How To Continue Package Execution During Error?

Jun 5, 2006

We have a package that loads the data from several excel files into database in a forloop.

Everything works files until the package hits the bad file.

My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.

How can force the for loop to continue when there is an error?

Is there any way to reset the errors?

Thanks

R

View 1 Replies


ADVERTISEMENT

Continue Package Execution On Task Failure

Dec 2, 2006

Hi,

I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.

Any suggestions greatly appreciated.

Thanks

View 4 Replies View Related

How Can I Stop Or Continue Package Execution Based On Variable Value

Aug 1, 2006

Hi,

I need to make my package check a variable value at the begining of the execution and depending on the value of that variable it decides either to continue or stop the package execution. How can i do that?

thanks,

Aref

View 1 Replies View Related

Insufficient Memory To Continue Error When Attempting To Save SSIS Package

May 12, 2006

When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.

Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.


Failure saving package. (Microsoft Visual Studio)

Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)

Advanced Error Message Details

Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)

View 3 Replies View Related

Continue Execution

Apr 15, 2008

In my package i have to loop through files and load the data from files into a table.
but if a file has error i need to move it to a folder like errored and continue execution with other files.

View 2 Replies View Related

Insufficient Memory To Continue The Execution

Nov 24, 2007

I have scheduled a SSIS package to run repeatedly by creating a scheduled SQL job that runs every minute . After every hour the packgae fails with the following error

Description: System.OutOfMemoryException: Insufficient memory to continue the execution of the program. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90.get_Value() at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() End Erro

The strange thing is that if i right click on SQL JOb and run it...it works fine.


Did anyone encounter similar problem or know the solution of the above problem ?

Thanks....

View 1 Replies View Related

Insufficient Memory To Continue The Execution Of The Program

Feb 7, 2008

Hi

I'm using VS'08, developing in VB.NET, using an SQL'05 DB and a local sync DB (3.5)

When attempting to append a record to the SQL CE DB's local sync'd table I get the error <<Insufficient memory to continue the execution of the program>>, the same record gets appended to the SQL'05 DB without error.

Ideas?

David L.

View 13 Replies View Related

Insufficient Memory To Continue The Execution Of The Program. (mscorlib)

May 24, 2008

Hi,

Received the error message below when we trying to execute an sql file which has insert statments and size of the file is 111mb. Environment - SQL Server 2005 - windows 2003.

Error Message - Insufficient Memory to continue the execution of the program. (mscorlib)

There is any resolution ?. Please advice.

Thanks
GuessMN

View 2 Replies View Related

Execute Package Task Can't Continue When The Child Package Failed?

Aug 25, 2006

I use a execute package task to run a child package in which I run some sql task.

as the error handle I insert a script task and link a line from execute package task to script task

of course the line is red,

but I found when the child package failed, the execute package task turns red,it stopped

the script task can't be run, I don't konw why?

View 9 Replies View Related

DTS Package Execution Error-URGENT!

Jun 15, 2001

Hello!
I'm trying to execute DTS package using dtsrun utility from MSDOS Prompt
and getting error message "Cannot Open user default database '<ID>'.Using master database instead".

here's the syntax

dtsrun -Stestserver -Utestuser -Ptestuser -Ncustomers


How can I resolve this?

Thank you

Lena

View 2 Replies View Related

SSIS Package Execution Error

Jul 24, 2006

While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.



But when scheduled through jobs it gives the following error in history

"Execution as user. <user name > The command line parameters are invalid. the step failed"

command line looks like this "

/DTS "MSDBMaintenance PlansPackage1-HYUNDAI" /SERVER tvmwindev02 /CONNECTION "10.10.1.52.upsframis";"Data Source=10.10.1.52;Initial Catalog=upsframis;Provider=SQLOLEDB.1;Integrated Security=SSPI;Auto Translate=False;" /CONNECTION DestinationConnectionOLEDB;"Data Source=mscoe.db.ustri.com;Initial Catalog=HISNA_POC;Provider=SQLOLEDB;Integrated Security=SSPI;Auto Translate=false;" /CONNECTION "sample.db2test";"Data Source=sample;User ID=db2test;Provider=IBMDADB2.1;Location=10.10.1.55;" /CONNECTION SourceConnectionOLEDB;"Data Source=SAMPLE;User ID=db2test;Provider=IBMDADB2.1;Persist Security Info=True;Location=10.10.1.55;Extended Properties="""";" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF

"

What could be the reason ?



