How To Delete The Job Automatically After Successful Job Execution In DTS?
May 7, 2008
Hello Friends,
I am working on DTS package. I got a wonderful article of Davide Mauri.
http://www.sqlteam.com/article/how-to-asynchronously-execute-a-dts-package-from-asp-or-aspnet
I am using DTS package to update a table. I have done all the things that are stated in that article. Also there is a point
on how to delete the jobs automatically when the job execution is done so that we dont have to manually delete the jobs later
on.
The @delete_level does the trick. I thought it would work but after executing the DTS for a variable number of times I
got this error...
The specified @name ('dts1') already exists. Supply either @job_id or @job_name to identify the job. Supply either @job_id or
@job_name to identify the job. Supply either @job_id or @job_name to identify the job.
Now i am not getting what went wrong? I have implemented all steps given in that article.
Please see on how to delete the job
immediately upon successful execution. I dont want to create a 'n' number of job names every time.
Pl help on it.
Thank you,
Prashant...
View 3 Replies
ADVERTISEMENT
Jun 16, 2015
I have an SSIS Package which Retreives Data using a SQL Query like below
select a.* from dbo.test a (nolock)
JOIN dbo.test1 b (nolock)
ON a.DetailsId = b.DetailsId
JOIN dbo.test c (nolock) on c.DetailsLineId = b.DetailsLineId
where convert(date,c.CpPlacedDate)>?
and convert(date,c.CpPlacedDate) < convert(date,GETDATE())
and c.PartnerCode in ('akakak07')
The CpPlacedDate DataType is Datetime. After the Successfull Execution of SSIS Package the final output results in destination is lesser than source.
The Maximum of cpplaceddate in the Destination for a particular date is '2015-06-13 23:46:08.923'
The Maximum of cpplaceddate in the Source for a particular date is '2015-06-13 23:59:14.873'
I am missing 16 records in between this time Gap.
View 3 Replies
View Related
Jan 21, 2002
We ran a cmd file which includes dtsrun ... The last line of the DOS window came up with "DTSrun: Package execution complete", but the cmd window could not close automatically.
View 2 Replies
View Related
Nov 12, 2006
How can I delete tables in a SQLServer Database automatically (at the moment I just do it using Micorosft SQl Management Studio Express manually) But its important that I can do that automatically, the best thing would be if I can do that from a .NET programm. thanks in advance,mulata
View 6 Replies
View Related
Jul 31, 2002
I need to setup an automated process to delete all the files older than a month in a particular directory on a network drive, how is that possible? Any help is greatly appreciated.
thanks.
Sheila.
View 1 Replies
View Related
May 27, 2007
I have one stored procedure for insert, update and delete operations, I need automatically logged the insert,update and delete operations.
How can I set auto logged mechanism and how can I access the logs in c#?
Thanks
View 1 Replies
View Related
Sep 29, 2015
I would like to perform autodeletion operation from my table using stored procedure....
Here is my table structure:
Emp.id | emp_name | dept | desig | time_out | date | emp_sign |
if the user inserts new employee record that record should delete automatically from original after
30 minutes..I don't want to keep that newly inserted record after
30 minutes...I don't know how to achieve this...
View 12 Replies
View Related
Nov 11, 2014
I'm new to using SQL Server. I've been asked to optimize a series of scripts that queries over 4 millions records. I've managed to add indexes and remove a cursor, which increased performance. Now when I run the execution plan, the only query that cost is a DELETE statement from the main table. It shows a SORT which cost 71%. The table has 2 columns and a unique index. Here is the current index:
ALTER TABLE [dbo].[Qry] ADD CONSTRAINT [Qry_PK] PRIMARY KEY NONCLUSTERED
(
[QryNum] ASC,
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = ON, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
Question: Will the SORT affect the overall performance? If so, is there anything I should change within the index that would speed up my query?
View 5 Replies
View Related
Sep 14, 2000
I got the following error message when the scheduled DTS run for copiying the records from one server to another server.Actually it has copied successfully,but still returned this error?!There is a similar job on a different server doing the same thing returns a success message properly.?!!
