Hi
I have trigger,that trigger having Procedure(This procedure is ment for sending mails),if we insert data we have to send mails about 2000 mails,this is goal,mail sending is OK but at that my application getting slow
can some give me the Best solution on this
regards
sreenivas
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies View RelatedUPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
Hey,
I'm new to this whole SQL Server 2005 thing as well as database design and I've read up on various ways I can integrate business constraints into my database. I'm not sure which way applies to me, but I could use a helping hand in the right direction.
A quick explanation of the various tables I'm dealing with:
WBS - the Work Breakdown Structure, for example: A - Widget 1, AA - Widget 1 Subsystem 1, and etc.
Impacts - the Risk or Opportunity impacts for the weights of a part/assembly. (See Assemblies have Impacts below)
Allocations - the review of the product in question, say Widget 1, in terms of various weight totals, including all parts. Example - September allocation, Initial Demo allocation, etc. Mostly used for weight history and trending
Parts - There are hundreds of Parts which will eventually lead to thousands. Each part has a WBS element. [Seems redundant, but parts are managed in-house, and WBS elements are cross-company and issued by the Government]
Parts have Allocations - For weight history and trending (see Allocations). Example, Nut 17 can have a September 1st allocation, a September 5th allocation, etc.
Assemblies - Parts are assemblies by themselves and can belong to multiple assemblies. Now, there can be multiple parts on a product, say, an unmanned ground vehicle (UGV), and so those parts can belong to a higher "assembly" [For example, there can be 3 Nut 17's (lower assembly) on Widget 1 Subsystem 2 (higher assembly) and 4 more on Widget 1 Subsystem 5, etc.]. What I'm concerned about is ensuring that the weight roll-ups are accurate for all of the assemblies.
Assemblies have Impacts - There is a risk and opportunity impact setup modeled into this design to allow for a risk or opportunity to be marked on a per-assembly level. That's all this table represents.
A part is allocated a weight and then assigned to an assembly. The Assemblies table holds this hierarchical information - the lower assembly and the higher one, both of which are Parts entries in the [Parts have Allocations] table.
Therefore, to ensure proper weight roll ups in the [Parts have Allocations] table on a per part-basis, I would like to check for any inserts, updates, deletes on both the [Parts have Allocations] table as well as the [Assemblies] table and then re-calculate the weight roll up for every assembly. Now, I'm not sure if this is a huge performance hog, but I do need to keep all the information as up-to-date and as accurate as possible. As such, I'm not sure which method is even correct, although it seems an AFTER DML trigger is in order (from what I've gathered thus far). Keep in mind, this trigger needs to go through and check every WBS or Part and then go through and check all of it's associated assemblies and then ensure the weights are correct by re-summing the weights listed.
If you need the design or create script (table layout), please let me know.
Thanks.
Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'
View 1 Replies View RelatedThis Audit Trigger is Generic (i.e. non-"Table Specific") attach it to any tabel and it should work. Be sure and create the 'Audit' table first though.
The following code write audit entries to a Table called
'Audit'
with columns
'ActionType' //varchar
'TableName' //varchar
'PK' //varchar
'FieldName' //varchar
'OldValue' //varchar
'NewValue' //varchar
'ChangeDateTime' //datetime
'ChangeBy' //varchar
using System;
using System.Data;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
public partial class Triggers
{
//A Generic Trigger for Insert, Update and Delete Actions on any Table
[Microsoft.SqlServer.Server.SqlTrigger(Name = "AuditTrigger", Event = "FOR INSERT, UPDATE, DELETE")]
public static void AuditTrigger()
{
SqlTriggerContext tcontext = SqlContext.TriggerContext; //Trigger Context
string TName; //Where we store the Altered Table's Name
string User; //Where we will store the Database Username
DataRow iRow; //DataRow to hold the inserted values
DataRow dRow; //DataRow to how the deleted/overwritten values
DataRow aRow; //Audit DataRow to build our Audit entry with
