How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red  - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red  - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green   pen       2    0    1   marker    0    1    0   pencil      1    3    0   highlighter  1    1    1Â
We tried Sum but not able to display in single row.
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501 SELECT 1,2,3,4,'CurrentSetting' FROM TableA ta WHERE tblid = @tblid UNION SELECT 1,2,3,4,'PreviosSetting' FROM Tableb tb WHERE tblid = @tblid
I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:
check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where h.freight_wagon_serial_number = fw.freight_wagon_serial_number and fw.freight_wagon_type = fwt.freight_wagon_type and h.train_number = t.train_number) < (select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))
The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.
I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.
I have this bit of code below and would like to bring back stat_code's which have no value as 0...
select stat_code, COUNT(stat_code)AS Stat_Count --INTO tableSroStatABD from fs_sro where sro_stat ='O' and whse = 'ABD' group by stat_code having stat_code in ('1 QUOTE WN', '2 PR & DEF', '2.1 PRTORD', '3 PRTS AVL', '4 SCHEDULD', '5 LABB JBC', '6 CSTB JBC', '7 WRKS CMP', '8 CSH APP', '9 TO B INV') order by stat_code asc
I am trying to create totals of the different values of a certain expression in the Report Footer. Currently I have the expression in a group which gives me a running subtotal of the 4 different values of the expression. Now I need 4 running Totals of the 4 different value subtotals. I tried placing some code in the Report Properties but I had a hard time trying to code visual basic within the editor.
I need a query to return two values. One will be the total units and the other will be total unique units. See exmaple data below. It does not have to be one query. This will be in SP, so I can keep it seperate if I have to.
Total Units = 7 - easy to do by using count() Total unique units = 4 - I cannot use group by as it would return multiple results for each unit, which is not what we want.
Hello,Thanks for helping me with this... I really appreciate it.I have a table called tblPatientDemographics with a number of columns.I would like to count the number of NULL values per record within mytable.tblPatientDemographicsPatientID Age Weight Height Race1234567 20 155 <NULL> Caucasian8912345 21 <NULL> <NULL> <NULL>In the first example above I want to display '1'In the second example above I want to display '3'Any help would be very much appreciated.Thanks !Chad*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
Here is my dataset used by my report definition. The combo of barcode and order id is unique. The 'isDiscountedItem' field indicates if the customer used a coupon to purchased an item at a lower price.
I want to group my report by department id, class id and barcode. Then, I want to count all distinct order ids for which there was at leat one discounted item.
My report would produce the following output considering the above dataset:
Merchandise Number of customers who used a coupon -------------------------------------------------------------------------------------------------------------- Department 1 2
Class 1 2
Barcode 123 2 Barcode 789 1 Department 2 0
Class 7 0
Barcode 456 0
I've been looking at a possible solution using hash tables defined in the report code but I would like to find a 'cleaner' solution. Any help would be appreciated.
select a.Assignment_UniqueID as DeploymentID, a.AssignmentName as DeploymentName, a.StartTime as Available, a.EnforcementDeadline as Deadline, sn.StateName as LastEnforcementState,-----Required Column
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
I joined different tables and got a result like this:
result | process | goal | date | ------- ---------- ------ ----------- ok | process4 | 1 | 12.10.2013 bad | process1 | 2 | 13.10.2013 ok | process1 | 4 | 12.12.2013 good | process4 | 1 | 03.01.2014 ok | process1 | 3 | 10.04.2013 bad | process3 | 6 | 09.01.2014 bad | process4 | 3 | 30.12.2013 best |NULL| NULL
Now I want to count the results by counting the processes and group them by the result.
But it should be count the latest result per process only, e.g. for goal "1" just "good" at 03.01.2014. I solved that with a subquery (date=SELECT MAX(...)..).
But now the result "best" disappears, because that column has no date.
Secondly I want to count results for a specific process, e.g. for process4. Every goal has max. one process, with different dates. But one process could have more than one goal.
I want to have this result for process4:
count | result ------ ------- 1 | good 1 | bad 0 | ok 0 | best
But I got only:
count | result ------ ------- 1 | good 1 | bad
I have tried a lot, but nothing works.
The whole result (best, good, ok, bad) are stored in an other table and I joined it.
I'd like to limit my query results to only items that match any part of a dynamic csv string table but am having some trouble (postgres SQL). Details: I need to calculate how many hours our staff spends seeing clients. Each staff has different appointments that can count toward this. The specified appointments for each staff are listed as comma separated values. My existing query calculates the appointment hours for each staff in a given time period.
