I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
I have a problem, i am upgrading a system that uses Oracle databases for using SQL Server 2005 databases. The thing is that the operator (+) (involved in many queries) is from Oracle and operators(*= and =*) are not supported in SQL Server 2005 (and not comply with the Ansi standard) i need help translating these queries. An example would be like this:
SELECT ...
FROM IBA_MPACCIONESXREQ, IBA_MPPERMISOS, IBA_MPENTIDADES, IBA_MPREQUERIMIENTOS, IBA_MPPROCEDENCIAS, IBA_LOCALIZACIONES, IBA_MPPROCEDXLOC, IBA_USUARIOS
WHERE IBA_LOCALIZACIONES.ID_LOCACLIZACION = IBA_MPPROCEDXLOC.ID_LOCACLIZACION AND IBA_MPPROCEDENCIAS.IDPROCEDENCIA = IBA_MPPROCEDXLOC.IDPROCEDENCIA AND IBA_MPREQUERIMIENTOS.IDPROCEDENCIALOCALIZACION = IBA_MPPROCEDXLOC.IDPROCEDENCIALOCALIZACION AND IBA_MPENTIDADES.IDENTIDAD (+) = IBA_MPPROCEDXLOC.IDENTIDAD
AND IBA_MPPERMISOS.IDPERMISO (+) = IBA_MPPROCEDXLOC.IDPERMISO AND IBA_MPACCIONESXREQ.IDREQUERIMIENTO = IBA_MPREQUERIMIENTOS.IDREQUERIMIENTO AND IBA_MPACCIONESXREQ.USERNAME = IBA_USUARIOS.USERNAME
ORDER BY ...
I didnt include the SELECT and ORDER BY text because i dont think its important. Also i know that you have to move the outer joins to the FROM clause but i didnt manag to get it. Could you help me? thank you in advance.
I have designed a database on a SQLServer Express. When I am going to backup it, I provide a filename like as "c:/test.bak" but when executing I recieve a message that SQLServer cannot open the backup device with the name above.
I would like to run some queries on two tables that reside in two different database (located on the same server). The databases are both MS SQL 2000.How do I create a database link (or a table link??) so that I can create the queries from the Enterprise Manager or the Query Analyzer? Thanks a lot, Christian
I want to create link with 2 servers is that possible to do that. for example is like this, ---------------------------------------------------------------------------------------------------------------- SELECT Products.ProductID, Products.ProductName, Products.CategoryID, Categories.CategoryName FROM [SERVER1].[Northwind].[dbo].[Products] INNER JOIN [SERVER2].[Northwind].[dbo].[Categories] ON [Products].[CategoryID] = [Categories].[CategoryID]
HI.. I have two database one on my local system and othe on remote .but this time both are on local system . Now i want to transfer some data from my local database to remote one . so for that reason i want to use Link server But I am unable to create that and use it . both database are on SQL 2005.
And I am not sure about link server whether it can solve or no.
Give me some link and some details information about the use .in asp.net with c#.
sql commmand i have used to createthe link server
USE [webvidya]; GO EXEC sp_addlinkedserver 'dsd', N'SQL Server' GO SELECT * FROM [vidya].[ASPNET].[db_owner].[institute]
Im writing a program in ASP language which it is using SQL Server for database.
I want to know how to create a link between fields of two tables. For example: I have a table named: Projects containing: p_name status date member1 member2
and another table named results containing: p_name s_status status1 status2
I want to create a link between field s_status of STATUS table and field status of table Projects
Users are sending data to table projects, when a user send some data to status of projects, I want this link to send data from status in project to s_status of results.
I have a column of data on my report that contains an email address. Is it possible to format this so that the person running the report can just click on the link and have that action launch their email program...like Outlook?
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29534 Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007 <Func Name='ComponentUpgradeInstall'> <Func Name='ComponentUpgrade'> Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007 Failed to start service MSSQLSERVER. Error code 2148081668 Service failed unexpectedly (2148081668) Error Code: -2146885628 Windows Error Text: Cannot find object or property. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls::Service::Start Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation. 2007-03-18 19:46:11.51 Server All rights reserved. 2007-03-18 19:46:11.53 Server Server process ID is 796. 2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY. 2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required. 2007-03-18 19:46:11.53 Server Registry startup parameters: 2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required. 2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server. 2007-03-18 19:46:14.07 spid5s Starting up database 'master'. 2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa". 2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'. 2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid9s Starting up database 'model'. 2007-03-18 19:46:15.06 spid9s Clearing tempdb database. 2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'. 2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured. 2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured. 2007-03-18 19:46:15.82 spid12s Service Broker manager has started. 2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid. 2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1. 2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1. 2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3. 2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
The operation system is windows xp, and before i installed the SQL SERVER2005 the SQL SERVER2000 had installed. the course of installing the SQL SERVER2005 has no error at all. but i can not find the Database Engine under MSSQLSERVER from surface area configuration ============== thank you in advance for any help
hi experts, acutually i had configured the online application in my local pc..when i try to configure the database , it seems to be a vc++ intellisense database file(.ncb extension)..Actually i am working on ms sqlserver..i don't know how to open the vc++ database in mssqlserver...pls help me.. regards senthil.d
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
Is it possible to use database links on MS SQL-Server 2000, like on Oracle? If its possibe, what is the syntax and can i create a database link from Microsoft SQL Server 2000 to Oracle?
