Hello Guys,
Just wondering if someone can help me decrease the size of mdf and ldf files. In the past production database "NewUniverse" had been allocated space of 100 GB for mdf file and 8 GB of ldf file. However the data file has only used 30 GB of data. But now due to disk space related reason, I tried to decrease the datafile size from 100 GB to 40 GB. But I am not able to do it.
Any help in this regard would be appreciated.
Dear all,
I wanna ask you how to decrease log file size..?
For example i have database file with data file size is 122,166 Kb
and the database log file is 6,330,176 KB
Thanks,
Oko Sakti Banget
Hi all,
How to derease the database file size in Primary filegroup.
Thanks,
Hi
I installed " Web Wiz Forum ASP SQL 2000 DB "
it work fine but
when i added some data in the forum for example my db size is 1.45 MB
after i delete those data the db size will not decrease
is there any code that i must enter on the sql server setup file
Excuse me i asked this question in the web wix forum site but they don`t
answer me
if know what i must to do plz tell me
Thanks
I have a database that the transaction log grows about 1 GB per day. I would like this size was decreased daily. Does anyone have any suggestions?
Some friends told me that after the Full backup that is done daily, I should perform a backup of transanction log with option to truncate and after, make a shrink in the database. That is exactly what should be done?
Thank you,
Best Regards,
Ralph Haddad
Hi,
My DB size (Right click on DB Name, Data Files tab, Space Allocated field) was 10914 MB.
I delete a huge table (1.2 million records * 15 columns).
I checked the db size again. It didnt change.
Shouldn't it decrease because I delete a huge table ??
I have a database consisting of two main tables and 12 sub tables.
This was leading to increase in database size. So we thought of storing the sub tables data in the main tables in form of xml  in a column of varchar(2000) type.
So we created a new database that only had 2 tables and we stored the data of the sub tables in the new column of the main table.
Surprisingly we saw that the database size increased rather than decreasing .
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I have a database whose log file size is 4 time greater then data file size, and its continuously growing day by day. Recently face limited disk related issue.
Is there any way to truncate log file???
What is impact on db if i truncate log file???
Is there any way to prevent this file continuously growing???
Hi,
i'm trying to write this script that check my database file and log size(in MB) and insert them into a table.i need the following columns
dbid,dbname,compatability_level,recovery_model,db_size_in_MB,log_size_in_MB.
i try to write this a got stuck.
select sysdb.database_id,sysdb.name,sysdb.compatibility_level,
sysdb.recovery_model_desc,sysmaster.size from sys.databases sysdb,sys.master_files sysmaster
where sysdb.database_id = sysmaster.database_id
can anyone help me with this script?
THX
SELECT size_in_mb,used_size_in_mb,size_in_mb-used_size_in_mb as free_in_mb FROM (
SELECT cntr_value/1024 size_in_mb ,
(SELECT cntr_value/1024 FROM master..sysperfinfo WHERE counter_name='Log File(s) Used Size (KB)' AND instance_name='mydb') used_size_in_mb
FROM master..sysperfinfO WHERE counter_name='Log File(s) Size (KB)' AND INSTANCE_NAME='mydb'
) a
I need to store totalsize,usedsize,freesize of the datafiles in a table to get an average of how much my datafile has increased over a week.
The above query i am using is for logfile size. Can any one help me with datafile size plz.
I've checked sp_helpfile, sysfiles but couldn't find what i am lookin for(used and free space). EM in taskpad view for a database shows the statistics for the datafile. I've tried a trace to find out a stored procedure but couldn't!!!
May be i am unaware of a simple stored-procedure that can do this for me.
Howdy!
how can i change the initial size of the data and log file size ??? in my database properties it shows that my data file size is 81 mb and log file size is 985 mb! but my database only contains some tables and stored procedures with few rows of data in each tableand i checked that the actual mdf and ldf files are really that big... i tried to change it but it didn't work...can someone please teach me how to change it thanks!
View 2 Replies View RelatedHi All,
Is it possible to increase the size of data file in SQL Server 2005 Express Edition.
I think the licensed limit is 4096MB whcih i am unable to increase.
Could anyone let if is it possible to increase the data file size and if yes then how?
Thanks,
Varun
I'm new to the DBA world, and have no one else in the company to look up to. Does anyone know what I might need to check out or do when the Data File Size is 204% full? Or is this not necessarily a bad thing?
