I want to search an entire table for a particular keyword but i'm not sure how, if the keyword was TEST then I want to return rows where any of the fields contain TEST, THIS IS A TEST, PLEASE TEST THIS etc etc i.e. the keyword can be anywhere in the fields value
I believe I need to use the LIKE clause but i'm not sure how.
Thanks
Ben
Hi everyone,
sorry to b a pest again! Before I made the decision to change the DB used in my app from SQL Server Express to SSCE, I had no problems with constructing a SELECT statement as laid out in the Title.
Basically, I have 2 tables with a one-many relationship between them. In the Parent table, I had a SQL Statement as follows:
SELECT DeptID, DeptName,
(SELECT DISTINCT COUNT(Active) FROM Documents WHERE (Documents.DeptID = Dept.DeptID) AND
(Documents.Active = 'True') AS CountOfActive
FROM Dept
Now in SSCE 3.1, I get an "Unable to parse query" error message when I construct the same SQL statement in my dataset designer.
Any thoughts on how I may solve this?
Much thanx!
Shalan
I need to transmit data from a ##table to an .xls file. The data is exported only for the first time. However, after a while the table will be dropped by SQL Server 2005 automatically.
I'm using Execute SQL Task to check for the existence of an ##Table. And, if does not exists the ##table should be created or something like the example below.
Ex:
IF NOT EXISTS (
SELECT *
FROM ##StateProvince
)
SELECT * INTO ##StateProvince
FROM Person.StateProvince
GO
To keep the session of the ## Table active, but the following error is thrown :
The NOT SQL construct or statement is not supported.
Hi there,
I'm trying to run following script in sql command mode in OLE DB Source and it giving me "The OVER SQL construct or statement is not supported." error msg.
Code Snippet
Drop
Table #Tmp_EXT_AATransactions
Select row_number() over (partition by A3.jrnentry,A32.aaGLDistID order by A32.aaGLDistID,A33.aaTrxDimID ) as rownum,
A33.aaTrxDimID,
A33.aaTrxCodeID,
A3.jrnentry,
A32.aaGLDistID,
G2.TRXDATE,
A3.GLPOSTDT,
A3.aaTRXType,
A31.ACTINDX,
A32.DEBITAMT,
A32.CRDTAMNT,
(A32.DEBITAMT - A32.CRDTAMNT) AS Amount
into #Tmp_EXT_AATransactions
From dbo.AAG30000 A3
Inner Join dbo.AAG30001 A31
On A3.aaGLHdrID = A31.aaGLHdrID
Inner Join dbo.AAG30002 A32
On A31.aaGLHdrID = A32.aaGLHdrID
And A31.aaGLDistID = A32.aaGLDistID
Right Outer Join dbo.AAG30003 A33
On A32.aaGLHdrID = A33.aaGLHdrID
And A32.aaGLDistID = A33.aaGLDistID
And A32.aaGLAssignID = A33.aaGLAssignID
Inner Join dbo.GL20000 G2
On A3.jrnentry = G2.jrnentry
And A31.ACTINDX = G2.ACTINDX
And A31.SEQNUMBR = G2.SEQNUMBR
--Where A3.jrnentry in ( '54227','54222','54225')
Select [JrnEntry],
[aaGLDistId],
[TrxDate],
[GLPostDT],
[aaTrxType],
Isnull([1],0) as Dim1,
Isnull([2],0) as Dim2,
Isnull([3],0) as Dim3,
Isnull([4],0) as Dim4,
Isnull([5],0) as Dim5,
Isnull([6],0) as Dim6,
Isnull([7],0) as Dim7,
Isnull([8],0) as Dim8,
Isnull([9],0) as Dim9,
Isnull([10],0) as Dim10,
[ActIndx],
[DEBITAMT],
[CRDTAMNT],
[Amount]
into #Tmp_EXT_AATransactions_Final
From
(
Select [aaTrxDimID],
[aaTrxCodeID],
[aaGLDistID],
[JrnEntry],
[TrxDate],
[GLPostDT],
[aaTrxType],
[ACTINDX],
[DebitAmt],
[CRDTAMNT],
[Amount],
Row_Number() Over (Partition By [aaTrxDimID],[aaGLDistID],[JrnEntry] Order By [aaTrxDimID],[aaGLDistID],[JrnEntry]) RowId
From #Tmp_EXT_AATransactions
) as Data
Pivot
(
Max([aaTrxCodeID]) For [aaTrxDimID] in ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10])
) As PVT
Select *
From #Tmp_EXT_AATransactions_Final
I can parse and preview it successfully in OLE DB Source Editor but i can't see any columns in columns mapping. So when i click on Build Query in OLE DB Source Editor i get this error message. Also Its working fine in Management Studio so don't know what's the problem.
