How To Connect To SQL Server 2000 And SQL Server 2005 In One Computer????
Dec 8, 2007
Hi All!!!
In my Computer has MS SQL Server 2000(with default Instance) and now I Install MS SQL server 2005(with Instance name: SQL2005 ). Now I want to write Web Application to connect to the both databases (SQL Server 2000 and MS SQL Server 2005), How to Add connection string in my web.config to do it.
Help me ???
Thanks & Regards,
View 3 Replies
ADVERTISEMENT
May 28, 2006
Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
View 1 Replies
View Related
Dec 27, 2007
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
View 1 Replies
View Related
Nov 4, 2005
Does anyone know whether or not both versions can be installed on the same machine?
View 1 Replies
View Related
Oct 11, 2006
I now know only I can install both .Net 1.1 and 2.0 on one computerbut I don't know, Can I do it on SQL Server ? Please advise me....
View 8 Replies
View Related
Jan 18, 2006
Hello,
Sorry for my question, I know, that there were several topics about sql 2000 vs SQL 2005, I read all them but unfortunately I haven't got the correct answer. I must install my intranet application that uses asp.net 2.0 and SQL 2005 Express to a Windows 2003 server with SQL 2000. It is possible to install SQL 2005 Express beside the 2000 server? It is very important, because I have no possibility to test and that Win2003 server there are a few programs that use SQL 2000. What will happen with the 2000 databases and their programs if I install the 2005 Express to the server? They will work fine with 2000 and my application will work with 2005?
Or instead it should I configure my application to use 2000 capable connentionstrings?
View 3 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Mar 14, 2006
I'm new to programing things, i'm on my own with MCAD/MCSD Amid Calani, i came to the point were i can"t go any further: i have VS enteprise architect,but i have only instece of SQL server,recently i downloaded SQLExpress , what should i do to connect SQL server to my computer, just because i'm new to to it looks stupid but maybe someone can HELP me with this. HELP, HEL,SOS,SOS...:eek:
View 14 Replies
View Related
Apr 3, 2007
Hi all.I am working on asp.net 2.0 with back end as sqlserver 2000. but when trying to connect to the database i am getting the following error displayed An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +1093 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +351 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122 System.Data.SqlClient.SqlConnection.Open() +229 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +114 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +225 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +157 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +68 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +100 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +100 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +113 System.Web.UI.WebControls.Login.AttemptLogin() +178 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +134 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +178 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3837
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42 can anyone help??????????? regardspravallika
View 12 Replies
View Related
May 11, 2007
i Update SQL Server 2005 SP1 to SQL Server 2005 SP2 but cannot connect SQL Server 2000 SP4. Please Help Me Please
===================================
Cannot connect to sia09-cxdb01cxdb01.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
Error Number: -1
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
View 3 Replies
View Related
Jun 21, 2006
Please bare with me as I do not have much knowledge in this area with MSSQL.
I have installed MSSQL 2000 Developer and I have setup a database which I am able to connect to and work fine with from the actual server MSSQL is installed on.
The problem comes in when i try to connect to that same database from a different remote server. It will not connect to the DB from this remote server but I know all the connection information is correct so its something on the MSSQL DB server causing this and not on this remote server.
Someone I know has had this problem and has fixed it but they wont tell me how. All I know is they said something about manually opening the ports on the MSSQL server and he also said when you set it to dynamicly determine the port that MSSQL is listening on it errored out. however if you set it staticly to 1433 it worked fine.
Ive also installed SP4 in attempt to fix this but no luck with that either. And I can also get the same exact remote server to connect to completely different DB server without issues.
If anyone can please help walk me through this I would be greatly appreciate and I am also willing to pay some money if it will make my life easier.
View 6 Replies
View Related
Aug 11, 2006
Hello all,
New forum member here, and pretty new to SQL Server. My question is I'm having an impossible time trying to connect MS Access on Computer A to a database running on SQL Server 2k (SP3) on Computer B. Every time I try to create a new ODBC connection on Computer A, I get the dreaded Server Error 17 (SQL Server does not exist or access denied). I have no problems making the ODBC connection on the computer running SQL Server (Computer B).