Deleep.P

View 3 Replies View Related

SSIS Package Execution Error

Apr 24, 2008

Hello,



I have two packages which is having parent child relationship.



Package1 is calling Package2, Package2 will download the input files from remote server using COZYROC SFTP Task. then Package1 will execute.



It is working fine in BIDS and SQL Agent job in "DEV" Server. But it is not wroking when i deployed the packages and it's config files and then created a SQL Agent JOB to "QA" Server.



The Error is:



Description:
The connection type "SSH" specified for connection manager "LG-AUS" is not recognized as a valid connectionmanager type.
This error is returned when an attempt is made to create a connection manager for an unknown connect
ion type. Check the spelling in the connection type name.
End Error
Error: 2008-04-23 05:33:57.26
Code: 0xC0010018
Source:

Description:
Error loading value "<DTS:ConnectionManager xmlnsTS="www.micro
soft.com/SqlServer/Dts"><DTSroperty DTS:Name="DelayValidation">0</DTSroperty
><DTSroperty DTS:Name="ObjectName">SFTP-CMS</DTSroperty><DTSroperty DTS:Na
me="DTSID">{49D115FA-B208-4BFC-928D-7CC0964E743A}</DT" from node "DTS:Connection
Manager".
End Error
Error: 2008-04-23 05:33:57.29
Code: 0xC00220DE
Source: EPT Calling LG_Inbound

Description:
Error 0xC0010014 while loading package file "C:QATestLG-SFTPInbound.dtsx". One or more error
occurred. There should be more specific errors preceding this one that explains
the details of the errors. This message is used as a return value from functions
that encounter errors.
.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 5:33:55 AM
Finished: 5:33:57 AM
Elapsed: 1.359 seconds







Please give the solution ASAP.



Thanks

Thiru

View 4 Replies View Related

XML Parsing Error In Package Execution

Jun 8, 2007

I have a package that opens an XML file and stores the XML to a variable. Then the package executes a stored procedure passing the variable containing the XML data. This package had been working perfectly until I applied service pack 2 to SQL Server. Now when I execute the package I get an error when the stored procedure attempts to exeucte. The error is: "XML parsing: line 615, character 11, illegal xml character". The strange thing is that I can run profiler and copy out the command that is being executed and paste it into a query window and it exeuctes successfully in the query window. So does anyone know what changed with service pack two that is causing this problem and/or how to resolve it?



The position that the error message is referring to is the last character in the xml variable that the package is passing to the stored procedure. What I find strange is that it throws an error when called from the package but not when executed in the query window. Any help would be greatly appreciated. Below is a copy of the command from profiler that is throwing the error:



exec sp_executesql N'EXEC dbo.ABF_UpdateBillerList @P1, @P2',N'@P1 nvarchar(max),@P2 datetime',N'<billers>
<biller Key="8958">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26741">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26742">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33073">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33074">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218293">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218888">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13159">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13160">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13161">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16948">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26740">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16411">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16412">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="5136">
<billerFieldUpdates effDate="2007-06-07">
<acdind>C</acdind>
<billerNoteCurrent>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30029-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNoteCurrent>
<billerNotePrior>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30028-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNotePrior>
</billerFieldUpdates>
</biller>
<biller Key="8820">
<masks>
<mask Key="229786">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>560100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229787">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570105##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229788">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570106##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229789">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>580100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="9494">
<addresses>
<address Key="37164">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 1087</address1Current>
<cityCurrent>Norwich </cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CT</stateCurrent>
<postalCodeCurrent>06360-1087</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20439">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Norwich Dept of Public Utilities</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7572">
<masks>
<mask Key="229757">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>5########</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8844">
<addresses>
<address Key="26200">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>07101-0197</postalCodeCurrent>
<postalCodePrior>07101</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="26201">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>90030-0179</postalCodeCurrent>
<postalCodePrior>90030</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="37112">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 7835</address1Current>
<cityCurrent>Edison</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>08818-7835</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37113">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 54228</address1Current>
<cityCurrent>Los Angeles</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CA</stateCurrent>
<postalCodeCurrent>90054-0228</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37114">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 11731</address1Current>
<cityCurrent>Newark</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>07101-4731</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20435">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors - SMART</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20436">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors Federal - Smart</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26199">
<contactFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<stateCurrent />
<statePrior>NJ</statePrior>
<emailCurrent>billersupport@orcc.com</emailCurrent>
<emailPrior>billersupport@princetonecom.com</emailPrior>
<organizationCurrent>Online Resources</organizationCurrent>
<organizationPrior>Princeton eCom</organizationPrior>
</contactFieldUpdates>
<phones>
<phone Key="16180">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="19346">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<phoneNumCurrent>609-606-3370</phoneNumCurrent>
<phoneTypeCurrent>Phone</phoneTypeCurrent>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="3956">
<masks>
<mask Key="123272">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601921##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="123912">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601918##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229658">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601916##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229659">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>603464##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8215">
<addresses>
<address Key="20880">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19355-1114</postalCodeCurrent>
<postalCodePrior>19355</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="20885">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19493-0001</postalCodeCurrent>
<postalCodePrior>19493</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="19477">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Transamerica Life Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="19478">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>TLIC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7450">
<billerFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="31492">
<addressFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<contacts>
<contact Key="31491">
<contactFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="17309">
<phoneFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="8169">
<akas>
<aka Key="20419">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICO CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20420">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20421">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20422">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Long Term Care</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20423">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20424">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20425">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20426">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20427">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20428">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife, CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20429">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Insurance Co of Connecticut</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20430">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>MIC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20431">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Ins Co of CT</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20432">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20433">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co of New York</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20434">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY LTC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="9983">
<addresses>
<address Key="37075">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>PO Box 1335</address1Current>
<cityCurrent>Buffalo</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NY</stateCurrent>
<postalCodeCurrent>14240-1335</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="229671">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##############</maskFormatCurrent>
<maskLengthCurrent>14</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229672">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###############</maskFormatCurrent>
<maskLengthCurrent>15</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229673">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##################</maskFormatCurrent>
<maskLengthCurrent>18</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229674">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>####-####</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229675">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###-####</maskFormatCurrent>
<maskLengthCurrent>8</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="20380">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditor Interchange</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20381">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditors Exchange</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="1767">
<addresses>
<address Key="5189">
<addressFieldUpdates effDate="2007-06-06">
<acdind>C</acdind>
<postalCodeCurrent>50704-0780</postalCodeCurrent>
<postalCodePrior>50704-0788</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="1770">
<addresses>
<address Key="37073">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>1001 Fannin St. STE 4000</address1Current>
<cityCurrent>Houston</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>TX</stateCurrent>
<postalCodeCurrent>77002-6711</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="10101">
<addresses>
<address Key="36672">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>15250-7877</postalCodeCurrent>
<postalCodePrior>15250-0877</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="8957">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26738">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26739">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33071">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33072">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218292">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218887">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13157">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13158">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16947">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26737">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16409">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16410">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
</billers> ','2007-06-05 00:00:00:000'







Thanks!

gn

View 5 Replies View Related

DTExecUI - Package Execution Utility Error

Nov 7, 2006

Hi,

when i deploy my package using the DTExecUI thru the Package Execution Utility.when we execute the package . we are getting the following error.

The Product Levelis insufficient for component "Flat File Source(1)"

the package design is

FlatFileSource ----> OlEDBDestination

what could be the solution for this?

Thanks

Jegan

View 3 Replies View Related

Data Warehousing :: ETL Package Execution Error In Processing

Sep 25, 2015

ETL Packages are getting failed sometimes(Package Execution Error). Eventhough executing ETL Package again from start, getting the same Error. But after Restarting Sql Service in BI Server, it is working fine. Whether it is the issue from Developer Code side or from server side.

