Hi all,
I am using a varchar datatype for PIN number to handle zero at start. Now i want to do mathematical calculation to encrypt the PIN so i need to convert that varchar datatype to int so that zero should not be discarted after conversion. i.e. 0123 and 123 must not be treated as same PIN.
Please kindly give me a way out. I am using RSA encryption.
Thanks in anticipation.
Haider Abbas.
Hi,
I have a talbe with a column type varchar(8000). i am facing problems sometimes as it corsses the limit also have the problems with special characters. so i went through few articles and been advised to use xml datatype. but when i am changing comumn name from varchar (8000) to xml as:
alter table tblStudentForm alter column FormDetails xml not null
i am getting following error:
Msg 9400, Level 16, State 1, Line 1
XML parsing: line 46, character 402, unexpected end of input
The statement has been terminated.
Please any one can advice how to alter on this.
Thanks
Dilip.
I have a table Table1 which has a Col called "Msg" datatype image<binary>. Msg alreay has the plain text or RTF text as a image datatype (binary)If I execute the following query "Select Msg from Table1 where id =3" then this query is returning the following ASCII/Binary data.Msg = "0x7B5C727466315C616E73695C616E7369637067313235325C64656666305C6465666C616E67313033337B5C666F6E7474626C7B5C66305C6673776973735C66707271325C66636861727365743020417269616C3B7D7B5C66315C6673776973735C66707271325C666368617273657430204D6963726F736F667420"Can any body tell me how can I convert the above binary data to plain text from my query?Thanks for any reply.
View 1 Replies View RelatedI have a column on my table with the varchar(50) datatype. The whole column has the value 2014-04-31
I want to Convert the varchar(50)datatype to datetime datatype.
The table name is called - dbo.pracs
the column name is - LastDatUpaded
Need to fetch the date from parent table to chile table. This is the script ....
case When @AccountingDate IS NULL THEN NULL ELSE CONVERT (varchar,@AccountingDate , 101) END,
Case When @InventoryDate IS NULL THEN NULL ELSE CONVERT (varchar,@InventoryDate,101) END,
Case When @StatusDate IS NULL THEN NULL ELSE CONVERT (varchar,@StatusDate,101) END,
Case When @LastInstallmentDate IS NULL THEN NULL ELSE CONVERT (varchar,@LastInstallmentDate,101) END,
Case When @RetailFirstPayDate IS NULL THEN NULL ELSE CONVERT (varchar,@RetailFirstPayDate,101) END ,
Case When @LeaseFirstPayDate IS NULL THEN NULL ELSE CONVERT (varchar,@LeaseFirstPayDate,101) END ,
Case When @DayToFirstPayment IS NULL THEN NULL ELSE CONVERT (varchar,@DayToFirstPayment,101) END ,
Case When @EntryDate IS NULL THEN NULL ELSE CONVERT (varchar,@EntryDate,101) END ,
Case When @DealBookDate IS NULL THEN NULL ELSE CONVERT (varchar,@DealBookDate,101) END ,
Case When @RealBookDate IS NULL THEN NULL ELSE CONVERT (varchar,@RealBookDate,101) END
declare @a varchar(10)
select @a= shiftstarttime from o_parameter
print @a
declare @b varchar(10)
select @b= shiftendtime from o_parameter
print @b
declare @dt varchar(20)
set @dt=Left(getdate(),12)
print @dt
declare @dt1 varchar(20)
set @dt1=Left(dateadd(dd, 1,getdate()),12)
print @dt1
declare @dt3 varchar(20)
set @dt3= @dt1 + space(0) + @a
print @dt3
declare @dt4 varchar(20)
set @dt4= @dt + space(0) + @b
print @dt4
output of above script is as fallow
09.30am
06.30pm
Aug 22 2007
Aug 23 2007
Aug 23 2007 09.30am
Aug 22 2007 06.30pm
now i want to convert @dt3 and @dt4 into datetime .
because i wnat to calculate datedifference in hours by using this function
SET @in_hour=DATEDIFF (HH ,@D1,@D2)
where @D1 and @D2 are datetime parameters.
but how can i get @dt3 and @dt4 into datetime so i can pass it to DATEDIFF() function.
so plz Guide me. or if u know how to write it then plz write here
i already use cast for it but it doesn't work.
so plz reply urgently.