string PKString; //Will temporarily store the Primary Key Column Names and Values here
using (SqlConnection conn = new SqlConnection("context connection=true"))//Our Connection
{
conn.Open();//Open the Connection
//Build the AuditAdapter and Mathcing Table
SqlDataAdapter AuditAdapter = new SqlDataAdapter("SELECT * FROM Audit WHERE 1=0", conn);
DataTable AuditTable = new DataTable();
AuditAdapter.FillSchema(AuditTable, SchemaType.Source);
SqlCommandBuilder AuditCommandBuilder = new SqlCommandBuilder(AuditAdapter);//Populates the Insert command for us
//Get the inserted values
SqlDataAdapter Loader = new SqlDataAdapter("SELECT * from INSERTED", conn);
DataTable inserted = new DataTable();
Loader.Fill(inserted);
//Get the deleted and/or overwritten values
Loader.SelectCommand.CommandText = "SELECT * from DELETED";
DataTable deleted = new DataTable();
Loader.Fill(deleted);
//Retrieve the Name of the Table that currently has a lock from the executing command(i.e. the one that caused this trigger to fire)
SqlCommand cmd = new SqlCommand("SELECT object_name(resource_associated_entity_id) FROM
ys.dm_tran_locks WHERE request_session_id = @@spid and resource_type = 'OBJECT'", conn);
TName = cmd.ExecuteScalar().ToString();
//Retrieve the UserName of the current Database User
SqlCommand curUserCommand = new SqlCommand("SELECT system_user", conn);
User = curUserCommand.ExecuteScalar().ToString();
//Adapted the following command from a T-SQL audit trigger by Nigel Rivett
//http://www.nigelrivett.net/AuditTrailTrigger.html
SqlDataAdapter PKTableAdapter = new SqlDataAdapter(@"SELECT c.COLUMN_NAME
from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk ,
INFORMATION_SCHEMA.KEY_COLUMN_USAGE c
where pk.TABLE_NAME = '" + TName + @"'
and CONSTRAINT_TYPE = 'PRIMARY KEY'
and c.TABLE_NAME = pk.TABLE_NAME
and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME", conn);
DataTable PKTable = new DataTable();
PKTableAdapter.Fill(PKTable);
switch (tcontext.TriggerAction)//Switch on the Action occuring on the Table
{
case TriggerAction.Update:
iRow = inserted.Rows[0];//Get the inserted values in row form
dRow = deleted.Rows[0];//Get the overwritten values in row form
PKString = PKStringBuilder(PKTable, iRow);//the the Primary Keys and There values as a string
foreach (DataColumn column in inserted.Columns)//Walk through all possible Table Columns
{
if (!iRow[column.Ordinal].Equals(dRow[column.Ordinal]))//If value changed
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "U";//U for Update
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the entry
}
}
break;
case TriggerAction.Insert:
iRow = inserted.Rows[0];
PKString = PKStringBuilder(PKTable, iRow);
foreach (DataColumn column in inserted.Columns)
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "I";//I for Insert
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = null;
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
case TriggerAction.Delete:
dRow = deleted.Rows[0];
PKString = PKStringBuilder(PKTable, dRow);
foreach (DataColumn column in inserted.Columns)
{
//Build and Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "D";//D for Delete
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = null;
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
default:
//Do Nothing
break;
}
AuditAdapter.Update(AuditTable);//Write all Audit Entries back to AuditTable
conn.Close(); //Close the Connection
}
}
//Helper function that takes a Table of the Primary Key Column Names and the modified rows Values
//and builds a string of the form "<PKColumn1Name=Value1>,PKColumn2Name=Value2>,......"
public static string PKStringBuilder(DataTable primaryKeysTable, DataRow valuesDataRow)
{
string temp = String.Empty;
foreach (DataRow kColumn in primaryKeysTable.Rows)//for all Primary Keys of the Table that is being changed
{
temp = String.Concat(temp, String.Concat("<", kColumn[0].ToString(), "=", valuesDataRow[kColumn[0].ToString)].ToString(), ">,"));
}
return temp;
}
}
The trick was getting the Table Name and the Primary Key Columns.
I hope this code is found useful.
Comments and Suggestion will be much appreciated.
Table 1
First_Name
Middle_Name
Surname
John
Ian
Lennon
Mike
Buffalo
Tyson
Tom
Finney
Jones
Table 2
ID
F
M
S
DOB
1
Athony
Harold
Wilson
24/4/67
2
Margaret
Betty
Thathcer
1/1/1808
3
John
Ian
Lennon
2/2/1979
4
Mike
Buffalo
Tyson
3/4/04
5
Tom
Finney
Jones
1/1/2000
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However I€™m not sure how to increment the ID in table 2 or to update only the row that has been inserted.