Thanks for any help.
''...ding... DTSRun: Executing... DTSRun OnStart: Create Table request124 Step DTSRun OnError: Create Table request124 Step, Error = -2147217900 (80040E14) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 2714 (A9A) Error string: There is already an object named 'request124' in the database. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: Create Table request124 Step DTSRun OnStart: Copy Data from Results to request124 Step DTSRun OnProgress: Copy Data from Results to request124 Step; 10 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 10 DTSRun OnFinish: Copy Data from Results to request124 Step DTSRun: Package execution complete. Process Exit Code 1. The step failed.''
View 2 Replies
View Related
May 9, 2006
Hello,
I have a Job that runs a DTS package. This package in turns call several other packages. All individual packages run fines. When the main package is run manually it also runs fine. The jobs that calls the main package should be runnning for at least a couple of Hours maybe more and updtae several tables. It actually run nightly for only 20 minutes and doesn't update any tables. Yet it is in "successful"? Any thougts?
View 1 Replies
View Related
Aug 23, 2007
after moving off VS debugger and into management studio to exercise our SQLCLR sp, we notice that the 2nd execution gets an error suggesting that our static SqlCommand object is getting reused from the 1st execution (of the sp under mgt studio). If this is expected behavior, we have no problem limiting our statics to only completely reusable objects but would first like to know if this is expected? Is the fact that debugger doesnt show this behavior also expected?
View 4 Replies
View Related
Nov 13, 2001
I used Query Analyser to De-tach a SQL 7 database and that worked fine. The database became 'invisible' in Enterprise Manager and the entry was removed from the sysdatabases in Master. The mdf and ldf file remain in the file system. However, when I ran the sp to Attach the database QA said successful but it does not show in Enterprise Manager or in sysdatabases in Master. I'm going to run through the procedure again and if problems I'll check the logs but has anyone else had difficulty with this. Also with attaching the db to a SQL2000 install I believe the logins on the SQL7 install are not brought over. In my case, the client is using trusted logins with their database application so their is probably not a lot to manually recreate on the SQL 2000 install but doees anyone have nay sample code/script that can give me an idea of what is required in the area of getting logins out of the Master of SQL7 and into SQL2000.
Great forum...
Have a great day,
ChrisE
View 3 Replies
View Related
Apr 2, 2007
Hi All,I have a DTS package that runs calling a few stored procedures and anactiveX module. The package does some data cleanup and load. It takesan hour to complete. I have emails sent at the beginning and end ofthe package execution along with error notifications if any of thestep fails.The issue is that, the DTS runs successfully. I ran the package fromthe server and it completes. If I schedule it, it has been running forover a few months without any issues. One fine day hell broke looseand it started to give an attitude!!When the job is invoked automatically on the scheduled time, it runsthe package. Does what its supposed to do including sending out thefinal email. but is not finishing the job. The job says its stillexecuting but the final step has completed. I have tried logging thepackage, and it says completed the last step.. But the JOB Log hasn'twritten anything to the log file.. (Job Log is where I am logging thestep where I am calling the DTS).Has anyone have any idea what this issue is? I am at a dead end andhave no clue why this is happening. I am thinking of changing thewhole process but before that I want to try posting this.Any ideas, suggestions will be much appreciated. Please feel free tolet me know if there is any additional information you need in orderto troubleshoot this issue.Thanks in advance..Aravin.
View 2 Replies
View Related
Dec 3, 2006
I have a standard Login ASP.NET 2.0 control on a login Page, a LoginName and LoginStatus controls on the member's page.
once the user login successfully I am redirecting the user to Member.aspx page. The following is my machine configuration
Windows XP Pro Service Pack2
IIS 5.1
SQL Server 2000
visual Studio 2005
DISABLE ANONMYOUS ACCESS IN IIS
ENABLE WINDOWS AUTHENTICATION
I am Using form authentication, and I am getting following error "Your login attempt was not successful. Please try again".
