I have just one table but need to create a trigger that takes place after an update on the Orders table. I need it to multiply two columns and populate the 3rd column (total cost) with the result as so:
I'm getting this error when I try to use "inserted" table in my create trigger call.
--------------------------- Microsoft Development Environment --------------------------- ADO error: The column prefix 'inserted' does not match with a table name or alias name used in the query.
--------------------------- OK Help ---------------------------
I'm getting this error when I try to use "inserted" table in my create trigger call.
--------------------------- Microsoft Development Environment --------------------------- ADO error: The column prefix 'inserted' does not match with a table name or alias name used in the query.
--------------------------- OK Help ---------------------------
I have never used triggers before and I have tried to solve one problem. If I have the column "currency" in a table and want to make sure that the entered value i valid in relation to another table that contains valid currency formats, I did it like this:
--------------------------------- CREATE TRIGGER [trigger_checkCurrency] ON [dbo].[Client] FOR INSERT, UPDATE AS declare @currency as char(50) declare @country as char(50)
declare cur cursor for SELECT currency, country FROMinserted
OPEN cur fetch cur into @currency, @country WHILE @@FETCH_STATUS = 0 BEGIN if not exists(select * from listinfoid where listname = 'currency' and listid = @currency) begin set @currency = (cast(@currency as varchar (3)) + ' is not a valid currency') CLOSE cur DEALLOCATE cur RAISERROR (@currency,16,-1) with log return end if not exists(select * from listinfoid where listname = 'country' and listid = @country) begin set @country = (cast(@country as varchar (3)) + ' is not a valid contry') CLOSE cur DEALLOCATE cur RAISERROR (@country,16,-1) with log return end else fetch cur into @currency, @country
END CLOSE cur DEALLOCATE cur update Client set currency = UPPER(currency), country = UPPER(country) ---------------------------------
I use a cursor to handle multiple rows in an update query. (SQL2000-server)
Is there an easier och better way to do this? I´m a bit unsure of this code.
how to do this i have table of employee ,evry employee have a unique ID "empid" empid VAL_OK -------------------------- 111 0 222 0 333 0
now insert multiple insert to my work_table shifts for all month for evry employee like this (this is work_table) empid date val -------------------------------------------------- 111 01/02/2008 1 111 02/02/2008 2 ............... 111 29/02/2008 5 --next employee 222 01/02/2008 1 222 02/02/2008 4 ............... 222 29/02/2008 6 --next employee 333 --next employee 444 --next employee 555 -------------------------------------------------------------
now i need for evry OK insert (for all month) each employee go to the TB_Employee and update each employee once !! from VAL_OK=0 to VAL_OK=1 like this
empid VAL_OK -------------------------- 111 1 222 1 333 1 ---------------------- like this i know who is the employee have shift for all month and who NOT !
i think it like this
Code Snippet Create trigger for_insert on tb_work For insert begin if @@rowcount = 1 Update tb_employee Set val_ok= 1
else /* when @@rowcount is greater than 1, use a group by clause */ Update tb_employee set val_ok= 1 select empid from tb_work group by tb_work.empid
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However I€™m not sure how to increment the ID in table 2 or to update only the row that has been inserted.
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger on a for insert as insert into b(ID)
Hiim trying to implement a simple trigger, i had it working fine in oracle but am finding it difficult to convert it to the MS SQL 2005 layout.I have two tables:1) don (columns A,B,C)2) cur (columns A,B)Basically i just want to insert the value of A and B from table don into table cur after an insert.this is what i have:________________________________ALTER TRIGGER [TG_doncur] ON don AFTER INSERTAS BEGININSERT curSET A = A, B=BEND_______________________________i have an if clause aswell but i just wanna get the basics first.any help would be greatBil
I am looking at a table in Microsoft SQL Server. I went to thedependencies of this table and it says TRIG_customer. so i amthinking there is a trigger that affects the table but how do i seewhat is the code that resides within this trigger. I looked among thestored procedures but i couldnt find this trigger.are all the triggers listed together somewhere. where is this triggernamed TRIG_customer?thanks in advance
I do not know if I am in the proper thread, if not thnaks to let me know where to post it..
