In my ASP.Net, for every SqlDataSource instance, I end up duplicating the following ASPX line
ConnectionString="<%$ ConnectionStrings:MyDb %>
Is-it possible to define a default ConnectionString at a website-wide level?
Thanks in advance,
Joannès
http://www.peoplewords.com
Greeting SQLers,
I'm attempting to define a Default value for a new user-defined-datatype in SQL Server 6.5, but can't as the dropdown list only allow (none) value!
Anyone can help? TIA.
hallo
i am on the very beginning with sql.s,
how can i define a default value for the table field like its possible in access,
for example: the if the user not gonna enter a val so there is a default val predefined in the table field,
for example i would like to predefine the date now on the smalldate field....
thanks
I am designing a new table with a few columns that may or may not havea value on each row that is inserted.What issues determine whether to allow a NULL value to be inserted forthat column or define a default value to be used?I want to think through the repercussions of this decision before I getinto production.
View 3 Replies View RelatedHi,
I am getting the following error when I use the Membeship Controls w/ Roles enabled.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I use ROOT>USER>WEBSITE for FTP Directory Setup.
If i need to change my old ways please inform me on the best direction.
I have a report which will one day display some data from an analysis services cube. my first step is to create a drop down parameter enabling the user to choose the date. I'd like to display only dates that have data, and I'd like it to default to today.
So I've created a dataset that will be the datasource for the dropdown displaying the available non-empty dates, which works fine.
SELECT measures.turnover ON COLUMNS,
nonempty([TBL DIM DATE].[DATE_ONLY].[DATE_ONLY].ALLMEMBERS ) ON ROWS
FROM [Itdev1 Hk]
I've also set the report parameter up to be a queried paramter,and to use the above dataset as it source, with [DATE_ONLY] displayed. and [DATE_ONLY] as the value.
Now, how do I get it to default to the last valid member in the list?
Can someone please explain how i would define a multi-valued default parameter within the report Properties -> Parameters. I have an OLAP based report with multi-value parameters. I do not want to set the default values from within BIDS. Instead, I'd like to do this from the ReportServer (after report deployment). I have no problem when i enter a single value as a 'default value', for example:
ReportParm1 String [Deal Dim].[Shelf].&[AAM]
But, how would i define it with multiple values as a 'default value' ?, for example:
ReportParm1 String [Deal Dim].[Shelf].&[ABC] , [Deal Dim].[Shelf].&[DEF]
NOTE: It appears that you cannot use expressions, such as the 'split' function in the 'default value' space.
Any help would be greatly appreciated.
thank you.
what is default website for named instances in Reporting services?
View 1 Replies View RelatedCannot deploy reports to default website get error msg..
'A connection could not be made to the report server http://localhost/ReportServer'
additional information:
The request failed with http status 400: Bad Request. (Microsoft reporting Services Designer)
Hi, I want to modify the layout and stuff of the main reporting page...but I'm not sure how to open it ... is there a project for it that gets installed on the server?
I've seen some video demos on the microsoft site and they had some pretty nice front ends set up. I'd like to put some actual metrics on that front page and set up some links and different layouts.
Can someone please at least point me in the right direction to do this? I'm hoping it doesn't require setting up an entirely new site from scratch.
Thanks,
Roxanne
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DBConnection.open() +12
ASP.global_asax.Session_Start(Object sender, EventArgs e) +35
System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182
System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
is there any way I can setup the default transactional level at the Database level instead.
Such as I don't want to write the transaction isolation level at every SQL statement.
What is the default transaction isolation level for SQL Server?
and Advantages of having multiple filegroups ?
Hi everyone,
I'm seeing that for DTS (2000) are Read-Commited and for SSIS is Serializable.
Could you please confirm that?
Along with this I see another little thing: by default too on a DTS packages you have "Limit the maxim number of tasks executed in parallel to: 4"
How to understand this topic thinking on SSIS?
Thanks a lot for your time,
Hi All,
I need to create a new field on a table and have that field default to another field value in that same table. Is there a way to do this w/ a default constraint rather than adding a trigger to the table? If i can't use a default constraint does anyone have a template trigger i could use? Below is an example of what i'm trying to do (Field_C is the new field and i want it to use Field_A value if no other value is specified on insert). Any help would be greatly appreciated.
alter table FOO add Field_C varchar(50) not null constraint FOO_default DEFAULT Field_A
thanks,
Dave
I want to perform column level and database level encryption/decryption....
Does any body have that code written in C# or VB.NET for AES-128, AES-192, AES-256 algorithms...
I have got code for single string... but i want to encrypt/decrypt columns and sometimes the whole database...
Can anybody help me out...
If you have Store procedure in SQL for the same then also it ll do...
Thanks in advance
Hi,
AM in need of SSRS 2005 design documents for a project purpose. Can somebody let me know where can i find these documents? Thanks in advance
When you utilize transactions in ADO.NET are the locks put on the entire TABLE used or at the row level?
For instance if you do a SELECT within a transaction if you only pull 5 rows out of a 1000 row table can you just make it lock the rows that have been pulled? It seems like it locks the entire table?
Thanks
Hi, Can anybody please explain me, what is low level and high level locking in SQL Server 2005 database.
Also what is the name of process which converts low level locking into high level locking and vise versa.