Regards,
Vivek
I am trying to use a Pivot T-SQL statement in the Table Adapter Configuration Wizard in Visual Studio 2005. I get the error message "The Pivot SQL construct or statement is not supported". Then it executes the SQL statement as if there were no error. Unfortunately, it will not create the table adapter because of the error. Below is the T-SQL statement I am using.
SELECT OrderNumber, OrderDate, custlastname, [1001] AS Dept01, [1002] AS Dept02, [1003] AS Dept03, [1004] AS Dept04, [1005] AS Dept05, [1006] AS Dept06, [1007] AS Dept07, [1008] AS Dept08, [1009] AS Dept09, [1010] AS Dept10, [1011] AS Dept11, [1012] AS Dept12
FROM
(SELECT Orders.Ordernumber, Orders.OrderDate, Customer.custlastname, DeptID, OrderDetail.DetailAmount
FROM OrderDetails od JOIN
Orders ON Orders.OrderNumber = od.OrderNumber JOIN
Customer ON Orders.CustomerID = Customer.CustID
WHERE (DATEPART([Year], OrderDate) = '2006')) p
PIVOT (SUM(OrderDetailAmount) FOR DeptID IN ([1001], [1002], [1003], [1004], [1005], [1006],
[1007], [1008], [1009], [1010], [1011], [1012])) AS pvt
ORDER BY OrderNumber
The statement works fine in Management Studio so I know the syntax is correct.
Any Ideas?
Thanks,
James
Hi All!
Could You comment the next situation:I'm configuring my TableAdapter just like Scott Mitchell does in his tutorialhttp://www.asp.net/learn/data-access/tutorial-70-vb.aspxThe only principal difference is that I need Insert/update and deletemethods to be generated (His aim is only SELECT).I'm also using analytic function (ROW_NUMBER) and I'm also gettinwarning “The OVER SQL construct or statement is not supported.� Yousay then that it could be ignored. But, in this case statements tomodify data (insert/update and delete) aren't being generated, thoughafter warning SQL command is executed without errors.
So, the question is obvious - why does this warning occur and how mustI perform configuration of TableAdapter based on SQL query withanalytic function?
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedHi all,
I had a question regarding SQL construct.
I had a table named "info" and I would like to show Lot_Id as distinct. Besides that , I would also like to show wafer_id and wafer_starttime. May I know how to construct this using select statement?
Thanks
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
My head hurts...it might be an easy one for many people, but cant seem to figure a way to do it.Ok, I have a table with a field called Ad_Price. This field is a nvarchar one, theres many different value in it, all of them corresponding to a price. Now, what I want to do is only get the row that are not written in a good price format (like123$ is wrong, but 123.00 is good, but only value following this exemple)For exemple, if I have all these value145.876785.34654$45 to negociate1bvcaa0.01876.556the value I want to have are:654$45 to negociate1bvcaa876.556because they dont follow the format I wantso im not sure if my explication was clear enough..all in all what I want to complete is the WHERE part of my SQL instruction...what should I put in:SELECT *FROM AdsWHERE ???????thansk for taking the time to read this
View 2 Replies View RelatedI am using the following code to construct an SQL 7.0 View Column
"CASE WHEN [DailyHours] > SUM([TransAmt]) THEN 0 ELSE 1 END"
and it works great!!
However, when I try the same line in SQL 2000, I get the message "The query designer does not support the case SQL construct"
The help screen is no help as all it says is "the syntax you entered is valid but is not supported visually by Query Designer. Be sure the verify your syntax before saving."
It will not let me save, so I'm not sure what to do from here now????
Can you contruct a variable name from another variable? For example, I want the following to PRINT 10
DECLARE @var1 INT
DECLARE @var2 INT
SET @var1 = 10
SET @var2 = 20
PRINT '@var' + '1'
This prints the variable name, not the contents of the var. I tried to parse it with square brackets, but no luck.