My connection settings are as follows:
Computer A name = MAINDESKTOP
Computer B name (contains SQL Server) = HOMELAPTOP
Workgroup name = WORKGROUP
Server Properties:
Name = HOMELAPTOP
Authentication = SQL Server and Windows
Registered SQL Server Properties = Use SQL Server authentication, and I'm using a login name and password
Server Network Utility = TCP/IP network protocol enabled, with default port 1433
Server Client Network Utility = TCP/IP network, default port 1433
Under "Security", I have created a new login using SQL Server Authentication called "bradley", and have assigned a password to the new login. I've noticed that when I open the login properties dialogue, there are always more ***'s in the password field than the number of characters I originally used, but I suspect that's normal. I have assigned a database called "Costume" to "bradley", and have verified that the permission is checked on the Database Access tab for user "bradley".
Under "DatabasesCostume", I have verified that there is a user called "bradley" with the same login name and user name.
No matter what I try, I can't get Computer A to connect to Computer B's SQL Server database. I have no problems with any other types of connections (pinging, internet, file transfers).
This can't be that difficult! Any ideas?
Thank you!
Brad
View 6 Replies
View Related
Oct 19, 2007
I am using VS .net 2005 to develop a web application with sql server 2000, but the SQL servrer 2000 is setup on other computer,so, my web server is setup on A machine and SQL servr is setup on B machine.I got a problem when i try to connect to SQL server through the Web form as following error."An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
I had try to setup the MDAC 2.8 on my Web Server, but i got a setup error sth like "MDAC 2.8 cannot install on your machine because it is not support your windows version.........."
Why i can't connect to SQL 2000 through the Web server???
It is a urgent case, Please help thx a lot.
View 3 Replies
View Related
Dec 29, 2006
Interesting issue.. I think
I have 2 linked servers on my dev 2005 instance (sp1-win 2003). My 2005 instance shares the physical server with a 2000 instance. This linked server works fine. The second linked server is on a separate server running sql 2000 sp3. I cannot connect to this server at all. I can connect the other way -- from the 2000 to the 2005. I have tried all kinds of combinations of security and options but nothing works. The only resolutions I have found referenced installing Management Studio on the 2000 server or creating an ODBC connection from the 2005 instance. Any ideas???
Here is the error I get:
OLE DB provider "SQLNCLI" for linked server "ALLFLDB6" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "ALLFLDB6" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
Msg 10061, Level 16, State 1, Line 0
TCP Provider: No connection could be made because the target machine actively refused it.
View 4 Replies
View Related
Oct 12, 2007
Hi,Can I use SQL 2005 Management studio to connect to SQL 2000 server?
View 1 Replies
View Related
Sep 6, 2006
I recently upgraded from SQL Server 2000 to SQL Server 2005. I have Oracle databases I need to share data with. I was using the Heterogeneous Services (hsodbc) from Oracle and connected to SS 2000 fine. Since I've upgraded, I can't use hsodbc to connect to my SS 2005 database. I get the following error:
ORACLE GENERIC GATEWAY Log File Started at 2006-09-06T09:40:07
hoainit (3): ; hoainit Exited with retcode = 0.
hoalgon (7): ; hoalgon Entered. name = edw.
DB_ODBC_INTERFACE (2085): ; [Microsoft][SQL Native Client][SQL Server]Login
failed for user 'edw'. (SQL State: 28000; SQL Code: 18456)
DRV_InitTdp: DB_ODBC_INTERFACE (2085): ; [Microsoft][SQL Native Client][SQL
Server]Login failed for user 'edw'. (SQL State: 28000; SQL Code: 18456)
nvRETURN (F:WorkConnect_4_6_3srcdrvDRV_BIND.C 356): -2220
nvRETURN (F:WorkConnect_4_6_3srcavNAV_BIND.C 293): -2220
hoalgon (7): ; hoalgon Exited with retcode = 28500.
