Hi there, I've a question regaarding datatype conversions... I can't convert the above mentioned datatype. I always get an error message that the conversion fails. Doesn't matter If convert or cast is used.
How would you convert the above mentioned variable into float???
I have a sp that receive a rango of float values,and I need to convert this values to a varchar(20).
I am trying the next but I got a strange result.
@intNoTarjIni = 121456790
set @strTarjeta=cast(@intNoTarjIni as varchar(20))
returns: 1.21457e+008
set @strTarjeta=convert( varchar(20),@intNoTarjIni)
returns:1.21457e+008
How can I convert sucessfully a float to varchar?
Hi -
My field TDMergerVotePercent is defined as a float field. I want it to return 'NA' when the value is -1 but I'm getting the error message
'Error converting data type varchar to float' in my aspx page. Is there where the CAST function can be used? Thanks
CASE
WHEN TDMergerVotePercent = -1 THEN 'NA'
WHEN TDMergerVotePercent IS NULL THEN ''
ELSE TDMergerVotePercent
END AS TDMergerVotePercent
Is this possible? I'm trying to user a lookup task and the data I want to compare is a varchar to float. How can I do this? I tried using the data conversion task and it didn't work and also tried cast and convert. Is this even possible or is there a way around it?
thanks,
I've three columns:
Length Width Height
1.5 2.5 10
2 3.7 19
in Query I want to display Like 1.5 X 2.5 X 10 (Length, Width, Height).....
???
Hello,
Is there a way to convert varchar or char to float?
Thank you
I have a field in my database that is stored as varchar. The values are usually contain a decimal, and should have really been a float or decimal. In order for me to do analytics in my BI environment, I need to convert this to a float or decimal.
eg of values.
10.00
20.00
0.00
15.00
or could be missing when I use cast(value as float) or cast(value as decimal(9,2)) or convert(float, value) I get an error
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
I have the following CASE statement:
SELECT CASE WHEN [TBL_whole_rock_geochem].au = 0 THEN '<' + [TBL_ActLab_codes].[Au] ELSE [TBL_whole_rock_geochem].[Au] END AS [Au det]
It errors on the highlighted code.
Error converting data type nvarchar to float
the code should return :
<0.5
<1
I have tried '<' + ISNUMERIC([TBL_ActLab_codes].[Au]) but received this error
Conversion failed when converting the varchar value '<' to data type int.
How I can concatenate the < with a float value?
I can't take full credit for this. I want to share this with Jeff Moden who did the important research for this calculation here.
All I did was just adapting some old code according to the mantissa finding Jeff made and optimized it a little
Some test codeDECLARE@SomeNumber FLOAT,
@BinFloat BINARY(8)
SELECT@SomeNumber = -185.6125,
@BinFloat = CAST(@SomeNumber AS BINARY(8))
SELECT@SomeNumber AS [Original],
CAST(@SomeNumber AS BINARY(8)) AS [Binary],
dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Converted],
@SomeNumber - dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Error]
And here is the code for the function.CREATE FUNCTION dbo.fnBinaryFloat2Float
(
@BinaryFloat BINARY(8)
)
RETURNS FLOAT
AS
BEGIN
DECLARE@Part TINYINT,
@PartValue TINYINT,
@Mask TINYINT,
@Mantissa FLOAT,
@Exponent SMALLINT,
@Bit TINYINT,
@Ln2 FLOAT,
@BigValue BIGINT
SELECT@Part = 1,
@Mantissa = 1,
@Bit = 1,
@Ln2 = LOG(2),
@BigValue = CAST(@BinaryFloat AS BIGINT),
@Exponent = (@BigValue & 0x7ff0000000000000) / EXP(52 * @Ln2)
WHILE @Part <= 8
BEGIN
SELECT@Part = @Part + 1,
@PartValue = CAST(SUBSTRING(@BinaryFloat, @Part, 1) AS TINYINT),
@Mask =CASE WHEN @Part = 2 THEN 8 ELSE 128 END
WHILE @Mask > 0
BEGIN
IF @PartValue & @Mask > 0
SET @Mantissa = @Mantissa + EXP(-@Bit * @Ln2)
SELECT@Bit = @Bit + 1,
@Mask = @Mask / 2
END
END
RETURNSIGN(@BigValue) * @Mantissa * POWER(CAST(2 AS FLOAT), @Exponent - 1023)
END
Thanks again Jeff!
Peter Larsson
Helsingborg, Sweden
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
Hi-
I am trying the following example.
create table mytest (a float, b float(8))
declare @a FLOAT
declare @b varchar(10)
set @b = '0.4'
set @a = @b
PRINT @a
The result is 0.40000000000000002.