To debug,I am displaying the follwoing properties
Membership.ValidateUser(Login1.UserName, Login1.Password) : - True
HttpContext.Current.User.Identity.Name : - // is blank
FormsAuthentication.FormsCookieName : - SqlAuthCookie
FormsAuthentication.CookieDomain :- // is blank
FormsAuthentication.CookieMode :- UseCookies
FormsAuthentication.CookiesSupported :- True
FormsAuthentication.DefaultUrl :- /webIT/default.aspx
FormsAuthentication.EnableCrossAppRedirects :- False
FormsAuthentication.FormsCookieName :- SqlAuthCookie
FormsAuthentication.FormsCookiePath :- /
FormsAuthentication.LoginUrl :- /webIT/ASPX/Security/Login.aspx
FormsAuthentication.RequireSSL :- False
FormsAuthentication.SlidingExpiration :- True
User.Identity.IsAuthenticated :- False
User.Identity.Name :- // is blank
User.Identity.AuthenticationType :- // is blank
Is it something to do with the security of Windows XP Pro ? or a IIS 5.1? Any help will be highly appreciated.
Login.aspx file is
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
</div>
<asp:Login ID="Login1" runat="server" DestinationPageUrl="~/Member.aspx" RememberMeSet="True">
</asp:Login>
</form>
</body>
</html>
Member.aspx is
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Member.aspx.cs" Inherits="Member" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
You are back ........
<asp:LoginName ID="LoginName1" runat="server" />
<asp:LoginStatus ID="LoginStatus1" runat="server" LogoutAction="Redirect" LogoutPageUrl="~/Login.aspx" />
</div>
</form>
</body>
</html>
Member.aspx.cs
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
public partial class Member : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
Response.Write("<br/>Page.User.Identity.Name: " + Page.User.Identity.Name);
Response.Write("<br/>Page.User.Identity.IsAuthenticated: " + Page.User.Identity.IsAuthenticated);
Response.Write("<br/>Page.User.Identity.AuthenticationType: " + Page.User.Identity.AuthenticationType);
}//end
}
Web.config file is
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<connectionStrings>
<clear />
<add name="SQL_CONNECTION_STRING"
connectionString="server=Sample;database=sample;user id=sa;password=temp;"
providerName="System.Data.SqlClient"
/>
</connectionStrings>
<system.web>
<authentication mode="Forms">
<forms name="SqlAuthCookie"
loginUrl="~/ASPX/Security/Login.aspx"
timeout="60"
domain=""
path="/"
protection="All"
requireSSL="false"
slidingExpiration="true"
defaultUrl="default.aspx"
cookieless="UseCookies"
enableCrossAppRedirects="false"
/>
</authentication>
<!-- Deny Access to anonymous user -->
<authorization>
<deny users="?" />
<allow users="*"/>
</authorization>
<!-- SQL Server Memebership Provider's-->
<membership defaultProvider="SqlProvider"
userIsOnlineTimeWindow="30">
<providers>
<clear />
<add connectionStringName="SQL_CONNECTION_STRING"
enablePasswordRetrieval="false"
enablePasswordReset="true"
requiresQuestionAndAnswer="true"
passwordFormat="Hashed"
applicationName="webIT"
name="SqlProvider"
type="System.Web.Security.SqlMembershipProvider" />
</providers>
</membership>
<!-- SQL Server RoleManager Provider's-->
<roleManager enabled="true"
cacheRolesInCookie="true"
cookieName=".ASPXROLES"
defaultProvider="SqlRoleProvider">
<providers>
<clear />
<add connectionStringName="SQL_CONNECTION_STRING"
applicationName="webIT"
name="SqlRoleProvider"
type="System.Web.Security.SqlRoleProvider" />
</providers>
</roleManager>
</configuration>
NOTE : The applicationName is same in web.config as well as in the aspnet_Applications table in SQL Server 2000 membership database.