I have a password column that needs to be converted from varchar to varbinary. Can anybody provide me a proper CONVERT statement syntax for it?
View 12 Replies View RelatedHi I have a varchar(8000) and currently XML files are stored in varchar(8000).Some times when i am doing manuplactions in my varchar column i am getting with special characters error. so now i want to keep my column varchar(MAX) and when i am doing calculations i will convert my varchar datatype to xml datatype. By doing this i hope there wont be any special character problems.
When i am doing calculations with the wellformed xml i am getting error for both convert and cast methods as below
I am trying to do convert(xml,MyVarcharColumn)
Implicit conversion from data type xml to nvarchar is not allowed. Use the CONVERT function to run this query.
Also i tried with casting and getting same problme. is there any way to convert
please suggest me
Thanks
Dilip
I'm trying to convert a column in my source table of datatype varchar(6) to a column of datatype int in my destination. I tried using the Derived Column/Data Conversion transformations but none of them worked. So, I tried using the following C# (credits to the original poster) and getting an error during compilation.
Note: "MyCol" is the Input Column I've specified in the Script Component and "CleanCol" is the Output column I've specified as datatype [DT_I4].
public override void Input0_ProcessInputRow(Input0Buffer Row)
{
int colOut = 0;
if (!Int32.TryParse(Row.MyCol, out colOut))
{
Row.CleanCol_IsNull = true;
} else {
Row.CleanCol = colOut;
}
}
The best overloaded method match for 'int.TryParse(string, out int)' has some invalid arguments
The other expression I've tried was:
ISNULL(MyCol) ? (dt_i4)"" : (dt_i4)MyCol
From the above code, you might have understood that the source field has some blank records as well in the MyCol field.
What is the best possible way to do the conversion from a String to Int or fixing the error from the above.
Need to know if the varchar datatype field will ingore leading zeros when compared with numeric datatype ?
create table #temp
(
code varchar(4) null,
id int not null
)
insert into #temp
[Code] .....
I have a table that contains a lot of demographic information. The data is usually small (<20 chars) but ocassionally needs to handle large values (250 chars). Right now its set up for varchar(max) and I don't think I want to do this.
How does varchar(max) store info differently from varchar(250)? Either way doesn't it have to hold the container information? So the word "Crackers" have 8 characters to it and information sayings its 8 characters long in both cases. This meaning its taking up same amount of space?
Also my concern will be running queries off of it, does a varchar(max) choke up queries because the fields cannot be properly analyzed? Is varchar(250) any better?
Should I just go with char(250) and watch my db size explode?
Usually the data that is 250 characters contain a lot of blank space that is removed using a SPROC so its not usually 250 characters for long.
Any insight to this would be appreciated.
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
Database is SQL Server 2000
I have a field in a table that stores date of birth. The field's datatype is char(6) and looks like this: 091703 (mmddyy). I want to convert this value to a datetime datatype.
What is the syntax to convert char(6) to datetime?
Thank you in advance.
Hello all I want to make a varchar datatype in sqlserver which does not accept numbers ( only letters will be accepted ) what is your suggetion ( I should mention that I use storedprocedures in my applications)
sincerely yours Mohsena
hello,
i am using varchar(max) for my column story
I have also tried nvarchar(max) but what is happening is where ever there is enter pressed in the story it stores text till that area only.
well presently iam entering data(copy paste) directly in my database.
later fnctionality will include online insertion of all the dta including stories. these stories are between 500-800 character.