I have a runing table name CURENTALARM which strore different alarm information. This table has a Column named STATUS.. When the new inserted rows ocurrs and STATUS =1, then I need to copy that row in a new table name STATUSLOG...
For that I have created a trigger for table CURENTALARM and then do proper commands to insert to other table.
I am using the inserted table in my trigger to fetch last inserted rows.
The question I have is that how to guaranty that each inserted row will fire the triggers properly... What I mean is that in case I have 2 rows which gets inserted within less than a second in time interval, does the triggers will be able to do its job and proceed properly inserted row or is there a situation that when rows gets inserted too fast, the triger might miss some of them ?
Hi all, I have a problem with this trigger. It seams to be very simple, but it doesn't work...
I created a trigger on a table and I would want that this one updates a field of a table on a diffrent DB (Intranet). When I test it normally (a real situation), it doesn't work, but when I do an explicit update ("UPDATE AccesCard SET LastMove = getDate();" by example) it works.
If anyone could help me, I would appreciate.
NB: Is there a special way, in a trigger, to update a table when the table to update is on another BD ?
Francois
This is the trigger: ------------------------------------------------------------
ALTER TRIGGER UStatus ON AccesCard AFTER UPDATE, INSERT AS
DECLARE @noPerson int
SET NOCOUNT OFF
IF UPDATE(LastMove) BEGIN SELECT @noPerson = Person FROM INSERTED UPDATE Intranet.dbo._Users SET Intranet.dbo._Users.status = 1 WHERE personNo = @noPerson; END
Suppose also that the ACTIVITY table is already populated with several records, say with activity_id = 1, 2, and 3.
OBJECTIVE: When a new member record is added to MEMBER, say member_id 10, insert one record in the HEADCOUNT table for EACH activity in ACTIVITY for that member. Thus, if member #10 is added to MEMBER, then the trigger (or some other mechanism) would add the following records to HEADCOUNT (which, say, already has 30 records):
I've been advised that a trigger should do the trick for this, but as I'm totally new to SQL, I'll need some help. I'm guessing some iterating SQL command language might be required, but as I'm new to SQL, I don't know how to proceed.
Note that I'm building an ASP.NET application based on VB, and so records will be added to MEMBER through a tableadapter INSERT command. (Though I suspect this has no bearing on trigger behavior.)
Hi,We have been using ADO and the AddNew method for a long time as a meansto add records to the database. It has always worked fine - no problem.But - we recently started using INSERT triggers that simply call a fewstored procs (they're actually SSNS stored procs that send new eventinfo to notification services). Anyway, these triggers do not seem tofire at all! If I execute an insert command manually from QueryAnalyser, no problems. But the trigger does not fire at all from myapplication!Does anyone know why this could be? For info, my connection string usedby the ADO connection object looks like this: Provider=SQLOLEDB.1;DataSource=XXX;Initial Catalog=YYYAnd my AddRecord ADO code looks like this:With rs.Open sSQL, ConnectionString, adOpenKeyset, adLockOptimistic,adCmdTable And adExecuteNoRecords.AddNewAm I mnissing something obvious here? Any help appreciated!
