture and then use the returned OUT parameter then I'd be very grateful.
View 2 Replies
View Related
Aug 2, 2006
Hi,
I have a stored procedure a portion of which looks like this:
IF (CAST (@intMyDate AS datetime)) IN (
SELECT DISTINCT SHOW_END_DATE
FROM PayPerView PP
WHERE PP_Pay_Indicator = 'N' )
BEGIN
--ToDo Here
END
where:
@intMyDate is of type int and is of the form 19991013
SHOW_END_DATE is of type datetime and is of the form 13/10/1999
however when I run the procedure in sql query analyzer as:
EXEC sp_mystoredproc param1, param2
i get the error:
Server: Msg 242, Level 16, State 3, Procedure usp_Summary_Incap, Line 106
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
what is the proper way of doing the conversion from int to datetime in stored procedure?
thank you!
cheers,
g11DB
View 11 Replies
View Related
Aug 18, 2006
Im trying to insert a new record into tblMessages...the unique ID generated for MessageID is the value I want to use as a value for the MessageID field when inserting a new record in tblUsersAndMessagesI have the following sp:
-- ================================================
-- Template generated from Template Explorer using:
-- Create Procedure (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- This block of comments will not be included in
-- the definition of the procedure.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE spNewMessage
@UserIDSender nvarchar(256),
@MessageTitle nvarchar(50),
@MessageContent text,
@MessageType int,
@MessageID uniqueidentifier,
@UserID uniqueidentifier
AS
Begin
Set NoCount on
DECLARE @WhateverID uniqueidentifier
INSERT INTO tblMessages(UserIDSender,MessageTitle,MessageContent,MessageType)
VALUES (@UserIDSender,@MessageTitle,@MessageContent,@MessageType)
Select @WhateverID=@@Identity
INSERT INTO tblUsersAndMessages(MessageID,UserID)
VALUES (@WhateverID,@UserID)
End
GO
And here are my tables:tblUsersAndMessages allow nullsMessageID uniqueidentifier falseUserID uniqueidentifier falseNew bit false *default set to ((1))
tblMessages allow nullsMessageID uniqueidentifier false *PK default set to (newid())UserIDSender uniqueidentifier falseMessageTitle nvarchar(50) trueMessageContent text trueSentDateTime datetime false * default set to (getdate())MessageType int false
Now when I try to add my SP I get this error:Msg 206, Level 16, State 2, Procedure spNewMessage, Line 22Operand type clash: numeric is incompatible with uniqueidentifierWhat can this be?!?
View 4 Replies
View Related
Feb 25, 2004
Hi,
I pass a paramter of text data type in sql server (which crosspnds Memo data type n Access) to a stored procedure but the problem is that I do not know the crossponding DataTypeEnum to Text data type in SQL Server.
The exact error message that occurs is:
ADODB.Parameters (0x800A0E7C)
Parameter object is improperly defined. Inconsistent or incomplete information was provided.
The error occurs in the following code line:
.parameters.Append cmd.CreateParameter ("@EMedical", advarwchar, adParamInput)
I need to know what to write instead of advarwchar?
Thanks in advance
View 1 Replies
View Related
Aug 11, 2005
I built a database by using a generated script from the originaldatabase. It built the System Store Procedures as User type. How do Ichange them back to System type?
View 4 Replies
View Related
May 12, 2008
I currently have a stored procedure that is defined as follows:
CREATE PROCEDURE UpdateSyncLog
@TableName char(100),
@LastSyncDateTime datetime,
@ErrorState int OUTPUT
I am using an execute sql task to call this procedure. The connectiontype is ADO .NET and the SQLSourceType is DirectInput. The IsQueryStoredProcedure setting is false, and the following is my SQL Statement I have entered:
exec UpdateSyncLog 'myTestTable', @LastSyncDateTime, @ErrorState
Result set is set to None, as this query returns NO results (i.e. has no select statements in it that returns results).
