In this article http://download.microsoft.com/download/f/1/0/f10c4f60-630e-4153-bd53-c3010e4c513b/ReadmeSQLEXP2005.htm , it explains that you must fully enable the security settings to allow use of transaction processing for a SqlExpress database. Is there a way to set these option in a setup? Or is there another way to use transaction processing without setting these options?
Thanks
Dave T
I am trying to do something simple to test TransactionOption. I have a ScriptTask (out of the box), which runs fine. To test TransactionOption, I set the Package Properties TransactionOption = Required. Straight away the package fails with the following message
Error: The SSIS Runtime has failed to start the distributed transaction due to error 0x8004D01B "The Transaction Manager is not available.". The DTC transaction failed to start. This could occur because the MSDTC Service is not running.
I am running this on my Laoptop, which has XP Pro with SP2.
I checked the services and MSDTC and it is running fine. I have checked the Event Viewer and saw the following messages... One is Information and the other is Error
Information (Disk - Event ID 2444)
----------------------------------------------
MSDTC started with the following settings:
Security Configuration (OFF = 0 and ON = 1):
Network Administration of Transactions = 0,
Network Clients = 0,
Inbound Distributed Transactions using Native MSDTC Protocol = 1,
Outbound Distributed Transactions using Native MSDTC Protocol = 1,
Transaction Internet Protocol (TIP) = 0,
XA Transactions = 0
Error (Devices - Event ID 4437)
------------------------------------------------
The account that the MS DTC service is running under is invalid. This can happen if the service account information has been changed using the Services snap-in in Microsoft Management Console (MMC). MS DTC service will continue to start. Please make sure that the MS DTC service account information is updated using the Component Services Explorer.
I have checked Component Services. All looks fine from what I can see.
Anyone else came across this?
Thanks
Sutha
Server 1: Win2003, Clustered Environment, SQL 2005sp2
Server 2: Win2003, no cluster, SQL 2000sp3a
Server 3 (aka, client): Win2003, using ODBC (sql native client) to connect to server 1
I'm attempting to run an SQR that connects to server 1, yet updates server 2. Right now, all I'm doing is the statement
delete from <server2>.<database>.dbo.table
and am getting the error (DUL41 is server 2):
SQR 5528) ODBC SQL dbexec: SQLExecute error 7412 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider "SQLNCLI" for linked server "DUL41" returned message "No transaction is active.".
(SQR 5528) ODBC SQL dbexec: SQLExecute error 7391 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "DUL41" was unable to begin a distributed transaction.
If I use query analyzer (or whatever we're calling it now) to connect to server 1 and run the statement, it works fine. But, SQR is connecting via ODBC (that's different) and also is SQR.
I'm also not 100% sure all of the new MSDTC aspects are configured correctly, but I've gone through the settings a few times. Right now, I pretty much have everything set about as open as possible (these are test servers on the same network) and am still getting the error.
Any help, or ideas I could try, would be great. Thanks.
I get the following error in the SQL ErrorLog file and in the Event Viewer when using a J2EE web application deployed on BEA WLS 8.1sp5 using the Weblogic JDBC Type4 XA driver with MSSQL Server 2000 SP4
Enlist of MSDTC transaction failed: XACT_E_NOTRANSACTION.
I have a sql job which has to pull some data from a remote server. This job is running fine last few days and suddenly failing to execute with the following error. The same job is running fine in other servers.
Executed as user: NT AUTHORITYNETWORK SERVICE. The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction. [SQLSTATE 42000] (Error 1206). The step failed.
Note: The steps I have already done :
1. Verified the MSDTC configurations and restarted the MS DTC
2. Restarted the Sql Server
3. Restarted the machine.
Any help will be highly appreciated.
Hi
I am trying to install SQL server 7 on XP. I did not install any prerequisite such as service pack 4. During the installation process, I received a error message that says:
'Setup fail to configure the server. Refer to server errorlog and cnfigsvr.out for more information. '
In Errorlog file, the last part of it says:
.
.
.
SQL server's unicode collation is:
'English' (ID =1033) Comparison style =196609
SQL server's non-unicode sort order is:
'no case_iso'(ID=52)
SQL servers non-Unicode character setn is 'iso_1(ID=1)
Warning:
Override, autoexec procedures skipped.
Closing file c:MSSQL7DATAmodel.mdf
Closing file c:mssql7datamodelling.ldf
SQL server is terminating due to 'stop' request from service Control Manager.
In cnfgsvr.out
.
.
.
[Microsoft][ODBC SQL Server Driver][SQL Server] Successfully attached database 'Northwind'
Disconnecting from Server...
Stopping Server ......
Starting Server ......
An error occured while attempting to start the service (1460)
SQL server configuration failed.
Please, help me on how to complete the installation.
Or
Is it because of the service pack 4 that I didn't install that is causing the problem.