how do i solve it
I have the following form in this adress:(it's framework 1.1 asp.net vb.net)http://admin.artemrede.pt/login.aspx?ReturnUrl=%2fdefault.aspxthe utilizador is: testepalavra passe is: 12345I'm using some text datatypes and some very big varchars the problem is that when you try to add a new record or to edit a existing record, if for example in one of the very big varchars or text, textboxes, several lines of text, It only puts in the database the 2 first words that you write. I used the VS debug and apparently everything looks ok......(if it would I probably hadn't this error....) Dim OurConnection As SqlConnectionOurConnection = New SqlConnection(conn_default)Dim OurCommand As SqlCommandOurCommand = New SqlCommand("Insert Into espectaculo (foto_destaque, thumb, area_prog, nome_espectaculo, coord, nome_comp, duracao, f_etaria, sinopse, iterancia, ficha, bio_interv, bio_comp, link_comp, notas_imprensa) Values (@fotod, @thumb, @areap, @ne, @coord, @nc, @duracao, @fe, @sinopse, @it, @ficha, @bioI, @bioC, @link, @notasp)", OurConnection)If (foto_destaque.Text = "") ThenOurCommand.Parameters.Add("@fotod", SqlDbType.VarChar, 12).Value = " "ElseOurCommand.Parameters.Add("@fotod", SqlDbType.VarChar, 12).Value = foto_destaque.TextEnd IfIf (thumb.Text = "") ThenOurCommand.Parameters.Add("@thumb", SqlDbType.VarChar, 12).Value = " "ElseOurCommand.Parameters.Add("@thumb", SqlDbType.VarChar, 12).Value = thumb.TextEnd IfIf (area_prog.Text = "") ThenOurCommand.Parameters.Add("@areap", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@areap", SqlDbType.VarChar, 50).Value = area_prog.TextEnd IfIf (nome_esp.Text = "") ThenOurCommand.Parameters.Add("@ne", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@ne", SqlDbType.VarChar, 100).Value = nome_esp.TextEnd IfIf (coord.Text = "") ThenOurCommand.Parameters.Add("@coord", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@coord", SqlDbType.VarChar, 100).Value = coord.TextEnd IfIf (nome_comp.Text = "") ThenOurCommand.Parameters.Add("@nc", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@nc", SqlDbType.VarChar, 50).Value = nome_comp.TextEnd IfIf (duracao.Text = "") ThenOurCommand.Parameters.Add("@duracao", SqlDbType.VarChar, 25).Value = " "ElseOurCommand.Parameters.Add("@duracao", SqlDbType.VarChar, 25).Value = duracao.TextEnd IfIf (faixa.Text = "") ThenOurCommand.Parameters.Add("@fe", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@fe", SqlDbType.VarChar, 50).Value = faixa.TextEnd IfIf (sinopse.Text = "") ThenOurCommand.Parameters.Add("@sinopse", SqlDbType.VarChar, 8000).Value = " "ElseOurCommand.Parameters.Add("@sinopse", SqlDbType.Text, 16).Value = sinopse.TextEnd IfIf (itener.Text = "") ThenOurCommand.Parameters.Add("@it", SqlDbType.VarChar, 200).Value = " "ElseOurCommand.Parameters.Add("@it", SqlDbType.VarChar, 200).Value = itener.TextEnd IfIf (ficha.Text = "") ThenOurCommand.Parameters.Add("@ficha", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@ficha", SqlDbType.Text, 16).Value = ficha.TextEnd IfIf (bio_interv.Text = "") ThenOurCommand.Parameters.Add("@bioI", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@bioI", SqlDbType.Text, 16).Value = bio_interv.TextEnd IfIf (bio_comp.Text = "") ThenOurCommand.Parameters.Add("@bioC", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@bioC", SqlDbType.Text, 16).Value = bio_comp.TextEnd IfIf (linkComp.Text = "") Or (linkComp.Text = "http://") ThenOurCommand.Parameters.Add("@link", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@link", SqlDbType.VarChar, 100).Value = linkComp.TextEnd IfIf (notas_press.Text = "") ThenOurCommand.Parameters.Add("@notasp", SqlDbType.VarChar, 5000).Value = " "ElseOurCommand.Parameters.Add("@notasp", SqlDbType.VarChar, 5000).Value = notas_press.TextEnd If OurConnection.Open()OurCommand.ExecuteNonQuery()OurConnection.Close()carrega()'grid1.DataBind()End IfEnd Sub Sub carrega()conn_default = ConfigurationSettings.AppSettings("ArtemredeConnection")Dim OurConnection As SqlConnectionOurConnection = New SqlConnection(conn_default)OurConnection.Open() Dim OurCommand As SqlCommandDim SelectCommand As StringSelectCommand = "select id_espectaculo, area_prog, nome_espectaculo, nome_comp from espectaculo"OurCommand = New SqlCommand(SelectCommand, OurConnection) Dim Select_DataAdapter As New SqlDataAdapter(OurCommand)Dim Select_DataSet As New DataSet'Dim SP_DataTable_Rowcount As IntegerSelect_DataAdapter.Fill(Select_DataSet, "Espectaculos")grid1.DataSource = Select_DataSetgrid1.DataBind()OurConnection.Close() End Sub
View 2 Replies View RelatedWhen creating tables:
If varchar expands according to how long the actual string is in each case, then why not set the varchar max characters very high, rather than be conservative about it?