View 22 Replies
View Related
Sep 10, 2007
Can I tell from the MSDB tables if a particular db backup was successful? SS2000.
Thanks,
Michael
View 1 Replies
View Related
May 20, 2006
Hi all,
when I tried to integrate SP1 into my install media (32bit Developer Edition) by using
msiexec /i sqlrun_sql.msi shortfilename=true /p sqlrun_sql.msp
using the msp from an extracted SP1 full web download I ended up with a modified msi file. But installing from this one I received an error:
"sysdbupg.sql.<some_guid> was not found in Sql.CAB"
Any ideas how to fix that?
With best regards,
Artus
View 5 Replies
View Related
Apr 23, 2007
Ok, here is the deal. In T-SQL, an error is handled depending on its severity. For example, a severity of 15 or less (or is it 10 or less? doesn't matter) will only raise a warning that can be caught through the message event. 16 or higher (or whatever) will cause an exception to be thrown on the .NET side, and 20 or higher causes the connection to be closed.So far so good.Now here's my issue: I have a stored procedure that does 2 queries (inside the same SP). Sometimes, the first query will succeed, while the second one will cause an error of severity 16. Again, in .NET that will throw an exception, making me unable to fetch the first resultset (which I require for logging purpose). If the error was, let say, severity 9, I could simply subscribe to the message event to get my error, yet still be able to get the first result set. But unfortunately life isn't perfect, and the error is indeed a severity 16.Anyone know of a way to be able to get the first result set, even if the second query (within the same SP) completly fails?
View 2 Replies
View Related
Jan 14, 2008
I'm running a pretty standard insert command on a button (myCommand.ExecuteNonQuery();)
I have a few other methods that run, but I only want them to proceed if the above was inserted successfully, how would i check that?
View 8 Replies
View Related
Jul 9, 2001
Is there a Systems Table that tells you whether or not the backup job completed or not? Help?
'
View 3 Replies
View Related
Dec 7, 2011
After a successful transaction (after committing), I found that i sent wrong records of one the column (wrongly updated). How do I get back my initial stage? I mean, how do I get back all the previous results? Is there a way to retrieve my previous data which were before committing a transaction?
View 1 Replies
View Related
Sep 11, 2006
I've installed 2005 / RS on my testing server several times, no problem.
My production server throws an error when Reporting Services is installed. There are a few threads on this error:Microsoft SQL Server 2005 Reporting Services -- Error 29528. The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
I've Googled several similar complaints which discuss any of:
Ensure IIS default web site is set to "All Unassigned" Ip[/*]Delete the RS Web services pool and retry[/*]Install RS separately[/*]
The first two do nothing for the problem. While installing RS separately doesn't generate an error, it also doesn't create the RS databases.
Can the databases be created separately after installation?
Anyone have another fix for this problem?
Sam
View 4 Replies
View Related
May 18, 2007
I run XP Professional on a home machine. I recently installed VB 2003 with MSDE. When I go to the server explorer window, right click to add a connection, the Data Link properties dialog box pops up as it should. I select the name of home server, indicate integrated security, and select a sample database such as model or master from the list. The test connection is successful and clicking OK causes the connection to appear in the Server Explorer window. Yet when I go to open the connection, there is no data. The folders for Tables, Stored Procedures and so forth appear but they are empty. I have another 2000 database that a friend sent me. If I try to indicate in the Data Link propetries dialog box that I would like to attach this database, I get the same symptom. Test connection successful, yet when I create and open this connection, the folders are empty. I am a newbie to ADO .NET and I am not sure where to begin. Can someone help?
View 3 Replies
View Related
Mar 18, 2007
I keep receiving the error message below when I try to connect to SQL Management Studio
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
I have tried all of the suggestions in Google, in the forum, etc with not success.
I have enabled the
Named Pipe protocol/ Shared Memory protocol
SQL Server browser is enables
I even tried changing the SQL Server 2005 Shared Surface Configuration with no success.
I did not have this problem until the day light saving time change. I know this may having nothing to do with it but I need some help pronto.