Re: SQL Server 2000 Developer Edition
Error message: Setup failed to configure the server
I'm attempting to install SQL Server 2000 Developer Edition on a 2nd workstation in our area for development and practice with having this 2nd workstation as a "local" (test) SQL Server box. The install fails with the above mentioned message. (We have a database running in production on SQL Server 2000 and we need a place to simply copy the database and run tests on it)
The target PC is running WInXP Pro-SP3 and has IIS installed, along with Visual Studio 2005 & .Net framework, etc.
I downloaded it (via MSDN license) and accepted the defaults on the install.
Any feedback is appreciated.
Thanks,
RLN
Hi All, I am using the CSLA framework for the data access with SQL Server 2005 and we are not using distributed transaction. When we are using this architecture for our local machine it is working fine and our DB is in local machine itself.
But I am getting the following error in our development server and our DB is in the Network. " DataPortal.Fetch failed
(DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for
network access in the security configuration for MSDTC using the Component
Services Administrative tool.))) ---> DataPortal_Fetch method call failed
---> DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDT... Procedure Script call failed." Please help me out to get rid of it. Your help would be appreciated.
RegardsGomaz
Distributed transactions were happily running between our SQL servers and then we installed Windows 2003 Server SP2 and all of a sudden we got this nice error message when attempting a remote data update via linked servers. I couldn't even run "BEGIN DISTRIBUTED TRANSACTION" without getting the error message. The full error message is:
"Enlist operation failed: 0x8004d00e(XACT_E_NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MSDTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager."
Apparently, SP2 disables network DTC access (how nice, I feel more secure knowing that my data can't be updated remotely anymore).
Solution:
From Control Panel | Add or Remove Programs | Add Remove Windows Components
Select "Application Server" and click the "Details" button
Check "Enable network DTC access" and click OK for however many prompts it takes to apply the changes.
****NOTE**** this change WILL SHUT DOWN SQL SERVER so plan accordingly (this would have been handy to know in advance since I ran it in the middle of the workday and everyone got disconnected).
Hope this helps!
Hi,
I have installed SQL Reporting Service on one server. Using the config tool, I am trying to setup the Reporting Database on a seperate SQL instance. This SQL instance is running on a Clustered SQL 2005 server.
The creation of the Database is sucessful. However when I give the Windows credentials to connect to this database on the same page, I always fail at the following task : Setting Connection Info for Reporting Server. The error message is :
"System.Runtime.InteropServices.COMException (0x800706B3)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.Get()
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetDatabaseConnection(String server, String database, ConfigurationCredentialsType credsType, String userName, String password)"
The Windows Account I am using has Full SQL Rights to the Clustered SQL Server. I have seen other posts on the forums about the 0x800706B3 error, but most of them are related to a problem with RPC.
The Reporting Services account is runing under 'Network Services'. I am not sure if this is causing the problem?
Thoughts anybody?
Thanks,
Mahmood
Hello
I have server "123456" SQL 2005 On clustered environment. I added permissions to snapshot folder, it is on sharing for both nodes.
I got error during the set up as:
Microsoft.SqlServer.ConnectionInfo
Additional Information:
An exception occurred while executing a TSQL or Batch(
Microsoft.SqlServer.ConnectionInfo)
An error occurred during the execution of xp_cmdshell. A call to "Create Process" failed with error code 5
Destination path d:Microsoft SQL ServerMSSQL.1MSSQLData is not Valid. Unable to list directory contents. Specify a valid destination path
Changed database context to 'master' (Microsoft SQL Server, Error 15121)
The datafolder exists, sql cluster service account from domain added in to snapshot folder, administrators access also on this folder.
Please advice how to troubleshoot this issues. Thanks, Jay
I have written data handling routines that use transaction processing to ensure no records are written needlesly if errors occur later. I have had no problems writing the code and handling the rollbacks and commits.
My problem occurs when the code crashes without falling into my exception handling routines. Null pointer errors and the like. I am using OLEDB interface to handle my data access as i need the web app to instantly swap between sql databases without re-writing code depending on what database my customers want to use i.e. MSSQL or Oracle (No Problems here using OLDDB and ASNI 92 SQL statements).
What i think is happenening is that when it crashes MSSQL is still holding the transaction but because it crashes i can niether get a commit or a rollback command on the transaction so when i run the code again and create a new transaction it returns time out on on the first insert statement?
Could anyone give me any pointers here please? As I can no longer insert any records using transactions.
Hello,
I am fairly new to SQL Server 2005 and was curious if this was possible.
In my VB applications I always used Begin Transaction, Commit and Rollback to process records. I just found out that I can perform the same functionality in a stored procedure.
So the question is, if I have an order record and four line item records is there anyway to pass all that to the stored procedure as a unit. I can pass the order record as individual parameters but it is the four (or however many) detail records that is the reason for my question. How can I pass the detail records at one time? Can I pass these as an array or a dataset or something else or am I just out of luck? SQL Server 2005 has impressed me a few times already with what you can do and I am really hoping this can be accomplished also.