Hello,I am trying to learn SQL Server. I need to write a trigger whichdeletes positions of the document depending on the movement type.Here's my code:set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoCREATE TRIGGER [DeleteDocument]ON [dbo].[Documents]AFTER DELETEASBEGIN-- SET NOCOUNT ON added to prevent extra result sets from-- interfering with SELECT statements.SET NOCOUNT ON;IF Documenty.Movement = 'PZ' OR Documents.Movement = 'ZW'DELETE FROM PositionsPZZWWHERE Documents.Number IN (SELECT Number FROM deleted);IF Documents.Movement = 'WZ' OR Documents.Movement = 'RW'DELETE FROM PositionsWZRWWHERE Documents.Number IN (SELECT Number FROM deleted);IF Documents.Ruch = 'MM'DELETE FROM PositionsMMWHERE Documents.Number IN (SELECT Number FROM deleted);ENDUnfortunatelly I receive errors which I don't understand:Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 12The multi-part identifier "Documents.Movement" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 12The multi-part identifier "Documents.Movement" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 13The multi-part identifier "Documents.Numer" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 15The multi-part identifier "Documents.Movement" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 15The multi-part identifier "Documents.Movement" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 16The multi-part identifier "Documents.Number" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 18The multi-part identifier "Documents.Movement" could not be bound.Msg 4104, Level 16, State 1, Procedure DeleteDocument, Line 19The multi-part identifier "Dokuments.Number" could not be bound.Please help to correct the code.Thank you very much!/RAM/
I am extremely new at SQL Server2000 and t-sql and I'm looking tocreate a simple trigger. For explanation sake, let's say I have 3columns in one table ... Col_1, Col_2 and Col_3. The data type forCol_1 and Col_2 are bit and Col_3 is char. I want to set a trigger onCol_2 to compare Col_1 to Col_2 when Col_2 is updated and if they'rethe same, set the value on Col_3 to "Completed". Can someone pleasehelp me?Thanks,Justin
I've this tableCREATE TABLE [dbo].[Attivita]( [IDAttivita] [int] IDENTITY(1,1) NOT NULL, [IDOwner] [int] NULL, [IDAttivitaStato] [varchar](1) COLLATE Latin1_General_CI_AS NULL, [IDAttivitaTipo] [varchar](2) COLLATE Latin1_General_CI_AS NULL, [IDAnagrafica] [int] NULL, [Data] [datetime] NULL CONSTRAINT [DF_Attivita_Data] DEFAULT (getdate()), [Descrizione] [varchar](max) COLLATE Latin1_General_CI_AS NULL, [Privato] [bit] NULL, [LastUpdate] [datetime] NULL CONSTRAINT [DF_Attivita_LastUpdate] DEFAULT (getdate()), CONSTRAINT [PK_Attivita] PRIMARY KEY CLUSTERED ( [IDAttivita] ASC)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]How Can I create a trigger for modify the IDAttività Stato field in specific situaion: if IDAttivitaTipo == OK or == NOIDAttivitaStato must be set to CPlease note that I can write in the IDAttivitaStato field (during my code operation).... but I would like also automatic update if the IDAttivitaTipo is OK or NO Can you help me for create this with a trigger?Thanks
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them 1) Create the table 2) Create the trigger 3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value 4) Drop the trigger 5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
GO /************************************************ 2) - Create the trigger ************************************************/ CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table] INSTEAD OF INSERT AS BEGIN
INSERT INTO my_table ( forename, surname) SELECT forename, surname FROM inserted
END
/************************************************ 3) - Do the insert ************************************************/
INSERT INTO my_table ( forename , surname ) OUTPUT inserted.my_table_id INTO @my_insert VALUES( @forename , @surname )
select @@identity -- expect this value in @my_insert table select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************ 4) - Drop the trigger ************************************************/
drop trigger [dbo].[trig_my_table__instead_insert] go
/************************************************ 5) - Re-run insert from 3) ************************************************/ -- @my_insert now contains row expected with identity of inserted row -- i.e. OK
I need a trigger to know who and when a char(1) column is changed. Â Would like to write the audit trail to its own table I can query and record before and after values.
DDL:
CREATE TABLE [dbo].[Test]( [Customer] [varchar](12) NULL, [Active] [char](1) NULL DEFAULT ('N') --Must use char 1 b/c more than 2 possible values )
Insert into Test (Customer, Active) Values ('Acme','Y')..I want trigger to tell me whowhenwhere this value was changed. Â If using sql auth capture client windows id if possible and write to audit table Update Test set Active = 'N'
i realize this is a basic question, but i'd like advise on the best way to create a table to store financial time series data. i already have a table to store securityid which is the primary key. However, when i move over to the table to store time series, i will have many secid as well as different dates and types of data. what should my primary key-autonumbered or concatenated from secid and date etc...in addition, i want to have a good way to query the table to make sure there are no dupes (same secid and same data etc). many thanks
I am new to SQL 2005 and Reports. How can I create an automated weekly report for a database to show Disk usage and top 10 tables. I am after to something similar to the Summary report in SQL 2005. Advantage would be to have it email as well.