I have two variables in this SSIS package. CurrentDateTime, and ErrorStateVal. CurrentDateTime is of Data type DateTime, the ErrorStateVal is of type Int32
The parameter mappings are as follows:
Varialbe Name=User::CurrentDateTime, Direction=Input, DateType=DateTime, Parameter Name=@LastSynDateTime, Parameter Size=-1
Variable Name=User::ErrorStateVal, Direction=Output, DateType=Int32, Parameter Name=@ErrorState, Parameter Size=-1
The error I am getting when running this execute sql task is as follows:
Error: 0xC001F009 at AS400 to SQL Full Repopulation Sync: The type of the value being assigned to variable "User::ErrorStateVal" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec UpdateSyncLog 'myTestTable', @LastSyncDateTime, @ErrorState" failed with the following error: "The type of the value being assigned to variable "User::ErrorStateVal" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
This makes no sense to me, both the SSIS variable ErrorStateVal is Int32, as well as the parameter declaration in the Execute SQL task is Int32 with direction of OUTPUT, and my stored procedure definition has @ErrorState as an integer as well.
What gives?
View 2 Replies
View Related
Jul 31, 2006
HI Experts...
I am using SQL SERVER 2005 standard edition
I have encountered a problem regarding converting date data type in stored procedure
As i was having problem taking date as input parameter in my stored procedure, so, then I changed to varchar (16) i.e.
CREATE PROCEDURE sp_CalendarCreate
@StDate VARCHAR(16) ,
@EDate VARCHAR(16),
then I am converting varchar to date with following code
DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME
SELECT @STARTDATE = CAST(@STDATE AS DATETIME)
SELECT @ENDDATE = CAST(@EDATE AS DATETIME)
When I try to execute the procedure with following code
execute sp_CalendarCreate @stdate='12-1-06',@edate='20-1-06'
but it gives me following error
Msg 242, Level 16, State 3, Procedure sp_CalendarCreate, Line 45
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Can any one tell me the solution of that problem (at ur earliest)
regards,
Anas
View 5 Replies
View Related
Apr 10, 2007
I have no problem getting OLE DB Command transformations to support single returns by a procedure.
For example, exec name_of_procedure ?,?,? OUTPUT
However, I have a stored procedure which accepts 1 input and returns 5 outputs. This procedure works fine at the command line but when I try to incorporate it into a OLE DB Command I don't get the multiple values returned. There's no problem at all configuring the transform as it recognizes all input and output parameters. For some reason I just don't get values returned.
thanks
John
View 14 Replies
View Related
Jul 14, 2006
Hi, I have a script written in ASP to load data file (.csv) to ms sql. In the script, I have a portion of script looks like taht :
.....
Do While NOT oInFile.AtEndOfStream oOutFile.WriteLine Replace(oInFile.Readline, chr(13), vbcrlf)Loop
.....
After that, I will use a BULK INSERT to input data to ms sql.
I am wondering how do I convert each row (data) to vbcrlf in Stored Procedure? Coz' I did not compose the convertion part, and I got no error when running BULK INSERT, but no rows are inserted :( HELP!!!!
I guess it's because the file is not being converted into a correct format??
View 1 Replies
View Related
Dec 5, 2007
Hi,
Does anyone know how to deal with image data type within stored procedure when using SQL2000?
I have a table and there is an image data type column. In this table I need to make a copy of one row within a table through a SP /it means to retrieve the whole row within SP, change another columns data (but, that the image is not modified) / and save the modified row back to the same table.
Problem is, that within SP is not alowed to use local varaibles of image data type. Does anyone know a solution for this? Please.
Thank you.
View 1 Replies
View Related
Aug 6, 2004
Hi i am trying to get the following result:
CALCULATE THE CURRENT NUMBER OF SHARES on base of number of shares bought and number of shares sold
so the logic is
int total
if transactiontype is "buy", total = total + amount bought
if transactiontype is sell, total = total-amount sold
plus must be grouped by share
base data are stored in 1 table as
share name transaction type share amount
tesco buy 200
tesco sell 50
sounds rather easy does it not?
well sql syntax must be very foreign to me as i do not manage it
I tried a few options:
1 to write a database function as above and then call it from sproc
but i need to use group by share name or id so it calculates for each share and it will not let me to use function in select with group by
2 i tried to use if within sproc but i get complain incorrect syntax (I use MSDE database accessed via Visual) - I think it suppose to be possible but it throws me out with the most simple if or = is there some special syntax?
3 I created 2 views: 1 view: all sold shares, 2nd view: all bought shares and their bought/sold quantities
as in
select share name, sum(sharequantity)
where transaction = sell
from table
group by share name
and the same for purchases
then I did union of these 2 views with boughtquantity - soldquantity what worked but it only showed me shares which were sold, if share was never sold it was not shown I guess due to union
so I am still stuck!
View 7 Replies
View Related