A
ID
Name
1
Joe
2
Fred
3
Ian
4
Bill
B
ID
1
4
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger
on a
for insert
as
insert into b(ID)
select i.id
from inserted i
where
--specific USER
how to create new CLR trigger from existing T-Sql Trigger Thanks in advance
View 3 Replies View RelatedWhen a row gets modified and it invokes a trigger, we would like to beable to update the row that was modified inside the trigger. This is(basically) how we are doing it now:CREATE TRIGGER trTBL ON TBLFOR UPDATE, INSERT, DELETEasupdate TBLset fld = 'value'from inserted, TBLwhere inserted.id= TBL.id....This work fine but it seems like it could be optimized. Clearly we arehaving to scan the entire table again to update the row. But shouldn'tthe trigger already know which row invoked it. Do we have to scan thetable again for this row or is their some syntax that allows us toupdate the row that invoked the trigger. If not, why. It seems likethis would be a fairly common task. Thanks.
View 4 Replies View RelatedSalve, non riesco a disabilitare un trigger su sqlserver nè da queryanalyzer, nè da enterprise manager.In pratica tal cosa riuscivo a farla in Oracle con TOAD, mentre qui nonriesco.Mi interessa disattivarlo senza cancellarlo per poi riattivarlo al bisognosenza rilanciare lo script di creazione.Grazie a tuttiHi I need to disable a DB trigger and I'm not able to do this neither withquery analyzer, neither with enterprise manager.I remeber this job was quite simple using TOAd in Oracle.I'm interested in making it disabled not delete it, without run creationscript.Thanks a lot to everybody.
View 4 Replies View RelatedHi,
I am not sure if this is the right forum to post this question.
I run an update statement like "Update mytable set status='S' " on the SQL 2005 management Studio.
When I run "select * from mytable" for a few seconds all status = "S". After a few seconds all status turn to "H".
This is a behaviour when you have an update trigger for the table. But I don't see any triggers under this table.
What else would cause the database automatically change my update?
Could there be any other place I should look for an update trigger on this table?
Thanks,
Hi all in .net I've created an application that allows creation of triggers, i also want to allow the deletion of triggers.
The trigger name is kept in a table, and apon deleting the record i want to use the field name to delete the trigger
I have the following Trigger
the error is at
DROP TRIGGER @DeleteTrigger
I'm guessing it dosen't like the trigger name being a variable instead of a static name
how do i get around this?
thanks in advance
-- ================================================
-- Template generated from Template Explorer using:
-- Create Trigger (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- See additional Create Trigger templates for more
-- examples of different Trigger statements.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE TRIGGER RemoveTriggers
ON tblTriggers
AFTER DELETE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
Declare @DeleteTrigger as nvarchar(max)
select @DeleteTrigger = TableName FROM DELETED
IF OBJECT_ID (@DeleteTrigger,'TR') IS NOT NULL
DROP TRIGGER @DeleteTrigger
GO
END
GO
Hi,
I have a trigger set on TABLE1 so that any update to this column should set off trigger to write to the AUDIT log table, it works fine otherwise but not the very first time when table1 has null in the column. if i comment out
and i.req_fname <> d.req_fname from the where clause then it works fine the first time too. Seems like null value of the column is messing things up
Any thoughts?
Here is my t-sql
Insert into dbo.AUDIT (audit_req, audit_new_value, audit_field, audit_user)
select i.req_guid, i.req_fname, 'req_fname', IsNull(i.req_last_update_user,@default_user) as username from inserted i, deleted d
where i.req_guid = d.req_guid
and i.req_fname <> d.req_fname
Thanks,
leo
Hi,
I want to be able to alter the filename that my DTS package imports programmactically with a T-SQL stored procedure.
Is this possible, I really dont want to write a VB/COM package just to do this!
Jason
My development environment includes Visual Web Developer, SQL Server 2005 Express and SQL Server Management Studio Express. I have a .sql control string that creates a database. The control string is in my App_Data folder within my web site. When I use SQL Server Managment Studio Express to run the .sql control string and create the tables etc. it does it in my SQLEXPRESS folder and not in the web.
How do I run the .sql file so it will create the database in my App_Data folder within the web site?
Thanks,
Kyleq
I wanna know how to retrieve & insert an image from/to a Sql Server database.
using image control or any other control
I’ve done that with windows form picture box.
As that was explained in MS tutorials
Code….