I have a search form in an ASP.NET/VB page. The form has the input text box and the button "search". The keywords are passed in the URL to results.aspx.
Here is an example of what I get in the URL, when I write the keywords "asp", "book" and "london" in the input text box and click "search": results.aspx?search=asp%20book%20london
The database table has 3 fields: "id", "title" and "description".
I want to display all the records where at least one of the keywords is found in any of the 2 fields "title" and "description".
1. I suppose I need to get the words out of the URL to be used by SQL. Maybe: string[] searchString = request.queryString("search").split('search'); ??? How can i make this run when page loads? I supose i need it. Right?
2. How should the SQL look? I supose i need to use the "Like" command SELECT * FROM books WHERE title LIKE ... But how to I use it if I can have 1, 2, 3, ... keywords?
Hi, how do I perform a simple insert command? I dont need the SQL syntax, just how do i do it using VS2005. using SqlDataSource, for some reason, after writing the insert sentence, the "next" button remains gray. i am using VS2005 and sql server.
I am trying to do a simple insert 3 items into 3 colms the table has 4 the 4th is an identity with a seed of 1
I am getting this error that i need an explicit val for the key
TABLE SCRIPT :
GO /****** Object: Table [dbo].[Company] Script Date: 03/30/2006 17:48:22 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[Company]( [idCompany] [int] IDENTITY(1,1) NOT NULL, [CompanyName] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, [Abreviation] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, [Sol] [varchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, CONSTRAINT [PK_Company] PRIMARY KEY CLUSTERED ( [idCompany] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF --SHOULDNT NEED THIS : --SET IDENTITY_INSERT dbo.Company ON
INSERT INTO COMPANY VALUES('AmericanExpressCheck','Amex','ax')
Msg 545, Level 16, State 1, Line 2 Explicit value must be specified for identity column in table 'Company' either when IDENTITY_INSERT is set to ON or when a replication user is inserting into a NOT FOR REPLICATION identity column.
INSERT INTO archivetitles (title_id, title, type, pub_id) SELECT title_id, title, type, pub_id FROM titles WHERE (pub_id = '0766')
How would I modify this if the table archivetitles had columns: titleid, title, newcolumn, type, pub_id and I wanted the newcolumn value to be null, but I still wanted to select the values from titles?
I use SQL code snippet to attach the CLR assembly (dll) to the SQL Server Express
CREATE ASSEMBLY [DatabaseAndImages] AUTHORIZATION [dbo] FROM 'C:CLR_File.dll' WITH PERMISSION_SET = SAFE
That file content CRL Codes for 10 Stored Procedures & 3 UDT & 5 Functions & 6 Triggers As you can see it's content large amount of DB objects !!
My Question is .. Is there any simple way can I use it to extract or automatic create all that Objects in the Database without use separate SQL Statement for each one ??
By Example , I will use this SQL statement to create the sp_AddImage that already located inside the CLR dll file
CREATE PROCEDURE [dbo].[sp_AddImage] @ImageID [uniqueidentifier], @ImageFileName [nvarchar](max), @Image [varbinary](max) WITH EXECUTE AS CALLER AS EXTERNAL NAME [DatabaseAndImages].[StoredProcedures].[sp_AddImage]
But as you know .. I have many objects .. and I am in development phase and I will do change to that object many time and also may I will add much more €¦
I thing it's not good to write SQL Statement for each object and do changes every time when I change the object definition
Is there any one line of SQL statement can I use it to automatically create and extract all the objects inside the assembly ?? Or is there any way to do that Issue by simple operation ??
Hello,I just started with ms sql. I need to insert data from some textboxes into ms sql 2000 database.I can't get it work.I'm trying this:"INSERT INTO tblUplate (ID_Uplata, JMB, IDOsnovaUplate, Iznos, Datum) Values('', ' + txtJMBUplate.Text + ', ' + ddVrstaPrihoda.SelectedItem + ', ' + txtIznos.Text + ', ' + DateTimePicker1.Value + ')"Is this wrong? Should I use + or & (like I used to use with MS Access)?Thanks
I have a textbox with the id of txtName it is a name text box. and I have a submit button. How do i get the value of the text in the text box to popluate a new row of data in my Sql Server database.