Can some one tell me what am I doing wrong? Appreciate your time.
- Sarat
Hi all,
I'm trying to update a table as follows:
Where in the table i got.
OldCol; a varchar
NewCol; Float
Update tbl set newCol = cast(float,oldcol)
Where isNumeric(oldcol) =1
But it give me the follwong error:
Error converting data type from Varchar to Float.
Any suggestion?
Hi,
Can I convert from float to varchar without trunc the values? Can I use any mask like '#.##'?
from -> cast ( 123.44 as varchar(256) )
result = '123.44'
thanks,
I'm trying to find a way to format a FLOAT variable into a varchar inSQL Server 2000 but using CAST/CONVERT I can only get scientificnotation i.e. 1e+006 instead of 1000000 which isn't really what Iwanted.Preferably the varchar would display the number to 2 decimal placesbut I'd settle for integers only as this conversion isn't businesscritical and is a nice to have for background information.Casting to MONEY or NUMERIC before converting to a varchar works finefor most cases but of course runs the risk of arithmetic overflow ifthe FLOAT value is too precise for MONEY/NUMERIC to handle. If anyoneknows of an easy way to test whether overflow will occur and thereforeto know not to convert it then that would be an option.I appreciate SQL Server isn't great at formatting and it would be fareasier in the client code but code this is being performed as adescription of a very simple calculation in a trigger, all stored tothe database on the server side so there's no opportunity for clientintervention.Example code:declare @testFloat floatselect @testFloat = 1000000.12select convert(varchar(100),@testFloat) -- gives 1e+006select cast(@testFloat as varchar(100)) -- gives 1e+006select convert(varchar(100),cast(@testFloat as money)) -- gives1000000.12select @testFloat = 12345678905345633453453624453453524.123select convert(varchar(100),cast(@testFloat as money)) -- givesarithmetic overflow errorselect convert(varchar(100),cast(@testFloat as numeric)) -- givesarithmetic overflow errorAny suggestions welcome...CheersDave
View 3 Replies View RelatedHi,
why does converting integer to float take so long? Its a column with about 5 Million rows.
I want to avoid cast(inumber1 as float) / cast(inmuber2 as float), thats why converting them. Queries should be a bit faster after that.. hope so :)
Thanks a lot
Hi,
I have a excel file and i am trying to import zip codes to the database... but the some of the zip codes start with 06902 but the excel file treats them as float but i want to treat them as varchar...
How can i do it.
Regards
Karen
Error converting data type varchar to float.
I am getting this error. Any one there to guide me
hello anyone... i got this message "Error converting data type varchar to float" when i was trying to insert values into table using instead of trigger...
below is my table ClimateData
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[ClimateData] Script Date: 03/26/2008 03:04:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[ClimateData] WITH CHECK ADD CONSTRAINT [FK_ClimateData_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below is photovoltaic table
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[Photovoltaic] Script Date: 03/26/2008 03:06:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_OrganizationDetail] FOREIGN KEY([Org_application_id])
REFERENCES [dbo].[OrganizationDetail] ([Org_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_Users] FOREIGN KEY([User_application_id])
REFERENCES [dbo].[Users] ([User_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below also my command for instead of trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Organization Detail already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Organization Types already in the table ***/
END -- trigger def
and finally, i hav tried using this command to insert into table v_PhotovoltaicClimateData.. this is the command to insert
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44, 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
and i got this error...
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
so anyone... plzz help me...
Hello everyone... i have some problem with instead of trigger... after insert values into v_PhotovoltaicClimateData, i got this error, Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
below is my DDL for Photovoltaic table
quote:CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Below is my DDL for ClimateData table
quote:CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
below is my v_PhotovoltaicClimateData
quote:CREATE VIEW [dbo].[v_PhotovoltaicClimateData]
AS
SELECT dbo.Photovoltaic.PV_site, dbo.Photovoltaic.PV_state, dbo.Photovoltaic.PV_type_of_system, dbo.Photovoltaic.PV_nominal_power,
dbo.Photovoltaic.PV_module, dbo.Photovoltaic.PV_mounting, dbo.ClimateData.Latitude, dbo.ClimateData.Longitude, dbo.ClimateData.Altitude,
dbo.ClimateData.Climate_type
FROM dbo.ClimateData INNER JOIN
dbo.Photovoltaic ON dbo.ClimateData.PV_application_id = dbo.Photovoltaic.PV_application_id
below is my instead of trigger command...
quote:CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Photovoltaic already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Climate Data already in the table ***/
END -- trigger def
this is my commad insert values using instead of trigger that i've created...
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44 , 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
after execute this commad, i got this error..