However, I need limiting my query to only include specified activities for each staff. My current where clause uses IN to compare the appointment (i.e. activity) listed in the staff's schedule with what is listed an an approved appointment type (i.e. performance target activity). The query runs but it seems to only count one of the activities listed in the csv rather then count all the activities that match with the csv.
select (sum (kept)/60) from (select distinct rpt_scheduled_activities.staff_id as sid, rpt_scheduled_activities.service_date, rpt_scheduled_activities.client_id, from rpt_scheduled_activities inner join rpt_staff_performance_target on rpt_scheduled_activities.staff_id = rpt_staff_performance_target.staff_id where
Code Snippet CREATE TABLE #Lkp_Circle ( ID INT , Abbreviation varchar(50) ) GO CREATE TABLE #Lkp_OtherCircles ( Circle varchar(50) ) GO CREATE TABLE #Tbl_User ( ID INT, Name VARCHAR(50), IsActive bit ) GO CREATE TABLE #Tbl_UserDetails ( AssociateID INT, CircleID INT ) GO INSERT INTO #Lkp_Circle VALUES (1,'C1') INSERT INTO #Lkp_Circle VALUES (2,'C2') INSERT INTO #Lkp_Circle VALUES (3,'C3') INSERT INTO #Lkp_Circle VALUES (4,'C4') INSERT INTO #Lkp_Circle VALUES (5,'C5') INSERT INTO #Lkp_Circle VALUES (6,'C6') INSERT INTO #Lkp_Circle VALUES (7,'C7') GO INSERT INTO #Lkp_OtherCircles VALUES ('C3') INSERT INTO #Lkp_OtherCircles VALUES ('C4') INSERT INTO #Lkp_OtherCircles VALUES ('C5') INSERT INTO #Lkp_OtherCircles VALUES ('C6') GO INSERT INTO #Tbl_User VALUES ( 101,'U 1','True') INSERT INTO #Tbl_User VALUES ( 102,'U 2','True') INSERT INTO #Tbl_User VALUES ( 103,'U 3','True') INSERT INTO #Tbl_User VALUES ( 104,'U 4','True') INSERT INTO #Tbl_User VALUES ( 105,'U 5','True') GO INSERT INTO #Tbl_UserDetails VALUES(101,3) INSERT INTO #Tbl_UserDetails VALUES(102,4) INSERT INTO #Tbl_UserDetails VALUES(103,5) INSERT INTO #Tbl_UserDetails VALUES(104,5) INSERT INTO #Tbl_UserDetails VALUES(105,3) GO
SELECT ISNULL(Circle,'Total') Circle, ISNULL(COUNT([HeadCount]),SUM(1)) AS [Total] FROM ( SELECT DISTINCT 'Circle' = CASE WHEN #Lkp_Circle.Abbreviation IN (SELECT Circle FROM #Lkp_OtherCircles) THEN #Lkp_Circle.Abbreviation WHEN #Lkp_Circle.Abbreviation NOT IN (SELECT Circle FROM #Lkp_OtherCircles) THEN 'Others' ELSE 'Total' END,ISNULL(#Tbl_UserDetails.AssociateID,0) AS 'HeadCount' FROM #Tbl_User INNER JOIN #Tbl_UserDetails ON #Tbl_User.ID = #Tbl_UserDetails.AssociateID INNER JOIN #Lkp_Circle ON #Tbl_UserDetails.CircleID = #Lkp_Circle.ID WHERE #Tbl_User.IsActive='True' AND #Tbl_User.ID>0 AND #Tbl_UserDetails.AssociateID>0 ) AS PivotTable GROUP BY Circle WITH Cube
DROP TABLE #Tbl_User,#Tbl_UserDetails,#Lkp_Circle,#Lkp_OtherCircles
The criteria for Others is that those circles which are not part of #Lkp_OtherCircles i.e. C1,C2,C3 and C7 clubbed together. I have tried checking for the condition ISNULL when for that circle there is no user but the end result is same. Can someone tell me where I am going wrong and how to correct it?