Thanks,
Carl
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
Dear Group,
I'm upgrading a "classic" ASP app to ASP.NET 2.0. The database is stored on a SQL Server box in-house. I'm looking to inject a bit of flexibility into the SQLDataSource SelectCommand property.
What I mean is this: depending on a selection a user makes in the form, I'd like to present a GridView object that displays data filtered by the user's selection.
So I took the original long query string from ASP and broke it in two pieces. The first piece contains the bulk of the query and it ends just after the WHERE clause. The second piece is the ORDER BY clause. I'd like to have the ability to inject an additional term at the end of the WHERE clause (using AND). That would be the filter.
For example,SELECT LastName, FirstName, InOut, TimeEntered, PhoneExt
FROM TimeClock
WHERE TimeEntered > '6/17/2008'
AND EmploymentState > ''
ORDER BY LastName, FirstName
So, in between the "AND State > '' " and the ORDER BY clause I'd like to insert something like this:AND Department = 'Production'
I'd like the SelectCommand of the SQLDataSource to look like this:SelectCommand="<%= (sql1 & " AND Department = 'Production' " & sql2) %>"
sql1 and sql2 are defined in a <script runat="server"></script> block in the page <head>. The following errors occur even if I have a single variable containing the whole SQL query string (i.e., SelectCommand="<%= sql1 %>").
When I try to run the page I get this error:Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '<'.
If I remove the quotation marks from around the SelectCommand statement I get:Parser Error Message: Server tags cannot contain <% ... %> constructs.
What's funny about this is that the ConnectionString property of the SQLDataSource looks like this:ConnectionString="<%$ ConnectionStrings:PersonnelDatabaseConnectionString %>"
No complaints from the compiler about the ConnectionString.
Any ideas? Am I simply going to be unable to construct a SelectCommand on-the-fly?
Hi,I have three dropdown lists branch, month & year. Based on these I need to retrieve data in my Datagrid.I have written the following SQL statement & code in my Refreshgrid(): SqlCmd.CommandText = " SELECT * " SqlCmd.CommandText += " FROM HSECData" SqlCmd.CommandText += " where branchno=" &Branchno SqlCmd.CommandText += " And yearno=" &YearNo SqlCmd.CommandText += " And monthno=" &monthNoThis is working fine, initially the datagrid is empty and then displays data when I select say, branch- Melbourne, Year-2005, Month-October and other exisiting combinations.The problem I am stuck at is when the page loads, initially I want all the data to be displayed in datagrid, i.e. for 'All' branches, 'All' years and 'All' months and then when I select combinations of these dropwdown lists as above the data should be filtered and displayed in those selected combinations. but as of now I get and empty datagrid when I select 'All' from these 3 drop down lists or when the page opens the first time.Can someone kindly guide me with the correct SQL cinstruct to achieve both the requirements?Thanks,Aartee.P.S. I am sorry if I have posted this question in a wrong category in the forum, I was unsure whether I should post it in Datagrid category or SQL server category, I thought this was my best bet.My aplogies.
View 1 Replies View RelatedLet say I have 6 tables. I want to autogenerate the PK for each table and that is unique for each table and cant be duplicated on other tables. Let say I have table with PK of 1, so table2 to table6 wouldnt have a PK of 1. If table2 have a PK of 2, table1, table3 to table6 wouldnt have a PK of 2. Same for others. Identity will not be appropriate. Will 'uniqueidentifier' data type suffice? How bout guid? Or what must be my datatype? Or what will I do to implement this? Any links? Thanks
View 8 Replies View RelatedI am working with a form that I wish to construct a dynamic query from the results of. The forum has a date range and two radio buttons. Each radio button enables a list of items that can be clicked. So for example, if we assume the question,
"What is your favorite food, and what toppings do you like on it?" where the radio buttons are foods, the list boxes are toppings. Assuming the user can choose a Hamburger or a Salad with generic toppings, their choices are as such:
They can choose a Hamburger, with every topping
They can choose a Hamburger with a single topping.
They can choose a Hamburger with multiple toppings.
They can choose a Salad with the same combinations as above.
They cannot choose both a Hamburger and a Salad - mutually exclusive items.