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
what should i do??? anyone help me.
I have created a stored procedure that contain this field (below) inorder to meet certain criteria. But my problem is when I try to runthe stored procedure I encounter an error "Error converting data typevarchar to float".CASE Final WHEN 0 THEN '--' ELSE Final END AS FinalGradeThe Final field is a float data type.Could anyone teach me how to fix this problem?
View 1 Replies View Relatedhi, how can I convert a float to a char so I can do:
'£' + convert(char,amount) AS [money]
When I do the above the number is like 1.07848e+006
rather than 1078480
thans for any help.
jamie
I have a data type float with a value of 10000487930 that I'm trying to insert into a data type nvarchar and am getting the result of '1.00005e+010'. I've tried cast(field as nvarchar) however this is not working. What might fix this? I cannot change the insert table data type.
View 3 Replies View RelatedHello,I would like to convert a field from ntext field found in one databasetable to float field found in another database table. The reason why Iwant to do this is a long one.I have tried the following and playing around with the following:declare @valuePointer varbinary(16)<Row cursor logic to initialize @valuePointer to be a pointer to thesource ntext field>update TargetFloatTable set TargetFloatTable.TargetFloatValue =CAST(CAST(@valuePointer AS nvarchar) AS float)where TargetFloatTable.Id = @Idbut is not working for me.Hoping someone out there can help.Thanks,Cally
View 5 Replies View RelatedSelect Cast('100.1234' as float)give me the result 100.1234Now when I convert it back to char I want exactly 100.1234Select Convert(char(100),Cast('100.1234' as float))Gives me 100.123 (Here I was expecting 100.1234)When I doSelect STR(Cast('100.1234' as float),25,4)I get back the result as 100.1234However here I am not sure how many digits do I have after the decimalpoint. If I put some value likeSelect STR(Cast('100.1234' as float),25,8)I get 0's appended to it, which is again not desired.Thanks in advance,Jai
View 4 Replies View RelatedI'm running the following statement...
The column is currently float (8). Need to convert to numeric. I've tried cast, convert. no go for either.
Any help on this would be greatly appreciated.
..... select ... convert(numeric(38,0), colname)
TIA,
Jeremy
Hi,
Can you guys help me out?
I m trying to sum up some varchar-typed field. I need to convert it to float before doing the summing up so I m using "Cast".
I do get the answer but its not the correct figure. My SQL statement is as follow:
SELECT Sum((Cast(Qty1 as float)) + (Cast(Qty2 as float))) as intAnswer FROM TableName
Please help.
What actually happens when I convert date to float? Select convert(float,getdate(),112)
View 1 Replies View RelatedHi,
how to convert nvarchar datatype to float?
Regards
Prashant
Hello I have some problems with converting varbinary to float in T-SQLstored procedure. In my C# application i have table of structures withdouble type fields. Size of this table is variant. I have to send thistable to SP. Because of performance i want to send it only once andwhole. So I have to cut this varbinary blob in my Stored procedure toreceive structure field values. But I have problems with double fields- conversion from varbinary to float in T-SQL is not allowed. Pleasehalp me - thx for any advise.Maciej
View 1 Replies View RelatedI have a column type of float and How to convert it show like this
default value =39260.80 MY db use this ',' seperator instead of '.'
wanna convert 39,260
This code is working if using '.' seperator
SELECT parsename(convert(varchar,CAST(floor('39260.80') AS MONEY),1),2)
not work using ',' seperator
SELECT parsename(convert(varchar,CAST(floor('39260,80') AS MONEY),1),2)
I'm trying to move records from a SQL table with a float column to a DB2 database that has the column defined as Decimal (8,2) It keeps crashing saying it has a type mismatch problem. I tried changing my source command to pass in the column already converted and it still crashes on this. I also tried doing a data conversion task to do the conversion and I still get the same error. Any ideas?
View 3 Replies View RelatedAm converting varchar field to float and summing using group by and next inserting to varchar field(table).
while inserting float value it is converting to exponential ex:1.04177e+006 but if i execute only select statment actual float value will get display ex:1041765.726
My question is why it is converting while inserting ? and how to avoid it.
select query : SUM(CONVERT(float,(rtrim(REPLACE(REPLACE( column1, CHAR(13), ' '), CHAR(10), ' '))))) as AggregateValue
Hi,
I have a excel file which i want to import the data to sql server... The sql server Data type for that particular column is
varchar and it has a contraint too like the data should be in this fashion 00000-0000 or 00000...
but when i try to import the data from the excel to sql server... 08545 just becomes 8545 (cause excel is treating it as a float) and so my insert fails...
what can i do to rectify the problem...
regards
Karen