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process: 1. get data from an existing view and insert in temptable 2. truncate/delete contents of table1 3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted) 4. insert data in table2 which are not yet present (comparing ID in t2 and temptable) 5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I have a DB of professors and information related with them. I created the cube, it consist of: Measures: Measure group Professors: Amount of projects (COUNT proj_id) Amount of pulications (COUNT pub_id) Amount of e_books (COUNT book_id) -------------- Measure group Projects: Distinct amount of projects (DISTINCT COUNT proj_id) -------------- Measure group Publications: Distinct amount of publications (DISTINCT COUNT pub_id) -------------- Measure group E_books: Distinct amount of e_books (DISTINCT COUNT book_id) -------------- Calculated measures: Amnt_Projects iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects]) Amnt_Publications (similar to the above one) Amnt_E_books (similar to the above one) --------------------------- Dimensions: dimPROFESSORS - prof_id -surname -name -gender dimPROJECTS - proj_id -type name -name dimPUBLICATIONS - pub_id -type name -name dimE_BOOKS - book_id -name Date_Projects -date_id -years Date_Publications -date_id -years Date_E_books -date_id -years
For example, when I browse the cube: prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects 1032------------------- 30 --------------------------1----------------1 1070-------------------90 --------------------------2----------------2 1111-------------------0 ---------------------------1----------------0 1137-------------------0 ---------------------------1----------------0 1234-------------------1404--------------------------9----------------9 1721-------------------504--------------------------7----------------7 2661-------------------85 --------------------------5----------------5 ...--------------------...---------------------------...----------------... 6999------------------- 20---------------------------1-----------------1 9956-------------------50---------------------------5-----------------5 Unknown----------------(empty)---------------------(empty)-----------0 Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of: Measures: Measure group Professors: Amount of projects (COUNT proj_id) Amount of publications (COUNT pub_id) Amount of e_books (COUNT book_id) -------------- Measure group Projects: Distinct amount of projects (DISTINCT COUNT proj_id) -------------- Measure group Publications: Distinct amount of publications (DISTINCT COUNT pub_id) -------------- Measure group E_books: Distinct amount of e_books (DISTINCT COUNT book_id) Calculated measures: Amnt_Projects iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects]) Amnt_Publications (similar to the above one) Amnt_E_books (similar to the above one) --------------------------- Dimensions: dimPROFESSORS - prof_id -surname -name -gender dimPROJECTS - proj_id -type name -name dimPUBLICATIONS - pub_id -type name -name dimE_BOOKS - book_id -name Date_Projects -date_id -years Date_Publications -date_id -years Date_E_books -date_id -years
For example, when I browse the cube: prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects 1032------------------- 30 --------------------------1----------------1 1070-------------------90 --------------------------2----------------2 1111-------------------0 ---------------------------1----------------0 1137-------------------0 ---------------------------1----------------0 1234-------------------1404--------------------------9----------------9 1721-------------------504--------------------------7----------------7 2661-------------------85 --------------------------5----------------5 ...--------------------...---------------------------...----------------... 6999------------------- 20---------------------------1-----------------1 9956-------------------50---------------------------5-----------------5 Unknown----------------(empty)---------------------(empty)-----------0 Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
How do I count the number of positive dollar values in a query? I have various negative and positive dollar values and want to count how many positive I have then I will know how many are negative. I cannot put >0 or >0.00 in the where because it still returns everything cuz the programmer set the datatype to be money
My data is like below:  ClassId ClassName  StudentId  Subject    SubjectId 1        ESL       12        English     20 1        ESL       13        Science     30 1        ESL       12        Social      40 1        ESL       12        Maths       50  Required output: parameters are Subject column valuesÂ
ClassId ClassName  TotalStudents  SubjectIds   1       ESL              1              20, 40, 50 1       ESL                     1              30  When one student takes multiple subjects then count student only once, so in the above data 12 is one student id takes multiple subjects so counted only once. TotalStudents value is 1  I did write below query:  Declare @subjectids string set @subjectids = '20,30,40,50'Â
-- will split @subjectids and store in temp table   Â
select classname, classid, Count(Distinct StudentId) from mytable where SubjectsIds in @subjectIds group by ClassId, ClassName, SubjectId,  but it gives me below output:  Â
ClassId ClassName  TotalStudents  SubjectIds  1       ESL        1              20 1       ESL        1              30 1       ESL        1              40 1       ESL        1              50Â
I am trying to count a column field in a single table and return two count values as one record set using group by.
field1 = group by (department) nvarachar field2 = count (closed) datetime
I have tried using derived tables with no luck getting the desired result.
field2 is a datetime field as indicated I want a count for two conditions
1. WHERE field2 is null 2. WHERE field2 is not null
End Results would like this ====== Department | OpenItems | ClosedItems Department1 | 32 | 24 Departmnet2 | 87 | 46 Department3 | 42 | 76
=======
I got it *almost* working with derived tables, but the group by function was not putting the department as one single row. I was getting multiple rows for departments.
I realize this is probably a simple answer and I am making this a lot harder than it actually is....
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
Gurus, I have two list boxes, user can move items back n forth, from second listbox I am inserting values into a table. So far everything is working fine. Now I want to delete all the existing values from the table before inserting evertime..Please help me in this I dont know what to do. thanks kalloo
I'm trying to checking my production table table_a against a working table table_b (which i'm downlading data to)Here are the collumns i have in table_a and table_bDescription | FundID (this is not my PK) | Money I'm running an update if there is already vaule in the money collumn. I check to see if table_a matches table_b...if not i update table a with table b's value where FundID match up.What i'm having trouble on is if there is no record in table_a but there is a record in table_b. How can I insert that record into table_a? I would like to do all of this (the update and insert statement in one stored proc. if possible. )If anyone has this answer please let me know.Thanks,RB
Please be easy on me...I haven't touched SQL for a year. Why given;
Code Snippet USE [Patients] GO /****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[Patients]( [PID] [int] IDENTITY(1,1) NOT NULL, [ID] [varchar](50) NULL, [FirstName] [nvarchar](50) NULL, [LastName] [nvarchar](50) NULL, [DOB] [datetime] NULL, CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED ( [PID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO SET ANSI_PADDING OFF
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