Then, I wish to construct a query that, based on the conditions above, retrieves information relavent to their criteria, such a the number of food items to choose from, their price, etc. - basic information. What is the most efficient way to do this? Should I write a stored procedure with numerous conditionals and all available parameters, constructing the sproc as such:
Code Snippet
CREATE PROCEDURE GetFoodInfo
@from datetime,
@to datetime,
@FoodType varchar(20),
@toppings varchar(20)
AS
BEGIN
DECLARE @query varchar(300)
SET @query = 'SELECT COUNT(DISTINCT ' + @FoodType + ') '
IF @FoodType = 'Hamburger'
SET @query = @query + 'FROM Hamburgers '
ELSE
SET @query = @query + 'FROM Salads '
IF @toppings <> 'ALL'
SET @query = @query ' WHERE Toppings = ' + @toppings
EXEC (@query)
Apologies of this syntax is incorrect, but you get the general idea. Of course, this is a small example - in reality, I would have 5-10 conditional requirements Or, should I generate a stored procedure (or simple query) for each operation? For example, assuming each is a stored procedure:
GetHamburgers <-- would get Hamburgers with all toppings
GetHamburgersWithToppings
GetSalads
GetSaladsWithToppings
What is the best method for what I wish to achieve? What is fastest? Is there a better way than I have listed? Thank you.
Again, this is a small example, but I hope someone can help.
Hi, All
I'm using Gridview and SqlDataSource to dynamically display the contents in different tables, as followed:
<% dataSource.ConnectionString = System.Configuration.ConfigurationSettings.AppSettings["connectionString"]; dataSource.SelectCommand = "SELECT * FROM " + tableName; gridView.DataBind();
dataSource.UpdateCommand = "";%>
<asp:SqlDataSource ID="dataSource" runat="server"></asp:SqlDataSource><asp:GridView ID="gridView" runat="server" DataSourceID="dataSource" AllowPaging="True" AllowSorting="True" AutoGenerateEditButton="True" BorderColor="Silver" BorderStyle="Solid" BorderWidth="1px" CellPadding="3" PageSize="20" DataKeyNames="ID" OnRowDataBound="tableGridView_RowDataBound"> <HeaderStyle BackColor="#C0C0FF" /> <AlternatingRowStyle BackColor="#C0FFC0" /></asp:GridView>
The datasource take the "tableName" as argument to determine which table to display. My problem is I can't figure out a way to programmatically construct the UpdataCommand for the SqlDataSource. I try to get the field names from the HeaderRow, but all the cells are empty in this row.
Does anyone know what causes the problem or how to construct the UpdateCommand properly. Thanks!
Hi,In the past I build up the query string within VB.NET page and easy to add the filtering statements in the SQL statement since it is just a string. For example, if user selected an option then include it in the filter, otherwise, just return all rows from table:Codes in ASPX.VB: Dim SQL as String="SELECT * From Table1" IF UserOption <> Null then SQL = SQL & " WHERE Column1=" UserOption" End ifNow, since I have a complicated page which need to use Stored Procedure to manapulate a temporary table before the final result. But I found when I want to add some user options similar to above, I found I don't know how to do it in Stored Procedure. In the Stored Procedure Property screen, I can't insert a IF..THEN statement within a SELECT statement. Seems I can only check the user option first and then determine the SELECT statement to use. That is: IF UserOption THEN SELECT statement 1 ELSE SELECT statement 2.But it is impossible for me to do this way since I'm not only one user option on the page. User usually can have several filters/selections on his screen. So if check which user option(s) are selected and write a static SELECT statement for it, I will have to program a complicated store procedure to cater all combinations for all user options (where some options may be null).Hope you can understanding what my mean and give me advices.Regards,Raymond
View 8 Replies View RelatedReferencing the sample stored procedure
below that updates table 'this_table' containing
3 INT columns: 'key', 'col2', 'col3'.
How do I revise the stored procedure so that *** I do not
have to specify ALL the columns *** to update just one column?
e.g. if I want to update @col3 to 9 (exec sp_update_table, @col3 = 9),
how can I set col2 to its existing value?
create proc sp_update_table
@key int,
@col2 int,
@col3 int
as
update this_table
set col2 = @col2,
col3 = @col3
where key = @key
go
Hi Guys.
I want to construct a SQL in stored procedure in the following way. Please guide me how to achive this
CREATE PROCEDURE P_SAMPLE
(
@P_ONE NVARCHAR(240)
)
AS
BEGIN
DECLARE
@TMP_CNT INT
BEGIN
EXEC ('SELECT @TMP_CNT = 1')
-- PRINT @TMP_CNT
END
END
Regards
Mani
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....