Cheers,
Richard
I am trying to configure distributed transaction and XA support using Microsoft SQL Server 2005 JDBC Driver. I have coppied SQLJDBC_XA.dll from XA directory and placed in my sql server binn directory and trying to run the script xa_install.sql from binn directory with command as below :
C:Program FilesMicrosoft SQL Server80ToolsBinn>
osql -U sa -n -P admin -S localhost -i C:JavaLibrariesMS SQL Driversqljdbc_1.2enuxa xa_install.sql
But I am getting error saying :
[DBNETLIB]SQL Server does not exist or access denied.
[DBNETLIB]ConnectionOpen (Connect()).
when I replaced local host with the machine name it gives error :
[Shared Memory]SQL Server does not exist or access denied.
[Shared Memory]ConnectionOpen (Connect()).
where in I am able to test connection from Websphere using the same connection.
Please help some one ....... I am in URGENT need.... I need to enable XA suport for my application to run........
Thanks ----
I have searched and could not find an answer for this one I read log and it said
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
SQL Server configuration failed.
how do I fix this?
I have a setup of transaction replication between one publisher and subscriber in the Same server.Now, I need to add a new subscriber to the existing publisher. So publisher database name is DB_A and Subscriber 1 name is DB_B. So the new subscriber will be DB_C. Is this kind of setup possible on one server?
If yes then at the time of reinitialization is it going to apply the snapshot on DB_B as well as DB_C?Also let say if due to disk error DB_B gets corrupted then will data be still replicated between DB_A and DB_C? (Assuming publisher, subscriber 1 and 2 are sitting on individual disks).
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
Is it true that you only have one instance of MSDTC on an active/active Cluster SQL configuration?
All the installations I have seen so far will only allow the MSDTC resource to be under on resource group (usually one of the SQL groups...
Can you all that have worked with cluster respond.
Trying to locate information on MSDTC. Is this "needed" to run SQL Server? That is, if this part of the installation is deleted, will SQL Server still function? Also, does anyone know if this is a crucial tool needed by Veritas Volume Manager or Windows Disk Manager?
If anyone knows of a link to this information, I'd appreciate it. My searches come up with lots on information on MSDTC, but nothing that answers my specific questions.
Thanks for your time.
When i do a BEGIN TRAN to a SQL server sitting on Windows 2003 Server from a SQL Server Sitting on Windows 2000 Server,
the Transaction hangs and if I try o kill it the Transaction is in ROLLBACK State.
I tried setting the Properties for the MSDTC and restarted the Windows 2003 Server but in vain
It still hangs
Did any one come across this problem?
Thx
I keep getting this error on my application server...what does it mean?The description for Event ID ( 0 ) in Source ( ODBC ) cannot be found.The local computer may not have the necessary registry information ormessage DLL files to display messages from a remote computer. Thefollowing information is part of the event: Failed to enlist in DTC:SQL state 37000, native error 8501, error message [Microsoft][ODBC SQLServer Driver][SQL Server]MSDTC on server 'PROSQL' is unavailable..any help would be appreciated...thanks-Jim
View 1 Replies View RelatedI'm using msde. On the little icon in task tray, you have under currentservice, a choice of mssqlserver, and another choice is msdtc. What ismsdtc? And what is sqlserver agent?
View 1 Replies View RelatedThe resource msdtc is down. Every time, it works pretty well , after we restart the servers(node1 and node2). But, about half a hour later, the problem is there. We reintalled msdtc. It didn't work out too. msdtc and sql server is on a cluster. Can anyone help me out?
View 1 Replies View RelatedHi,
I am running SQl 7.0 (SP4) on Windows XP Professional (SP2). Whenever I try an insert/update type of activity, the System returns the following message :
Server: Msg 8501, Level 16, State 3, Line 2
MSDTC on server 'SERVER' is unavailable.
However, all the required services including MSDTC are running on the System.
Please help ASAP.
Thanks & Regards - Rajesh Pathak
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI have a class that use a TransactionScope object for make make two operations into a database. The problem is that in a computer works well but in another I receive a error message: "MSDTC is not running in .SQLEXPRESS". I had watched the services in the computer and the "Microsoft Distributed Transaction Coordinator" is running.
Does somebody know what is happening?
Thankyou and sorry for my English.
I am selectively insert data from serverA databaseX to serverB databaseX.
(serverA is linked server on B.)
I could insert parent and child tables. But get error when insert to grand-child tables:
Server: Msg 8501, Level 16, State 3, Line1
MSDTC on server B is unavailable.
Don't think I need to turn on MSDTC on B. But I could copy and paste from source A server to target B server. Confusing on some table could insert while others with error....
thanks
-D
I have an ugent situation. Due to a failure we had to build a new db server for an application and this was done succuessfully. The application requires DTC and it was not intalled when we install SQL on the server.
How do I install DTC? Did I miss an obscure option during SQL install?
Sidney Ives
Database Administrator
Sentara Healthcare