-------------------------------------------Dim ms As New MemoryStreamPictureBox1.Image.Save(ms, PictureBox1.Image.RawFormat)Dim arrImage() As Byte = ms.GetBuffer
ms.Close() Dim strSQL As String = _ "INSERT INTO Emp (EmpName,EmpSalary,Picture)" & _ "VALUES (@EmpName,@EmpSalary,@Picture)" Dim cmd As New SqlCommand(strSQL, ConnEmp) With cmd .Parameters.Add(New SqlParameter("@Picture", _ SqlDbType.Image)).Value = arrImage .Parameters.Add(New SqlParameter("@EmpName", _ SqlDbType.NVarChar)).Value = txtEmpName.Text .Parameters.Add(New SqlParameter("@EmpSalary", _ SqlDbType.Decimal)).Value = txtEmpSalary.Text End With
cmd.ExecuteNonQuery()
-------------------------------------------
But with a web form’s image control I DO NOT know how to do it
I real appreciate your help
Thank you
please explain selectparameters and conflict detection property within sqldatasource control
mohsen
Hi,i have a question, i have a VS2005 and a SQL server 2000 enterprise in my office that i used for web developement,iam new to this, i made a data driven site using some automated controls available in the toolbox, but i need to made some manual process, like i need to make a LABEL show the SUM of specific number fields from my data base, they say i have to make a OLEDB connection using VB, but i don't know how,can you tell me how?Thanks
View 13 Replies View Relatedhi friends,
I created sqldatasource control. In select command i written the query like this "select * form emp" and bounded in grid.How can I change the query for searching the details according the date wise when i click the search button.
Hello experts
i have a SqlDataSource Control on my web form. Here is the source for the control
<asp:SqlDataSource ID="sqlSearchDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:DbefomsConnectionString %>"
SelectCommand="SELECT [icon], [file_name], [path] FROM [tblfile] WHERE ([file_name] = @file_name)">
<SelectParameters>
<asp:ControlParameter ControlID="txtSearch" DefaultValue="0" Name="file_name" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This control displays icon, file_name, path in GridView Control
The problem is How can i store the above field values in an asp.net variable.
Thanks
Regards
Ali
Hi! I'm building a web application with ASP.NET, and using MS SQL 2000 for my database server.
How should I do to guarantee the integrity of the data in spite of the concurrent access? Meaning... how can I make sure that more than 1 user can update 1 table at the same time, while no error will occur? Do I need to add some codes at my aspx file? Or do I need to do something to my database? Or do I not have to worry about it?
Thank you.
If i use the TimeTracker app from the starter kit suite and I enter my SQL connection in the web.config file it works fine,
If i build a simple app with just a sqladapter, sqlconnection and dataset control then enter in the page_load procedure
sqlDataAdater1.fill(dataset11)
datagrid1.databind()
It keeps giving my errors see below: I created a connection with the sqlconnection control and used the same userid and password I used in the time tracker stater kit's web config file which works - I have no idea what is going on
*** is it better to create the sqlconnection control first then create the sqladapter or vise versa.
Server Error in '/WebApplication2' Application.
Login failed for user 'IssueTrackerUser'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IssueTrackerUser'.Source Error:
Line 55: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 56: 'Put user code to initialize the page here
Line 57: SqlDataAdapter1.Fill(DataSet11)
Line 58: DataGrid1.DataBind()
Line 59: Source File: c:inetpubwwwrootWebApplication2WebForm1.aspx.vb Line: 57 Stack Trace:
[SqlException: Login failed for user 'IssueTrackerUser'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState)
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
WebApplication2.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootWebApplication2WebForm1.aspx.vb:57
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Do you have to use the sqldatasource in conjuction with another control like gridview or dropdown list?
I'd like to check to see if a record exists in one table before inserting data into another.
thanks
Hello.I'm new to ASP.NET and trying to write data to a Microsft SQL Server. I have created a SqlDataSource control, which is 'connected' to my SQL server.Now my question is how i can put data in the database throw the control, and read data from it. I've read the site, but it's still unclear for me..Greetings!
View 1 Replies View RelatedI'm writing a page to do some reporting off of one of our databases, and I'm using 3 control parameters for my sql query that feeds my datagrid. 2 of the ControlParameters are from dropdownlists, and one is from a RadioButtonList. The ControlParameters that reference the dropdownlists are both working well, but the one for the RadioButtonList is not.