For example, if you think your names will only ever be 30 chars you could set that column to varchar(30).But -- why not go ahead and set the column to varchar(100) anyway to be safe? Or is there some hidden storage cost to using 100 rather than 30 max chars?
We have few stored procedures that use nvarchar datatype, this was not issue on SQL server 7.0 but in 2000 becomes a big issue.
For example query that runs for 3 minutes in SQL server 2000 by replacing NVARCHAR to VARCHAR the same query runs for 2 seconds.
The biggest challenge that I have deals with tables and user-defined datatypes of NVARCHAR that has been bounded to the table.
How can I alter those without data corruption?
here is my code snippet
Session("matricN") = Trim(TextBox1.Text)
Dim txtValue As String
txtValue = Session("matricN")
da = New SqlDataAdapter("select MatricNumber,Name, Roles from Register where MatricNumber = " & txtValue, addRoleConn1)
MatricNumber is in varchar(50) datatype,, the errror says there is a syntax near "="
Hello,
I would like to change the datatype on a particular column from varchar to bigint across 100's of tables within a database.
I have the command ready which is:
ALTER TABLE tablename ALTER COLUMN columnname BIGINT
The problem happening is that it seems there are constraints across all the columns in every tables.
The error message is:
Server: Msg 5074, Level 16, State 1, Line 1
The object 'DF__tablename__columnname__0ABD916C' is dependent on column 'columnname'.
Server: Msg 4922, Level 16, State 1, Line 1
ALTER TABLE ALTER COLUMN columnname failed because one or more objects access this column.
I understand that if I delete this constraint, then it will let me modify the datatype of the column, but since there are tons of them and they are randomly named, how do I achive changing the datatype across multiple tables in bulk.
Why can varchar datatype variable only 4000 byte?
For example:
in a storedprocedure
declare @aa varchar(8000)
......
while
select @aa=@aa+@otherinfo
end
when the length is more than 4000 ,the data in the behind will be lost
Hi,
I have a excel file and i am trying to import zip codes to the database... but the some of the zip codes start with 06902 but the excel file treats them as float but i want to treat them as varchar...
How can i do it.
Regards
Karen
Hi,
Can anyone please help me with the syntax for this query please. Error is "syntax error converting varchar value '/' to a column of datatype int"
Query:
Code:
select iCalls_Calls.Call_ID,iCalls_Calls.Requestor,Type,Scope,iCalls_Calls.Status_ID,iCalls_Status.Status_I D,
iCalls_Status.Status_Label,((select Count(*) from iCalls_Events where Call_ID = " & Session("Call_ID") & " ) + ' /' + (
select Count(*) from iCalls_Events where Call_ID = "& Session("Call_ID") & " and Events_Flag <> 0)) as Countrec from
((iCalls_Calls inner join iCalls_Status on iCalls_Calls.Status_ID=iCalls_Status.Status_ID ) inner join iCalls_Users on
iCalls_Calls.Requestor=iCalls_Users.User_ID) left outer join iCalls_Messages on iCalls_Calls.Call_ID=iCalls_Messages.Call_ID where Requestor='" & Session("User_ID") & "' AND iCalls_Calls.Status_ID <> 6 order by iCalls_Calls.Call_ID
Thanks...
I am building a table change log that will track each attribute update and include the original and new values.
[BatchYearMonthKey] [int] NULL,
[BatchYearMonthDayKey] [int] NULL,
[AccountID] [varchar](200) NULL,
[Attribute] [varchar] (200) NULL,
[Old_ValueAtrDefault] [varchar] (200) NULL,
[New_ValueAtrDefault] [varchar] (200) NULL,
[Old_ValueAtrLong] [varchar] (max) NULL,
[New_ValueAtrLong] [varchar] (max) NULL
The challenge that the spectrum of varchar lengths across the table. I have one attribute that requires varchar(max) and all other attributes (about 40) are varchar (200).