-Sanjeev
Hi..I'd very much appreciate it if someone would tell me how to translatea statement level trigger written in Oracle to its equivalent (if there isone)in MS SQL Server. Ditto for a row level trigger.If this is an old topic, I apologize. I'm very much a newbie to SQL Server.Regards,Allan M. Hart
View 2 Replies View RelatedI have to use a CTE based on conditions. But I am not able to write a common CTE and access it on different conditions.
Now I am duplicating the CTE definition inside each if condition. But I expects a solution like bellow to reduce code duplication.
For example
---- I need a common definition of CTE like this.
with CustomGroup( id)
as
(
Select id from Groups g
Inner join GroupStatus s on s.Id = g.Id
Where s.Status = €˜Active€™
)
IF @DisplyStatus=€?UserDetail€?
begin
<!--[if !supportLists]-->- <!--[endif]-->at present CTE is defined here.
select u.* from users u
inner join userGroups ug on ug.UserId = u.Id
inner join CustomGroup cg on cg.Id =ug.GroupId -- Accessing the CTE
end
else if @DisplyStatus=€?UserSimple€?
begin
<!--[if !supportLists]-->- <!--[endif]-->at present CTE is defined here.
select u.FirstName,u.LastName,u.DOB from users u
inner join userGroups ug on ug.UserId = u.Id
inner join CustomGroup cg on cg.Id =ug.GroupId -- Accessing the CTE
end
else if @DisplyStatus=€?UserWithAddress€?
begin
end
Please suggest possibilities, and your suggestions.
Hi, here am i back ..not sure it's possible to solve it in one query ...there are four tables:1) headquarters---------------hqID (primary key)hqname2) department---------------depID (primary key)depnamehqID3) reports----------repID (p. key)depIDuserID4) users--------userID (p.key)usernameI want to get in one query those four fields:hqID, hqname, depID, depname + varchar(number of distinct users that has made a report foreach department) . This last field is a concatenation.The complexity resides in the fact there is need for a COUNT among other fields ...E.g.: table reports may look like this: repID depID userID 1 1 1 2 1 1 3 1 3 4 3 6 5 4 8This gives:for dep 1: 2 distinct usersfor dep 2: 0for dep 3: 1 distinct userfor dep 4: 1 distinct userThanks for helpTartuffe
View 9 Replies View RelatedHi,i have a dropdownlist connected to a sqldatasource like this: <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1" DataTextField="Name" DataValueField="Name"> </asp:DropDownList>What i want is to put a particular value on the top of the dd. I can't use ORDER BY.e.g. the table which feeds the dd contains this:RDAhow to put value D on top of the dd?ThanksTartuffe
View 6 Replies View RelatedHow to define schemaname & how to qualify schemaname in SQL
statement.
Hello, everyone:
I need to define composite PK and FK for a ERD. Could someone offer the methods that work with,
1. T-SQL
2. ERD
Thanks a lot.
ZYT
I get the word TempleMode marked in Yellow. it's to clear all recoreds from my Pivot tables linked to SQL Database.
Sub ClearAllSheets()
On Error Resume Next
'Dim pt As PivotTable
Dim Sh As Worksheet
Dim refresh As Boolean
Dim tempMode As Boolean
Dim startTime As Date
[code]...
Is there a way to define a key that puts the text 'SELECT * FROM 'into the Query Analyzer window?I must type this about 50 times a day but cannot see a simple way ofdefining a key to write it for me..(tools/customize) seems to execute everything you put in there ratherthan leave it on the screen for me to add table names etc to.thanks for your time...
View 2 Replies View RelatedHi, all experts here,
I am having a question on defining the value of Periodicity_hint. e.g, I wanna predict the monthly sales amont of a product, and assume the data follows monthly patterns, then in this case, what value should we set for the periodicity_hint parametre?
Thanks a lot for your kind attention and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
Hi
I have a DropDownlist (Drop1) and a GridView,the GridView is bount to an SqlDataSource1 that has 2 Select parameters CatId and SourceId
The dropdownlist has a selectedvalue of the following format 15-10(2 numbers seperated by -).I want to set CatId to 15 and SourceId to 10
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Art %>"
SelectCommand="Select * from Option Where SourceId=@SourceId And CatId=@CatId">
<SelectParameters>
<asp:ControlParameter ControlID="Drop1" Name="SourceId" />
<asp:ControlParameter ControlID="Drop1" Name="CatId" />
</SelectParameters>
</asp:SqlDataSource>
Can anyone help me to define the parameters?
thanks
I've always created database tables with one Primary Key that increments by one for each new record. I'm working on a database that was built by someone else now that has a lot of defined foreign key relationships (under Tables > specific table > Keys). How helpful is it to define these Keys? I assume it helps make the database more efficient but is it necessary if you're working with small databases?
View 1 Replies View RelatedWhy is it not possible to define more than one relationship per table?
i have a primary table that i would like to cascade deletes to 2 other foreign tables in 2 separate relationships. why can't i do this and what are my alternatives?
thank you
Hi, I am trying to connect to my local SQL Server through a webform ( on VS.NET ). My web.config shows something like this -
sqlConnectionString="data source=IP address;Trusted_Connection=yes"and the tutorial I am following says something this - SqlConnection myConnection = new SqlConnection( "server=(local)\NetSDK;database=pubs;Integrated Security=SSPI");If I just replace the NetSDK either with my IP address or the servername (my machine name), I get a SQLException that server doesn't exist or access denied. I have specified "windows authentication". How do I correctly define my connection string ? Please guide me.Thanks,sbs.