The error I am getting is: Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '@Booga'. (I changed my ControlParameter name from DateStr to Booga to try to avoid any conflicts with reserved words.)Any ideas? Here is a snippet of my code:
<form id="form1" runat="server">
<table width="100%">
<tr>
<td style="text-align: center">
<strong>DataCenter</strong></td>
<td style="text-align: center">
<strong>Time Scope</strong></td>
<td style="text-align: center">
<strong>Call Status</strong></td>
</tr>
<tr>
<td style="height: 47px; text-align: center">
<asp:DropDownList ID="DropDownList1" DataSourceID="SqlDataSource2" AutoPostBack="true" DataTextField="LocationName" runat="server" />
</td>
<td style="height: 47px; text-align: center">
<asp:RadioButtonList ID="RadioButtonList1" runat="server" AutoPostBack="true" Font-Size="Smaller">
<asp:ListItem Selected="True" Value=" 1 = 1 ">All</asp:ListItem>
<asp:ListItem Value="((CAST(CallLog.RecvdDate AS smalldatetime) + 1) >= (CAST(GETDATE() AS smalldatetime)))">Last Day</asp:ListItem>
<asp:ListItem Value="((CAST(CallLog.RecvdDate AS smalldatetime) + 7) >= (CAST(GETDATE() AS smalldatetime)))">Last Week</asp:ListItem>
<asp:ListItem Value="((CAST(CallLog.RecvdDate AS smalldatetime) + 30) >= (CAST(GETDATE() AS smalldatetime)))">Last 30 Days</asp:ListItem>
<asp:ListItem Value="((CAST(CallLog.RecvdDate AS smalldatetime) + 120) >= (CAST(GETDATE() AS smalldatetime)))">Last 120 Days</asp:ListItem>
</asp:RadioButtonList></td>
<td style="height: 47px; text-align: center">
<asp:DropDownList ID="DropDownList2" AutoPostBack="true" runat="server">
<asp:ListItem Selected="True" Value="Open">Open</asp:ListItem>
<asp:ListItem Value="Closed">Closed</asp:ListItem>
</asp:DropDownList></td>
</tr>
</table>
<br />
<p style="text-align: center"><strong>Displaying All Open Tickets</strong><br /></p>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" SelectCommand="SELECT DISTINCT [locationname] FROM [profile]"
ConnectionString="<%$ ConnectionStrings:Heat %>" />
<table width="100%">
<tr width="100%">
<td valign="top" width="100%">
<asp:GridView ID="GridView1" AllowSorting="True" runat="server"
DataSourceID="SqlDataSource1" DataKeyNames="CallID"
AutoGenerateColumns="False" Font-Size="Smaller" Width="100%" >
<Columns>
<asp:CommandField />
<asp:BoundField DataField="CallID" HeaderText="Call ID" ReadOnly="True" SortExpression="CallID" />
<asp:BoundField DataField="CustID" HeaderText="Customer ID" ReadOnly="True" SortExpression="CustID" />
<asp:BoundField DataField="CallType" HeaderText="Call Type" ReadOnly="True" SortExpression="CallType" />
<asp:BoundField DataField="Priority" HeaderText="Priority" ReadOnly="True" SortExpression="Priority" />
<asp:BoundField DataField="Cause" HeaderText="Cause" ReadOnly="True" SortExpression="Cause" />
<asp:BoundField DataField="CallDesc" HeaderText="Call Description" ReadOnly="True" SortExpression="CallDesc" >
<ItemStyle Width=40% />
</asp:BoundField>
<asp:BoundField DataField="RecvdBy" HeaderText="Received By" ReadOnly="True" SortExpression="RecvdBy" />
<asp:BoundField DataField="RecvdDate" HeaderText="Call Date" ReadOnly="True" SortExpression="RecvdDate" >
<ItemStyle Wrap="False" />
</asp:BoundField>
<asp:BoundField DataField="RecvdTime" HeaderText="Call Time" ReadOnly="True" SortExpression="RecvdTime" >
<ItemStyle Wrap="False" />
</asp:BoundField>
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" SelectCommand="SELECT * FROM CallLog INNER JOIN Profile ON CallLog.CustID = Profile.CustID WHERE (Profile.LocationName = @LocationName) AND (CallLog.CallStatus = @CallStatus) AND @Booga "
ConnectionString="<%$ ConnectionStrings:Heat %>">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="LocationName" PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="DropDownList2" Name="CallStatus" PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="RadioButtonList1" Name="Booga" PropertyName="SelectedValue" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
</td>
</tr>
</table>
<br />
<br />
<br />
<br />
</form>
Can someone please tell me what I am doing wrong...