I am trying to accomplish the following:
Account ID Status
1 Enabled
Now changed to
AccountID Status
1 Disabled
My log table will look like the following:
[BatchYearMonthKey] BatchYearMonthDayKey] [AccountID] [Attribute] [Old_ValueAtrDefault] [New_ValueAtrDefault] [Old_ValueAtrLong] [New_ValueAtrLong]
201504 20150409 1 Status Enabled Disabled NULL NULL
My question:
I created two fields (Old_ValueAtrLong and New_ValueAtrLong) dedicated for the one attribute that is a varchar (max). I was trying to avoid storing [Status] for example that's a varchar(200) in a field that is varchar(max). Is this the right approach? Or are there other recommendations in how to handle storing the data in the most efficient manner?
Getting error
Converting DataType forn Varchar to smalldatetime
when running a job (in SQL Server 2005 ) which calls a SP in the step...
this worked fine in SQL Server 7
the step is like this ....
exec spGet_Prism_Sales_History 'ABC', '2006-09-01', '2006-09-31', 1
Hi,
I am updating a remote table using linked server in sql server 2005.
but in case of varchar and nvarchar i am getting an error :
"OLE DB provider "SQLNCLI" for linked server "LinkedServer1" returned message "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Msg 16955, Level 16, State 2, Line 1
Could not create an acceptable cursor."
thanks in advance.
Thanks & Regards
Pintu
i have table tt.it contains two fields one is ttno int,doj datetime . i want toconvert to datetime to varchar .how it is .... give me some examples
View 3 Replies View Relatedi am running a package which extracts result of count(x), count(y),sum(z) from db2(as400) servers
i want to store the result of all the three in a table to a column of datatype varchar(25).
can someone help me with the convert/cast function in db2 which i can include in the query.
something like : select cast(count(x) as varchar(25)) from lib.file
Hi All:
I am new to Sql 2000 database,Now I'm planing to create a table in my databse,my table included below fields like this :
PoNo(the length is 15 characters) ,Supplier Name(the length is 50 characters).etc
but I don't how to select the datatype for them. should I select Char or VarChar ?
which one is the best slection ?
thans in advanced!
Hi all,
There are several columns called enabled with a char datatype in my database. One enabled column per table. These columns either have a value of T or F (true or false), depending on whether they're enabled or not. I want to change these columns to a bit datatype and insert the relevant value of true or false...
I guess the best way to do this is to add a new column to a table with a bit datatype, and based on the value in the current enabled column, insert TRUE or FALSE.
Anyone ideas on the best way to accomplish this?
Thanks.
When i do this statement:insert into table (cost) values ('2')cost column is a bigint datatype.will it auto convert the string 2 into integer 2???
View 1 Replies View RelatedI have a number of bit datatypes ( Boat types: Cruiser, Sportfisher, Megayacht, Sailboat) that I would like to place in a text box and do away with the individual selections. For instance, some marinas cater to "Cruiser", "Megayacht" and "Sailboat" while others include the "Sportfisher" also and there are many other combinations of vessels. I am stumped at how to write a query that takes the existing "True" values for each boat type and places them in a text box in the form of
" Cruisers, Megayachts, Sailboats" .
Thanks in advance for possible solutions.
Hi,
I read the topic from JROdden and this case is similiar but...
I got several varchar fields with
values like
1.2
1.3
... these I can covert with
select CONVERT(dec(5,2), fieldname) as fieldname
In fact I also solved undefined- and NULL-values with.
CONVERT(decimal(12, 2), CASE WHEN GESCHKOSTMAX IS NULL OR
GESCHKOSTMAX < '0' THEN '0' ELSE GESCHKOSTMAX END) as GESCHKOSTMAX,
But now there are values like
1,4 and these ones neither CONVERT nor CAST will handle.
I tried the
SELECT DISTINCT KMPAUSCHALE
FROM extr_INTFIRMA
WHERE (isnumeric(KMPAUSCHALE) = 1)
and get
0,40
0.25
0.30 and so on...
The error is:
[Microsoft][ODBC SQL Driver][SQL Server]Error converting datatype varchar to decimal. (or float or numeric (whatever I tried))
I think the easiest way would be to insist on higher data quality but
I also would like to solve this interesting challenge.
Thanks for any hints
By the way, I followed rudys link to
http://rudy.ca/afdb.html
and now I know how I could protect myself !!!!
There must be a voice in my head saying:
Try the db-forum, try it and stay happy... ;-)
best regards and have fun with new year eve.
Michael