View 7 Replies View Related

This Task Or Container Has Failed, But Because FailPackageOnFailure Property Is FALSE, The Package Will Continue.

Apr 5, 2007

This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails.



I have just spotted the message above in one of my log files.



I've never noticed it before. Is it new in SP1? I'm guessing it must be.



If so - good job. This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).



-Jamie

View 3 Replies View Related

Error: SQL Server Internal Error. Text Manager Cannot Continue With Current Statement..

Sep 21, 2006

When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:

SQL Server Internal Error. Text manager cannot continue with current statement.

The server is running SQL Server 2000 with SP4.

I am really concerned because this is a production sever and there are over 300 users access concurrently.

Please help me to find a solution.

Thanks,

Roshan.

View 8 Replies View Related

Error Handling In MSSQL - If Error During Call Remote Stored Prcedure I Need SQL Code To Continue...

Jul 20, 2005

Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated

View 1 Replies View Related

SSIS Package Execution Error: Retrieving The COM Class Factory For Component With CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}

Mar 6, 2008



Hello Chaps,

I am using vb.net 2005 and SQL Server 2005.. I have deployed some of my packages on the server.. Now if i am trying execute packages with SSIS object model from any of developement PC they are executing perfectly. But as soon as i am trying to execute them from client pc - where no any component except (.netframwork) -- i am getting the follwoing error:


Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}

Can any one help me out..? i have gone through some of the article stating that SQL client componet must be installed on the computer from where app runs...

Is there any other solution to use SSIS object model...

Let me know if any one you have...!

Thanks,
Tarang Pandya

View 4 Replies View Related

How To Continue On Error

Jul 23, 2005

How can I cause my insert statement to skip over (without failing) rowswhere there's a primary key constraint violation?I've got a case where daily I insert >500k rows of daily data, wherethe data is date and time stamped. So, for example, I have an insertstatement with constraint: WHERE date >= '5/20/05' AND date <'5/21/05'. That takes care of one day's data (5/20).However, the next day's data (5/21) will still have some time stampsfrom the previous day. Therefore the statement needs to be somethinglike WHERE date >= '5/20/05' AND date <= '5/21/05'. The 5/20 data isalready loaded but I need to take the 5/21 data which just happens tocontain just a few rows of data marked 5/20 and insert it withoutgenerating a primary key error from all the other 5/20 rows that arealready inserted.-Dave

View 7 Replies View Related

Continue After Error

Aug 27, 2007

I have an SSIS package that uses a for each loop to send an order confirmation e-mail. If it does not find an email I need the package to continue after the failure path. The package stops after the failure, but I need it to continue with the next iteration of the for each loop. How can I do this?

View 4 Replies View Related

Execution Of Child Package From Parent Package In Sql Server 2005 Integration Services

May 21, 2007

Hi,

I created a package which passes some infornmations( through parameters) to its child package.

I need to do some processing in parent package based on execution status of child package.i.e.

if child fails then some operation and if child succeeds then other operation.

To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".

My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.

-Prashant

View 4 Replies View Related

Continue On If Certain Error Message

Jan 14, 2002

I have a sql statement which runs through a reference table to drop columns no longer needed. It works, however if it tries to delete a column that does not exist, it errors out. Is there a way to continue if this error appears(I have the set error routine set up) The question is can I tell it if it is this error to go on, and is "continue" the
right syntax? Below is statement

open dbcursor
fetch next from dbcursor into @tbname,@fldname,@recid
while (@@FETCH_STATUS <> -1)
begin
--set @tbname = 'IMMUNIZATION_MAST_'
--set @fldname = 'cb_other'
set @sql = 'alter table ' + ltrim(@tbname)
set @sql3= ' drop column ' + ltrim(@fldname)
exec(@sql + @sql3)
select @error = @@error
if @error = 5924
begin
CONTINUE?
end
print @error

View 1 Replies View Related

Error In Replication How To Continue

Jan 28, 2004

I have transactional Replication from A to B.

My distribution agent failed becos of a primary key violation error in a table.[i have not included the skip error option].