I have a simple webform that has contains a GridView and a DetailsView. Once the GridView is populated the user simply selects a record from the list. The DetailsView is them populated with all of the data from the selected record.
The DetailsView is bound to a SQL DataSource/CustomerData. I have made sure that the DV control has the Edit/Update Command listed. The user can click the Edit button and successfully edit the fields but when the user clicks the "Update" button I am getting the following message.
Updating is not supported by data source 'CustomerData' unless UpdateCommand is specified
Why isnt the control handling the Update.
Many Thanks!!!!
T
I am trying to use the FileUpload control to save a filename to a SQL database. I'm using the OnUpdating event for my SQLDataSource to add the filename to the UpdateParameters. The OnUpdating event is firing but the FileName doesn't get added to the database. Any pointers as to why that might be would be very helpful.
Here's the code. Thanks much.
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="File Upload Testing" %>
<script runat="server">
Sub Page_Load()
Response.Write("UpdateParameters(0)=" & dsLabel.UpdateParameters(0).Name & "<br />")
Response.Write("UpdateParameters(1)=" & dsLabel.UpdateParameters(1).Name & "<br />")
End Sub
Sub dsLabel_OnUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs)
Dim FileUploadControl As FileUpload = DetailsView1.FindControl("FileUpload1")
Dim strFileName As String = FileUploadControl.FileName
dsLabel.UpdateParameters(0).DefaultValue = strFileName
dsLabel.UpdateParameters(1).DefaultValue = Request.QueryString("rgstnID")
Response.Write("dsLabel.UpdateParameters(0).DefaultValue = " & dsLabel.UpdateParameters(0).DefaultValue & "<br />")
Response.Write("dsLabel.UpdateParameters(1).DefaultValue = " & dsLabel.UpdateParameters(1).DefaultValue & "<br />")
End Sub
</script>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<h1>File Upload</h1>
This page should allow me to use the FileUpload Control to save a filename to an MS SQL Database.<br />
<br />
<asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False"
DataSourceID="dsLabel" Height="50px" Width="125px">
<Fields>
<asp:TemplateField HeaderText="File" SortExpression="labelName">
<EditItemTemplate>
<asp:FileUpload ID="FileUpload1" runat="server" />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="Label1" runat="server" Text='<%# Bind("labelName") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:CommandField ButtonType="Button" ShowEditButton="True" />
</Fields>
</asp:DetailsView>
<br />
<br />
<asp:SqlDataSource ID="dsLabel" runat="server"
ConnectionString="Data Source=FILESERVER1;Initial Catalog=IM;Integrated Security=True"
OnUpdating="dsLabel_OnUpdating"
ProviderName="System.Data.SqlClient"
SelectCommand="SELECT labelName FROM tblProductRegistration WHERE (registrationID = @registrationID)"
UpdateCommand="UPDATE tblProductRegistration SET labelName = @LabelName WHERE (registrationID = @registrationID)">
<UpdateParameters>
<asp:Parameter ConvertEmptyStringToNull="True" Name="LabelName" />
<asp:QueryStringParameter Type="Int64" Name="registrationID" QueryStringField="rgstnID" />
</UpdateParameters>
<SelectParameters>
<asp:QueryStringParameter Name="registrationID" QueryStringField="rgstnID" />
</SelectParameters>
</asp:SqlDataSource>
</asp:Content>
Does SQL 6.5 integrate with visual source safe to provide revision control of your stored procedures and queries? If not, is there a product for controlling revision control on a SQL 6.5 server?
View 1 Replies View RelatedIs anybody aware of how I can audit redundant Stored Procedures [SP] out of a large application. I only have the SQL-Server (no Sourcesafe/CVS). I need to know when an SP was last accessed. There are over seven hundered SPs.
Any help appreciated
Neil.
Is there any access control available for the DTS package? I want to create an a/c that can create/modify but cannot delete DTS. Is there any way I can do that?
View 2 Replies View Relatedhi all,
i wonder if could accomplish this problem in sql..
say i wanna total sum up some qty in table 1, and the sum up qty appear in table 2.. means everytime qty in table 1 change, it will sum up automatically total qty in tbl1 :-
table 1
id qty
1 5
2 5
2 5
1 5
table 2
id SumQty
1 10
2 10
note: table 2 will sum up automatically, isit possible to do this?