View 6 Replies
View Related
Jan 1, 2008
dear all,
in order to install a program i need to connect through SQL 2000 client to SQLserver2005.
it is possible?
View 8 Replies
View Related
Apr 3, 2008
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
View 4 Replies
View Related
May 7, 2008
i am having some issues..hopefully someone can help me..i just finished my database class...we had to install sql server 2005...i am running windows xp home...when i went to install sql...there was one error that i was getting...it was about the iis function, which i know that it won't work with the home edition...i finished the install, without the iis, so i can try to work on some things for class...i also had to install northwinds and pubs...now that the class is over, i want to get rid of it all...i tried to follow somewhat of the uninstall process but now i am getting problems...i can't figure out how to uninstall the northwinds and pubs..it keeps saying that it is being used by another person or program and it won't let me uninstall....can someone what me through the uninstall process of both the northwinds, pubs, and all of sql server 2005...i don't know much about computers....thanks you so much for helping in advanced...
crystal
View 4 Replies
View Related
Feb 9, 2007
Will SQL Server 2005 developer edition and Visual Web Developer Express
work on the same machine? One reviewer of SQL Server 2005 developer
edition on amazon.com stated won't work on the same machine? Is this
true?
View 6 Replies
View Related
Feb 15, 2007
I am unable to connect to a remote server on Computer A from Computer B, but when I reverse it I am able to connect to a remote server on computer B from computer A. I have SQL Server 2005 Developer Edition on both computers. I am using the using the SQL Management Studio to connect. Both Computers have these settings
Using Surface Area Configuration both have local and remote connections checked. Both computers using tcp/ip only checked.
Using Configuration Manager both the sql server and the sql browser are running. Both computers have tcp/ip protocols enabled.
Under the server properties on both computers, under the Security Tab, I have SQL Server and Windows Authentication Mode checked. Under the Connections tab I have Allow remote connections on this server checked.
I believe I have the Security for both the server and databases done properly giving them both proper Logins and User Roles with the proper permission.
Also went to my window firewall settings and under the Exceptions tab, I added both the sql server.exe and sql browser.exe programs on both computers on my remote network.
But when I connect on Computer B, I get an error message stating:
TITLE: Connect to Server
------------------------------
Cannot connect to 'ServerName'
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
BUTTONS:
OK
----------------------------
I tried pinging server a and then server b and they both pinged.
Could someone please tell me what could be wrong on my remote computers.
View 6 Replies
View Related
Apr 14, 2008
I have SQL server 2005 on a Windows 2003 machine. The machine is old and I need to move the entire SQL server to a new machine. There are many databases and users that need to move across to the new server. Detaching and attaching the databases would be tedious due to the large number of databases. Is there a way of moving the DB's and SQL users to the new machine without having to do each db one at a time?
Additional info that might be helpful:
The new server's IP address and name must also change to that of the old server.
The old server initially had SQL 2000 on it and was upgraded to SQL 2005.
The new server was installed with SQL 2005 only. Hence the Database and log paths differ between the old and new server.
Any help would be appreciated.
View 5 Replies
View Related
Aug 30, 2007
I have installed SQL server 2005 and after I uninstalled it. and tried to install again but my computer recognize the old version of Sql Server 2005 and only allow to install documentation and client components
How to unintall Sql server 2005 complete from my computer ?
View 3 Replies
View Related
Mar 6, 2007
The prerequire componets for my program are:
1.sql server 2005 engine
2.sql server 2005 reporting services
3.sql server 2005 analysis services
4.sql server 2005 integreted services.
so how can i detect wheter the destination computer has installed the above components or not?
View 1 Replies
View Related
Nov 25, 2006
Hi,I need to know the way in which I can copy my sql server 2005 database from one computer to another ?
Please I need a clear and complete explanation ,thanx .