In the error log I have the following error
Could not connect because the maximum number of '2' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>]
Error: 17809, Severity: 20, State: 1.
Not sure what to do or if the problems are related.
HELP, please!!!
View 4 Replies
View Related
Dec 7, 2005
Hi I am slowly getting to grips with SQL Server. As a part of this, I have been attempting to work on producing more efficient queries. This post is regarding what appears to be a discrepancy between the SQL Server execution plan and the actual time taken by a query to run. My brief is to produce an attendance system for an education establishment (I presume you know I'm not an A-Level student completing a project :p ). Circa 1.5m rows per annum, testing with ~3m rows currently. College_Year could strictly be inferred from the AttDateTime however it is included as a field because it a part of just about every PK this table is ever likely to be linked to. Indexes are not fully optimised yet. Table:CREATE TABLE [dbo].[AttendanceDets] ([College_Year] [smallint] NOT NULL ,[Group_Code] [char] (12) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Student_ID] [char] (8) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,[Session_Date] [datetime] NOT NULL ,[Start_Time] [datetime] NOT NULL ,[Att_Code] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY]GO CREATE CLUSTERED INDEX [IX_AltPK_Clust_AttendanceDets] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [All] ON [dbo].[AttendanceDets]([College_Year], [Group_Code], [Student_ID], [Session_Date], [Start_Time], [Att_Code]) ON [PRIMARY]GO CREATE INDEX [IX_AttendanceDets] ON [dbo].[AttendanceDets]([Att_Code]) ON [PRIMARY]GOALL inserts are via an overnight sproc - data comes from a third party system. Group_Code is 12 chars (no more no less), student_ID 8 chars (no more no less). I have created a simple sproc. I am using this as a benchmark against which I am testing my options. I appreciate that this sproc is an inefficient jack of all trades - it has been designed as such so I can compare its performance to more specific sprocs and possibly some dynamic SQL. Sproc:CREATE PROCEDURE [dbo].[CAMsp_Att] @College_Year AS SmallInt,@Student_ID AS VarChar(8) = '________', @Group_Code AS VarChar(12) = '____________', @Start_Date AS DateTime = '1950/01/01', @End_Date as DateTime = '2020/01/01', @Att_Code AS VarChar(1) = '_' AS IF @Start_Date = '1950/01/01'SET @Start_Date = CAST(CAST(@College_Year AS Char(4)) + '/08/31' AS DateTime) IF @End_Date = '2020/01/01'SET @End_Date = CAST(CAST(@College_Year +1 AS Char(4)) + '/07/31' AS DateTime) SELECT College_Year, Group_Code, Student_ID, Session_Date, Start_Time, Att_Code FROM dbo.AttendanceDets WHERE College_Year = @College_YearAND Group_Code LIKE @Group_CodeAND Student_ID LIKE @Student_IDAND Session_Date <= @End_DateAND Session_Date >=@Start_DateAND Att_Code LIKE @Att_CodeGOMy confusion lies with running the below script with Show Execution Plan:--SET SHOWPLAN_TEXT ON--Go DECLARE @Time as DateTime Set @Time = GetDate() select College_Year, group_code, Student_ID, Session_Date, Start_Time, Att_Code from attendanceDetswhere College_Year = 2005 AND group_code LIKE '____________' AND Student_ID LIKE '________'AND Session_Date <= '2005-11-16' AND Session_Date >= '2005-11-16' AND Att_Code LIKE '_' Print 'First query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds' Set @Time = GetDate() EXEC CAMsp_Att @College_Year = 2005, @Start_Date = '2005-11-16', @End_Date = '2005-11-16' Print 'Second query took: ' + CAST(DATEDIFF(ms, @Time, GETDATE()) AS VarCHar(5)) + ' milli-Seconds'GO --SET SHOWPLAN_TEXT OFF--GOThe execution plan for the first query appears miles more costly than the sproc yet it is effectively the same query with no parameters. However, my understanding is the cached plan substitutes literals for parameters anyway. In any case - the first query cost is listed as 99.52% of the batch, the sproc 0.48% (comparing the IO, cpu costs etc support this). BUT the text output is:(10639 row(s) affected) First query took: 596 milli-Seconds (10639 row(s) affected) Second query took: 2856 milli-SecondsI appreciate that logical and physical performance are not one and the same but can why is there such a huge discrepancy between the two? They are tested on a dedicated test server, and repeated running and switching the order of the queries elicits the same results. Sample data can be provided if requested but I assumed it would not shed much light. BTW - I know that additional indexes can bring the plans and execution time closer together - my question is more about the concept. If you've made it this far - many thanks.If you can enlighten me - infinite thanks.