I'm getting this from a Diagnostic tool I have.
The number of tables is 148
Data file size 35,941 MB
Data Size 26,549.92 MB
Index Size 177,130.02 MB
Log File Size 5.05 MB
Thanks,
I am looking to automate monitoring space used for each file in eachdatabase on a SQL Server 2000. Does anybody have any SQL Scripts to dothis or to find the space used?
View 1 Replies View RelatedHi All,
Is it possible to increase the data file size in SQL Server 2005 Express edition?
If yes then how?
Thanks,
Varun
I've set up an alert to email me whenever the database is over a certain size. The amount is calculated by taking 80% of the total data file size. The problem I'm having is that it keeps generating a false positive alert because MS SQL seems to treat the currently used value as the total allocated space for the database data file. For example, the data file is 100MB, it's currently using 60MB, and if I enter 80MB in the alert, it generates an email alert claiming the current size is 100MB. Could it be because the data file size is set to 100MB (since autogrowth is disabled)?
View 4 Replies View RelatedMy primary (and only) data file has reached the point where it is auto growing. I would like to grow this file in one big chunk at an off peak time. I can't seem to find the code I need to make the file grow when I want it to?
View 1 Replies View RelatedI encounter one weird problem, I have a database with around 7 GB ...when I delete a bunch of data from it, it suppose to reduce thedatabase file size, but weirdly, the file size increase to 8 GB.Wondering why. Is it suppose to be like that?Is it the architecture is designed to work like that?Is there any way for me to reduce the database file size?Thanks.Peter CCH
View 2 Replies View RelatedHi
I am trying to track the size of my SQL Server database. Could someone please tell me if the "Data File Size (KB)" counter of the "Databases" performance object of SQL Server actually gives the size of the database?
I dont know if i have posted this query in the correct category, sorry if i haven't, but could not find any suitable category for this thread.
Thanks in advance
I have a sharepoint content database in sql 2008 R2 (WSS_Content) that is at 230Gb size, but has 40% of it is empty space. Â This is because we have removed a large amount of old content from sharepoint. Â The log file is fine. Â I have 60GB left in my drive that host the database files. Â I would like to shrink the datafile to get disk space back. Â I found that under the files property, the WSS_Content data file's initial size is 228702 MB (220 Gb or so). Â
When i try to do a shrink file (data file) from management studio, i see the 60 GB of drive space keep dropping. Â So i have to kill the process. what i should do to reduce this data file.
why it keep using up all the free space in the drive when i try to shrink the data file?
We have installed SQL Server 2008 R2 SP1 instance and it's having Share Point 2010 databases.
We have 2 dedicated drives for Tempdb on SAN with 50 GB space. Both tempdb data & log files are created with default size. I would like to presize them.
What are the best values to start with?
U ->Tempdbdata having tempdb.mdf file
V->Tempdblog having templog.ldf file
How to estimate the size of datafile while creating the database?
View 2 Replies View RelatedNeed to confirm if we can add space(increase data file size) for the database which is configured for always on similar to that of mirroring or we need to follow any different procedure.
I have a requirement wherein the datafiles on both the primary and secondary replica got full, if i add space to the primary database will it automatically get added to the secondary replica or not?
I have a SSIS package that opens an xml file, puts the contents into a string, then runs a stored procedure that dumps it into an xml column in a table. One of the xml files is huge. Putting the data into a ssis string causes an error. The length of the string variable is 58,231,886. The file will only get bigger.
How else can I get this data into a SQL Server XML field.
I have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
Any ideas?
Stacy
Greetings:
I have a database that is 1.7terabyte in size with 136gb free and throws a "transport level error" telling me to discard the results when I run dbccshrinkfile ('DBNAME', size). I have tried various increments of size, from truncateonly to 1MB below its current value, and nothing works. I have tried to detach and reattach the db, restart the service, restart the server, and none have provided a solution. Any ideas?
Regards,
Derek
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
I have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedHi, I have a problem importing data from SQL Server 2000 'text' columns to SQL Server 2005 nvarchar(max) columns. I get the following error when encountering a transfer of any column that matches the above.
The error is copied below,
Any help on this greatly appreciated...
ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode data is odd byte size for column 3. Should be even byte size.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
Many thanks
I want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View Related