I am working on a databse on my local box, my source data is onanother. How can I link the database and table from one server toanother? Currently I am using DTS to just transfer the records!
I'm looking for a possible way to access tables from SAP but in another database. This is not possible using ABAP from SAP. Therefore I wonder if it's possible to define some kind of virtual table in a database which in fact refers to a table in another MSSQL database...
Hello all, I have a quick question. Is it possible to create linked tables in MS SQL, similar to the was MS Access does?
I have a new application(x) that is going to be dependant on another application(y). I just want to link 5 or 6 tables from y into x for the purpose of not duplicating information. Is this possible?
I apologize if I seem a little lacking in the knowledge of MS SQL, I am new to it and trying to figure it out. Any help would be greatly appreciated.
We are looking for a way to have sales data to flow from 1 database to another database on same SQL server. Can we build or have a link between 2 database? If yes, how to and how much effort will that be?
Hello All, I have a question on linking tables with SQL Server. I have SQL Server 2000 with database A on machine A. I have SQL Server 2000 with database B on machine B. I want to link tables from the database on machine A into a database on machine B. I am not quite sure how to do this - I believe this can be done as I have seen it before. Any information and or resources to direct me to would be greatly appreciated.
We have lookup tables we share on 6 database servers. We keep copying these very large tables to every database we use on each server, obviously a great waste of space. We don't mind copying these tables onto each of the servers but we want to be able to link to these tables from each database from within our servers. How is this done? Thanks in advance.
Hi all, i'm new here. plz help me solve this question. i want to know how the login component that already have at visual studio, link with the database i created? what i mean is..when an user1 had login to the page, then it will show user1 database at the page..i dunno how to link the database tat created automatically(asp.net configuration) with my own database created.. izit using stored procedure? can i have some example or guide how to do tat from you all? mayb this is a noob question..but can u all help me? thx...
We have instaled Sql Server 2000 Standard Sp4, whit a Nortel Product. That aplication make to gestion calls using MSQL2000; in some moment the DB stoping and the Reason is "[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Arithmetic overflow error for data type smallint, value = 33459."
I am getting an error trying to select data from a Linked Server that is connected to a secured MS Access database. I have entered the login and password for an admin in the sytem but I am still getting the error below. It seems that all of the examples shown on the Online help are for unsecured databases. Can anyone help me with this issue?
Thanks
Will
SELECT * FROM TMS_SECURED...Assignments
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TMS_SECURED" returned message "You do not have the necessary permissions to use the '\FileSrv-05ProductionTMSTMS-DATA.mdb' object. Have your system administrator or the person who created this object establish the appropriate permissions for you.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TMS_SECURED".
Dear all, I face a problem about linking the SQL express database. Originally, I work with my desktop at home. However, I need to take it outside with my laptop. Once I copy whole project to my laptop and use Visual Studio 2008 again to develop. The following message appear when I run some pages that need to connect the database: "An attempt to attach an auto-named database for file E:d drivedocAssignmentProgramming ProjectProgrammingSourceApp_DataASPNETDB.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. " How can I solve this problem? I think it is an absoultue address and logical address problem. Thanks a lot. Regards, Eric Chan
Hi There,Being quite new to MS-SQL I would like to ask if there is a general opinionof what approach should be taken to storing things like external documentsand images in databases.Should the actual files be stored within the database, or instead shouldlinks to the files on a file server or something similar be stored instead.For the end user I imagine it is easier to have everything stored within thedatabase, because doing it the other way in effect gives another level ofmanagement because there is the need to perhaps manually look after the fileserver with all the image files or document files on.In my particular case, I am building a database where the users use a greatmany Word documents. For example, I particular record might have a number ofdifferent Word documents associated with it.I was going to create a "Documents" table that all documents were stored in(including meta data about each document because it will be really useful tobe able to search for documents so that they can be reused).In this table I was in a dilemma as to whether to actually store thedocuments in the table. Other then the performance hit and memoryrequirements this will require, are there any other disadvantages?What are the general thoughts when a database needs to manage a lot of pdfand word documents?Thanks in advance.Dave.
Hi All, I have recently moved jobs. From my last job I created a holiday database for the organisation, than I copied it on a storage device. Now, in my new job I would like to use same database. But the problem is most of the tables were linked. I know I can convert linked tables to local tables and I have tried it but it asks me for the new location with the same table names. Can some one please helpppppppppppppppppppppppppppppppppp I as I am really very desperate.