View 10 Replies
View Related
Aug 3, 2007
Hello :
How to execute a procedure stored during execution of the report, that is before the poster the data.
Thnak you.
View 4 Replies
View Related
Feb 10, 2006
hello,
I'm new to store procedure in slq 2000.
I want to create a sproc in my sql 2000 sevrer,I have a table named "Supplier",
now I want to return my identiy field value when I use insert into sql command (insert into "Supplier") successful.
So how to create this store procedure ?
much thanks
View 6 Replies
View Related
Jul 5, 2000
I wish to have a batch file exit with a return code of 3 if it fails.
In the batch file I have the single command: Exit 3
On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
View 1 Replies
View Related
Apr 20, 1999
I am performing the following scheduled database checks every night on all SQL databases after the backup:
SQLMAINT.EXE -D DBSpscb -CkDB -CkAl -CkTxtAl -CkCat -UpdSts -Rpt S:LOGSSQLDAT~1(Check)DBSpscb.rpt
I check over 60 databases but this one fails every night with no history message at all, yet the log indicates that it was successful:
SQLMAINT.EXE Process Exit Code: 0 (Success)
If I manually run the scheduled task again, the log is identical and it indicates as successful in SQL Enterprise Manager.
Any clues as to what is going wrong would be greatly appreciated...
Thanks & Regards,
Wayne
View 1 Replies
View Related
Feb 2, 2004
Hi all,
Im not really sure if this is a PHP or and SQL problem but here goes.
Im using MSSQL and have developed a webpage that enables users to run various PACKAGES manually, however I need to display if the package has been successfully run.
Is there a system table that logs package information or is there a PHP function that I can use.
Thanks
P.s I know there are some system tables with the information for jobs but I do not want to create a job for each package.
View 1 Replies
View Related
Nov 28, 2007
Hi There
I need to get the last or more recent successful login of user id to their database
From which table/column or view I can get the audit data?
Can you help me with the query?
Thanks in advance
View 7 Replies
View Related
Sep 15, 2007
More than 10 times, i validated the package can be executed successfully, if i use a SQL job to run this package. All data and function goes well, however the job result reported failure after i saw the job 100% completed.
That 's so weird.
Anyone met the same the issue.
Could anyone give me some suggestion or hints?
Debugged it frustrateed~~
View 1 Replies
View Related
May 14, 2008
Hi
I am using a XML source and an oldedb destination to load an XML file into a database, the XML and corresponding XSD are provided by a different system and I dont have any control on them.
In the data flow I can see all the tables in the schema and I can map the columns, however when I run the package it validates fine, and then completes without going into the execution mode, its all green but doesnt load any data. Its weird and I cannot figure out if it is an XML or XSD problem, any idea?
Thanks
View 5 Replies
View Related
Sep 25, 2007
I have code that has worked just fine for some time, and now all of the sudden I am having an issue. I have a simple INSERT statement built and then make the following call:
RecordID = cmd.ExecuteScalar
I have never had a problem with this before. The RecordID of the newly inserted record is returned into the RecordID Integer varibale. All of the sudden, the varibale has a value of 0 (null I assume is being returned), but yet the INSERT worked just fine. I can check the table in SQL and it is populated with no issues.
No exception is thrown of any type or anything. Does anybody know what may be happening?
View 7 Replies
View Related