View 2 Replies
View Related
Mar 8, 2007
I am working with one other person on a VS 2005 vb.net web project that accesses SQL Server 2005. Both the computers are connected and my partner can run the application on his computer from his VS 2005 but we are getting an error on our first databind to a gridview on the page we are trying to run the error is below
A connection was successfully established with theserver, but then an error occurred during thepre-login handshake. When connecting to SQL Server2005, this failure may be caused by the fact thatunder the default settings SQL Server does not allowremote connections. (provider: Named Pipes Provider,error: 0 - No process is on the other end of the pipe.)
I check the properties of the SQL Server and the check box is checked that says allow remote access. I am not sure what to do.
View 1 Replies
View Related
Feb 6, 2008
Hi,
I'have this error during install of Microsoft SQL Server 2005 Express Edition (x86). I'm Using Windows XP Professional with SP2 Build 2600. Does anyone knows how to solve this?
****
Microsoft SQL Server 2005 Setup was unable to install on your computer.
EventType : sql90setup P1 : unknown P2 : 0x659 P3 : unknown
P4 : 0x659 P5 : unknown P6 : unknown P7 : msxml6.msi@6.10.1129.0
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab
View 2 Replies
View Related
Jul 20, 2005
Anyone encounter differences between SQL2K EE and SQL2K Dev Editon?FAILS-----Machine_A [App Server] <-- JDBC --> Machine_ASQL2K_Dev_Ed..dbError: "com.inet.tds.SQLException: Connection refused"When app server on Machine_A attempts to connect to database onMachine_A the conenction is refused.SUCCEEDS---------Machine_A [App Server] <-- JDBC --> Machine_BSQL2K_EE..dbWhen app server on Machine_A attempts to connect to database onMachine_B the conenction succeeds and the app server runs normally.JDBC driver: com.inet.tds.TdsDriverjdbc:inetdae7:locahost:1433I don't believe the app server is exhausting the 10-connection max onSQL2K developer edition (there is a 10-connection limit imposed on thedeveloper edition, correct?)LB
View 2 Replies
View Related
Oct 12, 2006
Hello allMy computer was installed with SQL Server 2005 Developer version, however, I checked the Default Web Site in Internet Information Service console and saw that the ASP.NET configuration was not correct as below."data source=.SQLEXPRESS;Integrated Security=SSPI; AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"I have a question that can I replace the string, “.SQLEXPRESS”, with my server name and my SQL Server 2005 Developer named instance as below“DEVSERSQL2005Dev”?Thanks in advance for your help.
View 3 Replies
View Related
Mar 18, 2008
I have a very basic console application whose sole purpose is to query a database on the same local computer. When i run the application, i get the error message below:
Cannot open user default database. Login failed.Login failed for user 'someDomainSomeUserName'.
Below is my connection string also
myconnection_string = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=C:Reporting SystemApp_Datasafetydata.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True").
After some googling, some post pointed to deleting a user folder at :
C:Documents and SettingsmyusernameLocal SettingsApplication DataMicrosoftMicrosoft SQL Server DataSQLEXPRESS
but still deleting that folder and restarting the machine doesn't help and i also have remote connections enabled. Help is really needed.
NOTE: The same application runs on a different computer with XP but fails on the Pc with windows server 2003.
View 3 Replies
View Related
Mar 24, 2008
I have a user who is trying to load SQL server 2005 Express on a new Acer laptop computer. The computer has the following:
Windows Vista Home Premium 32 bits
AMD Turion 64 mobile technology CPU
1790 MB of RAM
When the user tries to load SQL server 2005 Express it does not load. The user after the load is getting an €œUnhandled exception has occurred in your application€? when he tries to run the application.
Does anyone know how to fix this problem?
Thank you,
Photomultiplier
View 5 Replies
View Related
Oct 6, 2005
Greetings,
I want to connet to Oracle databse from SQL server 2000 since I am more comfortable with SQL 2000 client package. The oracle server is 8i or above.
I am running a SQL Server 2000 on a PC with Windows XP OS.
Please help what I need to do and configuration information.
Thank you all in advance.
BPG
View 1 Replies
View Related