Then the replication stopped.
The transactions on other tables are also not replicated to B.

IF an error is encountered in one of the tables will the replication stop entirely??.Is there no way for the replication to continue for the rest of the tables..
Pls clarify

View 2 Replies View Related

Continue On INSERT Error.

May 10, 2007

Hi!



Imagine this SQL statement:






Code SnippetINSERT INTO B SELECT * FROM A






If one of the insert fails ... don't continue, the statement fail. For example if any field in A violate a constraint in B, the statement fails.



I want that the statement continue if errors occurs, if i lost a number of rows don't matter ... but if i can save or log this row will be great too !!



Is posible? Any way to do it?



Regards.

View 5 Replies View Related

Continue The Query If An Error Occured

Jan 12, 2004

I have a looped query querying linked servers. When it cannot connect to a server, it errors out.

Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.

How can I handle this error message and continue the query?

View 6 Replies View Related

Continue ForEach After An Error Was Handled

Mar 13, 2008

How can we continue with the rest of the iterations in ForEach Loop after handle an error.

I Have a dataflow task inside a for-each loop and processing a set of flat files in that. When error occurs in the dataflow task, i moved that particular flat file to another location. But, If an error occurs at first falt file, It moves that flat file to the location i specified and not continue with the next file (The Execution finished at that stage itself afetr the first flat file).

I Set the FailParentonFailue of Dataflow task to TRUE (Since its inside the for loop).

Any thing i have to change ? Or Where i miss the thing.

View 5 Replies View Related

Flat File Source - Continue On Error?

Oct 20, 2007

Hi

I have a CSV file which sometimes contains the odd CSV error, for this reason the odd row throws an error.

If I have a clean CSV file my SSIS package works great, but I am having problems getting the package to continue past the rows in the file that throw errors.

How do I :



Get the package to continue on error, I have tried playing with the Propagate Variable with no joy

Add an Error event, which will capture the error and log it to a SQL table or File Destination?
Any help will be great!

Thank you



View 3 Replies View Related

Cannot Continue Past Source File Error...

Nov 30, 2006

 

 

  I have an SSIS package where I have directed the error output to a Flat File Destination.  The issue is that there are some bad entried in a set of log files, where the source file reads on more delimited column than there are actual columns.  (As in there are 26 column headers, and one row will have 27 commas, or delimiters.)  I am trying to redirect the row output to put the bad rows into a Flat File for debugging purposes.  Although, the package is not able to continue past the error.  As soon as it hits the bad row, it fails despite the error output.

Any ideas?

View 2 Replies View Related

Error Handling - If Update Fails I Need Procedure To Continue...

Jan 7, 2004

Hi There,

If an update in a stored procedure fails/errors (as in (a) below) the procedure will not continue with (b) - I need the code in (b) to run despite whether the previous update was successful or not - Any ideas?


(a) if(@Data2 = 6)
begin
update
SCHEDULE
set
Start_CallBack = getdate()
where
(Block = @Block)
end


(b) WHILE @Block_Count > 0
BEGIN
UPDATE BLOCK SET Status = @Block_Status
END


Any help will be greatly appreciated :)

View 2 Replies View Related

Error Code: 60000000b8 Server Could Not Continue Transaction

May 27, 2008

Hi,

does anybody know this error code? I get that error from a jdbc-connection ocasionally but can't find an explanation. The original message is in German. The number should be ok. The error occures when a transaction is aborted, the jdbc-connection is lost.

'Der Server konnte die Transaktion nicht fortsetzen. Beschreibung: 60000000b8'

Please help,
Many thanks

View 2 Replies View Related

Flat File Source - If An Error Occurs, Continue Parsing The Remaining Columns In The Row Before Failing

Jan 14, 2008

Hello everyone,


I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.


My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.

- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".


Problem:
This configuration gives me only the first erroneous column in the row being processed.


Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.


Thanks in advance...
Samar

View 6 Replies View Related

DTS Package Execution

May 15, 2001

I have already created package which loads a text file to database.I wanted to execute that package based on the availability of the file using Visual Basic,Perl or VBSCRIPT whichever is easier.Please advise.Thanks

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved